! Started logfile: /scr/pima/bg219h_uvs/J0210-0737_X_dfm.log on Thu May 19 22:03:04 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /scr/pima/bg219h_uvs/J0210-0737_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0210-0737_X_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.933796 visibilities/baseline/integration-bin. ! Found source: J0210-0737 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 24204 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0210-0737_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002988Jy sigma=23.785727 ! Fit after self-cal, rms=0.941926Jy sigma=22.310491 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7776 mas, bmaj=2.035 mas, bpa=2.077 degrees ! Estimated noise=0.348759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420791 Jy ! Component: 100 - total flux cleaned = 0.0567662 Jy ! Total flux subtracted in 100 components = 0.0567662 Jy ! Clean residual min=-0.003332 max=0.006857 Jy/beam ! Clean residual mean=-0.000003 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.0567662 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0567662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066146Jy sigma=1.427988 ! Fit after self-cal, rms=0.065134Jy sigma=1.402735 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950733 Jy ! Component: 100 - total flux cleaned = 0.0144282 Jy ! Total flux subtracted in 100 components = 0.0144282 Jy ! Clean residual min=-0.002832 max=0.002999 Jy/beam ! Clean residual mean=-0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0711944 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.0711944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063541Jy sigma=1.360194 ! Fit after self-cal, rms=0.063475Jy sigma=1.358872 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9983 mas, bmaj=2.339 mas, bpa=1.451 degrees ! Estimated noise=0.202453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362411 Jy ! Component: 100 - total flux cleaned = 0.00517579 Jy ! Component: 150 - total flux cleaned = 0.00576224 Jy ! Component: 200 - total flux cleaned = 0.00585281 Jy ! Total flux subtracted in 200 components = 0.00585281 Jy ! Clean residual min=-0.002175 max=0.002899 Jy/beam ! Clean residual mean=0.000003 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0770472 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.0770472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063281Jy sigma=1.354452 ! Fit after self-cal, rms=0.063270Jy sigma=1.354248 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9983 x 2.339 at 1.451 degrees (North through East) ! Clean map min=-0.0020852 max=0.059886 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 1.09 KP 0.99 ! LA 0.91 NL 1.05 OV 1.09 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 1.00 KP 1.06 ! MK 0.95 NL 1.01 OV 1.03 PT 1.04 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.10 HN 0.86 KP 0.98 ! MK 0.92 NL 0.98 OV 1.06 PT 0.99 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 HN 1.09 KP 1.02 ! LA 0.86 NL 1.08 OV 1.02 PT 0.99 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 1.07 KP 1.05 ! LA 0.87 NL 1.13 OV 1.03 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.89 KP 1.04 ! MK 0.96 NL 0.99 OV 0.95 PT 1.01 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 HN 1.02 KP 0.97 ! LA 0.93 NL 1.07 OV 1.01 PT 0.95 ! SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 0.98 KP 1.13 ! LA 0.91 NL 1.09 OV 1.12 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.92 KP 1.12 ! MK 0.90 NL 1.01 OV 1.02 PT 0.97 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.92 HN 1.05 KP 1.03 ! LA 0.96 NL 1.11 OV 1.06 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.84 KP 1.08 ! MK 0.93 NL 1.08 OV 1.05 PT 0.99 ! SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.06 HN 0.98 KP 0.98 ! LA 0.89 NL 1.07 OV 1.01 PT 1.02 ! SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.88 KP 0.99 ! MK 0.92 NL 0.95 OV 1.04 PT 1.16 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 0.96 KP 0.99 ! LA 0.90 NL 1.07 OV 1.00 PT 0.98 ! SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.93 HN 0.99 KP 1.02 ! LA 0.96 NL 1.11 OV 1.02 PT 0.91 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.063270Jy sigma=1.354248 ! Fit after self-cal, rms=0.062259Jy sigma=1.350039 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9932 mas, bmaj=2.331 mas, bpa=1.415 degrees ! Estimated noise=0.201217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271648 Jy ! Component: 100 - total flux cleaned = 0.00430187 Jy ! Component: 150 - total flux cleaned = 0.00535578 Jy ! Component: 200 - total flux cleaned = 0.00604874 Jy ! Total flux subtracted in 200 components = 0.00604874 Jy ! Clean residual min=-0.001420 max=0.001914 Jy/beam ! Clean residual mean=0.000000 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0830959 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 46 components and 0.0830959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062135Jy sigma=1.346734 ! Fit after self-cal, rms=0.062117Jy sigma=1.345959 ! Inverting map ! Added new window around map position (2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179376 Jy ! Component: 100 - total flux cleaned = 0.00291684 Jy ! Component: 150 - total flux cleaned = 0.00367641 Jy ! Component: 200 - total flux cleaned = 0.00416228 Jy ! Total flux subtracted in 200 components = 0.00416228 Jy ! Clean residual min=-0.001133 max=0.001135 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.0872582 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 66 components and 0.0872582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062051Jy sigma=1.344327 ! Fit after self-cal, rms=0.062033Jy sigma=1.344136 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062033Jy sigma=1.344136 ! Fit after self-cal, rms=0.061834Jy sigma=1.343108 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9948 mas, bmaj=2.335 mas, bpa=1.387 degrees ! Estimated noise=0.201089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100615 Jy ! Component: 100 - total flux cleaned = 0.00163824 Jy ! Component: 150 - total flux cleaned = 0.00196702 Jy ! Component: 200 - total flux cleaned = 0.00214645 Jy ! Total flux subtracted in 200 components = 0.00214645 Jy ! Clean residual min=-0.001100 max=0.001095 Jy/beam ! Clean residual mean=0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0894047 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 0.0894047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061808Jy sigma=1.342510 ! Fit after self-cal, rms=0.061786Jy sigma=1.342152 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413727 Jy ! Component: 100 - total flux cleaned = 0.000518852 Jy ! Component: 150 - total flux cleaned = 0.000595492 Jy ! Component: 200 - total flux cleaned = 0.000647817 Jy ! Total flux subtracted in 200 components = 0.000647817 Jy ! Clean residual min=-0.001075 max=0.001082 Jy/beam ! Clean residual mean=0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0900525 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.0900525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061773Jy sigma=1.341892 ! Fit after self-cal, rms=0.061767Jy sigma=1.341876 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061767Jy sigma=1.341876 ! Fit after self-cal, rms=0.061892Jy sigma=1.341647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9962 mas, bmaj=2.336 mas, bpa=1.39 degrees ! Estimated noise=0.201378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479899 Jy ! Component: 100 - total flux cleaned = 0.000709659 Jy ! Component: 150 - total flux cleaned = 0.000741194 Jy ! Component: 200 - total flux cleaned = 0.000799564 Jy ! Total flux subtracted in 200 components = 0.000799564 Jy ! Clean residual min=-0.001092 max=0.001078 Jy/beam ! Clean residual mean=0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0908521 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 0.0908521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061882Jy sigma=1.341461 ! Fit after self-cal, rms=0.061880Jy sigma=1.341419 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176662 Jy ! Component: 100 - total flux cleaned = 0.000190345 Jy ! Component: 150 - total flux cleaned = 0.000230242 Jy ! Component: 200 - total flux cleaned = 0.000243176 Jy ! Total flux subtracted in 200 components = 0.000243176 Jy ! Clean residual min=-0.001066 max=0.001085 Jy/beam ! Clean residual mean=0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0910952 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 102 components and 0.0910953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061874Jy sigma=1.341303 ! Fit after self-cal, rms=0.061870Jy sigma=1.341297 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061870Jy sigma=1.341297 ! Fit after self-cal, rms=0.061918Jy sigma=1.341277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.214 mas, bmaj=3.589 mas, bpa=-0.1839 degrees ! Estimated noise=0.242871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371076 Jy ! Component: 100 - total flux cleaned = 0.000511715 Jy ! Component: 150 - total flux cleaned = 0.000575867 Jy ! Component: 200 - total flux cleaned = 0.000611804 Jy ! Total flux subtracted in 200 components = 0.000611804 Jy ! Clean residual min=-0.001090 max=0.000971 Jy/beam ! Clean residual mean=0.000002 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0917071 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.0917071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061916Jy sigma=1.341224 ! Fit after self-cal, rms=0.061916Jy sigma=1.341215 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.79573e-05 Jy ! Component: 100 - total flux cleaned = 9.57042e-05 Jy ! Component: 150 - total flux cleaned = 0.000102005 Jy ! Component: 200 - total flux cleaned = 0.000101921 Jy ! Total flux subtracted in 200 components = 0.000101921 Jy ! Clean residual min=-0.001065 max=0.000966 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.091809 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 0.091809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061915Jy sigma=1.341193 ! Fit after self-cal, rms=0.061913Jy sigma=1.341167 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9971 mas, bmaj=2.338 mas, bpa=1.364 degrees ! Estimated noise=0.201534 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9971 x 2.338 at 1.364 degrees (North through East) ! Clean map min=-0.0010249 max=0.059297 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7782 mas, bmaj=2.034 mas, bpa=1.974 degrees ! Estimated noise=0.347044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430678 Jy ! Component: 100 - total flux cleaned = 0.0595681 Jy ! Component: 150 - total flux cleaned = 0.068061 Jy ! Component: 200 - total flux cleaned = 0.0726701 Jy ! Total flux subtracted in 200 components = 0.0726701 Jy ! Clean residual min=-0.002829 max=0.002760 Jy/beam ! Clean residual mean=-0.000002 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0726701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0726701 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9971 mas, bmaj=2.338 mas, bpa=1.364 degrees ! Estimated noise=0.201534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401334 Jy ! Component: 100 - total flux cleaned = 0.00693057 Jy ! Component: 150 - total flux cleaned = 0.00923244 Jy ! Component: 200 - total flux cleaned = 0.0111068 Jy ! Total flux subtracted in 200 components = 0.0111068 Jy ! Clean residual min=-0.001397 max=0.001574 Jy/beam ! Clean residual mean=0.000001 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0837768 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.0837769 Jy ! Inverting map ! Added new window around map position (-6.8, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167894 Jy ! Component: 100 - total flux cleaned = 0.00298313 Jy ! Component: 150 - total flux cleaned = 0.00409039 Jy ! Component: 200 - total flux cleaned = 0.00496389 Jy ! Total flux subtracted in 200 components = 0.00496389 Jy ! Clean residual min=-0.001219 max=0.001193 Jy/beam ! Clean residual mean=0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0887408 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 66 components and 0.0887407 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.214 mas, bmaj=3.589 mas, bpa=-0.1839 degrees ! Estimated noise=0.242871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103394 Jy ! Component: 100 - total flux cleaned = 0.00175861 Jy ! Component: 150 - total flux cleaned = 0.0023076 Jy ! Component: 200 - total flux cleaned = 0.00253752 Jy ! Total flux subtracted in 200 components = 0.00253752 Jy ! Clean residual min=-0.000960 max=0.001029 Jy/beam ! Clean residual mean=0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.0912783 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165572 Jy ! Component: 100 - total flux cleaned = 0.000244759 Jy ! Component: 150 - total flux cleaned = 0.000328874 Jy ! Component: 200 - total flux cleaned = 0.00039494 Jy ! Total flux subtracted in 200 components = 0.00039494 Jy ! Clean residual min=-0.000985 max=0.000983 Jy/beam ! Clean residual mean=0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0916732 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 118 components and 0.0916732 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9971 mas, bmaj=2.338 mas, bpa=1.364 degrees ! Estimated noise=0.201534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.08631e-06 Jy ! Component: 100 - total flux cleaned = 0.00012352 Jy ! Component: 150 - total flux cleaned = 0.000217966 Jy ! Component: 200 - total flux cleaned = 0.000235695 Jy ! Total flux subtracted in 200 components = 0.000235695 Jy ! Clean residual min=-0.001122 max=0.001082 Jy/beam ! Clean residual mean=0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0919089 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.0919089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061911Jy sigma=1.341104 ! Fit after self-cal, rms=0.061918Jy sigma=1.341031 wmodel /J0210-0737_X_map.mod ! wmodel: Unable to open new model file: /J0210-0737_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J0210-0737_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9971 x 2.338 at 1.364 degrees (North through East) ! Clean map min=-0.0010324 max=0.059207 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0210-0737_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0592067 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024845 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2589 1.2589 2.51779 5.03559 10.0712 20.1423 40.2847 80.5694 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.059 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 238.303 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0210-0737_X_dfm.log closed on Thu May 19 22:03:08 2016