! Started logfile: /scr/pima/bg219h_uvs/J0132+5620_X_dfm.log on Thu May 19 22:01:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0132+5620_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0132+5620_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.653175 visibilities/baseline/integration-bin.
! Found source: J0132+5620
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 9876 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0132+5620_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028179Jy  sigma=23.822577
! Fit after  self-cal, rms=0.796596Jy  sigma=18.295055
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7818 mas, bmaj=1.753 mas, bpa=45.95 degrees
! Estimated noise=0.715156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147836 Jy
! Component: 100  -  total flux cleaned = 0.194787 Jy
! Total flux subtracted in 100 components = 0.194787 Jy
! Clean residual min=-0.012920 max=0.020603 Jy/beam
! Clean residual mean=0.000064 rms=0.003034 Jy/beam
! Combined flux in latest and established models = 0.194787 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.194787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090818Jy  sigma=2.015326
! Fit after  self-cal, rms=0.090352Jy  sigma=2.003258
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246916 Jy
! Component: 100  -  total flux cleaned = 0.038448 Jy
! Total flux subtracted in 100 components = 0.038448 Jy
! Clean residual min=-0.008927 max=0.018827 Jy/beam
! Clean residual mean=0.000032 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 0.233235 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.233235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080539Jy  sigma=1.727116
! Fit after  self-cal, rms=0.080457Jy  sigma=1.722450
! Inverting map 
! Added new window around map position (11.8, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168956 Jy
! Component: 100  -  total flux cleaned = 0.0270253 Jy
! Total flux subtracted in 100 components = 0.0270253 Jy
! Clean residual min=-0.006287 max=0.007817 Jy/beam
! Clean residual mean=0.000034 rms=0.001665 Jy/beam
! Combined flux in latest and established models = 0.26026 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 34 components and 0.26026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075633Jy  sigma=1.591810
! Fit after  self-cal, rms=0.075369Jy  sigma=1.586202
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=1.856 mas, bpa=47.44 degrees
! Estimated noise=0.353936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123428 Jy
! Component: 100  -  total flux cleaned = 0.0204777 Jy
! Component: 150  -  total flux cleaned = 0.0263431 Jy
! Component: 200  -  total flux cleaned = 0.0307375 Jy
! Total flux subtracted in 200 components = 0.0307375 Jy
! Clean residual min=-0.004538 max=0.004773 Jy/beam
! Clean residual mean=0.000033 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.290998 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 64 components and 0.290998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073012Jy  sigma=1.521318
! Fit after  self-cal, rms=0.072932Jy  sigma=1.519281
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 1.856 at 47.44 degrees (North through East)
! Clean map  min=-0.0044135  max=0.20244 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.04     KP        0.95     
!   LA        0.96     MK        0.94     NL        1.00     OV        1.01     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.08     KP        0.96     
!   LA        0.95     MK        1.00     NL        0.98     OV        0.98     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.07     KP        0.98     
!   LA        0.93     MK        0.99     NL        0.96     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.09     KP        0.96     
!   LA        0.95     MK        0.96     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.11     KP        0.97     
!   LA        0.95     MK        1.07     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.09     KP        0.97     
!   LA        0.95     MK        0.99     NL        0.99     OV        1.02     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.06     KP        0.98     
!   LA        0.95     MK        0.98     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.08     KP        0.98     
!   LA        0.96     MK        1.05     NL        1.04     OV        1.05     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.06     KP        0.99     
!   LA        0.97     MK        1.09     NL        0.99     OV        1.02     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.12     KP        1.00     
!   LA        0.95     MK        1.02     NL        1.05     OV        1.01     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.13     KP        1.03     
!   LA        0.99     MK        0.96     NL        1.02     OV        1.01     
!   PT        0.95     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.072932Jy  sigma=1.519281
! Fit after  self-cal, rms=0.074103Jy  sigma=1.500728
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.871 mas, bpa=47.57 degrees
! Estimated noise=0.354448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347802 Jy
! Component: 100  -  total flux cleaned = 0.00520114 Jy
! Component: 150  -  total flux cleaned = 0.00628688 Jy
! Component: 200  -  total flux cleaned = 0.0065675 Jy
! Total flux subtracted in 200 components = 0.0065675 Jy
! Clean residual min=-0.003315 max=0.003110 Jy/beam
! Clean residual mean=0.000020 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.297565 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 91 components and 0.297565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073918Jy  sigma=1.496597
! Fit after  self-cal, rms=0.073924Jy  sigma=1.495902
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073924Jy  sigma=1.495902
! Fit after  self-cal, rms=0.073815Jy  sigma=1.486496
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.86 mas, bpa=47.86 degrees
! Estimated noise=0.355665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159427 Jy
! Component: 100  -  total flux cleaned = 0.00234985 Jy
! Component: 150  -  total flux cleaned = 0.00271425 Jy
! Component: 200  -  total flux cleaned = 0.0029149 Jy
! Total flux subtracted in 200 components = 0.0029149 Jy
! Clean residual min=-0.002550 max=0.002725 Jy/beam
! Clean residual mean=0.000018 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.30048 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 105 components and 0.30048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073728Jy  sigma=1.485043
! Fit after  self-cal, rms=0.073731Jy  sigma=1.484933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112829 Jy
! Component: 100  -  total flux cleaned = 0.00138973 Jy
! Component: 150  -  total flux cleaned = 0.00144405 Jy
! Component: 200  -  total flux cleaned = 0.00153791 Jy
! Total flux subtracted in 200 components = 0.00153791 Jy
! Clean residual min=-0.002319 max=0.002462 Jy/beam
! Clean residual mean=0.000016 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.302018 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 128 components and 0.302018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073597Jy  sigma=1.482347
! Fit after  self-cal, rms=0.073591Jy  sigma=1.482179
! Inverting map 
! Added new window around map position (-49, -12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210215 Jy
! Component: 100  -  total flux cleaned = 0.00297738 Jy
! Component: 150  -  total flux cleaned = 0.00344665 Jy
! Component: 200  -  total flux cleaned = 0.00387938 Jy
! Total flux subtracted in 200 components = 0.00387938 Jy
! Clean residual min=-0.002133 max=0.002102 Jy/beam
! Clean residual mean=0.000015 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.305898 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 143 components and 0.305898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073492Jy  sigma=1.480527
! Fit after  self-cal, rms=0.073488Jy  sigma=1.480393
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073488Jy  sigma=1.480393
! Fit after  self-cal, rms=0.073582Jy  sigma=1.479800
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.853 mas, bpa=47.87 degrees
! Estimated noise=0.357071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125746 Jy
! Component: 100  -  total flux cleaned = 0.00184245 Jy
! Component: 150  -  total flux cleaned = 0.00237237 Jy
! Component: 200  -  total flux cleaned = 0.00282532 Jy
! Total flux subtracted in 200 components = 0.00282532 Jy
! Clean residual min=-0.002021 max=0.002072 Jy/beam
! Clean residual mean=0.000016 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.308723 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 150 components and 0.308723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073516Jy  sigma=1.478829
! Fit after  self-cal, rms=0.073514Jy  sigma=1.478799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (37.6, -37).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159328 Jy
! Component: 100  -  total flux cleaned = 0.0020151 Jy
! Component: 150  -  total flux cleaned = 0.00205395 Jy
! Component: 200  -  total flux cleaned = 0.00216768 Jy
! Total flux subtracted in 200 components = 0.00216768 Jy
! Clean residual min=-0.002001 max=0.002006 Jy/beam
! Clean residual mean=0.000014 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.31089 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 167 components and 0.31089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073429Jy  sigma=1.477578
! Fit after  self-cal, rms=0.073428Jy  sigma=1.477522
! Inverting map 
! Added new window around map position (46.2, 46.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104022 Jy
! Component: 100  -  total flux cleaned = 0.00141308 Jy
! Component: 150  -  total flux cleaned = 0.0016811 Jy
! Component: 200  -  total flux cleaned = 0.00186205 Jy
! Total flux subtracted in 200 components = 0.00186205 Jy
! Clean residual min=-0.001976 max=0.001800 Jy/beam
! Clean residual mean=0.000013 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.312753 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 182 components and 0.312752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073348Jy  sigma=1.476493
! Fit after  self-cal, rms=0.073348Jy  sigma=1.476396
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073348Jy  sigma=1.476396
! Fit after  self-cal, rms=0.073630Jy  sigma=1.475983
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=2.436 mas, bpa=70.43 degrees
! Estimated noise=0.419588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000973418 Jy
! Component: 100  -  total flux cleaned = 0.0013229 Jy
! Component: 150  -  total flux cleaned = 0.00175882 Jy
! Component: 200  -  total flux cleaned = 0.00218152 Jy
! Total flux subtracted in 200 components = 0.00218152 Jy
! Clean residual min=-0.001819 max=0.001720 Jy/beam
! Clean residual mean=0.000030 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.314934 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 200 components and 0.314934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073606Jy  sigma=1.475538
! Fit after  self-cal, rms=0.073602Jy  sigma=1.475482
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507217 Jy
! Component: 100  -  total flux cleaned = 0.000948492 Jy
! Component: 150  -  total flux cleaned = 0.00130351 Jy
! Component: 200  -  total flux cleaned = 0.00158819 Jy
! Total flux subtracted in 200 components = 0.00158819 Jy
! Clean residual min=-0.001722 max=0.001681 Jy/beam
! Clean residual mean=0.000029 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.316522 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 206 components and 0.316522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073589Jy  sigma=1.475265
! Fit after  self-cal, rms=0.073588Jy  sigma=1.475248
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=1.85 mas, bpa=47.87 degrees
! Estimated noise=0.358822 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.066 x 1.85 at 47.87 degrees (North through East)
! Clean map  min=-0.0022139  max=0.20458 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7931 mas, bmaj=1.737 mas, bpa=46.29 degrees
! Estimated noise=0.732474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150851 Jy
! Component: 100  -  total flux cleaned = 0.201706 Jy
! Component: 150  -  total flux cleaned = 0.228375 Jy
! Component: 200  -  total flux cleaned = 0.246058 Jy
! Total flux subtracted in 200 components = 0.246058 Jy
! Clean residual min=-0.007390 max=0.009773 Jy/beam
! Clean residual mean=0.000031 rms=0.001923 Jy/beam
! Combined flux in latest and established models = 0.246058 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.246058 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=1.85 mas, bpa=47.87 degrees
! Estimated noise=0.358822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180344 Jy
! Component: 100  -  total flux cleaned = 0.0293277 Jy
! Component: 150  -  total flux cleaned = 0.0369422 Jy
! Component: 200  -  total flux cleaned = 0.0424372 Jy
! Total flux subtracted in 200 components = 0.0424372 Jy
! Clean residual min=-0.003194 max=0.004012 Jy/beam
! Clean residual mean=0.000024 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.288495 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 50 components and 0.288495 Jy
! Inverting map 
! Added new window around map position (13.6, -25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455252 Jy
! Component: 100  -  total flux cleaned = 0.00802835 Jy
! Component: 150  -  total flux cleaned = 0.01074 Jy
! Component: 200  -  total flux cleaned = 0.0128999 Jy
! Total flux subtracted in 200 components = 0.0128999 Jy
! Clean residual min=-0.002463 max=0.002403 Jy/beam
! Clean residual mean=0.000023 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.301395 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 78 components and 0.301395 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=2.436 mas, bpa=70.43 degrees
! Estimated noise=0.419588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293754 Jy
! Component: 100  -  total flux cleaned = 0.00465299 Jy
! Component: 150  -  total flux cleaned = 0.00562238 Jy
! Component: 200  -  total flux cleaned = 0.00640514 Jy
! Total flux subtracted in 200 components = 0.00640514 Jy
! Clean residual min=-0.002251 max=0.001906 Jy/beam
! Clean residual mean=0.000046 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.3078 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000602791 Jy
! Component: 100  -  total flux cleaned = 0.00126049 Jy
! Component: 150  -  total flux cleaned = 0.0019085 Jy
! Component: 200  -  total flux cleaned = 0.00242226 Jy
! Total flux subtracted in 200 components = 0.00242226 Jy
! Clean residual min=-0.002036 max=0.001766 Jy/beam
! Clean residual mean=0.000043 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.310222 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 122 components and 0.310222 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=1.85 mas, bpa=47.87 degrees
! Estimated noise=0.358822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000919149 Jy
! Component: 100  -  total flux cleaned = 0.0013297 Jy
! Component: 150  -  total flux cleaned = 0.00165829 Jy
! Component: 200  -  total flux cleaned = 0.00207202 Jy
! Total flux subtracted in 200 components = 0.00207202 Jy
! Clean residual min=-0.001986 max=0.001883 Jy/beam
! Clean residual mean=0.000017 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.312294 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 143 components and 0.312294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073652Jy  sigma=1.477187
! Fit after  self-cal, rms=0.073626Jy  sigma=1.476875
wmodel /J0132+5620_X_map.mod
! wmodel: Unable to open new model file: /J0132+5620_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0132+5620_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.066 x 1.85 at 47.87 degrees (North through East)
! Clean map  min=-0.0020584  max=0.20538 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0132+5620_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.205382 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00047337 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.691448 0.691448 1.3829 2.76579 5.53158 11.0632 22.1263 44.2527 88.5054
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.205 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  433.872 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0132+5620_X_dfm.log closed on Thu May 19 22:01:18 2016