! Started logfile: /scr/pima/bg219h_uvs/J0118-2141_S_uvs.log on Thu Apr  7 08:48:55 2016
obs /scr/pima/bg219h_uvs/J0118-2141_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0118-2141_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.714286 visibilities/baseline/integration-bin.
! Found source: J0118-2141
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 900 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0118-2141_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.426335Jy  sigma=28.444215
! Fit after  self-cal, rms=0.188813Jy  sigma=3.076478
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.777 mas, bmaj=12.55 mas, bpa=-11.66 degrees
! Estimated noise=1.85582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.748235 Jy
! Component: 100  -  total flux cleaned = 0.91374 Jy
! Total flux subtracted in 100 components = 0.91374 Jy
! Clean residual min=-0.039807 max=0.078797 Jy/beam
! Clean residual mean=-0.000239 rms=0.013156 Jy/beam
! Combined flux in latest and established models = 0.91374 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.91374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190001Jy  sigma=3.264486
! Fit after  self-cal, rms=0.189990Jy  sigma=3.264368
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.493 mas, bmaj=13.2 mas, bpa=-9.714 degrees
! Estimated noise=1.58511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-39.5, 79).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0784252 Jy
! Component: 100  -  total flux cleaned = 0.115117 Jy
! Component: 150  -  total flux cleaned = 0.137647 Jy
! Component: 200  -  total flux cleaned = 0.149538 Jy
! Total flux subtracted in 200 components = 0.149538 Jy
! Clean residual min=-0.025940 max=0.032884 Jy/beam
! Clean residual mean=0.000012 rms=0.007189 Jy/beam
! Combined flux in latest and established models = 1.06328 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 43 components and 1.06328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158174Jy  sigma=2.483330
! Fit after  self-cal, rms=0.156092Jy  sigma=2.439817
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.493 x 13.2 at -9.714 degrees (North through East)
! Clean map  min=-0.023074  max=0.93049 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00*    HN        1.08     KP        1.00     
!   LA        1.04     MK        1.00     NL        0.96     OV        0.95     
!   PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00*    HN        1.04     KP        0.98     
!   LA        1.05     MK        0.98     NL        1.12     OV        0.96     
!   PT        0.96     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00*    HN        1.03     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.05     OV        0.97     
!   PT        0.95     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.00*    HN        1.09     KP        0.98     
!   LA        1.03     MK        1.01     NL        0.93     OV        0.98     
!   PT        0.97     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.156092Jy  sigma=2.439817
! Fit after  self-cal, rms=0.142823Jy  sigma=2.003195
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.526 mas, bmaj=13.21 mas, bpa=-9.919 degrees
! Estimated noise=1.57639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00899765 Jy
! Component: 100  -  total flux cleaned = -0.0106173 Jy
! Component: 150  -  total flux cleaned = -0.0106099 Jy
! Component: 200  -  total flux cleaned = -0.0104743 Jy
! Total flux subtracted in 200 components = -0.0104743 Jy
! Clean residual min=-0.009024 max=0.009139 Jy/beam
! Clean residual mean=0.000003 rms=0.002539 Jy/beam
! Combined flux in latest and established models = 1.0528 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 1.0528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141884Jy  sigma=1.992150
! Fit after  self-cal, rms=0.141878Jy  sigma=1.991146
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141878Jy  sigma=1.991146
! Fit after  self-cal, rms=0.141555Jy  sigma=1.989320
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.53 mas, bmaj=13.21 mas, bpa=-9.915 degrees
! Estimated noise=1.57292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00467261 Jy
! Component: 100  -  total flux cleaned = -0.00546429 Jy
! Component: 150  -  total flux cleaned = -0.00525151 Jy
! Component: 200  -  total flux cleaned = -0.00504886 Jy
! Total flux subtracted in 200 components = -0.00504886 Jy
! Clean residual min=-0.009209 max=0.008699 Jy/beam
! Clean residual mean=0.000015 rms=0.002505 Jy/beam
! Combined flux in latest and established models = 1.04776 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 78 components and 1.04776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141168Jy  sigma=1.986729
! Fit after  self-cal, rms=0.141164Jy  sigma=1.986578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.18765e-05 Jy
! Component: 100  -  total flux cleaned = 0.000319769 Jy
! Component: 150  -  total flux cleaned = 0.000570804 Jy
! Component: 200  -  total flux cleaned = 0.000723888 Jy
! Total flux subtracted in 200 components = 0.000723888 Jy
! Clean residual min=-0.009133 max=0.008902 Jy/beam
! Clean residual mean=0.000017 rms=0.002470 Jy/beam
! Combined flux in latest and established models = 1.04848 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 1.04848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141059Jy  sigma=1.984468
! Fit after  self-cal, rms=0.141057Jy  sigma=1.984400
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141057Jy  sigma=1.984400
! Fit after  self-cal, rms=0.140781Jy  sigma=1.983355
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.533 mas, bmaj=13.22 mas, bpa=-9.905 degrees
! Estimated noise=1.56904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00348041 Jy
! Component: 100  -  total flux cleaned = -0.00429002 Jy
! Component: 150  -  total flux cleaned = -0.00459476 Jy
! Component: 200  -  total flux cleaned = -0.00452612 Jy
! Total flux subtracted in 200 components = -0.00452612 Jy
! Clean residual min=-0.009207 max=0.008758 Jy/beam
! Clean residual mean=0.000022 rms=0.002443 Jy/beam
! Combined flux in latest and established models = 1.04395 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 106 components and 1.04395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140514Jy  sigma=1.982983
! Fit after  self-cal, rms=0.140514Jy  sigma=1.982940
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.52224e-05 Jy
! Component: 100  -  total flux cleaned = 0.000200117 Jy
! Component: 150  -  total flux cleaned = 0.000317235 Jy
! Component: 200  -  total flux cleaned = 0.000427155 Jy
! Total flux subtracted in 200 components = 0.000427155 Jy
! Clean residual min=-0.009204 max=0.008806 Jy/beam
! Clean residual mean=0.000023 rms=0.002427 Jy/beam
! Combined flux in latest and established models = 1.04438 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 118 components and 1.04438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140458Jy  sigma=1.982001
! Fit after  self-cal, rms=0.140459Jy  sigma=1.981969
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140459Jy  sigma=1.981969
! Fit after  self-cal, rms=0.140153Jy  sigma=1.980873
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.082 mas, bmaj=20.58 mas, bpa=6.992 degrees
! Estimated noise=1.85848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00363411 Jy
! Component: 100  -  total flux cleaned = -0.00464617 Jy
! Component: 150  -  total flux cleaned = -0.00481784 Jy
! Component: 200  -  total flux cleaned = -0.00491992 Jy
! Total flux subtracted in 200 components = -0.00491992 Jy
! Clean residual min=-0.011905 max=0.010308 Jy/beam
! Clean residual mean=0.000055 rms=0.003305 Jy/beam
! Combined flux in latest and established models = 1.03946 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 143 components and 1.03946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139932Jy  sigma=1.981715
! Fit after  self-cal, rms=0.139926Jy  sigma=1.981623
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.41591e-05 Jy
! Component: 100  -  total flux cleaned = -0.000150462 Jy
! Component: 150  -  total flux cleaned = -0.000151612 Jy
! Component: 200  -  total flux cleaned = -0.0001101 Jy
! Total flux subtracted in 200 components = -0.0001101 Jy
! Clean residual min=-0.011919 max=0.010338 Jy/beam
! Clean residual mean=0.000054 rms=0.003276 Jy/beam
! Combined flux in latest and established models = 1.03935 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 152 components and 1.03935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139919Jy  sigma=1.981628
! Fit after  self-cal, rms=0.139915Jy  sigma=1.981576
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.537 mas, bmaj=13.23 mas, bpa=-9.889 degrees
! Estimated noise=1.56477 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.537 x 13.23 at -9.889 degrees (North through East)
! Clean map  min=-0.0089224  max=0.91627 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139915Jy  sigma=1.981576
! Fit after  self-cal, rms=0.133388Jy  sigma=1.849077
! Inverting map and beam 
! Estimated beam: bmin=3.544 mas, bmaj=13.27 mas, bpa=-9.803 degrees
! Estimated noise=1.53725 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0143497 Jy
! Component: 100  -  total flux cleaned = -0.0203411 Jy
! Component: 150  -  total flux cleaned = -0.0241212 Jy
! Component: 200  -  total flux cleaned = -0.0268254 Jy
! Total flux subtracted in 200 components = -0.0268254 Jy
! Clean residual min=-0.010467 max=0.014030 Jy/beam
! Clean residual mean=0.000086 rms=0.003646 Jy/beam
! Combined flux in latest and established models = 1.01253 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 185 components and 1.01252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130659Jy  sigma=1.834446
! Fit after  self-cal, rms=0.130650Jy  sigma=1.834193
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00222223 Jy
! Component: 100  -  total flux cleaned = -0.00358968 Jy
! Component: 150  -  total flux cleaned = -0.00401019 Jy
! Component: 200  -  total flux cleaned = -0.00425467 Jy
! Total flux subtracted in 200 components = -0.00425467 Jy
! Clean residual min=-0.010783 max=0.013807 Jy/beam
! Clean residual mean=0.000072 rms=0.003613 Jy/beam
! Combined flux in latest and established models = 1.00827 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 201 components and 1.00827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130467Jy  sigma=1.835121
! Fit after  self-cal, rms=0.130465Jy  sigma=1.835065
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130465Jy  sigma=1.835065
! Fit after  self-cal, rms=0.128794Jy  sigma=1.802702
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=12.59 mas, bpa=-11.7 degrees
! Estimated noise=1.77923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.717022 Jy
! Component: 100  -  total flux cleaned = 0.880064 Jy
! Component: 150  -  total flux cleaned = 0.935243 Jy
! Component: 200  -  total flux cleaned = 0.959098 Jy
! Total flux subtracted in 200 components = 0.959098 Jy
! Clean residual min=-0.015279 max=0.019015 Jy/beam
! Clean residual mean=-0.000012 rms=0.004629 Jy/beam
! Combined flux in latest and established models = 0.959098 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.959098 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.555 mas, bmaj=13.3 mas, bpa=-9.707 degrees
! Estimated noise=1.51345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151645 Jy
! Component: 100  -  total flux cleaned = 0.0183982 Jy
! Component: 150  -  total flux cleaned = 0.0209146 Jy
! Component: 200  -  total flux cleaned = 0.0220849 Jy
! Total flux subtracted in 200 components = 0.0220849 Jy
! Clean residual min=-0.012380 max=0.017006 Jy/beam
! Clean residual mean=0.000069 rms=0.004324 Jy/beam
! Combined flux in latest and established models = 0.981183 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.981183 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.085 mas, bmaj=20.78 mas, bpa=7.036 degrees
! Estimated noise=1.78812 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301159 Jy
! Component: 100  -  total flux cleaned = 0.00254534 Jy
! Component: 150  -  total flux cleaned = 0.00233564 Jy
! Component: 200  -  total flux cleaned = 0.00201705 Jy
! Total flux subtracted in 200 components = 0.00201705 Jy
! Clean residual min=-0.015050 max=0.022023 Jy/beam
! Clean residual mean=0.000149 rms=0.005843 Jy/beam
! Combined flux in latest and established models = 0.9832 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298873 Jy
! Component: 100  -  total flux cleaned = -0.000716051 Jy
! Component: 150  -  total flux cleaned = -0.000845951 Jy
! Component: 200  -  total flux cleaned = -0.00109671 Jy
! Total flux subtracted in 200 components = -0.00109671 Jy
! Clean residual min=-0.014818 max=0.021409 Jy/beam
! Clean residual mean=0.000142 rms=0.005688 Jy/beam
! Combined flux in latest and established models = 0.982104 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 66 components and 0.982104 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.555 mas, bmaj=13.3 mas, bpa=-9.707 degrees
! Estimated noise=1.51345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113064 Jy
! Component: 100  -  total flux cleaned = -0.000974281 Jy
! Component: 150  -  total flux cleaned = -0.000972577 Jy
! Component: 200  -  total flux cleaned = -0.00062724 Jy
! Total flux subtracted in 200 components = -0.00062724 Jy
! Clean residual min=-0.011264 max=0.015876 Jy/beam
! Clean residual mean=0.000070 rms=0.003855 Jy/beam
! Combined flux in latest and established models = 0.981476 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.981476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126945Jy  sigma=1.809775
! Fit after  self-cal, rms=0.126730Jy  sigma=1.804170
wmodel /scr/pima/bg219h_uvs/J0118-2141_S_map.mod
! Writing 90 model components to file: /scr/pima/bg219h_uvs/J0118-2141_S_map.mod
wobs /scr/pima/bg219h_uvs/J0118-2141_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0118-2141_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J0118-2141_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219h_uvs/J0118-2141_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00628089 Jy
! Component: 100  -  total flux cleaned = 0.011012 Jy
! Component: 150  -  total flux cleaned = 0.0124518 Jy
! Component: 200  -  total flux cleaned = 0.0138779 Jy
! Component: 250  -  total flux cleaned = 0.0146029 Jy
! Component: 300  -  total flux cleaned = 0.0150121 Jy
! Component: 350  -  total flux cleaned = 0.0157495 Jy
! Component: 400  -  total flux cleaned = 0.0162045 Jy
! Component: 450  -  total flux cleaned = 0.0162005 Jy
! Component: 500  -  total flux cleaned = 0.0161019 Jy
! Component: 550  -  total flux cleaned = 0.0161979 Jy
! Component: 600  -  total flux cleaned = 0.0159272 Jy
! Component: 650  -  total flux cleaned = 0.0160117 Jy
! Component: 700  -  total flux cleaned = 0.0160121 Jy
! Component: 750  -  total flux cleaned = 0.0163198 Jy
! Component: 800  -  total flux cleaned = 0.0160982 Jy
! Component: 850  -  total flux cleaned = 0.0159597 Jy
! Component: 900  -  total flux cleaned = 0.0157569 Jy
! Component: 950  -  total flux cleaned = 0.0154986 Jy
! Component: 1000  -  total flux cleaned = 0.0154374 Jy
! Component: 1050  -  total flux cleaned = 0.015376 Jy
! Component: 1100  -  total flux cleaned = 0.0152006 Jy
! Component: 1150  -  total flux cleaned = 0.0150334 Jy
! Component: 1200  -  total flux cleaned = 0.0149263 Jy
! Component: 1250  -  total flux cleaned = 0.0150305 Jy
! Component: 1300  -  total flux cleaned = 0.0150808 Jy
! Component: 1350  -  total flux cleaned = 0.015081 Jy
! Component: 1400  -  total flux cleaned = 0.0150809 Jy
! Component: 1450  -  total flux cleaned = 0.0149866 Jy
! Component: 1500  -  total flux cleaned = 0.0148061 Jy
! Component: 1550  -  total flux cleaned = 0.0148052 Jy
! Component: 1600  -  total flux cleaned = 0.0147181 Jy
! Component: 1650  -  total flux cleaned = 0.014551 Jy
! Component: 1700  -  total flux cleaned = 0.0145929 Jy
! Component: 1750  -  total flux cleaned = 0.014512 Jy
! Component: 1800  -  total flux cleaned = 0.0143154 Jy
! Component: 1850  -  total flux cleaned = 0.0143159 Jy
! Component: 1900  -  total flux cleaned = 0.0142025 Jy
! Component: 1950  -  total flux cleaned = 0.013943 Jy
! Component: 2000  -  total flux cleaned = 0.0138704 Jy
! Component: 2050  -  total flux cleaned = 0.0137262 Jy
! Component: 2100  -  total flux cleaned = 0.0135489 Jy
! Component: 2150  -  total flux cleaned = 0.0133747 Jy
! Component: 2200  -  total flux cleaned = 0.0132712 Jy
! Component: 2250  -  total flux cleaned = 0.0131691 Jy
! Component: 2300  -  total flux cleaned = 0.013001 Jy
! Component: 2350  -  total flux cleaned = 0.0128681 Jy
! Component: 2400  -  total flux cleaned = 0.0128023 Jy
! Component: 2450  -  total flux cleaned = 0.0128022 Jy
! Component: 2500  -  total flux cleaned = 0.012706 Jy
! Component: 2550  -  total flux cleaned = 0.0126425 Jy
! Component: 2600  -  total flux cleaned = 0.0125165 Jy
! Component: 2650  -  total flux cleaned = 0.0123919 Jy
! Component: 2700  -  total flux cleaned = 0.0122995 Jy
! Component: 2750  -  total flux cleaned = 0.0122073 Jy
! Component: 2800  -  total flux cleaned = 0.012177 Jy
! Component: 2850  -  total flux cleaned = 0.0120559 Jy
! Component: 2900  -  total flux cleaned = 0.0120257 Jy
! Component: 2950  -  total flux cleaned = 0.0119358 Jy
! Component: 3000  -  total flux cleaned = 0.0118467 Jy
! Component: 3050  -  total flux cleaned = 0.0117285 Jy
! Component: 3100  -  total flux cleaned = 0.0116991 Jy
! Component: 3150  -  total flux cleaned = 0.011699 Jy
! Component: 3200  -  total flux cleaned = 0.0116406 Jy
! Component: 3250  -  total flux cleaned = 0.0115245 Jy
! Component: 3300  -  total flux cleaned = 0.0114956 Jy
! Component: 3350  -  total flux cleaned = 0.01138 Jy
! Component: 3400  -  total flux cleaned = 0.011235 Jy
! Component: 3450  -  total flux cleaned = 0.0111479 Jy
! Component: 3500  -  total flux cleaned = 0.0110608 Jy
! Component: 3550  -  total flux cleaned = 0.0109735 Jy
! Component: 3600  -  total flux cleaned = 0.0108863 Jy
! Component: 3650  -  total flux cleaned = 0.0107988 Jy
! Component: 3700  -  total flux cleaned = 0.0107406 Jy
! Component: 3750  -  total flux cleaned = 0.0105945 Jy
! Component: 3800  -  total flux cleaned = 0.0104775 Jy
! Component: 3850  -  total flux cleaned = 0.0103605 Jy
! Component: 3900  -  total flux cleaned = 0.0102136 Jy
! Component: 3950  -  total flux cleaned = 0.010184 Jy
! Component: 4000  -  total flux cleaned = 0.0100659 Jy
! Component: 4050  -  total flux cleaned = 0.010066 Jy
! Total flux subtracted in 4096 components = 0.00994718 Jy
! Clean residual min=-0.001771 max=0.001981 Jy/beam
! Clean residual mean=-0.000014 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.991424 Jy
keep
! Adding 369 model components to the UV plane model.
! The established model now contains 459 components and 0.991424 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0118-2141_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.555 x 13.3 at -9.707 degrees (North through East)
! Clean map  min=-0.011042  max=0.87541 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0118-2141_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.875408 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00051553 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.176671 0.176671 0.353342 0.706683 1.41337 2.82673 5.65346 11.3069 22.6139 45.2277 90.4554
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.875 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1698.07 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0118-2141_S_uvs.log closed on Thu Apr  7 08:48:59 2016