! Started logfile: /scr/pima/bg219h_uvs/J0140-1532_S_uvs.log on Thu Apr  7 08:49:04 2016
obs /scr/pima/bg219h_uvs/J0140-1532_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0140-1532_S_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.842857 visibilities/baseline/integration-bin.
! Found source: J0140-1532
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4248 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0140-1532_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.035186Jy  sigma=21.069078
! Fit after  self-cal, rms=0.747164Jy  sigma=15.222617
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.369 mas, bmaj=6.329 mas, bpa=-5.187 degrees
! Estimated noise=0.887804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195508 Jy
! Component: 100  -  total flux cleaned = 0.241508 Jy
! Total flux subtracted in 100 components = 0.241508 Jy
! Clean residual min=-0.008637 max=0.018345 Jy/beam
! Clean residual mean=0.000002 rms=0.002440 Jy/beam
! Combined flux in latest and established models = 0.241509 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.241509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076456Jy  sigma=1.504530
! Fit after  self-cal, rms=0.076444Jy  sigma=1.504350
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203518 Jy
! Component: 100  -  total flux cleaned = 0.0315813 Jy
! Total flux subtracted in 100 components = 0.0315813 Jy
! Clean residual min=-0.006354 max=0.010017 Jy/beam
! Clean residual mean=0.000005 rms=0.001708 Jy/beam
! Combined flux in latest and established models = 0.27309 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.27309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069609Jy  sigma=1.364649
! Fit after  self-cal, rms=0.069594Jy  sigma=1.364189
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.914 mas, bmaj=7.322 mas, bpa=-5.654 degrees
! Estimated noise=0.636505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00952235 Jy
! Component: 100  -  total flux cleaned = 0.0144471 Jy
! Component: 150  -  total flux cleaned = 0.0164307 Jy
! Component: 200  -  total flux cleaned = 0.017231 Jy
! Total flux subtracted in 200 components = 0.017231 Jy
! Clean residual min=-0.004654 max=0.005608 Jy/beam
! Clean residual mean=0.000015 rms=0.001337 Jy/beam
! Combined flux in latest and established models = 0.290321 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 0.290321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067979Jy  sigma=1.335287
! Fit after  self-cal, rms=0.067945Jy  sigma=1.334194
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.914 x 7.322 at -5.654 degrees (North through East)
! Clean map  min=-0.0046457  max=0.25201 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.99     KP        0.98     
!   LA        1.06     MK        1.01     NL        0.97     OV        0.97     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        0.99     KP        0.97     
!   LA        1.04     MK        1.03     NL        1.18     OV        0.96     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        1.01     KP        0.98     
!   LA        1.00     MK        1.04     NL        1.09     OV        0.95     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.02     KP        1.00     
!   LA        0.99     MK        0.96     NL        0.94     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.067945Jy  sigma=1.334194
! Fit after  self-cal, rms=0.066377Jy  sigma=1.293795
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.923 mas, bmaj=7.334 mas, bpa=-5.53 degrees
! Estimated noise=0.635382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211659 Jy
! Component: 100  -  total flux cleaned = 0.00212028 Jy
! Component: 150  -  total flux cleaned = 0.00212204 Jy
! Component: 200  -  total flux cleaned = 0.00186956 Jy
! Total flux subtracted in 200 components = 0.00186956 Jy
! Clean residual min=-0.003887 max=0.004694 Jy/beam
! Clean residual mean=0.000009 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.29219 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 54 components and 0.29219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066117Jy  sigma=1.289373
! Fit after  self-cal, rms=0.066106Jy  sigma=1.288967
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066106Jy  sigma=1.288967
! Fit after  self-cal, rms=0.065988Jy  sigma=1.261909
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.393 mas, bpa=-5.046 degrees
! Estimated noise=0.63959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175956 Jy
! Component: 100  -  total flux cleaned = 0.00148545 Jy
! Component: 150  -  total flux cleaned = 0.00131007 Jy
! Component: 200  -  total flux cleaned = 0.00125924 Jy
! Total flux subtracted in 200 components = 0.00125924 Jy
! Clean residual min=-0.002849 max=0.003243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.29345 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.29345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065858Jy  sigma=1.258602
! Fit after  self-cal, rms=0.065865Jy  sigma=1.258325
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 38.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267608 Jy
! Component: 100  -  total flux cleaned = 0.00322654 Jy
! Component: 150  -  total flux cleaned = 0.00317401 Jy
! Component: 200  -  total flux cleaned = 0.00312755 Jy
! Total flux subtracted in 200 components = 0.00312755 Jy
! Clean residual min=-0.002858 max=0.002798 Jy/beam
! Clean residual mean=-0.000001 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.296577 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.296577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065709Jy  sigma=1.255178
! Fit after  self-cal, rms=0.065703Jy  sigma=1.255095
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065703Jy  sigma=1.255095
! Fit after  self-cal, rms=0.065834Jy  sigma=1.254687
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.401 mas, bpa=-5.017 degrees
! Estimated noise=0.639817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483071 Jy
! Component: 100  -  total flux cleaned = 0.000439745 Jy
! Component: 150  -  total flux cleaned = 0.000401469 Jy
! Component: 200  -  total flux cleaned = 0.000365218 Jy
! Total flux subtracted in 200 components = 0.000365218 Jy
! Clean residual min=-0.002818 max=0.002725 Jy/beam
! Clean residual mean=-0.000002 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.296942 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 101 components and 0.296942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065781Jy  sigma=1.253512
! Fit after  self-cal, rms=0.065782Jy  sigma=1.253493
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.14545e-05 Jy
! Component: 100  -  total flux cleaned = 1.09095e-05 Jy
! Component: 150  -  total flux cleaned = 4.15628e-05 Jy
! Component: 200  -  total flux cleaned = 4.28639e-05 Jy
! Total flux subtracted in 200 components = 4.28639e-05 Jy
! Clean residual min=-0.002822 max=0.002671 Jy/beam
! Clean residual mean=-0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.296985 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.296985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065756Jy  sigma=1.252920
! Fit after  self-cal, rms=0.065754Jy  sigma=1.252916
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065754Jy  sigma=1.252916
! Fit after  self-cal, rms=0.065835Jy  sigma=1.252801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.883 mas, bmaj=13.92 mas, bpa=-2.249 degrees
! Estimated noise=0.845302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.49756e-05 Jy
! Component: 100  -  total flux cleaned = -6.43636e-05 Jy
! Component: 150  -  total flux cleaned = -0.000151331 Jy
! Component: 200  -  total flux cleaned = -0.000209036 Jy
! Total flux subtracted in 200 components = -0.000209036 Jy
! Clean residual min=-0.002999 max=0.002472 Jy/beam
! Clean residual mean=-0.000005 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.296776 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 125 components and 0.296776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065830Jy  sigma=1.252609
! Fit after  self-cal, rms=0.065827Jy  sigma=1.252570
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.70266e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011619 Jy
! Component: 150  -  total flux cleaned = 5.27181e-05 Jy
! Component: 200  -  total flux cleaned = 8.5154e-06 Jy
! Total flux subtracted in 200 components = 8.5154e-06 Jy
! Clean residual min=-0.002953 max=0.002401 Jy/beam
! Clean residual mean=-0.000005 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.296785 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 130 components and 0.296785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065827Jy  sigma=1.252508
! Fit after  self-cal, rms=0.065824Jy  sigma=1.252488
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.403 mas, bpa=-4.988 degrees
! Estimated noise=0.640056 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.928 x 7.403 at -4.988 degrees (North through East)
! Clean map  min=-0.0026131  max=0.25238 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.371 mas, bmaj=6.388 mas, bpa=-4.542 degrees
! Estimated noise=0.893057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19663 Jy
! Component: 100  -  total flux cleaned = 0.241256 Jy
! Component: 150  -  total flux cleaned = 0.25986 Jy
! Component: 200  -  total flux cleaned = 0.269907 Jy
! Total flux subtracted in 200 components = 0.269907 Jy
! Clean residual min=-0.005410 max=0.006444 Jy/beam
! Clean residual mean=-0.000002 rms=0.001292 Jy/beam
! Combined flux in latest and established models = 0.269907 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.269907 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.403 mas, bpa=-4.988 degrees
! Estimated noise=0.640056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00903228 Jy
! Component: 100  -  total flux cleaned = 0.0141362 Jy
! Component: 150  -  total flux cleaned = 0.0177106 Jy
! Component: 200  -  total flux cleaned = 0.0204604 Jy
! Total flux subtracted in 200 components = 0.0204604 Jy
! Clean residual min=-0.003053 max=0.002962 Jy/beam
! Clean residual mean=-0.000002 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.290368 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 51 components and 0.290368 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.883 mas, bmaj=13.92 mas, bpa=-2.249 degrees
! Estimated noise=0.845302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255789 Jy
! Component: 100  -  total flux cleaned = 0.00399592 Jy
! Component: 150  -  total flux cleaned = 0.00448157 Jy
! Component: 200  -  total flux cleaned = 0.00484258 Jy
! Total flux subtracted in 200 components = 0.00484258 Jy
! Clean residual min=-0.002773 max=0.002535 Jy/beam
! Clean residual mean=-0.000005 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.29521 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301724 Jy
! Component: 100  -  total flux cleaned = 0.000482645 Jy
! Component: 150  -  total flux cleaned = 0.000574845 Jy
! Component: 200  -  total flux cleaned = 0.000637767 Jy
! Total flux subtracted in 200 components = 0.000637767 Jy
! Clean residual min=-0.002728 max=0.002466 Jy/beam
! Clean residual mean=-0.000005 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.295848 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 78 components and 0.295848 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.403 mas, bpa=-4.988 degrees
! Estimated noise=0.640056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000568714 Jy
! Component: 100  -  total flux cleaned = -0.000448765 Jy
! Component: 150  -  total flux cleaned = -0.000287599 Jy
! Component: 200  -  total flux cleaned = -9.39554e-05 Jy
! Total flux subtracted in 200 components = -9.39554e-05 Jy
! Clean residual min=-0.003003 max=0.002695 Jy/beam
! Clean residual mean=-0.000002 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.295754 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.295754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065977Jy  sigma=1.254631
! Fit after  self-cal, rms=0.065964Jy  sigma=1.254483
wmodel /scr/pima/bg219h_uvs/J0140-1532_S_map.mod
! Writing 94 model components to file: /scr/pima/bg219h_uvs/J0140-1532_S_map.mod
wobs /scr/pima/bg219h_uvs/J0140-1532_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0140-1532_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J0140-1532_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J0140-1532_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182188 Jy
! Component: 100  -  total flux cleaned = -8.72921e-05 Jy
! Component: 150  -  total flux cleaned = 0.000140527 Jy
! Component: 200  -  total flux cleaned = 0.000183513 Jy
! Component: 250  -  total flux cleaned = 0.000267951 Jy
! Component: 300  -  total flux cleaned = 0.000349674 Jy
! Component: 350  -  total flux cleaned = 0.000389521 Jy
! Component: 400  -  total flux cleaned = 0.00046672 Jy
! Component: 450  -  total flux cleaned = 0.000729034 Jy
! Component: 500  -  total flux cleaned = 0.000874072 Jy
! Component: 550  -  total flux cleaned = 0.000837696 Jy
! Component: 600  -  total flux cleaned = 0.000977922 Jy
! Component: 650  -  total flux cleaned = 0.000943712 Jy
! Component: 700  -  total flux cleaned = 0.0010448 Jy
! Component: 750  -  total flux cleaned = 0.00117616 Jy
! Component: 800  -  total flux cleaned = 0.00124125 Jy
! Component: 850  -  total flux cleaned = 0.00133732 Jy
! Component: 900  -  total flux cleaned = 0.00155622 Jy
! Component: 950  -  total flux cleaned = 0.00167887 Jy
! Component: 1000  -  total flux cleaned = 0.00176915 Jy
! Component: 1050  -  total flux cleaned = 0.00182872 Jy
! Component: 1100  -  total flux cleaned = 0.00194654 Jy
! Component: 1150  -  total flux cleaned = 0.00203373 Jy
! Component: 1200  -  total flux cleaned = 0.00217749 Jy
! Component: 1250  -  total flux cleaned = 0.00229083 Jy
! Component: 1300  -  total flux cleaned = 0.0024581 Jy
! Component: 1350  -  total flux cleaned = 0.0025131 Jy
! Component: 1400  -  total flux cleaned = 0.00262233 Jy
! Component: 1450  -  total flux cleaned = 0.00272941 Jy
! Component: 1500  -  total flux cleaned = 0.00286218 Jy
! Component: 1550  -  total flux cleaned = 0.00301893 Jy
! Component: 1600  -  total flux cleaned = 0.00301864 Jy
! Component: 1650  -  total flux cleaned = 0.00309604 Jy
! Component: 1700  -  total flux cleaned = 0.00322261 Jy
! Component: 1750  -  total flux cleaned = 0.00329749 Jy
! Component: 1800  -  total flux cleaned = 0.00332214 Jy
! Component: 1850  -  total flux cleaned = 0.00332203 Jy
! Component: 1900  -  total flux cleaned = 0.00344382 Jy
! Component: 1950  -  total flux cleaned = 0.00349239 Jy
! Component: 2000  -  total flux cleaned = 0.00356407 Jy
! Component: 2050  -  total flux cleaned = 0.00363517 Jy
! Component: 2100  -  total flux cleaned = 0.003752 Jy
! Component: 2150  -  total flux cleaned = 0.00382138 Jy
! Component: 2200  -  total flux cleaned = 0.00400506 Jy
! Component: 2250  -  total flux cleaned = 0.00393655 Jy
! Component: 2300  -  total flux cleaned = 0.00400466 Jy
! Component: 2350  -  total flux cleaned = 0.00404924 Jy
! Component: 2400  -  total flux cleaned = 0.00404943 Jy
! Component: 2450  -  total flux cleaned = 0.00413764 Jy
! Component: 2500  -  total flux cleaned = 0.0042465 Jy
! Component: 2550  -  total flux cleaned = 0.00439714 Jy
! Component: 2600  -  total flux cleaned = 0.00439676 Jy
! Component: 2650  -  total flux cleaned = 0.00443925 Jy
! Component: 2700  -  total flux cleaned = 0.00454449 Jy
! Component: 2750  -  total flux cleaned = 0.00456535 Jy
! Component: 2800  -  total flux cleaned = 0.004648 Jy
! Component: 2850  -  total flux cleaned = 0.00468926 Jy
! Component: 2900  -  total flux cleaned = 0.0048316 Jy
! Component: 2950  -  total flux cleaned = 0.00489197 Jy
! Component: 3000  -  total flux cleaned = 0.00491185 Jy
! Component: 3050  -  total flux cleaned = 0.00493167 Jy
! Component: 3100  -  total flux cleaned = 0.00506898 Jy
! Component: 3150  -  total flux cleaned = 0.005069 Jy
! Component: 3200  -  total flux cleaned = 0.00514634 Jy
! Component: 3250  -  total flux cleaned = 0.00518475 Jy
! Component: 3300  -  total flux cleaned = 0.00516564 Jy
! Component: 3350  -  total flux cleaned = 0.00526027 Jy
! Component: 3400  -  total flux cleaned = 0.00535377 Jy
! Component: 3450  -  total flux cleaned = 0.0053537 Jy
! Component: 3500  -  total flux cleaned = 0.00540908 Jy
! Component: 3550  -  total flux cleaned = 0.00551875 Jy
! Component: 3600  -  total flux cleaned = 0.00551846 Jy
! Component: 3650  -  total flux cleaned = 0.0054824 Jy
! Component: 3700  -  total flux cleaned = 0.00548216 Jy
! Component: 3750  -  total flux cleaned = 0.00549974 Jy
! Component: 3800  -  total flux cleaned = 0.00548193 Jy
! Component: 3850  -  total flux cleaned = 0.00541213 Jy
! Component: 3900  -  total flux cleaned = 0.00548192 Jy
! Component: 3950  -  total flux cleaned = 0.00548197 Jy
! Component: 4000  -  total flux cleaned = 0.0054305 Jy
! Component: 4050  -  total flux cleaned = 0.00549872 Jy
! Total flux subtracted in 4096 components = 0.00549875 Jy
! Clean residual min=-0.000994 max=0.000966 Jy/beam
! Clean residual mean=-0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.301253 Jy
keep
! Adding 280 model components to the UV plane model.
! The established model now contains 374 components and 0.301253 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0140-1532_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.928 x 7.403 at -4.988 degrees (North through East)
! Clean map  min=-0.0018767  max=0.25337 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0140-1532_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.253368 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000289231 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.342463 0.342463 0.684926 1.36985 2.7397 5.47941 10.9588 21.9176 43.8353 87.6705
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.253 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  876.007 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0140-1532_S_uvs.log closed on Thu Apr  7 08:49:07 2016