! Started logfile: /scr/pima/bg219h_uvs/J0206-2212_X_dfm.log on Thu May 19 22:02:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0206-2212_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0206-2212_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.862698 visibilities/baseline/integration-bin.
! Found source: J0206-2212
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13044 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0206-2212_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010151Jy  sigma=21.628598
! Fit after  self-cal, rms=0.893891Jy  sigma=19.108838
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.629 mas, bmaj=1.696 mas, bpa=-4.253 degrees
! Estimated noise=0.558624 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0782311 Jy
! Component: 100  -  total flux cleaned = 0.100735 Jy
! Total flux subtracted in 100 components = 0.100735 Jy
! Clean residual min=-0.005311 max=0.009798 Jy/beam
! Clean residual mean=-0.000017 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.100735 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.100735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077330Jy  sigma=1.485785
! Fit after  self-cal, rms=0.077068Jy  sigma=1.480718
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119273 Jy
! Component: 100  -  total flux cleaned = 0.0189486 Jy
! Total flux subtracted in 100 components = 0.0189486 Jy
! Clean residual min=-0.004070 max=0.008767 Jy/beam
! Clean residual mean=-0.000007 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.119683 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.119683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074489Jy  sigma=1.413725
! Fit after  self-cal, rms=0.074443Jy  sigma=1.412655
! Inverting map 
! Added new window around map position (1.2, -7.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00787181 Jy
! Component: 100  -  total flux cleaned = 0.0122237 Jy
! Total flux subtracted in 100 components = 0.0122237 Jy
! Clean residual min=-0.003454 max=0.003732 Jy/beam
! Clean residual mean=-0.000005 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.131907 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.131907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073559Jy  sigma=1.391266
! Fit after  self-cal, rms=0.073460Jy  sigma=1.389212
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7905 mas, bmaj=2.104 mas, bpa=-4.6 degrees
! Estimated noise=0.331929 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494967 Jy
! Component: 100  -  total flux cleaned = 0.00794529 Jy
! Component: 150  -  total flux cleaned = 0.00997383 Jy
! Component: 200  -  total flux cleaned = 0.0113954 Jy
! Total flux subtracted in 200 components = 0.0113954 Jy
! Clean residual min=-0.002647 max=0.002369 Jy/beam
! Clean residual mean=-0.000009 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.143302 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 43 components and 0.143302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073106Jy  sigma=1.380159
! Fit after  self-cal, rms=0.073086Jy  sigma=1.379659
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7905 x 2.104 at -4.6 degrees (North through East)
! Clean map  min=-0.0025664  max=0.10258 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.96     
!   LA        0.94     MK        1.04     NL        0.98     OV        1.03     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.03     KP        0.96     
!   LA        0.98     MK        1.05     NL        1.04     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.95     KP        0.97     
!   LA        0.98     MK        1.15     NL        0.97     OV        1.02     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.08     KP        1.01     
!   LA        1.02     MK        1.04     NL        0.99     OV        1.02     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.98     KP        0.95     
!   LA        0.97     MK        1.11     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.04     KP        0.98     
!   LA        1.04     MK        1.06     NL        0.96     OV        1.03     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.92     KP        0.97     
!   LA        1.01     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.93     KP        0.98     
!   LA        1.03     MK        0.90     NL        1.00     OV        1.05     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.00     KP        0.98     
!   LA        1.01     MK        1.10     NL        1.00     OV        1.05     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        0.98     KP        0.96     
!   LA        1.00     MK        1.04     NL        0.99     OV        1.02     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.06     KP        0.98     
!   LA        1.01     MK        0.97     NL        1.03     OV        1.03     
!   PT        1.01     SC        1.11     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.98     KP        0.95     
!   LA        1.01     MK        0.97     NL        0.98     OV        1.08     
!   PT        0.95     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.073086Jy  sigma=1.379659
! Fit after  self-cal, rms=0.073204Jy  sigma=1.374108
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7983 mas, bmaj=2.121 mas, bpa=-4.481 degrees
! Estimated noise=0.332617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000654965 Jy
! Component: 100  -  total flux cleaned = 0.000596922 Jy
! Component: 150  -  total flux cleaned = 0.000595437 Jy
! Component: 200  -  total flux cleaned = 0.000594192 Jy
! Total flux subtracted in 200 components = 0.000594192 Jy
! Clean residual min=-0.002151 max=0.002177 Jy/beam
! Clean residual mean=-0.000006 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.143896 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 0.143896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073169Jy  sigma=1.373583
! Fit after  self-cal, rms=0.073171Jy  sigma=1.373361
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073171Jy  sigma=1.373361
! Fit after  self-cal, rms=0.073328Jy  sigma=1.368641
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8015 mas, bmaj=2.122 mas, bpa=-4.491 degrees
! Estimated noise=0.333468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109123 Jy
! Component: 100  -  total flux cleaned = 0.000178653 Jy
! Component: 150  -  total flux cleaned = 0.000142131 Jy
! Component: 200  -  total flux cleaned = 0.000142415 Jy
! Total flux subtracted in 200 components = 0.000142415 Jy
! Clean residual min=-0.001964 max=0.002112 Jy/beam
! Clean residual mean=-0.000006 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.144039 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.144039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073312Jy  sigma=1.368394
! Fit after  self-cal, rms=0.073312Jy  sigma=1.368290
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.6, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177122 Jy
! Component: 100  -  total flux cleaned = 0.00251044 Jy
! Component: 150  -  total flux cleaned = 0.00275834 Jy
! Component: 200  -  total flux cleaned = 0.00285531 Jy
! Total flux subtracted in 200 components = 0.00285531 Jy
! Clean residual min=-0.001926 max=0.002186 Jy/beam
! Clean residual mean=-0.000005 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.146894 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 71 components and 0.146894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073264Jy  sigma=1.367268
! Fit after  self-cal, rms=0.073258Jy  sigma=1.367157
! Inverting map 
! Added new window around map position (3.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180353 Jy
! Component: 100  -  total flux cleaned = 0.00242968 Jy
! Component: 150  -  total flux cleaned = 0.002698 Jy
! Component: 200  -  total flux cleaned = 0.00277837 Jy
! Total flux subtracted in 200 components = 0.00277837 Jy
! Clean residual min=-0.001834 max=0.001833 Jy/beam
! Clean residual mean=-0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.149673 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 0.149673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073207Jy  sigma=1.366011
! Fit after  self-cal, rms=0.073201Jy  sigma=1.365937
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073201Jy  sigma=1.365937
! Fit after  self-cal, rms=0.073312Jy  sigma=1.365177
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8024 mas, bmaj=2.122 mas, bpa=-4.502 degrees
! Estimated noise=0.333294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000637588 Jy
! Component: 100  -  total flux cleaned = 0.000819608 Jy
! Component: 150  -  total flux cleaned = 0.000887412 Jy
! Component: 200  -  total flux cleaned = 0.000908392 Jy
! Total flux subtracted in 200 components = 0.000908392 Jy
! Clean residual min=-0.001783 max=0.001837 Jy/beam
! Clean residual mean=-0.000004 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.150581 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 95 components and 0.150581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073294Jy  sigma=1.364854
! Fit after  self-cal, rms=0.073296Jy  sigma=1.364816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31.8, -48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161873 Jy
! Component: 100  -  total flux cleaned = 0.00175378 Jy
! Component: 150  -  total flux cleaned = 0.00177948 Jy
! Component: 200  -  total flux cleaned = 0.00180462 Jy
! Total flux subtracted in 200 components = 0.00180462 Jy
! Clean residual min=-0.001767 max=0.001675 Jy/beam
! Clean residual mean=-0.000003 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.152386 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.152386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073251Jy  sigma=1.363924
! Fit after  self-cal, rms=0.073248Jy  sigma=1.363859
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073248Jy  sigma=1.363859
! Fit after  self-cal, rms=0.073154Jy  sigma=1.363805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=4.937 mas, bpa=-0.3578 degrees
! Estimated noise=0.426587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000651666 Jy
! Component: 100  -  total flux cleaned = 0.000823755 Jy
! Component: 150  -  total flux cleaned = 0.000912271 Jy
! Component: 200  -  total flux cleaned = 0.00101573 Jy
! Total flux subtracted in 200 components = 0.00101573 Jy
! Clean residual min=-0.002035 max=0.001544 Jy/beam
! Clean residual mean=-0.000007 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.153401 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 124 components and 0.153401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073150Jy  sigma=1.363693
! Fit after  self-cal, rms=0.073149Jy  sigma=1.363675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177188 Jy
! Component: 100  -  total flux cleaned = 0.000216114 Jy
! Component: 150  -  total flux cleaned = 0.000251773 Jy
! Component: 200  -  total flux cleaned = 0.000286231 Jy
! Total flux subtracted in 200 components = 0.000286231 Jy
! Clean residual min=-0.001992 max=0.001503 Jy/beam
! Clean residual mean=-0.000007 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.153688 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 126 components and 0.153688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073149Jy  sigma=1.363664
! Fit after  self-cal, rms=0.073149Jy  sigma=1.363653
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.803 mas, bmaj=2.122 mas, bpa=-4.495 degrees
! Estimated noise=0.332883 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.803 x 2.122 at -4.495 degrees (North through East)
! Clean map  min=-0.0015241  max=0.10222 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6365 mas, bmaj=1.7 mas, bpa=-4.411 degrees
! Estimated noise=0.565225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0788423 Jy
! Component: 100  -  total flux cleaned = 0.102651 Jy
! Component: 150  -  total flux cleaned = 0.115194 Jy
! Component: 200  -  total flux cleaned = 0.123505 Jy
! Total flux subtracted in 200 components = 0.123505 Jy
! Clean residual min=-0.004023 max=0.004706 Jy/beam
! Clean residual mean=-0.000008 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.123505 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.123505 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.803 mas, bmaj=2.122 mas, bpa=-4.495 degrees
! Estimated noise=0.332883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00773701 Jy
! Component: 100  -  total flux cleaned = 0.011931 Jy
! Component: 150  -  total flux cleaned = 0.0149509 Jy
! Component: 200  -  total flux cleaned = 0.0174683 Jy
! Total flux subtracted in 200 components = 0.0174683 Jy
! Clean residual min=-0.002209 max=0.002551 Jy/beam
! Clean residual mean=-0.000009 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.140973 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 49 components and 0.140973 Jy
! Inverting map 
! Added new window around map position (1.2, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00263717 Jy
! Component: 100  -  total flux cleaned = 0.00451031 Jy
! Component: 150  -  total flux cleaned = 0.00609923 Jy
! Component: 200  -  total flux cleaned = 0.00747367 Jy
! Total flux subtracted in 200 components = 0.00747367 Jy
! Clean residual min=-0.001929 max=0.001705 Jy/beam
! Clean residual mean=-0.000005 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.148447 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 70 components and 0.148447 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=4.937 mas, bpa=-0.3578 degrees
! Estimated noise=0.426587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017131 Jy
! Component: 100  -  total flux cleaned = 0.00293138 Jy
! Component: 150  -  total flux cleaned = 0.00390304 Jy
! Component: 200  -  total flux cleaned = 0.00464585 Jy
! Total flux subtracted in 200 components = 0.00464585 Jy
! Clean residual min=-0.002217 max=0.001539 Jy/beam
! Clean residual mean=-0.000008 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.153093 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000388037 Jy
! Component: 100  -  total flux cleaned = 0.00063473 Jy
! Component: 150  -  total flux cleaned = 0.00089845 Jy
! Component: 200  -  total flux cleaned = 0.000997386 Jy
! Total flux subtracted in 200 components = 0.000997386 Jy
! Clean residual min=-0.002137 max=0.001509 Jy/beam
! Clean residual mean=-0.000007 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.15409 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 96 components and 0.15409 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.803 mas, bmaj=2.122 mas, bpa=-4.495 degrees
! Estimated noise=0.332883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230159 Jy
! Component: 100  -  total flux cleaned = 0.000298476 Jy
! Component: 150  -  total flux cleaned = 0.000359362 Jy
! Component: 200  -  total flux cleaned = 0.000388214 Jy
! Total flux subtracted in 200 components = 0.000388214 Jy
! Clean residual min=-0.001766 max=0.001758 Jy/beam
! Clean residual mean=-0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.154478 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 117 components and 0.154478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073151Jy  sigma=1.363839
! Fit after  self-cal, rms=0.073147Jy  sigma=1.363746
wmodel /J0206-2212_X_map.mod
! wmodel: Unable to open new model file: /J0206-2212_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0206-2212_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.803 x 2.122 at -4.495 degrees (North through East)
! Clean map  min=-0.0015948  max=0.1027 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0206-2212_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.102698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000394954 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.15373 1.15373 2.30746 4.61491 9.22983 18.4597 36.9193 73.8386
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  260.026 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0206-2212_X_dfm.log closed on Thu May 19 22:02:52 2016