! Started logfile: /scr/pima/bg219h_uvs/J0242-2132_X_dfm.log on Thu May 19 22:04:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0242-2132_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0242-2132_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.715873 visibilities/baseline/integration-bin.
! Found source: J0242-2132
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10824 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0242-2132_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019678Jy  sigma=21.617522
! Fit after  self-cal, rms=0.875679Jy  sigma=18.451007
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6833 mas, bmaj=1.626 mas, bpa=-3.158 degrees
! Estimated noise=0.631406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0752345 Jy
! Component: 100  -  total flux cleaned = 0.112291 Jy
! Total flux subtracted in 100 components = 0.112291 Jy
! Clean residual min=-0.012107 max=0.019976 Jy/beam
! Clean residual mean=-0.000020 rms=0.003024 Jy/beam
! Combined flux in latest and established models = 0.112291 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.112291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105043Jy  sigma=2.186249
! Fit after  self-cal, rms=0.104610Jy  sigma=2.176375
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252365 Jy
! Component: 100  -  total flux cleaned = 0.042577 Jy
! Total flux subtracted in 100 components = 0.042577 Jy
! Clean residual min=-0.009690 max=0.016082 Jy/beam
! Clean residual mean=-0.000012 rms=0.002266 Jy/beam
! Combined flux in latest and established models = 0.154868 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 37 components and 0.154868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089899Jy  sigma=1.834999
! Fit after  self-cal, rms=0.089856Jy  sigma=1.833587
! Inverting map 
! Added new window around map position (-1.6, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016588 Jy
! Component: 100  -  total flux cleaned = 0.0284289 Jy
! Total flux subtracted in 100 components = 0.0284289 Jy
! Clean residual min=-0.007812 max=0.011035 Jy/beam
! Clean residual mean=-0.000008 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.183297 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.183297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083330Jy  sigma=1.680353
! Fit after  self-cal, rms=0.083016Jy  sigma=1.671630
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8922 mas, bmaj=2.168 mas, bpa=-3.485 degrees
! Estimated noise=0.362836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205952 Jy
! Component: 100  -  total flux cleaned = 0.0331922 Jy
! Component: 150  -  total flux cleaned = 0.0411696 Jy
! Component: 200  -  total flux cleaned = 0.0463196 Jy
! Total flux subtracted in 200 components = 0.0463196 Jy
! Clean residual min=-0.009329 max=0.011914 Jy/beam
! Clean residual mean=-0.000003 rms=0.002646 Jy/beam
! Combined flux in latest and established models = 0.229617 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 73 components and 0.229617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077610Jy  sigma=1.541886
! Fit after  self-cal, rms=0.077389Jy  sigma=1.535788
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8922 x 2.168 at -3.485 degrees (North through East)
! Clean map  min=-0.0092945  max=0.11081 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.88     HN        1.04     KP        1.00     
!   LA        0.96     MK        1.04     NL        1.14     OV        0.94     
!   PT        1.07     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.84     HN        0.99     KP        1.04     
!   LA        0.93     MK        0.95     NL        1.12     OV        0.98     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.87     HN        0.97     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.04     OV        0.99     
!   PT        1.08     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.86     HN        0.94     KP        1.01     
!   LA        0.93     MK        0.93     NL        1.18     OV        0.96     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.86     HN        0.93     KP        1.01     
!   LA        0.99     MK        1.05     NL        1.11     OV        0.99     
!   PT        1.03     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.91     HN        0.93     KP        0.97     
!   LA        0.96     MK        1.03     NL        1.16     OV        0.96     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.85     HN        1.00     KP        1.06     
!   LA        0.97     MK        0.92     NL        1.12     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.86     HN        0.99     KP        1.02     
!   LA        0.96     MK        0.92     NL        1.20     OV        1.00     
!   PT        1.03     SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.87     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.15     OV        1.04     
!   PT        1.03     SC        1.09     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        0.92     KP        1.00     
!   LA        0.94     MK        1.04     NL        1.07     OV        0.96     
!   PT        1.07     SC        1.09     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.077389Jy  sigma=1.535788
! Fit after  self-cal, rms=0.076185Jy  sigma=1.503316
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8974 mas, bmaj=2.198 mas, bpa=-4.012 degrees
! Estimated noise=0.363368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121745 Jy
! Component: 100  -  total flux cleaned = 0.00114916 Jy
! Component: 150  -  total flux cleaned = 0.0012569 Jy
! Component: 200  -  total flux cleaned = 0.00130702 Jy
! Total flux subtracted in 200 components = 0.00130702 Jy
! Clean residual min=-0.007580 max=0.008982 Jy/beam
! Clean residual mean=-0.000013 rms=0.002253 Jy/beam
! Combined flux in latest and established models = 0.230924 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 84 components and 0.230924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076074Jy  sigma=1.501407
! Fit after  self-cal, rms=0.076133Jy  sigma=1.500573
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076133Jy  sigma=1.500573
! Fit after  self-cal, rms=0.075332Jy  sigma=1.491986
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9001 mas, bmaj=2.208 mas, bpa=-4.256 degrees
! Estimated noise=0.362332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313651 Jy
! Component: 100  -  total flux cleaned = 0.000378768 Jy
! Component: 150  -  total flux cleaned = 0.000376838 Jy
! Component: 200  -  total flux cleaned = 0.000326809 Jy
! Total flux subtracted in 200 components = 0.000326809 Jy
! Clean residual min=-0.007063 max=0.008869 Jy/beam
! Clean residual mean=-0.000006 rms=0.002025 Jy/beam
! Combined flux in latest and established models = 0.231251 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 87 components and 0.231251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075239Jy  sigma=1.489890
! Fit after  self-cal, rms=0.075256Jy  sigma=1.489331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.6, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00837087 Jy
! Component: 100  -  total flux cleaned = 0.0131073 Jy
! Component: 150  -  total flux cleaned = 0.016122 Jy
! Component: 200  -  total flux cleaned = 0.017845 Jy
! Total flux subtracted in 200 components = 0.017845 Jy
! Clean residual min=-0.005567 max=0.006446 Jy/beam
! Clean residual mean=-0.000005 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 0.249096 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 120 components and 0.249096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074292Jy  sigma=1.467160
! Fit after  self-cal, rms=0.074081Jy  sigma=1.462483
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074081Jy  sigma=1.462483
! Fit after  self-cal, rms=0.073205Jy  sigma=1.458544
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9009 mas, bmaj=2.207 mas, bpa=-4.586 degrees
! Estimated noise=0.359281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00449989 Jy
! Component: 100  -  total flux cleaned = 0.00670218 Jy
! Component: 150  -  total flux cleaned = 0.00754774 Jy
! Component: 200  -  total flux cleaned = 0.00800336 Jy
! Total flux subtracted in 200 components = 0.00800336 Jy
! Clean residual min=-0.004822 max=0.005521 Jy/beam
! Clean residual mean=-0.000002 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.257099 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 142 components and 0.257099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072906Jy  sigma=1.451258
! Fit after  self-cal, rms=0.072837Jy  sigma=1.449859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235023 Jy
! Component: 100  -  total flux cleaned = 0.00286608 Jy
! Component: 150  -  total flux cleaned = 0.00302493 Jy
! Component: 200  -  total flux cleaned = 0.0032156 Jy
! Total flux subtracted in 200 components = 0.0032156 Jy
! Clean residual min=-0.004768 max=0.005654 Jy/beam
! Clean residual mean=-0.000002 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.260315 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 152 components and 0.260315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072735Jy  sigma=1.447609
! Fit after  self-cal, rms=0.072720Jy  sigma=1.447283
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072720Jy  sigma=1.447283
! Fit after  self-cal, rms=0.072178Jy  sigma=1.445409
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.281 mas, bmaj=4.977 mas, bpa=-3.217 degrees
! Estimated noise=0.451425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465033 Jy
! Component: 100  -  total flux cleaned = 0.00530883 Jy
! Component: 150  -  total flux cleaned = 0.00545296 Jy
! Component: 200  -  total flux cleaned = 0.0055812 Jy
! Total flux subtracted in 200 components = 0.0055812 Jy
! Clean residual min=-0.007604 max=0.009959 Jy/beam
! Clean residual mean=-0.000002 rms=0.002654 Jy/beam
! Combined flux in latest and established models = 0.265896 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 163 components and 0.265896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072148Jy  sigma=1.443651
! Fit after  self-cal, rms=0.072085Jy  sigma=1.442587
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187817 Jy
! Component: 100  -  total flux cleaned = 0.0020781 Jy
! Component: 150  -  total flux cleaned = 0.00213573 Jy
! Component: 200  -  total flux cleaned = 0.00218993 Jy
! Total flux subtracted in 200 components = 0.00218993 Jy
! Clean residual min=-0.007701 max=0.009866 Jy/beam
! Clean residual mean=-0.000002 rms=0.002586 Jy/beam
! Combined flux in latest and established models = 0.268086 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 165 components and 0.268086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072115Jy  sigma=1.442733
! Fit after  self-cal, rms=0.072095Jy  sigma=1.442436
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9006 mas, bmaj=2.205 mas, bpa=-4.803 degrees
! Estimated noise=0.357151 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9006 x 2.205 at -4.803 degrees (North through East)
! Clean map  min=-0.0049558  max=0.1079 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6912 mas, bmaj=1.648 mas, bpa=-4.731 degrees
! Estimated noise=0.634547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0758613 Jy
! Component: 100  -  total flux cleaned = 0.11377 Jy
! Component: 150  -  total flux cleaned = 0.139977 Jy
! Component: 200  -  total flux cleaned = 0.159085 Jy
! Total flux subtracted in 200 components = 0.159085 Jy
! Clean residual min=-0.009645 max=0.012064 Jy/beam
! Clean residual mean=-0.000012 rms=0.002114 Jy/beam
! Combined flux in latest and established models = 0.159085 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.159085 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9006 mas, bmaj=2.205 mas, bpa=-4.803 degrees
! Estimated noise=0.357151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274932 Jy
! Component: 100  -  total flux cleaned = 0.0454375 Jy
! Component: 150  -  total flux cleaned = 0.058777 Jy
! Component: 200  -  total flux cleaned = 0.0690564 Jy
! Total flux subtracted in 200 components = 0.0690564 Jy
! Clean residual min=-0.006808 max=0.008615 Jy/beam
! Clean residual mean=-0.000009 rms=0.002001 Jy/beam
! Combined flux in latest and established models = 0.228141 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 79 components and 0.228141 Jy
! Inverting map 
! Added new window around map position (1.2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00916404 Jy
! Component: 100  -  total flux cleaned = 0.0160164 Jy
! Component: 150  -  total flux cleaned = 0.0216068 Jy
! Component: 200  -  total flux cleaned = 0.0262168 Jy
! Total flux subtracted in 200 components = 0.0262168 Jy
! Clean residual min=-0.005286 max=0.005621 Jy/beam
! Clean residual mean=-0.000003 rms=0.001506 Jy/beam
! Combined flux in latest and established models = 0.254358 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 114 components and 0.254358 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.281 mas, bmaj=4.977 mas, bpa=-3.217 degrees
! Estimated noise=0.451425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740266 Jy
! Component: 100  -  total flux cleaned = 0.0123875 Jy
! Component: 150  -  total flux cleaned = 0.0144614 Jy
! Component: 200  -  total flux cleaned = 0.0157752 Jy
! Total flux subtracted in 200 components = 0.0157752 Jy
! Clean residual min=-0.007216 max=0.008108 Jy/beam
! Clean residual mean=0.000000 rms=0.002368 Jy/beam
! Combined flux in latest and established models = 0.270133 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000499783 Jy
! Component: 100  -  total flux cleaned = 0.000937446 Jy
! Component: 150  -  total flux cleaned = 0.0012463 Jy
! Component: 200  -  total flux cleaned = 0.00145662 Jy
! Total flux subtracted in 200 components = 0.00145662 Jy
! Clean residual min=-0.006846 max=0.008165 Jy/beam
! Clean residual mean=0.000001 rms=0.002292 Jy/beam
! Combined flux in latest and established models = 0.27159 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 156 components and 0.27159 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9006 mas, bmaj=2.205 mas, bpa=-4.803 degrees
! Estimated noise=0.357151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230869 Jy
! Component: 100  -  total flux cleaned = 0.000635254 Jy
! Component: 150  -  total flux cleaned = 0.000851086 Jy
! Component: 200  -  total flux cleaned = 0.000851727 Jy
! Total flux subtracted in 200 components = 0.000851727 Jy
! Clean residual min=-0.004446 max=0.005207 Jy/beam
! Clean residual mean=0.000001 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.272441 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 177 components and 0.272441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071737Jy  sigma=1.435662
! Fit after  self-cal, rms=0.071608Jy  sigma=1.433118
wmodel /J0242-2132_X_map.mod
! wmodel: Unable to open new model file: /J0242-2132_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0242-2132_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9006 x 2.205 at -4.803 degrees (North through East)
! Clean map  min=-0.0044754  max=0.10808 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0242-2132_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.108081 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00128812 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.57541 3.57541 7.15083 14.3017 28.6033 57.2066
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0038 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.108 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  83.906 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0242-2132_X_dfm.log closed on Thu May 19 22:05:02 2016