! Started logfile: /scr/pima/bg219h_uvs/J0320-3837_X_dfm.log on Thu May 19 22:05:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0320-3837_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0320-3837_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.883961 visibilities/baseline/integration-bin.
! Found source: J0320-3837
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23676 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0320-3837_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013803Jy  sigma=17.347635
! Fit after  self-cal, rms=0.836576Jy  sigma=14.092534
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5704 mas, bmaj=1.787 mas, bpa=-9.098 degrees
! Estimated noise=0.69464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13083 Jy
! Component: 100  -  total flux cleaned = 0.160571 Jy
! Total flux subtracted in 100 components = 0.160571 Jy
! Clean residual min=-0.009066 max=0.020779 Jy/beam
! Clean residual mean=0.000029 rms=0.002085 Jy/beam
! Combined flux in latest and established models = 0.160571 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.160571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105740Jy  sigma=1.519022
! Fit after  self-cal, rms=0.105623Jy  sigma=1.517800
! Inverting map 
! Added new window around map position (-1, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016978 Jy
! Component: 100  -  total flux cleaned = 0.0243135 Jy
! Total flux subtracted in 100 components = 0.0243135 Jy
! Clean residual min=-0.007308 max=0.014900 Jy/beam
! Clean residual mean=0.000016 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 0.184884 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.184884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102600Jy  sigma=1.446563
! Fit after  self-cal, rms=0.102232Jy  sigma=1.435881
! Inverting map 
! Added new window around map position (1.4, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114203 Jy
! Component: 100  -  total flux cleaned = 0.0183669 Jy
! Total flux subtracted in 100 components = 0.0183669 Jy
! Clean residual min=-0.006210 max=0.006921 Jy/beam
! Clean residual mean=0.000008 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.203251 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.203251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100569Jy  sigma=1.401458
! Fit after  self-cal, rms=0.100525Jy  sigma=1.400097
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7613 mas, bmaj=2.164 mas, bpa=-7.966 degrees
! Estimated noise=0.298277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0080148 Jy
! Component: 100  -  total flux cleaned = 0.0124421 Jy
! Component: 150  -  total flux cleaned = 0.0143812 Jy
! Component: 200  -  total flux cleaned = 0.0154347 Jy
! Total flux subtracted in 200 components = 0.0154347 Jy
! Clean residual min=-0.004604 max=0.004794 Jy/beam
! Clean residual mean=0.000004 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.218686 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 49 components and 0.218686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099775Jy  sigma=1.386271
! Fit after  self-cal, rms=0.099725Jy  sigma=1.384662
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7613 x 2.164 at -7.966 degrees (North through East)
! Clean map  min=-0.0038709  max=0.15918 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.17     KP        0.99     LA        1.03     
!   MK        1.00     NL        1.09     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.18     KP        1.00     LA        1.01     
!   MK        1.03     NL        1.06     OV        0.97     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.09     KP        0.99     LA        0.99     
!   MK        1.01     NL        1.06     OV        0.98     PT        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.15     KP        0.98     LA        1.03     
!   MK        1.02     NL        1.04     OV        0.96     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.09     KP        1.00     LA        1.00     
!   MK        0.95     NL        1.04     OV        0.98     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.10     KP        0.97     LA        1.04     
!   MK        0.94     NL        1.05     OV        0.98     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.07     KP        0.90     LA        1.02     
!   MK        0.99     NL        1.06     OV        0.95     PT        0.99     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.099725Jy  sigma=1.384662
! Fit after  self-cal, rms=0.103283Jy  sigma=1.380342
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7605 mas, bmaj=2.156 mas, bpa=-7.899 degrees
! Estimated noise=0.299244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363644 Jy
! Component: 100  -  total flux cleaned = 0.00375662 Jy
! Component: 150  -  total flux cleaned = 0.00406641 Jy
! Component: 200  -  total flux cleaned = 0.00433073 Jy
! Total flux subtracted in 200 components = 0.00433073 Jy
! Clean residual min=-0.002874 max=0.002827 Jy/beam
! Clean residual mean=0.000003 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.223017 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 66 components and 0.223017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103053Jy  sigma=1.376341
! Fit after  self-cal, rms=0.103094Jy  sigma=1.375971
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103094Jy  sigma=1.375971
! Fit after  self-cal, rms=0.104216Jy  sigma=1.373959
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7618 mas, bmaj=2.157 mas, bpa=-7.686 degrees
! Estimated noise=0.299861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139204 Jy
! Component: 100  -  total flux cleaned = -0.000142635 Jy
! Component: 150  -  total flux cleaned = -0.00014315 Jy
! Component: 200  -  total flux cleaned = -0.000189617 Jy
! Total flux subtracted in 200 components = -0.000189617 Jy
! Clean residual min=-0.002852 max=0.002543 Jy/beam
! Clean residual mean=0.000004 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.222827 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.222827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104157Jy  sigma=1.373023
! Fit after  self-cal, rms=0.104179Jy  sigma=1.372942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104399 Jy
! Component: 100  -  total flux cleaned = 0.000103636 Jy
! Component: 150  -  total flux cleaned = 2.22265e-05 Jy
! Component: 200  -  total flux cleaned = 2.29013e-05 Jy
! Total flux subtracted in 200 components = 2.29013e-05 Jy
! Clean residual min=-0.002787 max=0.002525 Jy/beam
! Clean residual mean=0.000004 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.22285 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.22285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104138Jy  sigma=1.372500
! Fit after  self-cal, rms=0.104142Jy  sigma=1.372489
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104142Jy  sigma=1.372489
! Fit after  self-cal, rms=0.106297Jy  sigma=1.371076
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7636 mas, bmaj=2.163 mas, bpa=-7.663 degrees
! Estimated noise=0.300245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107588 Jy
! Component: 100  -  total flux cleaned = -0.00145814 Jy
! Component: 150  -  total flux cleaned = -0.00163729 Jy
! Component: 200  -  total flux cleaned = -0.0017674 Jy
! Total flux subtracted in 200 components = -0.0017674 Jy
! Clean residual min=-0.002482 max=0.002374 Jy/beam
! Clean residual mean=0.000002 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.221083 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 91 components and 0.221083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106252Jy  sigma=1.370633
! Fit after  self-cal, rms=0.106287Jy  sigma=1.370549
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245355 Jy
! Component: 100  -  total flux cleaned = -0.000272906 Jy
! Component: 150  -  total flux cleaned = -0.000273418 Jy
! Component: 200  -  total flux cleaned = -0.000299528 Jy
! Total flux subtracted in 200 components = -0.000299528 Jy
! Clean residual min=-0.002352 max=0.002360 Jy/beam
! Clean residual mean=0.000003 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.220783 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.220783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106266Jy  sigma=1.370352
! Fit after  self-cal, rms=0.106270Jy  sigma=1.370348
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106270Jy  sigma=1.370348
! Fit after  self-cal, rms=0.107596Jy  sigma=1.369248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=7.426 mas, bpa=-3.324 degrees
! Estimated noise=0.382863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000758802 Jy
! Component: 100  -  total flux cleaned = -0.00085607 Jy
! Component: 150  -  total flux cleaned = -0.000929009 Jy
! Component: 200  -  total flux cleaned = -0.000930002 Jy
! Total flux subtracted in 200 components = -0.000930002 Jy
! Clean residual min=-0.003083 max=0.002482 Jy/beam
! Clean residual mean=0.000008 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.219853 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 102 components and 0.219853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107593Jy  sigma=1.369075
! Fit after  self-cal, rms=0.107600Jy  sigma=1.369027
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.59846e-05 Jy
! Component: 100  -  total flux cleaned = -3.61864e-05 Jy
! Component: 150  -  total flux cleaned = -3.54966e-05 Jy
! Component: 200  -  total flux cleaned = -3.46496e-05 Jy
! Total flux subtracted in 200 components = -3.46496e-05 Jy
! Clean residual min=-0.003001 max=0.002442 Jy/beam
! Clean residual mean=0.000008 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.219818 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 104 components and 0.219818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107598Jy  sigma=1.369021
! Fit after  self-cal, rms=0.107597Jy  sigma=1.369010
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7645 mas, bmaj=2.164 mas, bpa=-7.598 degrees
! Estimated noise=0.300221 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7645 x 2.164 at -7.598 degrees (North through East)
! Clean map  min=-0.0026296  max=0.16075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5719 mas, bmaj=1.781 mas, bpa=-8.71 degrees
! Estimated noise=0.703983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131902 Jy
! Component: 100  -  total flux cleaned = 0.166055 Jy
! Component: 150  -  total flux cleaned = 0.181063 Jy
! Component: 200  -  total flux cleaned = 0.19025 Jy
! Total flux subtracted in 200 components = 0.19025 Jy
! Clean residual min=-0.005726 max=0.006329 Jy/beam
! Clean residual mean=0.000013 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.19025 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.19025 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7645 mas, bmaj=2.164 mas, bpa=-7.598 degrees
! Estimated noise=0.300221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102653 Jy
! Component: 100  -  total flux cleaned = 0.0167531 Jy
! Component: 150  -  total flux cleaned = 0.0212817 Jy
! Component: 200  -  total flux cleaned = 0.0245052 Jy
! Total flux subtracted in 200 components = 0.0245052 Jy
! Clean residual min=-0.003081 max=0.002951 Jy/beam
! Clean residual mean=0.000007 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.214755 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 47 components and 0.214755 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=7.426 mas, bpa=-3.324 degrees
! Estimated noise=0.382863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338476 Jy
! Component: 100  -  total flux cleaned = 0.00503957 Jy
! Component: 150  -  total flux cleaned = 0.00550452 Jy
! Component: 200  -  total flux cleaned = 0.00560563 Jy
! Total flux subtracted in 200 components = 0.00560563 Jy
! Clean residual min=-0.002859 max=0.002492 Jy/beam
! Clean residual mean=0.000008 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.220361 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.03473e-08 Jy
! Component: 100  -  total flux cleaned = 2.69153e-05 Jy
! Component: 150  -  total flux cleaned = 2.62336e-05 Jy
! Component: 200  -  total flux cleaned = 4.88116e-05 Jy
! Total flux subtracted in 200 components = 4.88116e-05 Jy
! Clean residual min=-0.002842 max=0.002427 Jy/beam
! Clean residual mean=0.000008 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.22041 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.22041 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7645 mas, bmaj=2.164 mas, bpa=-7.598 degrees
! Estimated noise=0.300221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000364067 Jy
! Component: 100  -  total flux cleaned = -0.000366124 Jy
! Component: 150  -  total flux cleaned = -0.000316331 Jy
! Component: 200  -  total flux cleaned = -0.000270557 Jy
! Total flux subtracted in 200 components = -0.000270557 Jy
! Clean residual min=-0.002626 max=0.002498 Jy/beam
! Clean residual mean=0.000004 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.220139 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 0.220139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107681Jy  sigma=1.369798
! Fit after  self-cal, rms=0.107653Jy  sigma=1.369629
wmodel /J0320-3837_X_map.mod
! wmodel: Unable to open new model file: /J0320-3837_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0320-3837_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7645 x 2.164 at -7.598 degrees (North through East)
! Clean map  min=-0.0022863  max=0.15817 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0320-3837_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.158166 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000543324 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.03055 1.03055 2.0611 4.12219 8.24439 16.4888 32.9775 65.9551
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.158 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  291.107 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0320-3837_X_dfm.log closed on Thu May 19 22:05:53 2016