! Started logfile: /scr/pima/bg219h_uvs/J0203+5411_X_uvs.log on Thu Apr  7 11:57:10 2016
obs /scr/pima/bg219h_uvs/J0203+5411_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0203+5411_X_uva.fits
! AN table 1: 69 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.58905 visibilities/baseline/integration-bin.
! Found source: J0203+5411
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21948 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0203+5411_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 188 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.022998Jy  sigma=25.105189
! Fit after  self-cal, rms=0.841164Jy  sigma=20.572596
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8938 mas, bmaj=1.568 mas, bpa=50.78 degrees
! Estimated noise=0.568647 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122638 Jy
! Component: 100  -  total flux cleaned = 0.162592 Jy
! Total flux subtracted in 100 components = 0.162592 Jy
! Clean residual min=-0.012243 max=0.022999 Jy/beam
! Clean residual mean=0.000221 rms=0.003323 Jy/beam
! Combined flux in latest and established models = 0.162592 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.162592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081022Jy  sigma=1.892650
! Fit after  self-cal, rms=0.080176Jy  sigma=1.879243
! Inverting map 
! Added new window around map position (-1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0261774 Jy
! Component: 100  -  total flux cleaned = 0.0425189 Jy
! Total flux subtracted in 100 components = 0.0425189 Jy
! Clean residual min=-0.009532 max=0.010047 Jy/beam
! Clean residual mean=0.000142 rms=0.002101 Jy/beam
! Combined flux in latest and established models = 0.205111 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.205111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069303Jy  sigma=1.578524
! Fit after  self-cal, rms=0.068677Jy  sigma=1.566954
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.15 mas, bmaj=1.75 mas, bpa=49.35 degrees
! Estimated noise=0.266799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173695 Jy
! Component: 100  -  total flux cleaned = 0.0280562 Jy
! Component: 150  -  total flux cleaned = 0.0355632 Jy
! Component: 200  -  total flux cleaned = 0.0412273 Jy
! Total flux subtracted in 200 components = 0.0412273 Jy
! Clean residual min=-0.006027 max=0.006197 Jy/beam
! Clean residual mean=0.000110 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.246338 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 35 components and 0.246338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063632Jy  sigma=1.428429
! Fit after  self-cal, rms=0.063257Jy  sigma=1.419763
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.15 x 1.75 at 49.35 degrees (North through East)
! Clean map  min=-0.0042997  max=0.15525 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.97     
!   LA        0.93     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        0.97     
!   LA        0.96     MK        1.03     NL        0.99     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.04     KP        0.98     
!   LA        0.95     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        0.97     
!   LA        0.96     MK        1.04     NL        1.00     OV        0.99     
!   PT        0.95     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.05     NL        1.01     OV        0.99     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.98     KP        0.97     
!   LA        0.96     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        0.98     
!   LA        0.96     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063257Jy  sigma=1.419763
! Fit after  self-cal, rms=0.062117Jy  sigma=1.407243
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=1.754 mas, bpa=49.38 degrees
! Estimated noise=0.261995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561396 Jy
! Component: 100  -  total flux cleaned = 0.0080944 Jy
! Component: 150  -  total flux cleaned = 0.00945845 Jy
! Component: 200  -  total flux cleaned = 0.0101938 Jy
! Total flux subtracted in 200 components = 0.0101938 Jy
! Clean residual min=-0.004241 max=0.003078 Jy/beam
! Clean residual mean=0.000019 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.256532 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 56 components and 0.256532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061528Jy  sigma=1.391412
! Fit after  self-cal, rms=0.061459Jy  sigma=1.389988
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061459Jy  sigma=1.389988
! Fit after  self-cal, rms=0.061380Jy  sigma=1.382064
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.157 mas, bmaj=1.747 mas, bpa=50.03 degrees
! Estimated noise=0.261829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202189 Jy
! Component: 100  -  total flux cleaned = 0.00147949 Jy
! Component: 150  -  total flux cleaned = 0.0022702 Jy
! Component: 200  -  total flux cleaned = 0.0024851 Jy
! Total flux subtracted in 200 components = 0.0024851 Jy
! Clean residual min=-0.002828 max=0.003311 Jy/beam
! Clean residual mean=0.000003 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.259017 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 78 components and 0.259017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061197Jy  sigma=1.377397
! Fit after  self-cal, rms=0.061139Jy  sigma=1.376283
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.8, -8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000948504 Jy
! Component: 100  -  total flux cleaned = 0.00142152 Jy
! Component: 150  -  total flux cleaned = 0.00227526 Jy
! Component: 200  -  total flux cleaned = 0.00301625 Jy
! Total flux subtracted in 200 components = 0.00301625 Jy
! Clean residual min=-0.001971 max=0.002114 Jy/beam
! Clean residual mean=0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.262033 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.262033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060942Jy  sigma=1.371359
! Fit after  self-cal, rms=0.060928Jy  sigma=1.371068
! Inverting map 
! Added new window around map position (-17.8, -17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000722623 Jy
! Component: 100  -  total flux cleaned = 0.000936994 Jy
! Component: 150  -  total flux cleaned = 0.00137671 Jy
! Component: 200  -  total flux cleaned = 0.00173202 Jy
! Total flux subtracted in 200 components = 0.00173202 Jy
! Clean residual min=-0.001735 max=0.001749 Jy/beam
! Clean residual mean=0.000003 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.263765 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 113 components and 0.263765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060825Jy  sigma=1.368576
! Fit after  self-cal, rms=0.060812Jy  sigma=1.368449
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060812Jy  sigma=1.368449
! Fit after  self-cal, rms=0.060855Jy  sigma=1.368177
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.157 mas, bmaj=1.746 mas, bpa=50.16 degrees
! Estimated noise=0.261688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361896 Jy
! Component: 100  -  total flux cleaned = 0.00106729 Jy
! Component: 150  -  total flux cleaned = 0.00147874 Jy
! Component: 200  -  total flux cleaned = 0.00175704 Jy
! Total flux subtracted in 200 components = 0.00175704 Jy
! Clean residual min=-0.001594 max=0.001610 Jy/beam
! Clean residual mean=0.000002 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.265522 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 123 components and 0.265522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060805Jy  sigma=1.366914
! Fit after  self-cal, rms=0.060798Jy  sigma=1.366834
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324965 Jy
! Component: 100  -  total flux cleaned = 0.000703147 Jy
! Component: 150  -  total flux cleaned = 0.000849469 Jy
! Component: 200  -  total flux cleaned = 0.000933054 Jy
! Total flux subtracted in 200 components = 0.000933054 Jy
! Clean residual min=-0.001523 max=0.001530 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.266455 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 136 components and 0.266455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060768Jy  sigma=1.366108
! Fit after  self-cal, rms=0.060762Jy  sigma=1.366052
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060762Jy  sigma=1.366052
! Fit after  self-cal, rms=0.060797Jy  sigma=1.366015
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=2.433 mas, bpa=54.12 degrees
! Estimated noise=0.303537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000879125 Jy
! Component: 100  -  total flux cleaned = 0.00129146 Jy
! Component: 150  -  total flux cleaned = 0.0014347 Jy
! Component: 200  -  total flux cleaned = 0.00151007 Jy
! Total flux subtracted in 200 components = 0.00151007 Jy
! Clean residual min=-0.001596 max=0.001616 Jy/beam
! Clean residual mean=0.000003 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.267965 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 147 components and 0.267965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060784Jy  sigma=1.365608
! Fit after  self-cal, rms=0.060778Jy  sigma=1.365539
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261114 Jy
! Component: 100  -  total flux cleaned = 0.000397572 Jy
! Component: 150  -  total flux cleaned = 0.000438616 Jy
! Component: 200  -  total flux cleaned = 0.000476188 Jy
! Total flux subtracted in 200 components = 0.000476188 Jy
! Clean residual min=-0.001559 max=0.001524 Jy/beam
! Clean residual mean=0.000003 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.268442 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 155 components and 0.268442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060771Jy  sigma=1.365340
! Fit after  self-cal, rms=0.060766Jy  sigma=1.365305
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=1.746 mas, bpa=50.2 degrees
! Estimated noise=0.261713 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.158 x 1.746 at 50.2 degrees (North through East)
! Clean map  min=-0.0015587  max=0.15249 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8997 mas, bmaj=1.563 mas, bpa=51.28 degrees
! Estimated noise=0.559396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121917 Jy
! Component: 100  -  total flux cleaned = 0.166119 Jy
! Component: 150  -  total flux cleaned = 0.190319 Jy
! Component: 200  -  total flux cleaned = 0.205193 Jy
! Total flux subtracted in 200 components = 0.205193 Jy
! Clean residual min=-0.005460 max=0.008079 Jy/beam
! Clean residual mean=0.000101 rms=0.001567 Jy/beam
! Combined flux in latest and established models = 0.205193 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.205193 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=1.746 mas, bpa=50.2 degrees
! Estimated noise=0.261713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137655 Jy
! Component: 100  -  total flux cleaned = 0.0227904 Jy
! Component: 150  -  total flux cleaned = 0.029489 Jy
! Component: 200  -  total flux cleaned = 0.0347083 Jy
! Total flux subtracted in 200 components = 0.0347083 Jy
! Clean residual min=-0.002805 max=0.003718 Jy/beam
! Clean residual mean=0.000060 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.239901 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 38 components and 0.239901 Jy
! Inverting map 
! Added new window around map position (-4.6, -22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422922 Jy
! Component: 100  -  total flux cleaned = 0.00755807 Jy
! Component: 150  -  total flux cleaned = 0.0102582 Jy
! Component: 200  -  total flux cleaned = 0.0121956 Jy
! Total flux subtracted in 200 components = 0.0121956 Jy
! Clean residual min=-0.002122 max=0.002542 Jy/beam
! Clean residual mean=0.000031 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.252097 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 72 components and 0.252097 Jy
! Inverting map 
! Added new window around map position (38.4, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202528 Jy
! Component: 100  -  total flux cleaned = 0.00356387 Jy
! Component: 150  -  total flux cleaned = 0.00492481 Jy
! Component: 200  -  total flux cleaned = 0.00614999 Jy
! Total flux subtracted in 200 components = 0.00614999 Jy
! Clean residual min=-0.001841 max=0.001905 Jy/beam
! Clean residual mean=0.000019 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.258247 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 93 components and 0.258247 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=2.433 mas, bpa=54.12 degrees
! Estimated noise=0.303537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218571 Jy
! Component: 100  -  total flux cleaned = 0.00373338 Jy
! Component: 150  -  total flux cleaned = 0.00462582 Jy
! Component: 200  -  total flux cleaned = 0.00534608 Jy
! Total flux subtracted in 200 components = 0.00534608 Jy
! Clean residual min=-0.001796 max=0.001975 Jy/beam
! Clean residual mean=0.000018 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.263593 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000469012 Jy
! Component: 100  -  total flux cleaned = 0.00085421 Jy
! Component: 150  -  total flux cleaned = 0.00117073 Jy
! Component: 200  -  total flux cleaned = 0.00146068 Jy
! Total flux subtracted in 200 components = 0.00146068 Jy
! Clean residual min=-0.001558 max=0.001686 Jy/beam
! Clean residual mean=0.000009 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.265054 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 160 components and 0.265054 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=1.746 mas, bpa=50.2 degrees
! Estimated noise=0.261713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000479146 Jy
! Component: 100  -  total flux cleaned = -0.000168317 Jy
! Component: 150  -  total flux cleaned = 0.000149355 Jy
! Component: 200  -  total flux cleaned = 0.000442437 Jy
! Total flux subtracted in 200 components = 0.000442437 Jy
! Clean residual min=-0.001356 max=0.001436 Jy/beam
! Clean residual mean=0.000005 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.265496 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 178 components and 0.265496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060759Jy  sigma=1.364962
! Fit after  self-cal, rms=0.060729Jy  sigma=1.364407
wmodel /scr/pima/bg219h_uvs/J0203+5411_X_map.mod
! Writing 178 model components to file: /scr/pima/bg219h_uvs/J0203+5411_X_map.mod
wobs /scr/pima/bg219h_uvs/J0203+5411_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0203+5411_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J0203+5411_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219h_uvs/J0203+5411_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000321008 Jy
! Component: 100  -  total flux cleaned = 0.000227022 Jy
! Component: 150  -  total flux cleaned = 0.000115289 Jy
! Component: 200  -  total flux cleaned = -7.77361e-05 Jy
! Component: 250  -  total flux cleaned = -0.000139977 Jy
! Component: 300  -  total flux cleaned = -0.000240976 Jy
! Component: 350  -  total flux cleaned = -0.000299668 Jy
! Component: 400  -  total flux cleaned = -0.000376097 Jy
! Component: 450  -  total flux cleaned = -0.000376792 Jy
! Component: 500  -  total flux cleaned = -0.000468296 Jy
! Component: 550  -  total flux cleaned = -0.000521299 Jy
! Component: 600  -  total flux cleaned = -0.000503786 Jy
! Component: 650  -  total flux cleaned = -0.000538275 Jy
! Component: 700  -  total flux cleaned = -0.000638721 Jy
! Component: 750  -  total flux cleaned = -0.000654755 Jy
! Component: 800  -  total flux cleaned = -0.000654671 Jy
! Component: 850  -  total flux cleaned = -0.000733895 Jy
! Component: 900  -  total flux cleaned = -0.000780502 Jy
! Component: 950  -  total flux cleaned = -0.00081124 Jy
! Component: 1000  -  total flux cleaned = -0.000856672 Jy
! Component: 1050  -  total flux cleaned = -0.000841994 Jy
! Component: 1100  -  total flux cleaned = -0.000930244 Jy
! Component: 1150  -  total flux cleaned = -0.000988007 Jy
! Component: 1200  -  total flux cleaned = -0.00101664 Jy
! Component: 1250  -  total flux cleaned = -0.00107286 Jy
! Component: 1300  -  total flux cleaned = -0.00107293 Jy
! Component: 1350  -  total flux cleaned = -0.00115509 Jy
! Component: 1400  -  total flux cleaned = -0.00116846 Jy
! Component: 1450  -  total flux cleaned = -0.0012354 Jy
! Component: 1500  -  total flux cleaned = -0.00127491 Jy
! Component: 1550  -  total flux cleaned = -0.0013008 Jy
! Component: 1600  -  total flux cleaned = -0.00136517 Jy
! Component: 1650  -  total flux cleaned = -0.00137782 Jy
! Component: 1700  -  total flux cleaned = -0.00139033 Jy
! Component: 1750  -  total flux cleaned = -0.00140271 Jy
! Component: 1800  -  total flux cleaned = -0.00146453 Jy
! Component: 1850  -  total flux cleaned = -0.0014277 Jy
! Component: 1900  -  total flux cleaned = -0.00146402 Jy
! Component: 1950  -  total flux cleaned = -0.00151193 Jy
! Component: 2000  -  total flux cleaned = -0.00146423 Jy
! Component: 2050  -  total flux cleaned = -0.00148782 Jy
! Component: 2100  -  total flux cleaned = -0.00149942 Jy
! Component: 2150  -  total flux cleaned = -0.00152258 Jy
! Component: 2200  -  total flux cleaned = -0.00155699 Jy
! Component: 2250  -  total flux cleaned = -0.00157968 Jy
! Component: 2300  -  total flux cleaned = -0.00157976 Jy
! Component: 2350  -  total flux cleaned = -0.00163563 Jy
! Component: 2400  -  total flux cleaned = -0.00163564 Jy
! Component: 2450  -  total flux cleaned = -0.00170162 Jy
! Component: 2500  -  total flux cleaned = -0.00174532 Jy
! Component: 2550  -  total flux cleaned = -0.00175619 Jy
! Component: 2600  -  total flux cleaned = -0.00183158 Jy
! Component: 2650  -  total flux cleaned = -0.00190632 Jy
! Component: 2700  -  total flux cleaned = -0.00189562 Jy
! Component: 2750  -  total flux cleaned = -0.00190616 Jy
! Component: 2800  -  total flux cleaned = -0.0019479 Jy
! Component: 2850  -  total flux cleaned = -0.00196868 Jy
! Component: 2900  -  total flux cleaned = -0.00198926 Jy
! Component: 2950  -  total flux cleaned = -0.00201992 Jy
! Component: 3000  -  total flux cleaned = -0.00203017 Jy
! Component: 3050  -  total flux cleaned = -0.00207059 Jy
! Component: 3100  -  total flux cleaned = -0.00207059 Jy
! Component: 3150  -  total flux cleaned = -0.00211065 Jy
! Component: 3200  -  total flux cleaned = -0.00212054 Jy
! Component: 3250  -  total flux cleaned = -0.00216006 Jy
! Component: 3300  -  total flux cleaned = -0.0021404 Jy
! Component: 3350  -  total flux cleaned = -0.00221857 Jy
! Component: 3400  -  total flux cleaned = -0.0022671 Jy
! Component: 3450  -  total flux cleaned = -0.00228649 Jy
! Component: 3500  -  total flux cleaned = -0.0023539 Jy
! Component: 3550  -  total flux cleaned = -0.00236354 Jy
! Component: 3600  -  total flux cleaned = -0.00242082 Jy
! Component: 3650  -  total flux cleaned = -0.00245886 Jy
! Component: 3700  -  total flux cleaned = -0.00248723 Jy
! Component: 3750  -  total flux cleaned = -0.0025626 Jy
! Component: 3800  -  total flux cleaned = -0.00261891 Jy
! Component: 3850  -  total flux cleaned = -0.00270301 Jy
! Component: 3900  -  total flux cleaned = -0.00279606 Jy
! Component: 3950  -  total flux cleaned = -0.00285169 Jy
! Component: 4000  -  total flux cleaned = -0.00292561 Jy
! Component: 4050  -  total flux cleaned = -0.00299933 Jy
! Total flux subtracted in 4096 components = -0.00308195 Jy
! Clean residual min=-0.000570 max=0.000569 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.262414 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 442 components and 0.262414 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0203+5411_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.158 x 1.746 at 50.2 degrees (North through East)
! Clean map  min=-0.0019239  max=0.15176 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0203+5411_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.151759 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148702 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.293958 0.293958 0.587916 1.17583 2.35166 4.70333 9.40665 18.8133 37.6266 75.2532
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.151 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1020.55 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0203+5411_X_uvs.log closed on Thu Apr  7 11:57:15 2016