! Started logfile: /scr/pima/bg219h_uvs/J0237+2848_X_uvs.log on Thu Apr 7 11:58:18 2016 obs /scr/pima/bg219h_uvs/J0237+2848_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0237+2848_X_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.906349 visibilities/baseline/integration-bin. ! Found source: J0237+2848 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6852 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0237+2848_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.981593Jy sigma=34.429875 ! Fit after self-cal, rms=0.858908Jy sigma=13.390844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7151 mas, bmaj=1.899 mas, bpa=20.3 degrees ! Estimated noise=0.868962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09045 Jy ! Component: 100 - total flux cleaned = 1.42949 Jy ! Total flux subtracted in 100 components = 1.42949 Jy ! Clean residual min=-0.069873 max=0.171863 Jy/beam ! Clean residual mean=-0.000154 rms=0.020937 Jy/beam ! Combined flux in latest and established models = 1.42949 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.42949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.618477Jy sigma=9.256531 ! Fit after self-cal, rms=0.617333Jy sigma=9.231978 ! Inverting map ! Added new window around map position (-0.8, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203166 Jy ! Component: 100 - total flux cleaned = 0.339166 Jy ! Total flux subtracted in 100 components = 0.339166 Jy ! Clean residual min=-0.055574 max=0.083346 Jy/beam ! Clean residual mean=-0.000101 rms=0.013921 Jy/beam ! Combined flux in latest and established models = 1.76866 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 1.76866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.485594Jy sigma=7.153024 ! Fit after self-cal, rms=0.482796Jy sigma=7.088018 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106369 Jy ! Component: 100 - total flux cleaned = 0.182236 Jy ! Total flux subtracted in 100 components = 0.182236 Jy ! Clean residual min=-0.045376 max=0.059394 Jy/beam ! Clean residual mean=-0.000074 rms=0.010931 Jy/beam ! Combined flux in latest and established models = 1.95089 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 1.95089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.432811Jy sigma=6.312792 ! Fit after self-cal, rms=0.432008Jy sigma=6.292683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8598 mas, bmaj=2.005 mas, bpa=21.95 degrees ! Estimated noise=0.680648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0993692 Jy ! Component: 100 - total flux cleaned = 0.170696 Jy ! Component: 150 - total flux cleaned = 0.227336 Jy ! Component: 200 - total flux cleaned = 0.272901 Jy ! Total flux subtracted in 200 components = 0.272901 Jy ! Clean residual min=-0.041494 max=0.053594 Jy/beam ! Clean residual mean=-0.000113 rms=0.009616 Jy/beam ! Combined flux in latest and established models = 2.22379 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 67 components and 2.2238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.389283Jy sigma=5.668006 ! Fit after self-cal, rms=0.388614Jy sigma=5.649016 ! Inverting map ! Added new window around map position (6, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538794 Jy ! Component: 100 - total flux cleaned = 0.0917238 Jy ! Component: 150 - total flux cleaned = 0.122329 Jy ! Component: 200 - total flux cleaned = 0.144147 Jy ! Total flux subtracted in 200 components = 0.144147 Jy ! Clean residual min=-0.035069 max=0.044230 Jy/beam ! Clean residual mean=-0.000074 rms=0.007700 Jy/beam ! Combined flux in latest and established models = 2.36794 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 94 components and 2.36794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.375652Jy sigma=5.443576 ! Fit after self-cal, rms=0.375052Jy sigma=5.426906 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8598 x 2.005 at 21.95 degrees (North through East) ! Clean map min=-0.032833 max=1.4848 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.04 KP 0.96 ! LA 0.95 MK 1.06 NL 0.99 OV 1.00 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 0.96 ! LA 0.97 MK 1.05 NL 0.96 OV 1.02 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.03 KP 0.99 ! LA 0.97 MK 1.02 NL 0.95 OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.04 KP 0.99 ! LA 0.94 MK 1.08 NL 0.95 OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 0.98 ! LA 0.97 MK 1.09 NL 0.97 OV 1.00 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.02 KP 0.96 ! LA 0.94 MK 1.08 NL 0.97 OV 1.00 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.03 KP 0.97 ! LA 0.94 MK 1.07 NL 0.98 OV 0.99 ! PT 0.95 SC 1.00 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.375052Jy sigma=5.426906 ! Fit after self-cal, rms=0.363077Jy sigma=5.271930 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8693 mas, bmaj=2.017 mas, bpa=22.3 degrees ! Estimated noise=0.67373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0170993 Jy ! Component: 100 - total flux cleaned = -0.0197056 Jy ! Component: 150 - total flux cleaned = -0.020794 Jy ! Component: 200 - total flux cleaned = -0.0216559 Jy ! Total flux subtracted in 200 components = -0.0216559 Jy ! Clean residual min=-0.028260 max=0.025192 Jy/beam ! Clean residual mean=-0.000025 rms=0.005315 Jy/beam ! Combined flux in latest and established models = 2.34629 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 2.34629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.360336Jy sigma=5.244130 ! Fit after self-cal, rms=0.360293Jy sigma=5.240986 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.360293Jy sigma=5.240986 ! Fit after self-cal, rms=0.349151Jy sigma=5.083494 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.002 mas, bpa=21.95 degrees ! Estimated noise=0.668106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0159513 Jy ! Component: 100 - total flux cleaned = -0.0168971 Jy ! Component: 150 - total flux cleaned = -0.0183693 Jy ! Component: 200 - total flux cleaned = -0.018052 Jy ! Total flux subtracted in 200 components = -0.018052 Jy ! Clean residual min=-0.015734 max=0.017388 Jy/beam ! Clean residual mean=-0.000019 rms=0.003099 Jy/beam ! Combined flux in latest and established models = 2.32823 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 130 components and 2.32823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.347272Jy sigma=5.073234 ! Fit after self-cal, rms=0.347180Jy sigma=5.071605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948457 Jy ! Component: 100 - total flux cleaned = 0.0131027 Jy ! Component: 150 - total flux cleaned = 0.013891 Jy ! Component: 200 - total flux cleaned = 0.0142079 Jy ! Total flux subtracted in 200 components = 0.0142079 Jy ! Clean residual min=-0.012832 max=0.010860 Jy/beam ! Clean residual mean=-0.000014 rms=0.002642 Jy/beam ! Combined flux in latest and established models = 2.34244 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 150 components and 2.34244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.345720Jy sigma=5.055950 ! Fit after self-cal, rms=0.345601Jy sigma=5.054748 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.345601Jy sigma=5.054748 ! Fit after self-cal, rms=0.343448Jy sigma=5.046075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8673 mas, bmaj=2.001 mas, bpa=21.98 degrees ! Estimated noise=0.662871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00681751 Jy ! Component: 100 - total flux cleaned = -0.00582509 Jy ! Component: 150 - total flux cleaned = -0.00489847 Jy ! Component: 200 - total flux cleaned = -0.00515191 Jy ! Total flux subtracted in 200 components = -0.00515191 Jy ! Clean residual min=-0.011315 max=0.010200 Jy/beam ! Clean residual mean=-0.000013 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 2.33729 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 156 components and 2.33729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.341717Jy sigma=5.046631 ! Fit after self-cal, rms=0.341665Jy sigma=5.046044 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789281 Jy ! Component: 100 - total flux cleaned = 0.00147474 Jy ! Component: 150 - total flux cleaned = 0.00168824 Jy ! Component: 200 - total flux cleaned = 0.00168847 Jy ! Total flux subtracted in 200 components = 0.00168847 Jy ! Clean residual min=-0.010650 max=0.010237 Jy/beam ! Clean residual mean=-0.000012 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 2.33898 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 165 components and 2.33898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.341281Jy sigma=5.043062 ! Fit after self-cal, rms=0.341254Jy sigma=5.042832 ! Inverting map ! Added new window around map position (-5.8, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467235 Jy ! Component: 100 - total flux cleaned = 0.00584854 Jy ! Component: 150 - total flux cleaned = 0.00540864 Jy ! Component: 200 - total flux cleaned = 0.00484683 Jy ! Total flux subtracted in 200 components = 0.00484683 Jy ! Clean residual min=-0.010487 max=0.009062 Jy/beam ! Clean residual mean=-0.000011 rms=0.002085 Jy/beam ! Combined flux in latest and established models = 2.34382 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 182 components and 2.34382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.340712Jy sigma=5.035132 ! Fit after self-cal, rms=0.340662Jy sigma=5.034442 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.340662Jy sigma=5.034442 ! Fit after self-cal, rms=0.338200Jy sigma=5.024909 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.828 mas, bmaj=2.648 mas, bpa=14.17 degrees ! Estimated noise=0.955575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0114047 Jy ! Component: 100 - total flux cleaned = -0.00937156 Jy ! Component: 150 - total flux cleaned = -0.00800437 Jy ! Component: 200 - total flux cleaned = -0.00730324 Jy ! Total flux subtracted in 200 components = -0.00730324 Jy ! Clean residual min=-0.011735 max=0.013919 Jy/beam ! Clean residual mean=-0.000023 rms=0.003291 Jy/beam ! Combined flux in latest and established models = 2.33652 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 200 components and 2.33652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.336576Jy sigma=5.033470 ! Fit after self-cal, rms=0.336553Jy sigma=5.032944 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750144 Jy ! Component: 100 - total flux cleaned = 0.00116413 Jy ! Component: 150 - total flux cleaned = 0.00134828 Jy ! Component: 200 - total flux cleaned = 0.00151852 Jy ! Total flux subtracted in 200 components = 0.00151852 Jy ! Clean residual min=-0.011351 max=0.013685 Jy/beam ! Clean residual mean=-0.000022 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 2.33804 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 205 components and 2.33804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.336326Jy sigma=5.034212 ! Fit after self-cal, rms=0.336326Jy sigma=5.033936 ! Inverting map ! Added new window around map position (3.6, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141934 Jy ! Component: 100 - total flux cleaned = 0.0210651 Jy ! Component: 150 - total flux cleaned = 0.025922 Jy ! Component: 200 - total flux cleaned = 0.0301111 Jy ! Total flux subtracted in 200 components = 0.0301111 Jy ! Clean residual min=-0.008818 max=0.008627 Jy/beam ! Clean residual mean=-0.000013 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 2.36815 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 249 components and 2.36815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.335609Jy sigma=5.031141 ! Fit after self-cal, rms=0.335575Jy sigma=5.030351 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8671 mas, bmaj=2.001 mas, bpa=21.99 degrees ! Estimated noise=0.656468 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8671 x 2.001 at 21.99 degrees (North through East) ! Clean map min=-0.012243 max=1.4292 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.335575Jy sigma=5.030351 ! Fit after self-cal, rms=0.319849Jy sigma=4.681600 ! Inverting map and beam ! Estimated beam: bmin=0.8667 mas, bmaj=2 mas, bpa=21.97 degrees ! Estimated noise=0.623942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0548481 Jy ! Component: 100 - total flux cleaned = -0.062881 Jy ! Component: 150 - total flux cleaned = -0.0669106 Jy ! Component: 200 - total flux cleaned = -0.066521 Jy ! Total flux subtracted in 200 components = -0.066521 Jy ! Clean residual min=-0.013086 max=0.012488 Jy/beam ! Clean residual mean=-0.000006 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 2.30163 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 263 components and 2.30163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.305529Jy sigma=4.549336 ! Fit after self-cal, rms=0.305478Jy sigma=4.547981 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207088 Jy ! Component: 100 - total flux cleaned = 0.0046174 Jy ! Component: 150 - total flux cleaned = 0.00494121 Jy ! Component: 200 - total flux cleaned = 0.00524033 Jy ! Total flux subtracted in 200 components = 0.00524033 Jy ! Clean residual min=-0.011192 max=0.010711 Jy/beam ! Clean residual mean=-0.000005 rms=0.002301 Jy/beam ! Combined flux in latest and established models = 2.30687 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 282 components and 2.30687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.304260Jy sigma=4.540666 ! Fit after self-cal, rms=0.304255Jy sigma=4.540422 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.304255Jy sigma=4.540422 ! Fit after self-cal, rms=0.296458Jy sigma=4.355305 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7198 mas, bmaj=1.89 mas, bpa=20.25 degrees ! Estimated noise=0.77093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.964946 Jy ! Component: 100 - total flux cleaned = 1.27618 Jy ! Component: 150 - total flux cleaned = 1.46256 Jy ! Component: 200 - total flux cleaned = 1.58307 Jy ! Total flux subtracted in 200 components = 1.58307 Jy ! Clean residual min=-0.034322 max=0.064877 Jy/beam ! Clean residual mean=-0.000082 rms=0.010272 Jy/beam ! Combined flux in latest and established models = 1.58307 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.58307 Jy ! Inverting map and beam ! Estimated beam: bmin=0.866 mas, bmaj=1.999 mas, bpa=21.91 degrees ! Estimated noise=0.598631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118507 Jy ! Component: 100 - total flux cleaned = 0.19937 Jy ! Component: 150 - total flux cleaned = 0.260983 Jy ! Component: 200 - total flux cleaned = 0.311708 Jy ! Total flux subtracted in 200 components = 0.311708 Jy ! Clean residual min=-0.026649 max=0.041568 Jy/beam ! Clean residual mean=-0.000105 rms=0.007178 Jy/beam ! Combined flux in latest and established models = 1.89478 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 1.89478 Jy ! Inverting map ! Added new window around map position (17, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451489 Jy ! Component: 100 - total flux cleaned = 0.0821067 Jy ! Component: 150 - total flux cleaned = 0.110132 Jy ! Component: 200 - total flux cleaned = 0.134452 Jy ! Total flux subtracted in 200 components = 0.134452 Jy ! Clean residual min=-0.020150 max=0.023069 Jy/beam ! Clean residual mean=-0.000063 rms=0.004858 Jy/beam ! Combined flux in latest and established models = 2.02923 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 91 components and 2.02923 Jy ! Inverting map ! Added new window around map position (-1.8, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248416 Jy ! Component: 100 - total flux cleaned = 0.0439051 Jy ! Component: 150 - total flux cleaned = 0.0615357 Jy ! Component: 200 - total flux cleaned = 0.0766919 Jy ! Total flux subtracted in 200 components = 0.0766919 Jy ! Clean residual min=-0.016441 max=0.015639 Jy/beam ! Clean residual mean=-0.000038 rms=0.003740 Jy/beam ! Combined flux in latest and established models = 2.10592 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 121 components and 2.10592 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.822 mas, bmaj=2.648 mas, bpa=14.16 degrees ! Estimated noise=0.87543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316252 Jy ! Component: 100 - total flux cleaned = 0.0544061 Jy ! Component: 150 - total flux cleaned = 0.0723033 Jy ! Component: 200 - total flux cleaned = 0.086134 Jy ! Total flux subtracted in 200 components = 0.086134 Jy ! Clean residual min=-0.018181 max=0.016238 Jy/beam ! Clean residual mean=-0.000035 rms=0.004436 Jy/beam ! Combined flux in latest and established models = 2.19206 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010992 Jy ! Component: 100 - total flux cleaned = 0.0203086 Jy ! Component: 150 - total flux cleaned = 0.0270655 Jy ! Component: 200 - total flux cleaned = 0.0316905 Jy ! Total flux subtracted in 200 components = 0.0316905 Jy ! Clean residual min=-0.014751 max=0.012350 Jy/beam ! Clean residual mean=-0.000017 rms=0.003687 Jy/beam ! Combined flux in latest and established models = 2.22375 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 190 components and 2.22375 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.866 mas, bmaj=1.999 mas, bpa=21.91 degrees ! Estimated noise=0.598631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507432 Jy ! Component: 100 - total flux cleaned = 0.00183199 Jy ! Component: 150 - total flux cleaned = 0.00404772 Jy ! Component: 200 - total flux cleaned = 0.00668419 Jy ! Total flux subtracted in 200 components = 0.00668419 Jy ! Clean residual min=-0.012691 max=0.009096 Jy/beam ! Clean residual mean=-0.000008 rms=0.002398 Jy/beam ! Combined flux in latest and established models = 2.23043 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 227 components and 2.23043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.283018Jy sigma=4.280834 ! Fit after self-cal, rms=0.282941Jy sigma=4.275976 wmodel /scr/pima/bg219h_uvs/J0237+2848_X_map.mod ! Writing 227 model components to file: /scr/pima/bg219h_uvs/J0237+2848_X_map.mod wobs /scr/pima/bg219h_uvs/J0237+2848_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J0237+2848_X_uvs.fits wwins /scr/pima/bg219h_uvs/J0237+2848_X_map.win ! wwins: Wrote 8 windows to /scr/pima/bg219h_uvs/J0237+2848_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00530549 Jy ! Component: 100 - total flux cleaned = -0.00951907 Jy ! Component: 150 - total flux cleaned = -0.0121972 Jy ! Component: 200 - total flux cleaned = -0.0140753 Jy ! Component: 250 - total flux cleaned = -0.0157143 Jy ! Component: 300 - total flux cleaned = -0.0171423 Jy ! Component: 350 - total flux cleaned = -0.0183788 Jy ! Component: 400 - total flux cleaned = -0.0199767 Jy ! Component: 450 - total flux cleaned = -0.0212699 Jy ! Component: 500 - total flux cleaned = -0.0225289 Jy ! Component: 550 - total flux cleaned = -0.0237542 Jy ! Component: 600 - total flux cleaned = -0.024824 Jy ! Component: 650 - total flux cleaned = -0.0252894 Jy ! Component: 700 - total flux cleaned = -0.0263108 Jy ! Component: 750 - total flux cleaned = -0.0268692 Jy ! Component: 800 - total flux cleaned = -0.0277393 Jy ! Component: 850 - total flux cleaned = -0.0282731 Jy ! Component: 900 - total flux cleaned = -0.028479 Jy ! Component: 950 - total flux cleaned = -0.028991 Jy ! Component: 1000 - total flux cleaned = -0.0291928 Jy ! Component: 1050 - total flux cleaned = -0.029592 Jy ! Component: 1100 - total flux cleaned = -0.0301706 Jy ! Component: 1150 - total flux cleaned = -0.0303592 Jy ! Component: 1200 - total flux cleaned = -0.0307309 Jy ! Component: 1250 - total flux cleaned = -0.0308229 Jy ! Component: 1300 - total flux cleaned = -0.0314489 Jy ! Component: 1350 - total flux cleaned = -0.0317973 Jy ! Component: 1400 - total flux cleaned = -0.0321399 Jy ! Component: 1450 - total flux cleaned = -0.0321407 Jy ! Component: 1500 - total flux cleaned = -0.0324725 Jy ! Component: 1550 - total flux cleaned = -0.0325551 Jy ! Component: 1600 - total flux cleaned = -0.0328754 Jy ! Component: 1650 - total flux cleaned = -0.032876 Jy ! Component: 1700 - total flux cleaned = -0.0332653 Jy ! Component: 1750 - total flux cleaned = -0.0336469 Jy ! Component: 1800 - total flux cleaned = -0.0339471 Jy ! Component: 1850 - total flux cleaned = -0.0340208 Jy ! Component: 1900 - total flux cleaned = -0.0344609 Jy ! Component: 1950 - total flux cleaned = -0.0350389 Jy ! Component: 2000 - total flux cleaned = -0.0352523 Jy ! Component: 2050 - total flux cleaned = -0.0355335 Jy ! Component: 2100 - total flux cleaned = -0.0356727 Jy ! Component: 2150 - total flux cleaned = -0.0361518 Jy ! Component: 2200 - total flux cleaned = -0.0365559 Jy ! Component: 2250 - total flux cleaned = -0.0365565 Jy ! Component: 2300 - total flux cleaned = -0.0370809 Jy ! Component: 2350 - total flux cleaned = -0.0371461 Jy ! Component: 2400 - total flux cleaned = -0.0374019 Jy ! Component: 2450 - total flux cleaned = -0.0374005 Jy ! Component: 2500 - total flux cleaned = -0.0374008 Jy ! Component: 2550 - total flux cleaned = -0.0377086 Jy ! Component: 2600 - total flux cleaned = -0.0375879 Jy ! Component: 2650 - total flux cleaned = -0.0377679 Jy ! Component: 2700 - total flux cleaned = -0.0378271 Jy ! Component: 2750 - total flux cleaned = -0.0380037 Jy ! Component: 2800 - total flux cleaned = -0.0383502 Jy ! Component: 2850 - total flux cleaned = -0.0383501 Jy ! Component: 2900 - total flux cleaned = -0.038408 Jy ! Component: 2950 - total flux cleaned = -0.0384092 Jy ! Component: 3000 - total flux cleaned = -0.0387401 Jy ! Component: 3050 - total flux cleaned = -0.0389023 Jy ! Component: 3100 - total flux cleaned = -0.0387411 Jy ! Component: 3150 - total flux cleaned = -0.0389009 Jy ! Component: 3200 - total flux cleaned = -0.0389546 Jy ! Component: 3250 - total flux cleaned = -0.0392661 Jy ! Component: 3300 - total flux cleaned = -0.0392138 Jy ! Component: 3350 - total flux cleaned = -0.0394676 Jy ! Component: 3400 - total flux cleaned = -0.039216 Jy ! Component: 3450 - total flux cleaned = -0.0394158 Jy ! Component: 3500 - total flux cleaned = -0.0394655 Jy ! Component: 3550 - total flux cleaned = -0.0396612 Jy ! Component: 3600 - total flux cleaned = -0.0397091 Jy ! Component: 3650 - total flux cleaned = -0.0399959 Jy ! Component: 3700 - total flux cleaned = -0.0400899 Jy ! Component: 3750 - total flux cleaned = -0.0401832 Jy ! Component: 3800 - total flux cleaned = -0.0403222 Jy ! Component: 3850 - total flux cleaned = -0.0404131 Jy ! Component: 3900 - total flux cleaned = -0.0405043 Jy ! Component: 3950 - total flux cleaned = -0.0405949 Jy ! Component: 4000 - total flux cleaned = -0.0407286 Jy ! Component: 4050 - total flux cleaned = -0.0408173 Jy ! Total flux subtracted in 4096 components = -0.0409042 Jy ! Clean residual min=-0.002342 max=0.002829 Jy/beam ! Clean residual mean=-0.000002 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 2.18953 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 550 components and 2.18953 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J0237+2848_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.866 x 1.999 at 21.91 degrees (North through East) ! Clean map min=-0.013728 max=1.2976 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0237+2848_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.29764 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00079755 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.184384 0.184384 0.368768 0.737536 1.47507 2.95015 5.90029 11.8006 23.6012 47.2023 94.4046 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.297 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1627.04 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0237+2848_X_uvs.log closed on Thu Apr 7 11:58:22 2016