! Started logfile: /scr/pima/bg219h_uvs/J0145+5810_S_uvs.log on Thu Apr  7 08:49:12 2016
obs /scr/pima/bg219h_uvs/J0145+5810_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0145+5810_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.486339 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0145+5810
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4272 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0145+5810_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012367Jy  sigma=25.302319
! Fit after  self-cal, rms=0.906363Jy  sigma=22.862503
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.675 mas, bmaj=6.79 mas, bpa=12.06 degrees
! Estimated noise=0.627345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0683148 Jy
! Component: 100  -  total flux cleaned = 0.101811 Jy
! Total flux subtracted in 100 components = 0.101811 Jy
! Clean residual min=-0.014376 max=0.019758 Jy/beam
! Clean residual mean=-0.000152 rms=0.004693 Jy/beam
! Combined flux in latest and established models = 0.101811 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.101811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082786Jy  sigma=2.021411
! Fit after  self-cal, rms=0.080683Jy  sigma=1.974958
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.194 mas, bmaj=7.64 mas, bpa=18.8 degrees
! Estimated noise=0.46961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0349178 Jy
! Component: 100  -  total flux cleaned = 0.0576403 Jy
! Component: 150  -  total flux cleaned = 0.0738788 Jy
! Component: 200  -  total flux cleaned = 0.0864386 Jy
! Total flux subtracted in 200 components = 0.0864386 Jy
! Clean residual min=-0.009508 max=0.015226 Jy/beam
! Clean residual mean=-0.000163 rms=0.003006 Jy/beam
! Combined flux in latest and established models = 0.188249 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 98 components and 0.188249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059653Jy  sigma=1.454255
! Fit after  self-cal, rms=0.058273Jy  sigma=1.427468
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.194 x 7.64 at 18.8 degrees (North through East)
! Clean map  min=-0.0084327  max=0.09594 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     HN        1.13     KP        0.89     LA        0.88     
!   MK        0.85     NL        1.15     OV        1.01     PT        0.84     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.058273Jy  sigma=1.427468
! Fit after  self-cal, rms=0.057714Jy  sigma=1.411599
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.213 mas, bmaj=7.687 mas, bpa=20.14 degrees
! Estimated noise=0.471503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136935 Jy
! Component: 100  -  total flux cleaned = 0.0224793 Jy
! Component: 150  -  total flux cleaned = 0.0291835 Jy
! Component: 200  -  total flux cleaned = 0.0346235 Jy
! Total flux subtracted in 200 components = 0.0346235 Jy
! Clean residual min=-0.005504 max=0.004942 Jy/beam
! Clean residual mean=-0.000107 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.222873 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 131 components and 0.222873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053705Jy  sigma=1.302696
! Fit after  self-cal, rms=0.053389Jy  sigma=1.294428
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053389Jy  sigma=1.294428
! Fit after  self-cal, rms=0.051431Jy  sigma=1.247770
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.292 mas, bmaj=7.681 mas, bpa=21.52 degrees
! Estimated noise=0.463329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033539 Jy
! Component: 100  -  total flux cleaned = 0.00561642 Jy
! Component: 150  -  total flux cleaned = 0.00725615 Jy
! Component: 200  -  total flux cleaned = 0.00840395 Jy
! Total flux subtracted in 200 components = 0.00840395 Jy
! Clean residual min=-0.002972 max=0.003987 Jy/beam
! Clean residual mean=-0.000040 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.231277 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 144 components and 0.231277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051170Jy  sigma=1.240388
! Fit after  self-cal, rms=0.051187Jy  sigma=1.239065
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298748 Jy
! Component: 100  -  total flux cleaned = 0.00409371 Jy
! Component: 150  -  total flux cleaned = 0.00501979 Jy
! Component: 200  -  total flux cleaned = 0.00577109 Jy
! Total flux subtracted in 200 components = 0.00577109 Jy
! Clean residual min=-0.002586 max=0.002582 Jy/beam
! Clean residual mean=-0.000024 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.237048 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 182 components and 0.237048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050935Jy  sigma=1.232750
! Fit after  self-cal, rms=0.050908Jy  sigma=1.232046
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050908Jy  sigma=1.232046
! Fit after  self-cal, rms=0.050002Jy  sigma=1.218623
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.313 mas, bmaj=7.667 mas, bpa=21.63 degrees
! Estimated noise=0.459244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000783568 Jy
! Component: 100  -  total flux cleaned = 0.00091725 Jy
! Component: 150  -  total flux cleaned = 0.00116613 Jy
! Component: 200  -  total flux cleaned = 0.00146573 Jy
! Total flux subtracted in 200 components = 0.00146573 Jy
! Clean residual min=-0.002134 max=0.002153 Jy/beam
! Clean residual mean=-0.000002 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.238514 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 200 components and 0.238514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049932Jy  sigma=1.216755
! Fit after  self-cal, rms=0.049914Jy  sigma=1.216412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000371561 Jy
! Component: 100  -  total flux cleaned = 0.000725175 Jy
! Component: 150  -  total flux cleaned = 0.00107087 Jy
! Component: 200  -  total flux cleaned = 0.00138675 Jy
! Total flux subtracted in 200 components = 0.00138675 Jy
! Clean residual min=-0.002134 max=0.002047 Jy/beam
! Clean residual mean=0.000002 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.2399 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 214 components and 0.2399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049882Jy  sigma=1.215666
! Fit after  self-cal, rms=0.049872Jy  sigma=1.215595
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049872Jy  sigma=1.215595
! Fit after  self-cal, rms=0.049730Jy  sigma=1.215392
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.211 mas, bmaj=8.997 mas, bpa=30.7 degrees
! Estimated noise=0.493136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000967811 Jy
! Component: 100  -  total flux cleaned = 0.00139775 Jy
! Component: 150  -  total flux cleaned = 0.00177682 Jy
! Component: 200  -  total flux cleaned = 0.00211657 Jy
! Total flux subtracted in 200 components = 0.00211657 Jy
! Clean residual min=-0.002282 max=0.002207 Jy/beam
! Clean residual mean=0.000008 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.242017 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 241 components and 0.242017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049709Jy  sigma=1.214756
! Fit after  self-cal, rms=0.049703Jy  sigma=1.214653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00056746 Jy
! Component: 100  -  total flux cleaned = 0.000890446 Jy
! Component: 150  -  total flux cleaned = 0.00115658 Jy
! Component: 200  -  total flux cleaned = 0.00140143 Jy
! Total flux subtracted in 200 components = 0.00140143 Jy
! Clean residual min=-0.002242 max=0.002160 Jy/beam
! Clean residual mean=0.000014 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.243418 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 264 components and 0.243418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049690Jy  sigma=1.214300
! Fit after  self-cal, rms=0.049684Jy  sigma=1.214255
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.314 mas, bmaj=7.666 mas, bpa=21.55 degrees
! Estimated noise=0.457439 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.314 x 7.666 at 21.55 degrees (North through East)
! Clean map  min=-0.0019125  max=0.093806 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.796 mas, bmaj=6.803 mas, bpa=16.29 degrees
! Estimated noise=0.617515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0687343 Jy
! Component: 100  -  total flux cleaned = 0.105778 Jy
! Component: 150  -  total flux cleaned = 0.130883 Jy
! Component: 200  -  total flux cleaned = 0.149263 Jy
! Total flux subtracted in 200 components = 0.149263 Jy
! Clean residual min=-0.008556 max=0.011602 Jy/beam
! Clean residual mean=-0.000083 rms=0.002709 Jy/beam
! Combined flux in latest and established models = 0.149263 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.149263 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.314 mas, bmaj=7.666 mas, bpa=21.55 degrees
! Estimated noise=0.457439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184372 Jy
! Component: 100  -  total flux cleaned = 0.0313073 Jy
! Component: 150  -  total flux cleaned = 0.0409378 Jy
! Component: 200  -  total flux cleaned = 0.0484988 Jy
! Total flux subtracted in 200 components = 0.0484988 Jy
! Clean residual min=-0.005158 max=0.006116 Jy/beam
! Clean residual mean=-0.000072 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.197761 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 134 components and 0.197761 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.211 mas, bmaj=8.997 mas, bpa=30.7 degrees
! Estimated noise=0.493136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00847102 Jy
! Component: 100  -  total flux cleaned = 0.0147224 Jy
! Component: 150  -  total flux cleaned = 0.019672 Jy
! Component: 200  -  total flux cleaned = 0.0236666 Jy
! Total flux subtracted in 200 components = 0.0236666 Jy
! Clean residual min=-0.004133 max=0.003570 Jy/beam
! Clean residual mean=-0.000057 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.221428 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00330198 Jy
! Component: 100  -  total flux cleaned = 0.00611234 Jy
! Component: 150  -  total flux cleaned = 0.00852226 Jy
! Component: 200  -  total flux cleaned = 0.010607 Jy
! Total flux subtracted in 200 components = 0.010607 Jy
! Clean residual min=-0.003196 max=0.002302 Jy/beam
! Clean residual mean=-0.000022 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.232035 Jy
! Adding 129 model components to the UV plane model.
! The established model now contains 240 components and 0.232035 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.314 mas, bmaj=7.666 mas, bpa=21.55 degrees
! Estimated noise=0.457439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167937 Jy
! Component: 100  -  total flux cleaned = 0.00297195 Jy
! Component: 150  -  total flux cleaned = 0.00411736 Jy
! Component: 200  -  total flux cleaned = 0.00503193 Jy
! Total flux subtracted in 200 components = 0.00503193 Jy
! Clean residual min=-0.002625 max=0.002228 Jy/beam
! Clean residual mean=-0.000004 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.237067 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 263 components and 0.237067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049860Jy  sigma=1.218541
! Fit after  self-cal, rms=0.049848Jy  sigma=1.217997
wmodel /scr/pima/bg219h_uvs/J0145+5810_S_map.mod
! Writing 263 model components to file: /scr/pima/bg219h_uvs/J0145+5810_S_map.mod
wobs /scr/pima/bg219h_uvs/J0145+5810_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0145+5810_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J0145+5810_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J0145+5810_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104327 Jy
! Component: 100  -  total flux cleaned = -0.00177243 Jy
! Component: 150  -  total flux cleaned = -0.0021957 Jy
! Component: 200  -  total flux cleaned = -0.00249356 Jy
! Component: 250  -  total flux cleaned = -0.00265012 Jy
! Component: 300  -  total flux cleaned = -0.00276755 Jy
! Component: 350  -  total flux cleaned = -0.00285195 Jy
! Component: 400  -  total flux cleaned = -0.00293235 Jy
! Component: 450  -  total flux cleaned = -0.00298291 Jy
! Component: 500  -  total flux cleaned = -0.00308131 Jy
! Component: 550  -  total flux cleaned = -0.00319983 Jy
! Component: 600  -  total flux cleaned = -0.00329082 Jy
! Component: 650  -  total flux cleaned = -0.00346652 Jy
! Component: 700  -  total flux cleaned = -0.0035728 Jy
! Component: 750  -  total flux cleaned = -0.00369604 Jy
! Component: 800  -  total flux cleaned = -0.00381539 Jy
! Component: 850  -  total flux cleaned = -0.0039892 Jy
! Component: 900  -  total flux cleaned = -0.00412021 Jy
! Component: 950  -  total flux cleaned = -0.00419229 Jy
! Component: 1000  -  total flux cleaned = -0.00431617 Jy
! Component: 1050  -  total flux cleaned = -0.0043848 Jy
! Component: 1100  -  total flux cleaned = -0.00446863 Jy
! Component: 1150  -  total flux cleaned = -0.0045342 Jy
! Component: 1200  -  total flux cleaned = -0.00466146 Jy
! Component: 1250  -  total flux cleaned = -0.0047544 Jy
! Component: 1300  -  total flux cleaned = -0.00481495 Jy
! Component: 1350  -  total flux cleaned = -0.00493365 Jy
! Component: 1400  -  total flux cleaned = -0.00502063 Jy
! Component: 1450  -  total flux cleaned = -0.00507756 Jy
! Component: 1500  -  total flux cleaned = -0.00518854 Jy
! Component: 1550  -  total flux cleaned = -0.00524247 Jy
! Component: 1600  -  total flux cleaned = -0.00534887 Jy
! Component: 1650  -  total flux cleaned = -0.0054403 Jy
! Component: 1700  -  total flux cleaned = -0.00551751 Jy
! Component: 1750  -  total flux cleaned = -0.00563104 Jy
! Component: 1800  -  total flux cleaned = -0.00569315 Jy
! Component: 1850  -  total flux cleaned = -0.00576641 Jy
! Component: 1900  -  total flux cleaned = -0.00582644 Jy
! Component: 1950  -  total flux cleaned = -0.00589758 Jy
! Component: 2000  -  total flux cleaned = -0.00594437 Jy
! Component: 2050  -  total flux cleaned = -0.00601368 Jy
! Component: 2100  -  total flux cleaned = -0.00607056 Jy
! Component: 2150  -  total flux cleaned = -0.00611557 Jy
! Component: 2200  -  total flux cleaned = -0.00617091 Jy
! Component: 2250  -  total flux cleaned = -0.00620372 Jy
! Component: 2300  -  total flux cleaned = -0.00625785 Jy
! Component: 2350  -  total flux cleaned = -0.00631136 Jy
! Component: 2400  -  total flux cleaned = -0.00636413 Jy
! Component: 2450  -  total flux cleaned = -0.00642672 Jy
! Component: 2500  -  total flux cleaned = -0.00645764 Jy
! Component: 2550  -  total flux cleaned = -0.00649842 Jy
! Component: 2600  -  total flux cleaned = -0.00649834 Jy
! Component: 2650  -  total flux cleaned = -0.00651837 Jy
! Component: 2700  -  total flux cleaned = -0.00653815 Jy
! Component: 2750  -  total flux cleaned = -0.00658709 Jy
! Component: 2800  -  total flux cleaned = -0.00658701 Jy
! Component: 2850  -  total flux cleaned = -0.00662545 Jy
! Component: 2900  -  total flux cleaned = -0.00664453 Jy
! Component: 2950  -  total flux cleaned = -0.00663503 Jy
! Component: 3000  -  total flux cleaned = -0.00670997 Jy
! Component: 3050  -  total flux cleaned = -0.00672855 Jy
! Component: 3100  -  total flux cleaned = -0.00676542 Jy
! Component: 3150  -  total flux cleaned = -0.00681101 Jy
! Component: 3200  -  total flux cleaned = -0.00681103 Jy
! Component: 3250  -  total flux cleaned = -0.00683809 Jy
! Component: 3300  -  total flux cleaned = -0.00684698 Jy
! Component: 3350  -  total flux cleaned = -0.00682923 Jy
! Component: 3400  -  total flux cleaned = -0.00683808 Jy
! Component: 3450  -  total flux cleaned = -0.00684688 Jy
! Component: 3500  -  total flux cleaned = -0.00683821 Jy
! Component: 3550  -  total flux cleaned = -0.00685548 Jy
! Component: 3600  -  total flux cleaned = -0.00686399 Jy
! Component: 3650  -  total flux cleaned = -0.00683835 Jy
! Component: 3700  -  total flux cleaned = -0.00683831 Jy
! Component: 3750  -  total flux cleaned = -0.00681306 Jy
! Component: 3800  -  total flux cleaned = -0.00682141 Jy
! Component: 3850  -  total flux cleaned = -0.00679637 Jy
! Component: 3900  -  total flux cleaned = -0.00682119 Jy
! Component: 3950  -  total flux cleaned = -0.00681287 Jy
! Component: 4000  -  total flux cleaned = -0.00681285 Jy
! Component: 4050  -  total flux cleaned = -0.00681286 Jy
! Total flux subtracted in 4096 components = -0.00683729 Jy
! Clean residual min=-0.000500 max=0.000411 Jy/beam
! Clean residual mean=-0.000001 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.23023 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 547 components and 0.23023 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0145+5810_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.314 x 7.666 at 21.55 degrees (North through East)
! Clean map  min=-0.0016185  max=0.092273 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0145+5810_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0922733 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000141826 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.461106 0.461106 0.922212 1.84442 3.68885 7.37769 14.7554 29.5108 59.0215
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  650.609 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0145+5810_S_uvs.log closed on Thu Apr  7 08:49:16 2016