! Started logfile: /scr/pima/bg219h_uvs/J0500+2651_X_dfm.log on Thu May 19 22:08:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0500+2651_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0500+2651_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J0500+2651
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30744 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0500+2651_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002294Jy  sigma=25.253448
! Fit after  self-cal, rms=0.959653Jy  sigma=24.191675
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7192 mas, bmaj=1.477 mas, bpa=-2.094 degrees
! Estimated noise=0.337014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0336191 Jy
! Component: 100  -  total flux cleaned = 0.0409673 Jy
! Total flux subtracted in 100 components = 0.0409673 Jy
! Clean residual min=-0.002297 max=0.002414 Jy/beam
! Clean residual mean=0.000001 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.0409673 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0409673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061924Jy  sigma=1.433963
! Fit after  self-cal, rms=0.059931Jy  sigma=1.381417
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00378932 Jy
! Component: 100  -  total flux cleaned = 0.00432922 Jy
! Total flux subtracted in 100 components = 0.00432922 Jy
! Clean residual min=-0.002202 max=0.002169 Jy/beam
! Clean residual mean=0.000000 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.0452965 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0452965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059773Jy  sigma=1.378341
! Fit after  self-cal, rms=0.059770Jy  sigma=1.378290
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9123 mas, bmaj=1.752 mas, bpa=-0.9621 degrees
! Estimated noise=0.171561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000866555 Jy
! Component: 100  -  total flux cleaned = -0.00142278 Jy
! Component: 150  -  total flux cleaned = -0.00160098 Jy
! Component: 200  -  total flux cleaned = -0.00172357 Jy
! Total flux subtracted in 200 components = -0.00172357 Jy
! Clean residual min=-0.000961 max=0.001145 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.043573 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.043573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059754Jy  sigma=1.377893
! Fit after  self-cal, rms=0.059740Jy  sigma=1.377790
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9123 x 1.752 at -0.9621 degrees (North through East)
! Clean map  min=-0.00089461  max=0.045281 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        0.94     KP        1.10     
!   LA        0.97     MK        1.03     NL        1.03     OV        1.09     
!   PT        1.07     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        0.90     KP        1.03     
!   LA        0.92     MK        1.19     NL        1.07     OV        1.09     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.91     KP        1.01     
!   LA        0.98     MK        1.04     NL        0.98     OV        1.05     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.08     HN        0.96     KP        1.06     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.04     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.89     KP        1.14     
!   LA        0.95     MK        1.06     NL        0.93     OV        1.07     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.90     KP        1.03     
!   LA        0.97     MK        1.11     NL        1.04     OV        1.03     
!   PT        1.05     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        0.89     KP        1.06     
!   LA        0.93     MK        0.98     NL        1.09     OV        0.95     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.94     KP        1.00     
!   LA        1.01     MK        0.95     NL        1.04     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.87     KP        1.15     
!   LA        0.96     MK        1.02     NL        1.02     OV        0.97     
!   PT        1.04     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.84     KP        1.13     
!   LA        1.00     MK        0.96     NL        0.94     OV        1.01     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.059740Jy  sigma=1.377790
! Fit after  self-cal, rms=0.058901Jy  sigma=1.375163
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9121 mas, bmaj=1.746 mas, bpa=-1.069 degrees
! Estimated noise=0.172146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258747 Jy
! Component: 100  -  total flux cleaned = 0.000282485 Jy
! Component: 150  -  total flux cleaned = 0.000288503 Jy
! Component: 200  -  total flux cleaned = 0.000288728 Jy
! Total flux subtracted in 200 components = 0.000288728 Jy
! Clean residual min=-0.000915 max=0.000944 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0438617 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.0438617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058899Jy  sigma=1.375113
! Fit after  self-cal, rms=0.058901Jy  sigma=1.374837
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058901Jy  sigma=1.374837
! Fit after  self-cal, rms=0.059035Jy  sigma=1.373312
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9109 mas, bmaj=1.748 mas, bpa=-1.077 degrees
! Estimated noise=0.172758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231361 Jy
! Component: 100  -  total flux cleaned = 0.000239039 Jy
! Component: 150  -  total flux cleaned = 0.000238937 Jy
! Component: 200  -  total flux cleaned = 0.000239247 Jy
! Total flux subtracted in 200 components = 0.000239247 Jy
! Clean residual min=-0.000850 max=0.000885 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.0441009 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 23 components and 0.0441009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059032Jy  sigma=1.373273
! Fit after  self-cal, rms=0.059047Jy  sigma=1.373107
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-34, 50.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000344907 Jy
! Component: 100  -  total flux cleaned = 0.000423572 Jy
! Component: 150  -  total flux cleaned = 0.000459888 Jy
! Component: 200  -  total flux cleaned = 0.000477772 Jy
! Total flux subtracted in 200 components = 0.000477772 Jy
! Clean residual min=-0.000811 max=0.000872 Jy/beam
! Clean residual mean=-0.000001 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.0445787 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 37 components and 0.0445787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059034Jy  sigma=1.372864
! Fit after  self-cal, rms=0.059031Jy  sigma=1.372804
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059031Jy  sigma=1.372804
! Fit after  self-cal, rms=0.058881Jy  sigma=1.372584
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9096 mas, bmaj=1.748 mas, bpa=-1.058 degrees
! Estimated noise=0.172914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132019 Jy
! Component: 100  -  total flux cleaned = 0.000227459 Jy
! Component: 150  -  total flux cleaned = 0.000280832 Jy
! Component: 200  -  total flux cleaned = 0.000321146 Jy
! Total flux subtracted in 200 components = 0.000321146 Jy
! Clean residual min=-0.000769 max=0.000856 Jy/beam
! Clean residual mean=-0.000002 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0448999 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0448999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058877Jy  sigma=1.372508
! Fit after  self-cal, rms=0.058875Jy  sigma=1.372470
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.0181e-05 Jy
! Component: 100  -  total flux cleaned = 8.16619e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110037 Jy
! Component: 200  -  total flux cleaned = 0.000123112 Jy
! Total flux subtracted in 200 components = 0.000123112 Jy
! Clean residual min=-0.000777 max=0.000853 Jy/beam
! Clean residual mean=-0.000002 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.045023 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.045023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058873Jy  sigma=1.372432
! Fit after  self-cal, rms=0.058873Jy  sigma=1.372429
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058873Jy  sigma=1.372429
! Fit after  self-cal, rms=0.058980Jy  sigma=1.372413
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.001 mas, bmaj=2.675 mas, bpa=-0.5833 degrees
! Estimated noise=0.218241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00031619 Jy
! Component: 100  -  total flux cleaned = 0.000429006 Jy
! Component: 150  -  total flux cleaned = 0.000461392 Jy
! Component: 200  -  total flux cleaned = 0.000474292 Jy
! Total flux subtracted in 200 components = 0.000474292 Jy
! Clean residual min=-0.000795 max=0.001027 Jy/beam
! Clean residual mean=-0.000004 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0454973 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.0454973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058980Jy  sigma=1.372416
! Fit after  self-cal, rms=0.058981Jy  sigma=1.372398
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-34.8, -18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000996405 Jy
! Component: 100  -  total flux cleaned = 0.00153215 Jy
! Component: 150  -  total flux cleaned = 0.00178987 Jy
! Component: 200  -  total flux cleaned = 0.00191349 Jy
! Total flux subtracted in 200 components = 0.00191349 Jy
! Clean residual min=-0.000670 max=0.000783 Jy/beam
! Clean residual mean=-0.000001 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0474108 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 74 components and 0.0474108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058967Jy  sigma=1.372071
! Fit after  self-cal, rms=0.058965Jy  sigma=1.371988
! Inverting map 
! Added new window around map position (23, 50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000609971 Jy
! Component: 100  -  total flux cleaned = 0.000847786 Jy
! Component: 150  -  total flux cleaned = 0.00107549 Jy
! Component: 200  -  total flux cleaned = 0.0011692 Jy
! Total flux subtracted in 200 components = 0.0011692 Jy
! Clean residual min=-0.000688 max=0.000677 Jy/beam
! Clean residual mean=-0.000001 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.04858 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 95 components and 0.04858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058958Jy  sigma=1.371818
! Fit after  self-cal, rms=0.058956Jy  sigma=1.371781
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.909 mas, bmaj=1.749 mas, bpa=-1.053 degrees
! Estimated noise=0.173268 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.909 x 1.749 at -1.053 degrees (North through East)
! Clean map  min=-0.00082133  max=0.045647 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7177 mas, bmaj=1.475 mas, bpa=-2.492 degrees
! Estimated noise=0.339775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360071 Jy
! Component: 100  -  total flux cleaned = 0.04396 Jy
! Component: 150  -  total flux cleaned = 0.0448869 Jy
! Component: 200  -  total flux cleaned = 0.0452651 Jy
! Total flux subtracted in 200 components = 0.0452651 Jy
! Clean residual min=-0.002023 max=0.002026 Jy/beam
! Clean residual mean=0.000000 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0452651 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0452651 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.909 mas, bmaj=1.749 mas, bpa=-1.053 degrees
! Estimated noise=0.173268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612714 Jy
! Component: 100  -  total flux cleaned = 0.00100319 Jy
! Component: 150  -  total flux cleaned = 0.00137284 Jy
! Component: 200  -  total flux cleaned = 0.00160499 Jy
! Total flux subtracted in 200 components = 0.00160499 Jy
! Clean residual min=-0.000885 max=0.000817 Jy/beam
! Clean residual mean=-0.000001 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0468701 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 48 components and 0.0468701 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.001 mas, bmaj=2.675 mas, bpa=-0.5833 degrees
! Estimated noise=0.218241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565199 Jy
! Component: 100  -  total flux cleaned = 0.000989263 Jy
! Component: 150  -  total flux cleaned = 0.00131873 Jy
! Component: 200  -  total flux cleaned = 0.00157681 Jy
! Total flux subtracted in 200 components = 0.00157681 Jy
! Clean residual min=-0.000754 max=0.000738 Jy/beam
! Clean residual mean=-0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0484469 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167543 Jy
! Component: 100  -  total flux cleaned = 0.000291553 Jy
! Component: 150  -  total flux cleaned = 0.000378543 Jy
! Component: 200  -  total flux cleaned = 0.00046059 Jy
! Total flux subtracted in 200 components = 0.00046059 Jy
! Clean residual min=-0.000736 max=0.000718 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0489075 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 92 components and 0.0489075 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.909 mas, bmaj=1.749 mas, bpa=-1.053 degrees
! Estimated noise=0.173268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.088e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101599 Jy
! Component: 150  -  total flux cleaned = 0.00022292 Jy
! Component: 200  -  total flux cleaned = 0.000287529 Jy
! Total flux subtracted in 200 components = 0.000287529 Jy
! Clean residual min=-0.000772 max=0.000726 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.049195 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.049195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058952Jy  sigma=1.371669
! Fit after  self-cal, rms=0.058954Jy  sigma=1.371592
wmodel /J0500+2651_X_map.mod
! wmodel: Unable to open new model file: /J0500+2651_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0500+2651_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.909 x 1.749 at -1.053 degrees (North through East)
! Clean map  min=-0.00078204  max=0.045482 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0500+2651_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0454823 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181178 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19504 1.19504 2.39009 4.78017 9.56034 19.1207 38.2414 76.4827
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.045 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  251.037 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0500+2651_X_dfm.log closed on Thu May 19 22:08:32 2016