! Started logfile: /scr/pima/bg219h_uvs/J0327+0044_X_dfm.log on Thu May 19 22:06:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0327+0044_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0327+0044_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.772222 visibilities/baseline/integration-bin.
! Found source: J0327+0044
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0327+0044_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.037147Jy  sigma=23.329611
! Fit after  self-cal, rms=0.727263Jy  sigma=16.329044
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7195 mas, bmaj=1.699 mas, bpa=-3.941 degrees
! Estimated noise=0.38839 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196871 Jy
! Component: 100  -  total flux cleaned = 0.264955 Jy
! Total flux subtracted in 100 components = 0.264955 Jy
! Clean residual min=-0.014009 max=0.029738 Jy/beam
! Clean residual mean=0.000008 rms=0.002755 Jy/beam
! Combined flux in latest and established models = 0.264955 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.264955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092606Jy  sigma=1.963762
! Fit after  self-cal, rms=0.092371Jy  sigma=1.957137
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343941 Jy
! Component: 100  -  total flux cleaned = 0.053348 Jy
! Total flux subtracted in 100 components = 0.053348 Jy
! Clean residual min=-0.006492 max=0.009734 Jy/beam
! Clean residual mean=0.000003 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.318303 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.318303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074566Jy  sigma=1.535210
! Fit after  self-cal, rms=0.074459Jy  sigma=1.531614
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110147 Jy
! Component: 100  -  total flux cleaned = 0.0170817 Jy
! Total flux subtracted in 100 components = 0.0170817 Jy
! Clean residual min=-0.005186 max=0.008468 Jy/beam
! Clean residual mean=0.000001 rms=0.000985 Jy/beam
! Combined flux in latest and established models = 0.335384 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 10 components and 0.335384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072255Jy  sigma=1.484713
! Fit after  self-cal, rms=0.072251Jy  sigma=1.484351
! Inverting map 
! Added new window around map position (1.6, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715294 Jy
! Component: 100  -  total flux cleaned = 0.0101262 Jy
! Total flux subtracted in 100 components = 0.0101262 Jy
! Clean residual min=-0.004202 max=0.004508 Jy/beam
! Clean residual mean=0.000000 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.345511 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.345511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071403Jy  sigma=1.464658
! Fit after  self-cal, rms=0.071332Jy  sigma=1.462948
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9009 mas, bmaj=1.995 mas, bpa=-2.311 degrees
! Estimated noise=0.229502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529085 Jy
! Component: 100  -  total flux cleaned = 0.00686466 Jy
! Component: 150  -  total flux cleaned = 0.00789777 Jy
! Component: 200  -  total flux cleaned = 0.00815297 Jy
! Total flux subtracted in 200 components = 0.00815297 Jy
! Clean residual min=-0.003463 max=0.003137 Jy/beam
! Clean residual mean=-0.000002 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.353664 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.353664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070768Jy  sigma=1.450836
! Fit after  self-cal, rms=0.070719Jy  sigma=1.449651
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9009 x 1.995 at -2.311 degrees (North through East)
! Clean map  min=-0.0031017  max=0.27282 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.95     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.94     KP        0.99     
!   LA        1.01     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.93     KP        1.00     
!   LA        1.01     MK        0.99     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.92     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.95     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.94     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.01     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.92     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.95     KP        1.02     
!   LA        1.01     MK        0.98     NL        1.00     OV        1.02     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.94     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.91     KP        0.91     
!   LA        1.02     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.070719Jy  sigma=1.449651
! Fit after  self-cal, rms=0.068345Jy  sigma=1.435693
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8994 mas, bmaj=1.993 mas, bpa=-2.378 degrees
! Estimated noise=0.227875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206229 Jy
! Component: 100  -  total flux cleaned = 0.00217166 Jy
! Component: 150  -  total flux cleaned = 0.00226279 Jy
! Component: 200  -  total flux cleaned = 0.00225931 Jy
! Total flux subtracted in 200 components = 0.00225931 Jy
! Clean residual min=-0.001904 max=0.002163 Jy/beam
! Clean residual mean=-0.000001 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.355923 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 0.355923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068231Jy  sigma=1.433423
! Fit after  self-cal, rms=0.068196Jy  sigma=1.433106
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068196Jy  sigma=1.433106
! Fit after  self-cal, rms=0.068057Jy  sigma=1.430343
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8993 mas, bmaj=1.993 mas, bpa=-2.403 degrees
! Estimated noise=0.227661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000930332 Jy
! Component: 100  -  total flux cleaned = 0.00104507 Jy
! Component: 150  -  total flux cleaned = 0.00117838 Jy
! Component: 200  -  total flux cleaned = 0.00123854 Jy
! Total flux subtracted in 200 components = 0.00123854 Jy
! Clean residual min=-0.001616 max=0.001970 Jy/beam
! Clean residual mean=-0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.357161 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.357161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068011Jy  sigma=1.429500
! Fit after  self-cal, rms=0.068010Jy  sigma=1.429412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018687 Jy
! Component: 100  -  total flux cleaned = 0.00272369 Jy
! Component: 150  -  total flux cleaned = 0.00312586 Jy
! Component: 200  -  total flux cleaned = 0.00347802 Jy
! Total flux subtracted in 200 components = 0.00347802 Jy
! Clean residual min=-0.001366 max=0.001500 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.360639 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 0.360639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067943Jy  sigma=1.427993
! Fit after  self-cal, rms=0.067940Jy  sigma=1.427937
! Inverting map 
! Added new window around map position (0.4, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000746 Jy
! Component: 100  -  total flux cleaned = 0.000975892 Jy
! Component: 150  -  total flux cleaned = 0.00100619 Jy
! Component: 200  -  total flux cleaned = 0.00109241 Jy
! Total flux subtracted in 200 components = 0.00109241 Jy
! Clean residual min=-0.001366 max=0.001337 Jy/beam
! Clean residual mean=-0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.361732 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 90 components and 0.361732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067893Jy  sigma=1.427045
! Fit after  self-cal, rms=0.067893Jy  sigma=1.426999
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067893Jy  sigma=1.426999
! Fit after  self-cal, rms=0.067774Jy  sigma=1.426868
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8995 mas, bmaj=1.993 mas, bpa=-2.417 degrees
! Estimated noise=0.227361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.70092e-05 Jy
! Component: 100  -  total flux cleaned = 0.000411817 Jy
! Component: 150  -  total flux cleaned = 0.000541322 Jy
! Component: 200  -  total flux cleaned = 0.00068585 Jy
! Total flux subtracted in 200 components = 0.00068585 Jy
! Clean residual min=-0.001224 max=0.001301 Jy/beam
! Clean residual mean=-0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.362418 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 0.362418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067753Jy  sigma=1.426444
! Fit after  self-cal, rms=0.067753Jy  sigma=1.426436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142154 Jy
! Component: 100  -  total flux cleaned = 0.000252189 Jy
! Component: 150  -  total flux cleaned = 0.000334803 Jy
! Component: 200  -  total flux cleaned = 0.000393112 Jy
! Total flux subtracted in 200 components = 0.000393112 Jy
! Clean residual min=-0.001212 max=0.001272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.362811 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 112 components and 0.362811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067741Jy  sigma=1.426178
! Fit after  self-cal, rms=0.067741Jy  sigma=1.426174
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067741Jy  sigma=1.426174
! Fit after  self-cal, rms=0.067690Jy  sigma=1.426134
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.021 mas, bmaj=3.117 mas, bpa=-3.157 degrees
! Estimated noise=0.288752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155813 Jy
! Component: 100  -  total flux cleaned = 0.000219304 Jy
! Component: 150  -  total flux cleaned = 0.000166663 Jy
! Component: 200  -  total flux cleaned = 0.000119984 Jy
! Total flux subtracted in 200 components = 0.000119984 Jy
! Clean residual min=-0.001324 max=0.001525 Jy/beam
! Clean residual mean=-0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.362931 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 134 components and 0.362931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067683Jy  sigma=1.426000
! Fit after  self-cal, rms=0.067681Jy  sigma=1.425980
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.68241e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110618 Jy
! Component: 150  -  total flux cleaned = 0.000110399 Jy
! Component: 200  -  total flux cleaned = 0.000109922 Jy
! Total flux subtracted in 200 components = 0.000109922 Jy
! Clean residual min=-0.001326 max=0.001466 Jy/beam
! Clean residual mean=-0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.363041 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 143 components and 0.363041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067678Jy  sigma=1.425907
! Fit after  self-cal, rms=0.067678Jy  sigma=1.425903
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8995 mas, bmaj=1.993 mas, bpa=-2.415 degrees
! Estimated noise=0.227218 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8995 x 1.993 at -2.415 degrees (North through East)
! Clean map  min=-0.0020784  max=0.27036 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7194 mas, bmaj=1.7 mas, bpa=-4.02 degrees
! Estimated noise=0.384046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194739 Jy
! Component: 100  -  total flux cleaned = 0.263639 Jy
! Component: 150  -  total flux cleaned = 0.29702 Jy
! Component: 200  -  total flux cleaned = 0.315665 Jy
! Total flux subtracted in 200 components = 0.315665 Jy
! Clean residual min=-0.005448 max=0.009693 Jy/beam
! Clean residual mean=0.000004 rms=0.001188 Jy/beam
! Combined flux in latest and established models = 0.315665 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.315665 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8995 mas, bmaj=1.993 mas, bpa=-2.415 degrees
! Estimated noise=0.227218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161929 Jy
! Component: 100  -  total flux cleaned = 0.0255882 Jy
! Component: 150  -  total flux cleaned = 0.0316841 Jy
! Component: 200  -  total flux cleaned = 0.0357591 Jy
! Total flux subtracted in 200 components = 0.0357591 Jy
! Clean residual min=-0.002071 max=0.002429 Jy/beam
! Clean residual mean=0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.351424 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 23 components and 0.351424 Jy
! Inverting map 
! Added new window around map position (12.2, -11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291948 Jy
! Component: 100  -  total flux cleaned = 0.00504277 Jy
! Component: 150  -  total flux cleaned = 0.00650369 Jy
! Component: 200  -  total flux cleaned = 0.00756671 Jy
! Total flux subtracted in 200 components = 0.00756671 Jy
! Clean residual min=-0.001684 max=0.001495 Jy/beam
! Clean residual mean=-0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.358991 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.358991 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.021 mas, bmaj=3.117 mas, bpa=-3.157 degrees
! Estimated noise=0.288752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179431 Jy
! Component: 100  -  total flux cleaned = 0.00270125 Jy
! Component: 150  -  total flux cleaned = 0.0033371 Jy
! Component: 200  -  total flux cleaned = 0.00370732 Jy
! Total flux subtracted in 200 components = 0.00370732 Jy
! Clean residual min=-0.001549 max=0.001633 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.362698 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149893 Jy
! Component: 100  -  total flux cleaned = 0.000256998 Jy
! Component: 150  -  total flux cleaned = 0.000306467 Jy
! Component: 200  -  total flux cleaned = 0.000376128 Jy
! Total flux subtracted in 200 components = 0.000376128 Jy
! Clean residual min=-0.001451 max=0.001568 Jy/beam
! Clean residual mean=-0.000001 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.363074 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 87 components and 0.363074 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8995 mas, bmaj=1.993 mas, bpa=-2.415 degrees
! Estimated noise=0.227218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361138 Jy
! Component: 100  -  total flux cleaned = -0.000162634 Jy
! Component: 150  -  total flux cleaned = 5.31988e-05 Jy
! Component: 200  -  total flux cleaned = 0.000152813 Jy
! Total flux subtracted in 200 components = 0.000152813 Jy
! Clean residual min=-0.001374 max=0.001260 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.363227 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.363227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067708Jy  sigma=1.426599
! Fit after  self-cal, rms=0.067707Jy  sigma=1.426463
wmodel /J0327+0044_X_map.mod
! wmodel: Unable to open new model file: /J0327+0044_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0327+0044_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8995 x 1.993 at -2.415 degrees (North through East)
! Clean map  min=-0.0015965  max=0.26962 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0327+0044_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.269615 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000305102 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.339486 0.339486 0.678973 1.35795 2.71589 5.43178 10.8636 21.7271 43.4542 86.9085
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.269 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  883.688 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0327+0044_X_dfm.log closed on Thu May 19 22:06:43 2016