! Started logfile: /scr/pima/bg219h_uvs/J0238+4712_X_dfm.log on Thu May 19 22:04:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0238+4712_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0238+4712_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.983333 visibilities/baseline/integration-bin.
! Found source: J0238+4712
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27612 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0238+4712_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003286Jy  sigma=25.065662
! Fit after  self-cal, rms=0.912053Jy  sigma=22.761698
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8159 mas, bmaj=0.9964 mas, bpa=-13.44 degrees
! Estimated noise=0.409535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0672048 Jy
! Component: 100  -  total flux cleaned = 0.0838503 Jy
! Total flux subtracted in 100 components = 0.0838503 Jy
! Clean residual min=-0.003357 max=0.006401 Jy/beam
! Clean residual mean=0.000006 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.0838503 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0838503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061604Jy  sigma=1.433738
! Fit after  self-cal, rms=0.061505Jy  sigma=1.431059
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00690675 Jy
! Component: 100  -  total flux cleaned = 0.0102916 Jy
! Total flux subtracted in 100 components = 0.0102916 Jy
! Clean residual min=-0.002953 max=0.004815 Jy/beam
! Clean residual mean=0.000002 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.0941419 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.0941419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060602Jy  sigma=1.403887
! Fit after  self-cal, rms=0.060600Jy  sigma=1.403503
! Inverting map 
! Added new window around map position (-1.2, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419804 Jy
! Component: 100  -  total flux cleaned = 0.00653538 Jy
! Total flux subtracted in 100 components = 0.00653538 Jy
! Clean residual min=-0.002733 max=0.002692 Jy/beam
! Clean residual mean=-0.000000 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.100677 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.100677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060333Jy  sigma=1.396415
! Fit after  self-cal, rms=0.060302Jy  sigma=1.395465
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.294 mas, bpa=-8.631 degrees
! Estimated noise=0.180408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179664 Jy
! Component: 100  -  total flux cleaned = 0.00259794 Jy
! Component: 150  -  total flux cleaned = 0.00276557 Jy
! Component: 200  -  total flux cleaned = 0.0028442 Jy
! Total flux subtracted in 200 components = 0.0028442 Jy
! Clean residual min=-0.001811 max=0.001528 Jy/beam
! Clean residual mean=0.000003 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.103522 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.103522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060247Jy  sigma=1.394077
! Fit after  self-cal, rms=0.060246Jy  sigma=1.393919
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 1.294 at -8.631 degrees (North through East)
! Clean map  min=-0.0016792  max=0.088527 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.00     OV        1.04     
!   PT        1.01     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.98     KP        1.01     
!   LA        0.96     MK        0.99     NL        0.99     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.04     KP        1.04     
!   LA        0.93     MK        1.03     NL        1.00     OV        0.99     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.08     KP        1.04     
!   LA        1.00     MK        1.01     NL        0.96     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.08     KP        1.01     
!   LA        0.98     MK        1.04     NL        1.01     OV        1.02     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.01     KP        1.01     
!   LA        0.95     MK        1.04     NL        0.99     OV        1.02     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.03     KP        1.00     
!   LA        0.96     MK        1.04     NL        0.99     OV        0.99     
!   PT        1.03     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.07     KP        1.01     
!   LA        0.99     MK        0.98     NL        0.99     OV        1.04     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.02     KP        1.00     
!   LA        0.96     MK        1.07     NL        1.00     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.98     KP        1.06     
!   LA        0.93     MK        0.99     NL        0.98     OV        1.04     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.96     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.02     OV        1.04     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.97     KP        1.03     
!   LA        0.94     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.01     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.060246Jy  sigma=1.393919
! Fit after  self-cal, rms=0.060560Jy  sigma=1.390722
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.102 mas, bmaj=1.297 mas, bpa=-7.967 degrees
! Estimated noise=0.180808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.66486e-07 Jy
! Component: 100  -  total flux cleaned = -1.79696e-05 Jy
! Component: 150  -  total flux cleaned = -5.13925e-06 Jy
! Component: 200  -  total flux cleaned = -5.78492e-06 Jy
! Total flux subtracted in 200 components = -5.78492e-06 Jy
! Clean residual min=-0.001308 max=0.001436 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.103516 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.103516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060548Jy  sigma=1.390519
! Fit after  self-cal, rms=0.060563Jy  sigma=1.390424
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060563Jy  sigma=1.390424
! Fit after  self-cal, rms=0.061350Jy  sigma=1.386256
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.107 mas, bmaj=1.292 mas, bpa=-9.554 degrees
! Estimated noise=0.181065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133865 Jy
! Component: 100  -  total flux cleaned = -0.000212477 Jy
! Component: 150  -  total flux cleaned = -0.000277314 Jy
! Component: 200  -  total flux cleaned = -0.000289089 Jy
! Total flux subtracted in 200 components = -0.000289089 Jy
! Clean residual min=-0.001187 max=0.001217 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.103227 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.103227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061341Jy  sigma=1.386100
! Fit after  self-cal, rms=0.061360Jy  sigma=1.386000
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-44.8, 48.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903231 Jy
! Component: 100  -  total flux cleaned = 0.000996351 Jy
! Component: 150  -  total flux cleaned = 0.00101302 Jy
! Component: 200  -  total flux cleaned = 0.000998191 Jy
! Total flux subtracted in 200 components = 0.000998191 Jy
! Clean residual min=-0.001140 max=0.001120 Jy/beam
! Clean residual mean=-0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.104225 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.104225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061340Jy  sigma=1.385528
! Fit after  self-cal, rms=0.061340Jy  sigma=1.385487
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061340Jy  sigma=1.385487
! Fit after  self-cal, rms=0.061314Jy  sigma=1.385424
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.291 mas, bpa=-10.07 degrees
! Estimated noise=0.180914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298268 Jy
! Component: 100  -  total flux cleaned = 0.00028365 Jy
! Component: 150  -  total flux cleaned = 0.000256446 Jy
! Component: 200  -  total flux cleaned = 0.000231109 Jy
! Total flux subtracted in 200 components = 0.000231109 Jy
! Clean residual min=-0.001140 max=0.001104 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.104456 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 57 components and 0.104456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061307Jy  sigma=1.385270
! Fit after  self-cal, rms=0.061306Jy  sigma=1.385262
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.92122e-05 Jy
! Component: 100  -  total flux cleaned = 4.57571e-05 Jy
! Component: 150  -  total flux cleaned = 3.47691e-05 Jy
! Component: 200  -  total flux cleaned = 3.4707e-05 Jy
! Total flux subtracted in 200 components = 3.4707e-05 Jy
! Clean residual min=-0.001131 max=0.001110 Jy/beam
! Clean residual mean=-0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.104491 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 60 components and 0.104491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061302Jy  sigma=1.385175
! Fit after  self-cal, rms=0.061302Jy  sigma=1.385171
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061302Jy  sigma=1.385171
! Fit after  self-cal, rms=0.061265Jy  sigma=1.385157
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=2.401 mas, bpa=21.37 degrees
! Estimated noise=0.219978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266633 Jy
! Component: 100  -  total flux cleaned = 0.000364062 Jy
! Component: 150  -  total flux cleaned = 0.000394957 Jy
! Component: 200  -  total flux cleaned = 0.000407814 Jy
! Total flux subtracted in 200 components = 0.000407814 Jy
! Clean residual min=-0.000978 max=0.001215 Jy/beam
! Clean residual mean=-0.000003 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.104898 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.104898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061264Jy  sigma=1.385128
! Fit after  self-cal, rms=0.061263Jy  sigma=1.385123
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-25.8, -24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000748227 Jy
! Component: 100  -  total flux cleaned = 0.000846752 Jy
! Component: 150  -  total flux cleaned = 0.000907247 Jy
! Component: 200  -  total flux cleaned = 0.000907343 Jy
! Total flux subtracted in 200 components = 0.000907343 Jy
! Clean residual min=-0.000884 max=0.000968 Jy/beam
! Clean residual mean=-0.000003 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.105806 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 0.105806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061247Jy  sigma=1.384729
! Fit after  self-cal, rms=0.061246Jy  sigma=1.384704
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.291 mas, bpa=-10.47 degrees
! Estimated noise=0.180773 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.105 x 1.291 at -10.47 degrees (North through East)
! Clean map  min=-0.00099662  max=0.08864 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8185 mas, bmaj=0.9941 mas, bpa=-15.19 degrees
! Estimated noise=0.411283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.067353 Jy
! Component: 100  -  total flux cleaned = 0.0845269 Jy
! Component: 150  -  total flux cleaned = 0.0916829 Jy
! Component: 200  -  total flux cleaned = 0.0958175 Jy
! Total flux subtracted in 200 components = 0.0958175 Jy
! Clean residual min=-0.002586 max=0.002525 Jy/beam
! Clean residual mean=0.000001 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.0958174 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0958174 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.291 mas, bpa=-10.47 degrees
! Estimated noise=0.180773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351875 Jy
! Component: 100  -  total flux cleaned = 0.00543901 Jy
! Component: 150  -  total flux cleaned = 0.00674998 Jy
! Component: 200  -  total flux cleaned = 0.00777995 Jy
! Total flux subtracted in 200 components = 0.00777995 Jy
! Clean residual min=-0.001207 max=0.001057 Jy/beam
! Clean residual mean=0.000000 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.103597 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 33 components and 0.103597 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=2.401 mas, bpa=21.37 degrees
! Estimated noise=0.219978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000856407 Jy
! Component: 100  -  total flux cleaned = 0.00124263 Jy
! Component: 150  -  total flux cleaned = 0.0014893 Jy
! Component: 200  -  total flux cleaned = 0.00165878 Jy
! Total flux subtracted in 200 components = 0.00165878 Jy
! Clean residual min=-0.001115 max=0.000985 Jy/beam
! Clean residual mean=-0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.105256 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131461 Jy
! Component: 100  -  total flux cleaned = 0.000234206 Jy
! Component: 150  -  total flux cleaned = 0.000361028 Jy
! Component: 200  -  total flux cleaned = 0.000462669 Jy
! Total flux subtracted in 200 components = 0.000462669 Jy
! Clean residual min=-0.001042 max=0.000968 Jy/beam
! Clean residual mean=-0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.105719 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 107 components and 0.105719 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.291 mas, bpa=-10.47 degrees
! Estimated noise=0.180773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.89772e-05 Jy
! Component: 100  -  total flux cleaned = 8.98647e-05 Jy
! Component: 150  -  total flux cleaned = 6.65379e-05 Jy
! Component: 200  -  total flux cleaned = 8.76352e-05 Jy
! Total flux subtracted in 200 components = 8.76352e-05 Jy
! Clean residual min=-0.001036 max=0.000923 Jy/beam
! Clean residual mean=-0.000001 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.105806 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 119 components and 0.105806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061235Jy  sigma=1.384546
! Fit after  self-cal, rms=0.061230Jy  sigma=1.384477
wmodel /J0238+4712_X_map.mod
! wmodel: Unable to open new model file: /J0238+4712_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0238+4712_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.105 x 1.291 at -10.47 degrees (North through East)
! Clean map  min=-0.00094546  max=0.088465 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0238+4712_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0884653 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000220397 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.7474 0.7474 1.4948 2.9896 5.9792 11.9584 23.9168 47.8336 95.6672
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  401.391 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0238+4712_X_dfm.log closed on Thu May 19 22:04:46 2016