! Started logfile: /scr/pima/bg219h_uvs/J0350-3232_X_dfm.log on Thu May 19 22:07:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0350-3232_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0350-3232_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.723077 visibilities/baseline/integration-bin.
! Found source: J0350-3232
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20304 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0350-3232_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.035454Jy  sigma=19.711722
! Fit after  self-cal, rms=0.746796Jy  sigma=14.086754
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6652 mas, bmaj=1.997 mas, bpa=-7.013 degrees
! Estimated noise=0.529051 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196887 Jy
! Component: 100  -  total flux cleaned = 0.241744 Jy
! Total flux subtracted in 100 components = 0.241744 Jy
! Clean residual min=-0.010290 max=0.025672 Jy/beam
! Clean residual mean=-0.000029 rms=0.002428 Jy/beam
! Combined flux in latest and established models = 0.241744 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.241744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098796Jy  sigma=1.700201
! Fit after  self-cal, rms=0.098730Jy  sigma=1.699450
! Inverting map 
! Added new window around map position (1, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244879 Jy
! Component: 100  -  total flux cleaned = 0.0381274 Jy
! Total flux subtracted in 100 components = 0.0381274 Jy
! Clean residual min=-0.007128 max=0.009835 Jy/beam
! Clean residual mean=-0.000012 rms=0.001456 Jy/beam
! Combined flux in latest and established models = 0.279871 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.279871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090338Jy  sigma=1.506041
! Fit after  self-cal, rms=0.090043Jy  sigma=1.500924
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00985593 Jy
! Component: 100  -  total flux cleaned = 0.0163666 Jy
! Total flux subtracted in 100 components = 0.0163666 Jy
! Clean residual min=-0.006148 max=0.006911 Jy/beam
! Clean residual mean=-0.000004 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.296238 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.296238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088172Jy  sigma=1.457507
! Fit after  self-cal, rms=0.088119Jy  sigma=1.456272
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.863 mas, bmaj=2.56 mas, bpa=-3.963 degrees
! Estimated noise=0.281311 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00934488 Jy
! Component: 100  -  total flux cleaned = 0.0145791 Jy
! Component: 150  -  total flux cleaned = 0.0176198 Jy
! Component: 200  -  total flux cleaned = 0.0181713 Jy
! Total flux subtracted in 200 components = 0.0181713 Jy
! Clean residual min=-0.003579 max=0.004922 Jy/beam
! Clean residual mean=-0.000002 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.314409 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 0.314409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087090Jy  sigma=1.434781
! Fit after  self-cal, rms=0.087026Jy  sigma=1.432825
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.863 x 2.56 at -3.963 degrees (North through East)
! Clean map  min=-0.0030038  max=0.2491 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.08     KP        0.97     
!   LA        1.02     MK        0.99     NL        1.01     OV        1.01     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.03     KP        0.97     
!   LA        1.01     MK        1.01     NL        1.02     OV        1.01     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.06     KP        0.97     
!   LA        1.01     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.06     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.01     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.07     KP        0.96     
!   LA        1.02     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.05     KP        0.97     
!   LA        1.02     MK        1.05     NL        1.00     OV        1.01     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.07     KP        0.97     
!   LA        0.99     MK        0.98     NL        0.98     OV        0.98     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.09     KP        0.95     
!   LA        1.02     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.07     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.01     OV        1.01     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        0.97     
!   LA        1.02     MK        0.97     NL        0.97     OV        0.98     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        0.96     
!   LA        1.02     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.86     
!   LA        1.00     MK        1.03     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.087026Jy  sigma=1.432825
! Fit after  self-cal, rms=0.087743Jy  sigma=1.422499
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8617 mas, bmaj=2.555 mas, bpa=-3.717 degrees
! Estimated noise=0.280251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030878 Jy
! Component: 100  -  total flux cleaned = 0.00378597 Jy
! Component: 150  -  total flux cleaned = 0.00414126 Jy
! Component: 200  -  total flux cleaned = 0.00438935 Jy
! Total flux subtracted in 200 components = 0.00438935 Jy
! Clean residual min=-0.002076 max=0.002295 Jy/beam
! Clean residual mean=-0.000003 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.318798 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 58 components and 0.318798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087596Jy  sigma=1.419449
! Fit after  self-cal, rms=0.087609Jy  sigma=1.419194
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087609Jy  sigma=1.419194
! Fit after  self-cal, rms=0.087726Jy  sigma=1.417475
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8616 mas, bmaj=2.553 mas, bpa=-3.721 degrees
! Estimated noise=0.28007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000601168 Jy
! Component: 100  -  total flux cleaned = 0.0008479 Jy
! Component: 150  -  total flux cleaned = 0.000917632 Jy
! Component: 200  -  total flux cleaned = 0.000949372 Jy
! Total flux subtracted in 200 components = 0.000949372 Jy
! Clean residual min=-0.001875 max=0.002082 Jy/beam
! Clean residual mean=-0.000003 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.319748 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 68 components and 0.319748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087690Jy  sigma=1.416845
! Fit after  self-cal, rms=0.087691Jy  sigma=1.416800
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (37.6, -8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190128 Jy
! Component: 100  -  total flux cleaned = 0.00205166 Jy
! Component: 150  -  total flux cleaned = 0.00230163 Jy
! Component: 200  -  total flux cleaned = 0.00249759 Jy
! Total flux subtracted in 200 components = 0.00249759 Jy
! Clean residual min=-0.001715 max=0.001858 Jy/beam
! Clean residual mean=-0.000002 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.322246 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 90 components and 0.322246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087636Jy  sigma=1.415969
! Fit after  self-cal, rms=0.087635Jy  sigma=1.415923
! Inverting map 
! Added new window around map position (42, 26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152037 Jy
! Component: 100  -  total flux cleaned = 0.0019146 Jy
! Component: 150  -  total flux cleaned = 0.0023105 Jy
! Component: 200  -  total flux cleaned = 0.00261629 Jy
! Total flux subtracted in 200 components = 0.00261629 Jy
! Clean residual min=-0.001621 max=0.001545 Jy/beam
! Clean residual mean=-0.000002 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.324862 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 109 components and 0.324862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087597Jy  sigma=1.415126
! Fit after  self-cal, rms=0.087594Jy  sigma=1.415080
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087594Jy  sigma=1.415080
! Fit after  self-cal, rms=0.087781Jy  sigma=1.412361
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8621 mas, bmaj=2.553 mas, bpa=-3.718 degrees
! Estimated noise=0.279678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322487 Jy
! Component: 100  -  total flux cleaned = 0.000583289 Jy
! Component: 150  -  total flux cleaned = 0.000814766 Jy
! Component: 200  -  total flux cleaned = 0.000838497 Jy
! Total flux subtracted in 200 components = 0.000838497 Jy
! Clean residual min=-0.001529 max=0.001465 Jy/beam
! Clean residual mean=-0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.3257 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 124 components and 0.3257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087763Jy  sigma=1.412070
! Fit after  self-cal, rms=0.087766Jy  sigma=1.412050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169331 Jy
! Component: 100  -  total flux cleaned = 0.000191516 Jy
! Component: 150  -  total flux cleaned = 0.000232438 Jy
! Component: 200  -  total flux cleaned = 0.000251701 Jy
! Total flux subtracted in 200 components = 0.000251701 Jy
! Clean residual min=-0.001530 max=0.001437 Jy/beam
! Clean residual mean=-0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.325952 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 129 components and 0.325952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087755Jy  sigma=1.411883
! Fit after  self-cal, rms=0.087754Jy  sigma=1.411881
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087754Jy  sigma=1.411881
! Fit after  self-cal, rms=0.087749Jy  sigma=1.411845
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.145 mas, bmaj=6.524 mas, bpa=-5.807 degrees
! Estimated noise=0.347482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.9913e-05 Jy
! Component: 100  -  total flux cleaned = 0.000245693 Jy
! Component: 150  -  total flux cleaned = 0.000367432 Jy
! Component: 200  -  total flux cleaned = 0.000366381 Jy
! Total flux subtracted in 200 components = 0.000366381 Jy
! Clean residual min=-0.001595 max=0.001503 Jy/beam
! Clean residual mean=-0.000003 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.326318 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 143 components and 0.326318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087747Jy  sigma=1.411763
! Fit after  self-cal, rms=0.087747Jy  sigma=1.411751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.07256e-05 Jy
! Component: 100  -  total flux cleaned = 4.55428e-05 Jy
! Component: 150  -  total flux cleaned = 4.58052e-05 Jy
! Component: 200  -  total flux cleaned = 4.52594e-05 Jy
! Total flux subtracted in 200 components = 4.52594e-05 Jy
! Clean residual min=-0.001577 max=0.001489 Jy/beam
! Clean residual mean=-0.000003 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.326364 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 149 components and 0.326364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087746Jy  sigma=1.411721
! Fit after  self-cal, rms=0.087745Jy  sigma=1.411714
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8619 mas, bmaj=2.552 mas, bpa=-3.724 degrees
! Estimated noise=0.279385 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8619 x 2.552 at -3.724 degrees (North through East)
! Clean map  min=-0.0025963  max=0.24813 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.665 mas, bmaj=1.989 mas, bpa=-6.765 degrees
! Estimated noise=0.526801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195892 Jy
! Component: 100  -  total flux cleaned = 0.243543 Jy
! Component: 150  -  total flux cleaned = 0.265983 Jy
! Component: 200  -  total flux cleaned = 0.278479 Jy
! Total flux subtracted in 200 components = 0.278479 Jy
! Clean residual min=-0.004840 max=0.006724 Jy/beam
! Clean residual mean=-0.000012 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.278479 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.278479 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8619 mas, bmaj=2.552 mas, bpa=-3.724 degrees
! Estimated noise=0.279385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146876 Jy
! Component: 100  -  total flux cleaned = 0.02313 Jy
! Component: 150  -  total flux cleaned = 0.0283484 Jy
! Component: 200  -  total flux cleaned = 0.0318692 Jy
! Total flux subtracted in 200 components = 0.0318692 Jy
! Clean residual min=-0.002350 max=0.002633 Jy/beam
! Clean residual mean=-0.000006 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.310348 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 53 components and 0.310348 Jy
! Inverting map 
! Added new window around map position (2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282471 Jy
! Component: 100  -  total flux cleaned = 0.00500758 Jy
! Component: 150  -  total flux cleaned = 0.00686998 Jy
! Component: 200  -  total flux cleaned = 0.00848618 Jy
! Total flux subtracted in 200 components = 0.00848618 Jy
! Clean residual min=-0.001830 max=0.001838 Jy/beam
! Clean residual mean=-0.000003 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.318834 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 84 components and 0.318834 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.145 mas, bmaj=6.524 mas, bpa=-5.807 degrees
! Estimated noise=0.347482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018876 Jy
! Component: 100  -  total flux cleaned = 0.00325217 Jy
! Component: 150  -  total flux cleaned = 0.00436088 Jy
! Component: 200  -  total flux cleaned = 0.00525032 Jy
! Total flux subtracted in 200 components = 0.00525032 Jy
! Clean residual min=-0.001610 max=0.001627 Jy/beam
! Clean residual mean=-0.000004 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.324084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355011 Jy
! Component: 100  -  total flux cleaned = 0.00070317 Jy
! Component: 150  -  total flux cleaned = 0.000967165 Jy
! Component: 200  -  total flux cleaned = 0.00123177 Jy
! Total flux subtracted in 200 components = 0.00123177 Jy
! Clean residual min=-0.001551 max=0.001565 Jy/beam
! Clean residual mean=-0.000004 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.325316 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 135 components and 0.325316 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8619 mas, bmaj=2.552 mas, bpa=-3.724 degrees
! Estimated noise=0.279385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.84132e-05 Jy
! Component: 100  -  total flux cleaned = 0.000207057 Jy
! Component: 150  -  total flux cleaned = 0.000344442 Jy
! Component: 200  -  total flux cleaned = 0.000532566 Jy
! Total flux subtracted in 200 components = 0.000532566 Jy
! Clean residual min=-0.001471 max=0.001458 Jy/beam
! Clean residual mean=-0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.325849 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 157 components and 0.325849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087774Jy  sigma=1.412247
! Fit after  self-cal, rms=0.087761Jy  sigma=1.412133
wmodel /J0350-3232_X_map.mod
! wmodel: Unable to open new model file: /J0350-3232_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0350-3232_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8619 x 2.552 at -3.724 degrees (North through East)
! Clean map  min=-0.001336  max=0.25085 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0350-3232_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.250848 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0003676 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.43963 0.43963 0.879259 1.75852 3.51704 7.03407 14.0681 28.1363 56.2726
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.25 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  682.392 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0350-3232_X_dfm.log closed on Thu May 19 22:07:06 2016