! Started logfile: /scr/pima/bg219h_uvs/J0350-3232_S_uvs.log on Thu Apr  7 08:52:21 2016
obs /scr/pima/bg219h_uvs/J0350-3232_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0350-3232_S_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.671368 visibilities/baseline/integration-bin.
! Found source: J0350-3232
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6284 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0350-3232_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026770Jy  sigma=17.095553
! Fit after  self-cal, rms=0.835033Jy  sigma=13.833330
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.593 mas, bmaj=8.043 mas, bpa=-1.593 degrees
! Estimated noise=1.00471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126992 Jy
! Component: 100  -  total flux cleaned = 0.166241 Jy
! Total flux subtracted in 100 components = 0.166241 Jy
! Clean residual min=-0.007937 max=0.014632 Jy/beam
! Clean residual mean=-0.000025 rms=0.002343 Jy/beam
! Combined flux in latest and established models = 0.166241 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.166241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090241Jy  sigma=1.437039
! Fit after  self-cal, rms=0.090054Jy  sigma=1.434215
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152343 Jy
! Component: 100  -  total flux cleaned = 0.0239875 Jy
! Total flux subtracted in 100 components = 0.0239875 Jy
! Clean residual min=-0.006747 max=0.008750 Jy/beam
! Clean residual mean=-0.000011 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 0.190228 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.190228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086657Jy  sigma=1.367494
! Fit after  self-cal, rms=0.086649Jy  sigma=1.367187
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=10.14 mas, bpa=-0.3815 degrees
! Estimated noise=0.648917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117237 Jy
! Component: 100  -  total flux cleaned = 0.0178237 Jy
! Component: 150  -  total flux cleaned = 0.0216925 Jy
! Component: 200  -  total flux cleaned = 0.0244154 Jy
! Total flux subtracted in 200 components = 0.0244154 Jy
! Clean residual min=-0.004514 max=0.005371 Jy/beam
! Clean residual mean=-0.000012 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.214644 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 52 components and 0.214644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085043Jy  sigma=1.339675
! Fit after  self-cal, rms=0.084952Jy  sigma=1.337558
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.175 x 10.14 at -0.3815 degrees (North through East)
! Clean map  min=-0.0041606  max=0.15972 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.04     KP        0.98     
!   LA        1.01     MK        1.09     NL        1.18     OV        0.98     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00*    HN        1.14     KP        0.98     
!   LA        1.00     MK        0.93     NL        1.11     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.04     KP        0.94     
!   LA        0.99     MK        0.94     NL        0.88     OV        0.96     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.04     KP        1.00     
!   LA        0.98     MK        1.20     NL        0.92     OV        1.04     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.084952Jy  sigma=1.337558
! Fit after  self-cal, rms=0.085372Jy  sigma=1.318791
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.187 mas, bmaj=10.2 mas, bpa=-0.08976 degrees
! Estimated noise=0.649732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000942186 Jy
! Component: 100  -  total flux cleaned = -0.00101171 Jy
! Component: 150  -  total flux cleaned = -0.00101012 Jy
! Component: 200  -  total flux cleaned = -0.0010099 Jy
! Total flux subtracted in 200 components = -0.0010099 Jy
! Clean residual min=-0.003830 max=0.003245 Jy/beam
! Clean residual mean=-0.000001 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.213634 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.213634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085255Jy  sigma=1.317554
! Fit after  self-cal, rms=0.085319Jy  sigma=1.317212
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085319Jy  sigma=1.317212
! Fit after  self-cal, rms=0.085545Jy  sigma=1.315075
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=10.22 mas, bpa=-0.0159 degrees
! Estimated noise=0.650999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00051949 Jy
! Component: 100  -  total flux cleaned = -0.000566193 Jy
! Component: 150  -  total flux cleaned = -0.000607981 Jy
! Component: 200  -  total flux cleaned = -0.000647345 Jy
! Total flux subtracted in 200 components = -0.000647345 Jy
! Clean residual min=-0.003738 max=0.003225 Jy/beam
! Clean residual mean=-0.000001 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.212986 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.212986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085485Jy  sigma=1.314460
! Fit after  self-cal, rms=0.085490Jy  sigma=1.314426
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.89105e-05 Jy
! Component: 100  -  total flux cleaned = 1.2679e-05 Jy
! Component: 150  -  total flux cleaned = -2.21902e-05 Jy
! Component: 200  -  total flux cleaned = -8.55252e-05 Jy
! Total flux subtracted in 200 components = -8.55252e-05 Jy
! Clean residual min=-0.003683 max=0.003250 Jy/beam
! Clean residual mean=-0.000001 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.212901 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.212901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085456Jy  sigma=1.314097
! Fit after  self-cal, rms=0.085457Jy  sigma=1.314080
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085457Jy  sigma=1.314080
! Fit after  self-cal, rms=0.085398Jy  sigma=1.309847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.201 mas, bmaj=10.26 mas, bpa=0.02749 degrees
! Estimated noise=0.65068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000395379 Jy
! Component: 100  -  total flux cleaned = -0.000425138 Jy
! Component: 150  -  total flux cleaned = -0.000475718 Jy
! Component: 200  -  total flux cleaned = -0.000499306 Jy
! Total flux subtracted in 200 components = -0.000499306 Jy
! Clean residual min=-0.003472 max=0.003423 Jy/beam
! Clean residual mean=-0.000003 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.212402 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.212402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085378Jy  sigma=1.309656
! Fit after  self-cal, rms=0.085382Jy  sigma=1.309598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126486 Jy
! Component: 100  -  total flux cleaned = -0.000127118 Jy
! Component: 150  -  total flux cleaned = -0.000147736 Jy
! Component: 200  -  total flux cleaned = -0.000148139 Jy
! Total flux subtracted in 200 components = -0.000148139 Jy
! Clean residual min=-0.003483 max=0.003419 Jy/beam
! Clean residual mean=-0.000004 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.212253 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.212253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085369Jy  sigma=1.309481
! Fit after  self-cal, rms=0.085370Jy  sigma=1.309473
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085370Jy  sigma=1.309473
! Fit after  self-cal, rms=0.085402Jy  sigma=1.309441
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.093 mas, bmaj=21.23 mas, bpa=-3.45 degrees
! Estimated noise=0.799804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.76018e-05 Jy
! Component: 100  -  total flux cleaned = 2.27005e-06 Jy
! Component: 150  -  total flux cleaned = 1.93416e-05 Jy
! Component: 200  -  total flux cleaned = 4.77563e-06 Jy
! Total flux subtracted in 200 components = 4.77563e-06 Jy
! Clean residual min=-0.003257 max=0.002588 Jy/beam
! Clean residual mean=-0.000006 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.212258 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 108 components and 0.212258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085399Jy  sigma=1.309471
! Fit after  self-cal, rms=0.085397Jy  sigma=1.309442
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152727 Jy
! Component: 100  -  total flux cleaned = 0.000181322 Jy
! Component: 150  -  total flux cleaned = 0.000168341 Jy
! Component: 200  -  total flux cleaned = 0.000168523 Jy
! Total flux subtracted in 200 components = 0.000168523 Jy
! Clean residual min=-0.003233 max=0.002593 Jy/beam
! Clean residual mean=-0.000006 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.212427 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 116 components and 0.212427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085397Jy  sigma=1.309463
! Fit after  self-cal, rms=0.085397Jy  sigma=1.309446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=10.3 mas, bpa=0.09604 degrees
! Estimated noise=0.65079 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.207 x 10.3 at 0.09604 degrees (North through East)
! Clean map  min=-0.0033607  max=0.16084 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.626 mas, bmaj=8.19 mas, bpa=-0.6625 degrees
! Estimated noise=1.01902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1278 Jy
! Component: 100  -  total flux cleaned = 0.166489 Jy
! Component: 150  -  total flux cleaned = 0.182283 Jy
! Component: 200  -  total flux cleaned = 0.191909 Jy
! Total flux subtracted in 200 components = 0.191909 Jy
! Clean residual min=-0.005986 max=0.005880 Jy/beam
! Clean residual mean=-0.000009 rms=0.001486 Jy/beam
! Combined flux in latest and established models = 0.191909 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.191909 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=10.3 mas, bpa=0.09604 degrees
! Estimated noise=0.65079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00851815 Jy
! Component: 100  -  total flux cleaned = 0.0132227 Jy
! Component: 150  -  total flux cleaned = 0.0160738 Jy
! Component: 200  -  total flux cleaned = 0.0169575 Jy
! Total flux subtracted in 200 components = 0.0169575 Jy
! Clean residual min=-0.003773 max=0.003216 Jy/beam
! Clean residual mean=-0.000008 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.208867 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.208867 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.093 mas, bmaj=21.23 mas, bpa=-3.45 degrees
! Estimated noise=0.799804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204586 Jy
! Component: 100  -  total flux cleaned = 0.00307045 Jy
! Component: 150  -  total flux cleaned = 0.00321973 Jy
! Component: 200  -  total flux cleaned = 0.00329665 Jy
! Total flux subtracted in 200 components = 0.00329665 Jy
! Clean residual min=-0.003429 max=0.002717 Jy/beam
! Clean residual mean=-0.000006 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.212163 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.24607e-05 Jy
! Component: 100  -  total flux cleaned = 6.53668e-05 Jy
! Component: 150  -  total flux cleaned = 6.50718e-05 Jy
! Component: 200  -  total flux cleaned = 8.32816e-05 Jy
! Total flux subtracted in 200 components = 8.32816e-05 Jy
! Clean residual min=-0.003408 max=0.002701 Jy/beam
! Clean residual mean=-0.000006 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.212247 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 76 components and 0.212247 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=10.3 mas, bpa=0.09604 degrees
! Estimated noise=0.65079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000286514 Jy
! Component: 100  -  total flux cleaned = -0.000514191 Jy
! Component: 150  -  total flux cleaned = -0.000549638 Jy
! Component: 200  -  total flux cleaned = -0.00061954 Jy
! Total flux subtracted in 200 components = -0.00061954 Jy
! Clean residual min=-0.003571 max=0.003283 Jy/beam
! Clean residual mean=-0.000003 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.211627 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 91 components and 0.211627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085439Jy  sigma=1.309947
! Fit after  self-cal, rms=0.085432Jy  sigma=1.309824
wmodel /scr/pima/bg219h_uvs/J0350-3232_S_map.mod
! Writing 91 model components to file: /scr/pima/bg219h_uvs/J0350-3232_S_map.mod
wobs /scr/pima/bg219h_uvs/J0350-3232_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0350-3232_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J0350-3232_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219h_uvs/J0350-3232_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000221574 Jy
! Component: 100  -  total flux cleaned = -0.000265646 Jy
! Component: 150  -  total flux cleaned = -0.000459466 Jy
! Component: 200  -  total flux cleaned = -0.00041372 Jy
! Component: 250  -  total flux cleaned = -0.000544063 Jy
! Component: 300  -  total flux cleaned = -0.000458992 Jy
! Component: 350  -  total flux cleaned = -0.000580318 Jy
! Component: 400  -  total flux cleaned = -0.000697538 Jy
! Component: 450  -  total flux cleaned = -0.000697071 Jy
! Component: 500  -  total flux cleaned = -0.000918795 Jy
! Component: 550  -  total flux cleaned = -0.000954726 Jy
! Component: 600  -  total flux cleaned = -0.00109584 Jy
! Component: 650  -  total flux cleaned = -0.00126719 Jy
! Component: 700  -  total flux cleaned = -0.00136832 Jy
! Component: 750  -  total flux cleaned = -0.001501 Jy
! Component: 800  -  total flux cleaned = -0.00156586 Jy
! Component: 850  -  total flux cleaned = -0.00178928 Jy
! Component: 900  -  total flux cleaned = -0.00191446 Jy
! Component: 950  -  total flux cleaned = -0.0021299 Jy
! Component: 1000  -  total flux cleaned = -0.00234153 Jy
! Component: 1050  -  total flux cleaned = -0.00257944 Jy
! Component: 1100  -  total flux cleaned = -0.00278382 Jy
! Component: 1150  -  total flux cleaned = -0.00292776 Jy
! Component: 1200  -  total flux cleaned = -0.00298442 Jy
! Component: 1250  -  total flux cleaned = -0.00318038 Jy
! Component: 1300  -  total flux cleaned = -0.00323487 Jy
! Component: 1350  -  total flux cleaned = -0.00328957 Jy
! Component: 1400  -  total flux cleaned = -0.00334367 Jy
! Component: 1450  -  total flux cleaned = -0.00339664 Jy
! Component: 1500  -  total flux cleaned = -0.00337013 Jy
! Component: 1550  -  total flux cleaned = -0.00336971 Jy
! Component: 1600  -  total flux cleaned = -0.00336986 Jy
! Component: 1650  -  total flux cleaned = -0.00339496 Jy
! Component: 1700  -  total flux cleaned = -0.00344407 Jy
! Component: 1750  -  total flux cleaned = -0.00337051 Jy
! Component: 1800  -  total flux cleaned = -0.00337057 Jy
! Component: 1850  -  total flux cleaned = -0.00337032 Jy
! Component: 1900  -  total flux cleaned = -0.00327517 Jy
! Component: 1950  -  total flux cleaned = -0.00327551 Jy
! Component: 2000  -  total flux cleaned = -0.00318231 Jy
! Component: 2050  -  total flux cleaned = -0.00318217 Jy
! Component: 2100  -  total flux cleaned = -0.00313676 Jy
! Component: 2150  -  total flux cleaned = -0.00309147 Jy
! Component: 2200  -  total flux cleaned = -0.00306934 Jy
! Component: 2250  -  total flux cleaned = -0.00313588 Jy
! Component: 2300  -  total flux cleaned = -0.00300393 Jy
! Component: 2350  -  total flux cleaned = -0.00293869 Jy
! Component: 2400  -  total flux cleaned = -0.00300323 Jy
! Component: 2450  -  total flux cleaned = -0.0029174 Jy
! Component: 2500  -  total flux cleaned = -0.00296027 Jy
! Component: 2550  -  total flux cleaned = -0.00298148 Jy
! Component: 2600  -  total flux cleaned = -0.00285618 Jy
! Component: 2650  -  total flux cleaned = -0.00275259 Jy
! Component: 2700  -  total flux cleaned = -0.00271153 Jy
! Component: 2750  -  total flux cleaned = -0.00256877 Jy
! Component: 2800  -  total flux cleaned = -0.00248783 Jy
! Component: 2850  -  total flux cleaned = -0.00244798 Jy
! Component: 2900  -  total flux cleaned = -0.0024082 Jy
! Component: 2950  -  total flux cleaned = -0.00232904 Jy
! Component: 3000  -  total flux cleaned = -0.00225047 Jy
! Component: 3050  -  total flux cleaned = -0.00217271 Jy
! Component: 3100  -  total flux cleaned = -0.0021918 Jy
! Component: 3150  -  total flux cleaned = -0.00207692 Jy
! Component: 3200  -  total flux cleaned = -0.0020198 Jy
! Component: 3250  -  total flux cleaned = -0.00203881 Jy
! Component: 3300  -  total flux cleaned = -0.00196375 Jy
! Component: 3350  -  total flux cleaned = -0.0019823 Jy
! Component: 3400  -  total flux cleaned = -0.00190848 Jy
! Component: 3450  -  total flux cleaned = -0.00188998 Jy
! Component: 3500  -  total flux cleaned = -0.00181701 Jy
! Component: 3550  -  total flux cleaned = -0.00183519 Jy
! Component: 3600  -  total flux cleaned = -0.0017455 Jy
! Component: 3650  -  total flux cleaned = -0.00170977 Jy
! Component: 3700  -  total flux cleaned = -0.00171008 Jy
! Component: 3750  -  total flux cleaned = -0.00171016 Jy
! Component: 3800  -  total flux cleaned = -0.00160537 Jy
! Component: 3850  -  total flux cleaned = -0.00158812 Jy
! Component: 3900  -  total flux cleaned = -0.00160557 Jy
! Component: 3950  -  total flux cleaned = -0.00157152 Jy
! Component: 4000  -  total flux cleaned = -0.00155454 Jy
! Component: 4050  -  total flux cleaned = -0.00152083 Jy
! Total flux subtracted in 4096 components = -0.00155442 Jy
! Clean residual min=-0.001052 max=0.000946 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.210073 Jy
keep
! Adding 253 model components to the UV plane model.
! The established model now contains 344 components and 0.210073 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0350-3232_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.207 x 10.3 at 0.09604 degrees (North through East)
! Clean map  min=-0.0019805  max=0.16213 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0350-3232_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.162132 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000306787 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.567661 0.567661 1.13532 2.27064 4.54129 9.08257 18.1651 36.3303 72.6606
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.162 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  528.484 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0350-3232_S_uvs.log closed on Thu Apr  7 08:52:25 2016