! Started logfile: /scr/pima/bg219h_uvs/J0105+5125_S_dfm.log on Thu May 19 22:00:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J0105+5125_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0105+5125_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.696296 visibilities/baseline/integration-bin.
! Found source: J0105+5125
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7144 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0105+5125_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042487Jy  sigma=23.406418
! Fit after  self-cal, rms=0.735414Jy  sigma=16.923412
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.001 mas, bmaj=6.148 mas, bpa=36.75 degrees
! Estimated noise=0.709776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204286 Jy
! Component: 100  -  total flux cleaned = 0.303669 Jy
! Total flux subtracted in 100 components = 0.303669 Jy
! Clean residual min=-0.029236 max=0.052193 Jy/beam
! Clean residual mean=-0.000125 rms=0.008619 Jy/beam
! Combined flux in latest and established models = 0.303669 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.303669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155881Jy  sigma=3.334492
! Fit after  self-cal, rms=0.149898Jy  sigma=3.201033
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0713073 Jy
! Component: 100  -  total flux cleaned = 0.111036 Jy
! Total flux subtracted in 100 components = 0.111036 Jy
! Clean residual min=-0.019230 max=0.022466 Jy/beam
! Clean residual mean=-0.000066 rms=0.004556 Jy/beam
! Combined flux in latest and established models = 0.414705 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.414705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097280Jy  sigma=2.047837
! Fit after  self-cal, rms=0.093626Jy  sigma=1.969054
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310491 Jy
! Component: 100  -  total flux cleaned = 0.0475969 Jy
! Total flux subtracted in 100 components = 0.0475969 Jy
! Clean residual min=-0.012107 max=0.022541 Jy/beam
! Clean residual mean=-0.000041 rms=0.002965 Jy/beam
! Combined flux in latest and established models = 0.462302 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.462302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078486Jy  sigma=1.639692
! Fit after  self-cal, rms=0.077336Jy  sigma=1.616177
! Inverting map 
! Added new window around map position (9, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203993 Jy
! Component: 100  -  total flux cleaned = 0.0329208 Jy
! Total flux subtracted in 100 components = 0.0329208 Jy
! Clean residual min=-0.007506 max=0.008772 Jy/beam
! Clean residual mean=-0.000022 rms=0.001963 Jy/beam
! Combined flux in latest and established models = 0.495223 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 34 components and 0.495223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070407Jy  sigma=1.455333
! Fit after  self-cal, rms=0.070123Jy  sigma=1.450236
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.647 mas, bmaj=6.816 mas, bpa=35.28 degrees
! Estimated noise=0.42015 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137553 Jy
! Component: 100  -  total flux cleaned = 0.0227671 Jy
! Component: 150  -  total flux cleaned = 0.0291524 Jy
! Component: 200  -  total flux cleaned = 0.0326334 Jy
! Total flux subtracted in 200 components = 0.0326334 Jy
! Clean residual min=-0.006298 max=0.006484 Jy/beam
! Clean residual mean=-0.000008 rms=0.001753 Jy/beam
! Combined flux in latest and established models = 0.527856 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 58 components and 0.527856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066551Jy  sigma=1.375794
! Fit after  self-cal, rms=0.066436Jy  sigma=1.373687
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.647 x 6.816 at 35.28 degrees (North through East)
! Clean map  min=-0.0064483  max=0.23722 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        0.99     KP        1.00     
!   LA        1.00     MK        0.99     NL        0.98     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        0.99     KP        1.00     
!   LA        0.99     MK        0.99     NL        0.95     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.01     KP        1.01     
!   LA        1.00     MK        1.08     NL        0.84     OV        1.00     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00*    HN        1.03     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.02     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.066436Jy  sigma=1.373687
! Fit after  self-cal, rms=0.061909Jy  sigma=1.312952
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.679 mas, bmaj=6.846 mas, bpa=35.14 degrees
! Estimated noise=0.419656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453148 Jy
! Component: 100  -  total flux cleaned = 0.00637935 Jy
! Component: 150  -  total flux cleaned = 0.00731564 Jy
! Component: 200  -  total flux cleaned = 0.00786801 Jy
! Total flux subtracted in 200 components = 0.00786801 Jy
! Clean residual min=-0.004066 max=0.004817 Jy/beam
! Clean residual mean=0.000004 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.535724 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 0.535724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061540Jy  sigma=1.302935
! Fit after  self-cal, rms=0.061520Jy  sigma=1.302358
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061520Jy  sigma=1.302358
! Fit after  self-cal, rms=0.060045Jy  sigma=1.272198
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.676 mas, bmaj=6.837 mas, bpa=35.35 degrees
! Estimated noise=0.421728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00154699 Jy
! Component: 100  -  total flux cleaned = -0.00111017 Jy
! Component: 150  -  total flux cleaned = -0.000877531 Jy
! Component: 200  -  total flux cleaned = -0.000631598 Jy
! Total flux subtracted in 200 components = -0.000631598 Jy
! Clean residual min=-0.002327 max=0.002720 Jy/beam
! Clean residual mean=0.000003 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.535093 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.535093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059911Jy  sigma=1.268953
! Fit after  self-cal, rms=0.059886Jy  sigma=1.268443
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000973266 Jy
! Component: 100  -  total flux cleaned = 0.000496488 Jy
! Component: 150  -  total flux cleaned = 4.82147e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101605 Jy
! Total flux subtracted in 200 components = -0.000101605 Jy
! Clean residual min=-0.002021 max=0.002563 Jy/beam
! Clean residual mean=0.000003 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.534991 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 0.534991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059733Jy  sigma=1.264847
! Fit after  self-cal, rms=0.059725Jy  sigma=1.264575
! Inverting map 
! Added new window around map position (112.5, 80).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734902 Jy
! Component: 100  -  total flux cleaned = 0.000521149 Jy
! Component: 150  -  total flux cleaned = 0.000378461 Jy
! Component: 200  -  total flux cleaned = 0.000252131 Jy
! Total flux subtracted in 200 components = 0.000252131 Jy
! Clean residual min=-0.001888 max=0.002125 Jy/beam
! Clean residual mean=0.000004 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.535243 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 122 components and 0.535243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059595Jy  sigma=1.261864
! Fit after  self-cal, rms=0.059591Jy  sigma=1.261693
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059591Jy  sigma=1.261693
! Fit after  self-cal, rms=0.059499Jy  sigma=1.261422
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.672 mas, bmaj=6.833 mas, bpa=35.38 degrees
! Estimated noise=0.421885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.36218e-05 Jy
! Component: 100  -  total flux cleaned = -0.000235378 Jy
! Component: 150  -  total flux cleaned = -0.000385215 Jy
! Component: 200  -  total flux cleaned = -0.000348356 Jy
! Total flux subtracted in 200 components = -0.000348356 Jy
! Clean residual min=-0.001716 max=0.001959 Jy/beam
! Clean residual mean=0.000004 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.534895 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 132 components and 0.534895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059447Jy  sigma=1.260311
! Fit after  self-cal, rms=0.059445Jy  sigma=1.260268
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151923 Jy
! Component: 100  -  total flux cleaned = -0.000120624 Jy
! Component: 150  -  total flux cleaned = -0.000120637 Jy
! Component: 200  -  total flux cleaned = -0.000119972 Jy
! Total flux subtracted in 200 components = -0.000119972 Jy
! Clean residual min=-0.001637 max=0.001944 Jy/beam
! Clean residual mean=0.000004 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.534775 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 137 components and 0.534775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059413Jy  sigma=1.259630
! Fit after  self-cal, rms=0.059413Jy  sigma=1.259607
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059413Jy  sigma=1.259607
! Fit after  self-cal, rms=0.059395Jy  sigma=1.259537
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.085 mas, bmaj=8.45 mas, bpa=26.46 degrees
! Estimated noise=0.520004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116108 Jy
! Component: 100  -  total flux cleaned = -9.65129e-05 Jy
! Component: 150  -  total flux cleaned = -0.000225387 Jy
! Component: 200  -  total flux cleaned = -0.00024763 Jy
! Total flux subtracted in 200 components = -0.00024763 Jy
! Clean residual min=-0.001664 max=0.001800 Jy/beam
! Clean residual mean=0.000003 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.534527 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 161 components and 0.534527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059389Jy  sigma=1.259251
! Fit after  self-cal, rms=0.059387Jy  sigma=1.259232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133532 Jy
! Component: 100  -  total flux cleaned = -0.000152766 Jy
! Component: 150  -  total flux cleaned = -0.000171869 Jy
! Component: 200  -  total flux cleaned = -0.000240326 Jy
! Total flux subtracted in 200 components = -0.000240326 Jy
! Clean residual min=-0.001619 max=0.001754 Jy/beam
! Clean residual mean=0.000003 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.534287 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 175 components and 0.534287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059384Jy  sigma=1.259121
! Fit after  self-cal, rms=0.059384Jy  sigma=1.259112
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.67 mas, bmaj=6.83 mas, bpa=35.4 degrees
! Estimated noise=0.422088 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.67 x 6.83 at 35.4 degrees (North through East)
! Clean map  min=-0.0027575  max=0.23698 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.012 mas, bmaj=6.167 mas, bpa=36.86 degrees
! Estimated noise=0.71862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.217551 Jy
! Component: 100  -  total flux cleaned = 0.323533 Jy
! Component: 150  -  total flux cleaned = 0.382504 Jy
! Component: 200  -  total flux cleaned = 0.419785 Jy
! Total flux subtracted in 200 components = 0.419785 Jy
! Clean residual min=-0.011611 max=0.020385 Jy/beam
! Clean residual mean=-0.000064 rms=0.003305 Jy/beam
! Combined flux in latest and established models = 0.419785 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.419785 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.67 mas, bmaj=6.83 mas, bpa=35.4 degrees
! Estimated noise=0.422088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0347927 Jy
! Component: 100  -  total flux cleaned = 0.057895 Jy
! Component: 150  -  total flux cleaned = 0.0737335 Jy
! Component: 200  -  total flux cleaned = 0.0847696 Jy
! Total flux subtracted in 200 components = 0.0847696 Jy
! Clean residual min=-0.004338 max=0.006173 Jy/beam
! Clean residual mean=-0.000052 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 0.504554 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.504554 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00792368 Jy
! Component: 100  -  total flux cleaned = 0.0137429 Jy
! Component: 150  -  total flux cleaned = 0.0181177 Jy
! Component: 200  -  total flux cleaned = 0.0209002 Jy
! Total flux subtracted in 200 components = 0.0209002 Jy
! Clean residual min=-0.002724 max=0.002711 Jy/beam
! Clean residual mean=-0.000016 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.525455 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 66 components and 0.525455 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.085 mas, bmaj=8.45 mas, bpa=26.46 degrees
! Estimated noise=0.520004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00426795 Jy
! Component: 100  -  total flux cleaned = 0.00627318 Jy
! Component: 150  -  total flux cleaned = 0.00736378 Jy
! Component: 200  -  total flux cleaned = 0.00793889 Jy
! Total flux subtracted in 200 components = 0.00793889 Jy
! Clean residual min=-0.002106 max=0.002091 Jy/beam
! Clean residual mean=-0.000004 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.533394 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159903 Jy
! Component: 100  -  total flux cleaned = 0.000302608 Jy
! Component: 150  -  total flux cleaned = 0.000429391 Jy
! Component: 200  -  total flux cleaned = 0.000429514 Jy
! Total flux subtracted in 200 components = 0.000429514 Jy
! Clean residual min=-0.001860 max=0.001855 Jy/beam
! Clean residual mean=-0.000001 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.533823 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 137 components and 0.533823 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.67 mas, bmaj=6.83 mas, bpa=35.4 degrees
! Estimated noise=0.422088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16956e-05 Jy
! Component: 100  -  total flux cleaned = 0.000132685 Jy
! Component: 150  -  total flux cleaned = 0.000134004 Jy
! Component: 200  -  total flux cleaned = 0.000135694 Jy
! Total flux subtracted in 200 components = 0.000135694 Jy
! Clean residual min=-0.001860 max=0.001869 Jy/beam
! Clean residual mean=0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.533959 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 159 components and 0.533959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059446Jy  sigma=1.260532
! Fit after  self-cal, rms=0.059421Jy  sigma=1.260057
wmodel /J0105+5125_S_map.mod
! wmodel: Unable to open new model file: /J0105+5125_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0105+5125_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.67 x 6.83 at 35.4 degrees (North through East)
! Clean map  min=-0.0026418  max=0.23589 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0105+5125_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.235887 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000457707 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.582109 0.582109 1.16422 2.32843 4.65687 9.31374 18.6275 37.2549 74.5099
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.235 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  515.367 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0105+5125_S_dfm.log closed on Thu May 19 22:00:50 2016