! Started logfile: /scr/pima/bg219h_uvs/J0429+2724_S_dfm.log on Thu May 19 22:07:39 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J0429+2724_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0429+2724_S_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.690476 visibilities/baseline/integration-bin. ! Found source: J0429+2724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 1740 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0429+2724_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.084814Jy sigma=32.482085 ! Fit after self-cal, rms=0.598623Jy sigma=19.283336 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=6.164 mas, bpa=-12.25 degrees ! Estimated noise=0.800695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30402 Jy ! Component: 100 - total flux cleaned = 0.382849 Jy ! Total flux subtracted in 100 components = 0.382849 Jy ! Clean residual min=-0.034701 max=0.089875 Jy/beam ! Clean residual mean=0.000012 rms=0.009002 Jy/beam ! Combined flux in latest and established models = 0.382849 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.382849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142103Jy sigma=4.489362 ! Fit after self-cal, rms=0.141949Jy sigma=4.486878 ! Inverting map ! Added new window around map position (-6.5, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073078 Jy ! Component: 100 - total flux cleaned = 0.107915 Jy ! Total flux subtracted in 100 components = 0.107915 Jy ! Clean residual min=-0.017797 max=0.034144 Jy/beam ! Clean residual mean=-0.000002 rms=0.005285 Jy/beam ! Combined flux in latest and established models = 0.490765 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.490765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091680Jy sigma=2.942136 ! Fit after self-cal, rms=0.084142Jy sigma=2.734311 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315785 Jy ! Component: 100 - total flux cleaned = 0.0492372 Jy ! Total flux subtracted in 100 components = 0.0492372 Jy ! Clean residual min=-0.011875 max=0.018943 Jy/beam ! Clean residual mean=-0.000007 rms=0.003470 Jy/beam ! Combined flux in latest and established models = 0.540002 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.540002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068490Jy sigma=2.243117 ! Fit after self-cal, rms=0.066763Jy sigma=2.197762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=6.928 mas, bpa=-11.25 degrees ! Estimated noise=0.631756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021471 Jy ! Component: 100 - total flux cleaned = 0.0328472 Jy ! Component: 150 - total flux cleaned = 0.0403445 Jy ! Component: 200 - total flux cleaned = 0.0438481 Jy ! Total flux subtracted in 200 components = 0.0438481 Jy ! Clean residual min=-0.009105 max=0.015291 Jy/beam ! Clean residual mean=-0.000007 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.58385 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 68 components and 0.58385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060232Jy sigma=1.954555 ! Fit after self-cal, rms=0.059263Jy sigma=1.930775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.248 x 6.928 at -11.25 degrees (North through East) ! Clean map min=-0.0082828 max=0.38502 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 KP 0.98 ! LA 0.99 MK 1.02 NL 1.05 OV 0.98 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 1.00 ! LA 0.97 MK 0.99 NL 0.92 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Fit before self-cal, rms=0.059263Jy sigma=1.930775 ! Fit after self-cal, rms=0.058023Jy sigma=1.908203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=6.937 mas, bpa=-11.27 degrees ! Estimated noise=0.625487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125873 Jy ! Component: 100 - total flux cleaned = 0.00191786 Jy ! Component: 150 - total flux cleaned = 0.00268965 Jy ! Component: 200 - total flux cleaned = 0.00323737 Jy ! Total flux subtracted in 200 components = 0.00323737 Jy ! Clean residual min=-0.008331 max=0.011126 Jy/beam ! Clean residual mean=-0.000003 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 0.587087 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.587087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057595Jy sigma=1.860713 ! Fit after self-cal, rms=0.057459Jy sigma=1.857420 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057459Jy sigma=1.857420 ! Fit after self-cal, rms=0.056064Jy sigma=1.827078 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=6.947 mas, bpa=-11.26 degrees ! Estimated noise=0.619577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208963 Jy ! Component: 100 - total flux cleaned = -0.0017091 Jy ! Component: 150 - total flux cleaned = -0.00116907 Jy ! Component: 200 - total flux cleaned = -0.000980869 Jy ! Total flux subtracted in 200 components = -0.000980869 Jy ! Clean residual min=-0.007415 max=0.010503 Jy/beam ! Clean residual mean=-0.000010 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.586106 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.586106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055777Jy sigma=1.794982 ! Fit after self-cal, rms=0.055711Jy sigma=1.793453 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884118 Jy ! Component: 100 - total flux cleaned = 0.0111163 Jy ! Component: 150 - total flux cleaned = 0.0127475 Jy ! Component: 200 - total flux cleaned = 0.0131556 Jy ! Total flux subtracted in 200 components = 0.0131556 Jy ! Clean residual min=-0.007420 max=0.007373 Jy/beam ! Clean residual mean=-0.000010 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.599262 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.599262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054510Jy sigma=1.710494 ! Fit after self-cal, rms=0.054348Jy sigma=1.706382 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054348Jy sigma=1.706382 ! Fit after self-cal, rms=0.053802Jy sigma=1.692141 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=6.957 mas, bpa=-11.38 degrees ! Estimated noise=0.614461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386724 Jy ! Component: 100 - total flux cleaned = 0.00539242 Jy ! Component: 150 - total flux cleaned = 0.00574946 Jy ! Component: 200 - total flux cleaned = 0.00594697 Jy ! Total flux subtracted in 200 components = 0.00594697 Jy ! Clean residual min=-0.006637 max=0.007260 Jy/beam ! Clean residual mean=-0.000012 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.605209 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.605209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053369Jy sigma=1.651931 ! Fit after self-cal, rms=0.053326Jy sigma=1.650473 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175132 Jy ! Component: 100 - total flux cleaned = 0.00192838 Jy ! Component: 150 - total flux cleaned = 0.00178453 Jy ! Component: 200 - total flux cleaned = 0.0017185 Jy ! Total flux subtracted in 200 components = 0.0017185 Jy ! Clean residual min=-0.006407 max=0.007077 Jy/beam ! Clean residual mean=-0.000012 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.606927 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 126 components and 0.606927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053209Jy sigma=1.638058 ! Fit after self-cal, rms=0.053197Jy sigma=1.637671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053197Jy sigma=1.637671 ! Fit after self-cal, rms=0.052924Jy sigma=1.630351 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.006 mas, bmaj=9.929 mas, bpa=-11.97 degrees ! Estimated noise=0.781012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112141 Jy ! Component: 100 - total flux cleaned = 0.00111021 Jy ! Component: 150 - total flux cleaned = 0.00101365 Jy ! Component: 200 - total flux cleaned = 0.000938591 Jy ! Total flux subtracted in 200 components = 0.000938591 Jy ! Clean residual min=-0.008388 max=0.008687 Jy/beam ! Clean residual mean=-0.000023 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.607866 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.607866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052919Jy sigma=1.617723 ! Fit after self-cal, rms=0.052907Jy sigma=1.617488 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149593 Jy ! Component: 100 - total flux cleaned = 9.14967e-05 Jy ! Component: 150 - total flux cleaned = -2.7351e-05 Jy ! Component: 200 - total flux cleaned = -8.33957e-05 Jy ! Total flux subtracted in 200 components = -8.33957e-05 Jy ! Clean residual min=-0.008275 max=0.008641 Jy/beam ! Clean residual mean=-0.000022 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.607782 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 0.607782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052918Jy sigma=1.612510 ! Fit after self-cal, rms=0.052910Jy sigma=1.612384 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=6.963 mas, bpa=-11.47 degrees ! Estimated noise=0.610711 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 6.963 at -11.47 degrees (North through East) ! Clean map min=-0.0060546 max=0.37182 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.214 mas, bpa=-12.59 degrees ! Estimated noise=0.775144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294666 Jy ! Component: 100 - total flux cleaned = 0.400228 Jy ! Component: 150 - total flux cleaned = 0.461501 Jy ! Component: 200 - total flux cleaned = 0.500053 Jy ! Total flux subtracted in 200 components = 0.500053 Jy ! Clean residual min=-0.013616 max=0.020160 Jy/beam ! Clean residual mean=-0.000010 rms=0.003733 Jy/beam ! Combined flux in latest and established models = 0.500053 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.500053 Jy ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=6.963 mas, bpa=-11.47 degrees ! Estimated noise=0.610711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316463 Jy ! Component: 100 - total flux cleaned = 0.0528172 Jy ! Component: 150 - total flux cleaned = 0.0683146 Jy ! Component: 200 - total flux cleaned = 0.0799542 Jy ! Total flux subtracted in 200 components = 0.0799542 Jy ! Clean residual min=-0.007507 max=0.010262 Jy/beam ! Clean residual mean=-0.000015 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.580007 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 46 components and 0.580007 Jy ! Inverting map ! Added new window around map position (-31, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998667 Jy ! Component: 100 - total flux cleaned = 0.0168993 Jy ! Component: 150 - total flux cleaned = 0.0219322 Jy ! Component: 200 - total flux cleaned = 0.0249704 Jy ! Total flux subtracted in 200 components = 0.0249704 Jy ! Clean residual min=-0.007136 max=0.007480 Jy/beam ! Clean residual mean=-0.000012 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.604978 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 81 components and 0.604978 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.006 mas, bmaj=9.929 mas, bpa=-11.97 degrees ! Estimated noise=0.781012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540645 Jy ! Component: 100 - total flux cleaned = 0.00645718 Jy ! Component: 150 - total flux cleaned = 0.00689075 Jy ! Component: 200 - total flux cleaned = 0.00713997 Jy ! Total flux subtracted in 200 components = 0.00713997 Jy ! Clean residual min=-0.008111 max=0.008201 Jy/beam ! Clean residual mean=-0.000017 rms=0.002325 Jy/beam ! Combined flux in latest and established models = 0.612118 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011466 Jy ! Component: 100 - total flux cleaned = 0.0003176 Jy ! Component: 150 - total flux cleaned = 0.000413639 Jy ! Component: 200 - total flux cleaned = 0.00058078 Jy ! Total flux subtracted in 200 components = 0.00058078 Jy ! Clean residual min=-0.007880 max=0.007872 Jy/beam ! Clean residual mean=-0.000015 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 0.612698 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 130 components and 0.612698 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=6.963 mas, bpa=-11.47 degrees ! Estimated noise=0.610711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145225 Jy ! Component: 100 - total flux cleaned = 0.000660905 Jy ! Component: 150 - total flux cleaned = 0.00101595 Jy ! Component: 200 - total flux cleaned = 0.00117742 Jy ! Total flux subtracted in 200 components = 0.00117742 Jy ! Clean residual min=-0.006517 max=0.006420 Jy/beam ! Clean residual mean=-0.000008 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.613876 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 154 components and 0.613876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052648Jy sigma=1.594909 ! Fit after self-cal, rms=0.052566Jy sigma=1.592367 wmodel /J0429+2724_S_map.mod ! wmodel: Unable to open new model file: /J0429+2724_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J0429+2724_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 6.963 at -11.47 degrees (North through East) ! Clean map min=-0.0064195 max=0.37087 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0429+2724_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.370871 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00160948 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30192 1.30192 2.60383 5.20767 10.4153 20.8307 41.6613 83.3227 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0048 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.37 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 230.429 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0429+2724_S_dfm.log closed on Thu May 19 22:07:41 2016