! Started logfile: /scr/pima/bg219h_uvs/J0309+1029_S_dfm.log on Thu May 19 22:05:38 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J0309+1029_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0309+1029_S_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.669841 visibilities/baseline/integration-bin. ! Found source: J0309+1029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 844 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0309+1029_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.071112Jy sigma=21.129109 ! Fit after self-cal, rms=0.629918Jy sigma=12.183525 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=7.325 mas, bpa=-15.49 degrees ! Estimated noise=1.70642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293153 Jy ! Component: 100 - total flux cleaned = 0.362402 Jy ! Total flux subtracted in 100 components = 0.362402 Jy ! Clean residual min=-0.019261 max=0.027339 Jy/beam ! Clean residual mean=-0.000002 rms=0.005670 Jy/beam ! Combined flux in latest and established models = 0.362402 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.362402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098523Jy sigma=1.756061 ! Fit after self-cal, rms=0.098476Jy sigma=1.755206 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.469 mas, bpa=-13.72 degrees ! Estimated noise=1.46195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315481 Jy ! Component: 100 - total flux cleaned = 0.045438 Jy ! Component: 150 - total flux cleaned = 0.0503692 Jy ! Component: 200 - total flux cleaned = 0.0508038 Jy ! Total flux subtracted in 200 components = 0.0508038 Jy ! Clean residual min=-0.013832 max=0.018888 Jy/beam ! Clean residual mean=0.000028 rms=0.003991 Jy/beam ! Combined flux in latest and established models = 0.413206 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.413206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090903Jy sigma=1.514570 ! Fit after self-cal, rms=0.090802Jy sigma=1.513406 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 7.469 at -13.72 degrees (North through East) ! Clean map min=-0.013872 max=0.37788 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.96 KP 1.01 ! LA 1.06 MK 1.02 NL 1.06 OV 0.94 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.96 KP 0.97 ! LA 1.08 MK 1.02 NL 1.12 OV 1.00 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00 KP 0.96 ! LA 1.10 MK 0.99 NL 1.04 OV 0.93 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.96 KP 0.95 ! LA 1.03 MK 0.96 NL 1.05 OV 0.96 ! PT 0.93 SC 0.98 ! ! ! Fit before self-cal, rms=0.090802Jy sigma=1.513406 ! Fit after self-cal, rms=0.088779Jy sigma=1.425090 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.452 mas, bpa=-13.74 degrees ! Estimated noise=1.44045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226992 Jy ! Component: 100 - total flux cleaned = -0.00305999 Jy ! Component: 150 - total flux cleaned = -0.00357782 Jy ! Component: 200 - total flux cleaned = -0.00357754 Jy ! Total flux subtracted in 200 components = -0.00357754 Jy ! Clean residual min=-0.010839 max=0.012074 Jy/beam ! Clean residual mean=0.000008 rms=0.002714 Jy/beam ! Combined flux in latest and established models = 0.409628 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.409628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088366Jy sigma=1.422336 ! Fit after self-cal, rms=0.088419Jy sigma=1.421567 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088419Jy sigma=1.421567 ! Fit after self-cal, rms=0.088001Jy sigma=1.420549 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.464 mas, bpa=-13.75 degrees ! Estimated noise=1.43262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189111 Jy ! Component: 100 - total flux cleaned = -0.00257395 Jy ! Component: 150 - total flux cleaned = -0.00277638 Jy ! Component: 200 - total flux cleaned = -0.00289612 Jy ! Total flux subtracted in 200 components = -0.00289612 Jy ! Clean residual min=-0.010734 max=0.011650 Jy/beam ! Clean residual mean=0.000009 rms=0.002658 Jy/beam ! Combined flux in latest and established models = 0.406732 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.406732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087732Jy sigma=1.419197 ! Fit after self-cal, rms=0.087727Jy sigma=1.418800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00986625 Jy ! Component: 100 - total flux cleaned = 0.0122224 Jy ! Component: 150 - total flux cleaned = 0.0131089 Jy ! Component: 200 - total flux cleaned = 0.013711 Jy ! Total flux subtracted in 200 components = 0.013711 Jy ! Clean residual min=-0.010356 max=0.008437 Jy/beam ! Clean residual mean=0.000018 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.420443 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.420443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086311Jy sigma=1.394682 ! Fit after self-cal, rms=0.086270Jy sigma=1.393136 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086270Jy sigma=1.393136 ! Fit after self-cal, rms=0.085418Jy sigma=1.387609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.478 mas, bpa=-13.84 degrees ! Estimated noise=1.42264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327613 Jy ! Component: 100 - total flux cleaned = 0.0037059 Jy ! Component: 150 - total flux cleaned = 0.0036169 Jy ! Component: 200 - total flux cleaned = 0.00315776 Jy ! Total flux subtracted in 200 components = 0.00315776 Jy ! Clean residual min=-0.009189 max=0.007703 Jy/beam ! Clean residual mean=0.000019 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.423601 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 98 components and 0.423601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084826Jy sigma=1.381504 ! Fit after self-cal, rms=0.084800Jy sigma=1.380768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741173 Jy ! Component: 100 - total flux cleaned = 0.000245121 Jy ! Component: 150 - total flux cleaned = -4.75345e-05 Jy ! Component: 200 - total flux cleaned = -0.000376411 Jy ! Total flux subtracted in 200 components = -0.000376411 Jy ! Clean residual min=-0.008850 max=0.007650 Jy/beam ! Clean residual mean=0.000019 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.423224 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 0.423224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084552Jy sigma=1.379368 ! Fit after self-cal, rms=0.084551Jy sigma=1.379090 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084551Jy sigma=1.379090 ! Fit after self-cal, rms=0.083916Jy sigma=1.376144 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.041 mas, bmaj=10.19 mas, bpa=-4.929 degrees ! Estimated noise=1.84457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.29851e-08 Jy ! Component: 100 - total flux cleaned = -0.000300719 Jy ! Component: 150 - total flux cleaned = -0.00132862 Jy ! Component: 200 - total flux cleaned = -0.00210974 Jy ! Total flux subtracted in 200 components = -0.00210974 Jy ! Clean residual min=-0.009091 max=0.010811 Jy/beam ! Clean residual mean=0.000054 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.421114 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 133 components and 0.421114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083674Jy sigma=1.376330 ! Fit after self-cal, rms=0.083653Jy sigma=1.375697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344722 Jy ! Component: 100 - total flux cleaned = -0.00102463 Jy ! Component: 150 - total flux cleaned = -0.0015299 Jy ! Component: 200 - total flux cleaned = -0.00192029 Jy ! Total flux subtracted in 200 components = -0.00192029 Jy ! Clean residual min=-0.008647 max=0.011085 Jy/beam ! Clean residual mean=0.000050 rms=0.002688 Jy/beam ! Combined flux in latest and established models = 0.419194 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 149 components and 0.419194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083538Jy sigma=1.376268 ! Fit after self-cal, rms=0.083540Jy sigma=1.375972 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.493 mas, bpa=-13.9 degrees ! Estimated noise=1.41444 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.493 at -13.9 degrees (North through East) ! Clean map min=-0.0075748 max=0.36393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=7.356 mas, bpa=-15.7 degrees ! Estimated noise=1.64336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.282188 Jy ! Component: 100 - total flux cleaned = 0.349412 Jy ! Component: 150 - total flux cleaned = 0.378498 Jy ! Component: 200 - total flux cleaned = 0.394754 Jy ! Total flux subtracted in 200 components = 0.394754 Jy ! Clean residual min=-0.012351 max=0.012366 Jy/beam ! Clean residual mean=0.000001 rms=0.002964 Jy/beam ! Combined flux in latest and established models = 0.394754 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.394754 Jy ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.493 mas, bpa=-13.9 degrees ! Estimated noise=1.41444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014322 Jy ! Component: 100 - total flux cleaned = 0.0192827 Jy ! Component: 150 - total flux cleaned = 0.0220815 Jy ! Component: 200 - total flux cleaned = 0.0235112 Jy ! Total flux subtracted in 200 components = 0.0235112 Jy ! Clean residual min=-0.008730 max=0.007098 Jy/beam ! Clean residual mean=0.000018 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 0.418265 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.418265 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.041 mas, bmaj=10.19 mas, bpa=-4.929 degrees ! Estimated noise=1.84457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379656 Jy ! Component: 100 - total flux cleaned = 0.0036931 Jy ! Component: 150 - total flux cleaned = 0.00340555 Jy ! Component: 200 - total flux cleaned = 0.00285931 Jy ! Total flux subtracted in 200 components = 0.00285931 Jy ! Clean residual min=-0.009878 max=0.010475 Jy/beam ! Clean residual mean=0.000054 rms=0.002709 Jy/beam ! Combined flux in latest and established models = 0.421124 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000405701 Jy ! Component: 100 - total flux cleaned = -0.000817896 Jy ! Component: 150 - total flux cleaned = -0.0010764 Jy ! Component: 200 - total flux cleaned = -0.00126425 Jy ! Total flux subtracted in 200 components = -0.00126425 Jy ! Clean residual min=-0.009295 max=0.010445 Jy/beam ! Clean residual mean=0.000052 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.41986 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 85 components and 0.41986 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.493 mas, bpa=-13.9 degrees ! Estimated noise=1.41444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556536 Jy ! Component: 100 - total flux cleaned = 0.000910686 Jy ! Component: 150 - total flux cleaned = 0.000971668 Jy ! Component: 200 - total flux cleaned = 0.00108306 Jy ! Total flux subtracted in 200 components = 0.00108306 Jy ! Clean residual min=-0.008070 max=0.007200 Jy/beam ! Clean residual mean=0.000019 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.420943 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.420943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083324Jy sigma=1.373743 ! Fit after self-cal, rms=0.083291Jy sigma=1.372695 wmodel /J0309+1029_S_map.mod ! wmodel: Unable to open new model file: /J0309+1029_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J0309+1029_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.493 at -13.9 degrees (North through East) ! Clean map min=-0.0076015 max=0.35937 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0309+1029_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.359368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00179688 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.50003 1.50003 3.00007 6.00014 12.0003 24.0005 48.0011 96.0022 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0053 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.359 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 199.995 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0309+1029_S_dfm.log closed on Thu May 19 22:05:40 2016