! Started logfile: /scr/pima/bg219h_uvs/J0426+2350_X_dfm.log on Thu May 19 22:07:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0426+2350_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0426+2350_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.936015 visibilities/baseline/integration-bin.
! Found source: J0426+2350
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29316 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0426+2350_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010568Jy  sigma=25.013733
! Fit after  self-cal, rms=0.843126Jy  sigma=20.913949
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.716 mas, bmaj=1.514 mas, bpa=-3.526 degrees
! Estimated noise=0.342659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121393 Jy
! Component: 100  -  total flux cleaned = 0.147865 Jy
! Total flux subtracted in 100 components = 0.147865 Jy
! Clean residual min=-0.003163 max=0.007389 Jy/beam
! Clean residual mean=-0.000003 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.147865 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.147865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064030Jy  sigma=1.459204
! Fit after  self-cal, rms=0.064006Jy  sigma=1.458845
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00661067 Jy
! Component: 100  -  total flux cleaned = 0.00970133 Jy
! Total flux subtracted in 100 components = 0.00970133 Jy
! Clean residual min=-0.002919 max=0.004826 Jy/beam
! Clean residual mean=-0.000002 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.157566 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.157566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062972Jy  sigma=1.433896
! Fit after  self-cal, rms=0.062974Jy  sigma=1.433791
! Inverting map 
! Added new window around map position (-3.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468901 Jy
! Component: 100  -  total flux cleaned = 0.00738675 Jy
! Total flux subtracted in 100 components = 0.00738675 Jy
! Clean residual min=-0.002795 max=0.003324 Jy/beam
! Clean residual mean=-0.000002 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.164953 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.164953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062524Jy  sigma=1.420531
! Fit after  self-cal, rms=0.062501Jy  sigma=1.420065
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9289 mas, bmaj=1.823 mas, bpa=-1.382 degrees
! Estimated noise=0.174306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00433286 Jy
! Component: 100  -  total flux cleaned = 0.00694396 Jy
! Component: 150  -  total flux cleaned = 0.00891704 Jy
! Component: 200  -  total flux cleaned = 0.0101389 Jy
! Total flux subtracted in 200 components = 0.0101389 Jy
! Clean residual min=-0.001880 max=0.001895 Jy/beam
! Clean residual mean=-0.000004 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.175091 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 48 components and 0.175091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062123Jy  sigma=1.411246
! Fit after  self-cal, rms=0.062105Jy  sigma=1.410703
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9289 x 1.823 at -1.382 degrees (North through East)
! Clean map  min=-0.0018657  max=0.15803 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        1.01     
!   LA        0.99     MK        1.05     NL        1.02     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.95     KP        1.03     
!   LA        1.02     MK        1.05     NL        1.00     OV        1.04     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        0.97     KP        1.02     
!   LA        0.98     MK        1.03     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.93     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.03     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.93     KP        0.98     
!   LA        0.98     MK        1.02     NL        1.03     OV        1.02     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.93     KP        1.02     
!   LA        0.99     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.95     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.94     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.02     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.90     KP        1.01     
!   LA        1.00     MK        1.01     NL        0.99     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.90     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.91     KP        0.94     
!   LA        0.99     MK        1.07     NL        1.00     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.062105Jy  sigma=1.410703
! Fit after  self-cal, rms=0.060417Jy  sigma=1.403104
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9332 mas, bmaj=1.826 mas, bpa=-1.489 degrees
! Estimated noise=0.173244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134498 Jy
! Component: 100  -  total flux cleaned = 0.00179482 Jy
! Component: 150  -  total flux cleaned = 0.00191626 Jy
! Component: 200  -  total flux cleaned = 0.00201959 Jy
! Total flux subtracted in 200 components = 0.00201959 Jy
! Clean residual min=-0.001218 max=0.001325 Jy/beam
! Clean residual mean=-0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.177111 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 68 components and 0.177111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060383Jy  sigma=1.402191
! Fit after  self-cal, rms=0.060366Jy  sigma=1.402060
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060366Jy  sigma=1.402060
! Fit after  self-cal, rms=0.060365Jy  sigma=1.400268
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9326 mas, bmaj=1.822 mas, bpa=-1.6 degrees
! Estimated noise=0.173277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491326 Jy
! Component: 100  -  total flux cleaned = 0.000632353 Jy
! Component: 150  -  total flux cleaned = 0.000726183 Jy
! Component: 200  -  total flux cleaned = 0.000783032 Jy
! Total flux subtracted in 200 components = 0.000783032 Jy
! Clean residual min=-0.001105 max=0.001379 Jy/beam
! Clean residual mean=-0.000002 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.177894 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.177894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060356Jy  sigma=1.400055
! Fit after  self-cal, rms=0.060358Jy  sigma=1.400032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.8, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120425 Jy
! Component: 100  -  total flux cleaned = 0.00155804 Jy
! Component: 150  -  total flux cleaned = 0.00159538 Jy
! Component: 200  -  total flux cleaned = 0.0016292 Jy
! Total flux subtracted in 200 components = 0.0016292 Jy
! Clean residual min=-0.001034 max=0.001115 Jy/beam
! Clean residual mean=-0.000002 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.179523 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.179523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060333Jy  sigma=1.399324
! Fit after  self-cal, rms=0.060331Jy  sigma=1.399288
! Inverting map 
! Added new window around map position (-22, -24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000951085 Jy
! Component: 100  -  total flux cleaned = 0.00112217 Jy
! Component: 150  -  total flux cleaned = 0.00131435 Jy
! Component: 200  -  total flux cleaned = 0.00142157 Jy
! Total flux subtracted in 200 components = 0.00142157 Jy
! Clean residual min=-0.000956 max=0.001036 Jy/beam
! Clean residual mean=-0.000002 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.180945 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.180945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060314Jy  sigma=1.398814
! Fit after  self-cal, rms=0.060313Jy  sigma=1.398791
! Inverting map 
! Added new window around map position (-12.2, 43.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000844881 Jy
! Component: 100  -  total flux cleaned = 0.00109501 Jy
! Component: 150  -  total flux cleaned = 0.00125832 Jy
! Component: 200  -  total flux cleaned = 0.00139199 Jy
! Total flux subtracted in 200 components = 0.00139199 Jy
! Clean residual min=-0.000927 max=0.000908 Jy/beam
! Clean residual mean=-0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.182337 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.182337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060296Jy  sigma=1.398433
! Fit after  self-cal, rms=0.060295Jy  sigma=1.398413
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060295Jy  sigma=1.398413
! Fit after  self-cal, rms=0.060251Jy  sigma=1.398344
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=1.821 mas, bpa=-1.627 degrees
! Estimated noise=0.173126 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000223741 Jy
! Component: 100  -  total flux cleaned = 0.000366975 Jy
! Component: 150  -  total flux cleaned = 0.000497957 Jy
! Component: 200  -  total flux cleaned = 0.000583731 Jy
! Total flux subtracted in 200 components = 0.000583731 Jy
! Clean residual min=-0.000896 max=0.000889 Jy/beam
! Clean residual mean=-0.000001 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.182921 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 148 components and 0.182921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060245Jy  sigma=1.398208
! Fit after  self-cal, rms=0.060245Jy  sigma=1.398206
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109268 Jy
! Component: 100  -  total flux cleaned = 0.000177831 Jy
! Component: 150  -  total flux cleaned = 0.000232789 Jy
! Component: 200  -  total flux cleaned = 0.000295987 Jy
! Total flux subtracted in 200 components = 0.000295987 Jy
! Clean residual min=-0.000887 max=0.000880 Jy/beam
! Clean residual mean=-0.000001 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.183217 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 159 components and 0.183217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060241Jy  sigma=1.398120
! Fit after  self-cal, rms=0.060241Jy  sigma=1.398119
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060241Jy  sigma=1.398119
! Fit after  self-cal, rms=0.060237Jy  sigma=1.398114
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=2.78 mas, bpa=-5.026 degrees
! Estimated noise=0.213674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000485015 Jy
! Component: 100  -  total flux cleaned = 0.000747741 Jy
! Component: 150  -  total flux cleaned = 0.000809416 Jy
! Component: 200  -  total flux cleaned = 0.000882333 Jy
! Total flux subtracted in 200 components = 0.000882333 Jy
! Clean residual min=-0.001086 max=0.001019 Jy/beam
! Clean residual mean=-0.000002 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.184099 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 173 components and 0.184099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060237Jy  sigma=1.398094
! Fit after  self-cal, rms=0.060237Jy  sigma=1.398090
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.27119e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103585 Jy
! Component: 150  -  total flux cleaned = 0.000141008 Jy
! Component: 200  -  total flux cleaned = 0.000182302 Jy
! Total flux subtracted in 200 components = 0.000182302 Jy
! Clean residual min=-0.001063 max=0.001017 Jy/beam
! Clean residual mean=-0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.184281 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 180 components and 0.184281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060237Jy  sigma=1.398091
! Fit after  self-cal, rms=0.060238Jy  sigma=1.398089
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=1.821 mas, bpa=-1.634 degrees
! Estimated noise=0.173127 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9325 x 1.821 at -1.634 degrees (North through East)
! Clean map  min=-0.00082443  max=0.15697 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7198 mas, bmaj=1.513 mas, bpa=-3.826 degrees
! Estimated noise=0.340954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120748 Jy
! Component: 100  -  total flux cleaned = 0.147079 Jy
! Component: 150  -  total flux cleaned = 0.154283 Jy
! Component: 200  -  total flux cleaned = 0.158795 Jy
! Total flux subtracted in 200 components = 0.158795 Jy
! Clean residual min=-0.002369 max=0.002557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.158796 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.158796 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=1.821 mas, bpa=-1.634 degrees
! Estimated noise=0.173127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00539977 Jy
! Component: 100  -  total flux cleaned = 0.00888806 Jy
! Component: 150  -  total flux cleaned = 0.0114351 Jy
! Component: 200  -  total flux cleaned = 0.0134363 Jy
! Total flux subtracted in 200 components = 0.0134363 Jy
! Clean residual min=-0.001297 max=0.001350 Jy/beam
! Clean residual mean=-0.000004 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.172232 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 58 components and 0.172232 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=2.78 mas, bpa=-5.026 degrees
! Estimated noise=0.213674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276258 Jy
! Component: 100  -  total flux cleaned = 0.00450444 Jy
! Component: 150  -  total flux cleaned = 0.00579929 Jy
! Component: 200  -  total flux cleaned = 0.00684585 Jy
! Total flux subtracted in 200 components = 0.00684585 Jy
! Clean residual min=-0.001307 max=0.001242 Jy/beam
! Clean residual mean=-0.000006 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.179078 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000879872 Jy
! Component: 100  -  total flux cleaned = 0.00162346 Jy
! Component: 150  -  total flux cleaned = 0.00225555 Jy
! Component: 200  -  total flux cleaned = 0.00279607 Jy
! Total flux subtracted in 200 components = 0.00279607 Jy
! Clean residual min=-0.001145 max=0.001076 Jy/beam
! Clean residual mean=-0.000004 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.181874 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 127 components and 0.181874 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=1.821 mas, bpa=-1.634 degrees
! Estimated noise=0.173127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044961 Jy
! Component: 100  -  total flux cleaned = 0.000599819 Jy
! Component: 150  -  total flux cleaned = 0.000713487 Jy
! Component: 200  -  total flux cleaned = 0.000858537 Jy
! Total flux subtracted in 200 components = 0.000858537 Jy
! Clean residual min=-0.000942 max=0.000933 Jy/beam
! Clean residual mean=-0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.182732 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 152 components and 0.182732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060263Jy  sigma=1.398665
! Fit after  self-cal, rms=0.060262Jy  sigma=1.398621
wmodel /J0426+2350_X_map.mod
! wmodel: Unable to open new model file: /J0426+2350_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0426+2350_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9325 x 1.821 at -1.634 degrees (North through East)
! Clean map  min=-0.00087886  max=0.15706 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0426+2350_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.157056 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225497 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.430732 0.430732 0.861463 1.72293 3.44585 6.89171 13.7834 27.5668 55.1337
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  696.489 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0426+2350_X_dfm.log closed on Thu May 19 22:07:38 2016