! Started logfile: /scr/pima/bg219h_uvs/J0006+2422_X_dfm.log on Thu May 19 22:00:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0006+2422_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0006+2422_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.890515 visibilities/baseline/integration-bin.
! Found source: J0006+2422
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19716 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0006+2422_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017232Jy  sigma=24.277240
! Fit after  self-cal, rms=0.802086Jy  sigma=19.117528
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7073 mas, bmaj=1.554 mas, bpa=-0.5269 degrees
! Estimated noise=0.435086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150942 Jy
! Component: 100  -  total flux cleaned = 0.1864 Jy
! Total flux subtracted in 100 components = 0.1864 Jy
! Clean residual min=-0.007689 max=0.025443 Jy/beam
! Clean residual mean=0.000003 rms=0.001927 Jy/beam
! Combined flux in latest and established models = 0.1864 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.1864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075747Jy  sigma=1.692648
! Fit after  self-cal, rms=0.075653Jy  sigma=1.691162
! Inverting map 
! Added new window around map position (1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225588 Jy
! Component: 100  -  total flux cleaned = 0.034531 Jy
! Total flux subtracted in 100 components = 0.034531 Jy
! Clean residual min=-0.004848 max=0.006554 Jy/beam
! Clean residual mean=0.000002 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.220931 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 12 components and 0.220931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067358Jy  sigma=1.474535
! Fit after  self-cal, rms=0.067041Jy  sigma=1.467608
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818633 Jy
! Component: 100  -  total flux cleaned = 0.0135251 Jy
! Total flux subtracted in 100 components = 0.0135251 Jy
! Clean residual min=-0.004010 max=0.004560 Jy/beam
! Clean residual mean=0.000001 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.234456 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.234456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065569Jy  sigma=1.428536
! Fit after  self-cal, rms=0.065528Jy  sigma=1.427559
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9148 mas, bmaj=1.907 mas, bpa=-1.979 degrees
! Estimated noise=0.22028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00608284 Jy
! Component: 100  -  total flux cleaned = 0.0097592 Jy
! Component: 150  -  total flux cleaned = 0.0121718 Jy
! Component: 200  -  total flux cleaned = 0.0138345 Jy
! Total flux subtracted in 200 components = 0.0138345 Jy
! Clean residual min=-0.002791 max=0.003317 Jy/beam
! Clean residual mean=0.000000 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.248291 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 47 components and 0.248291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064910Jy  sigma=1.411874
! Fit after  self-cal, rms=0.064901Jy  sigma=1.411558
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9148 x 1.907 at -1.979 degrees (North through East)
! Clean map  min=-0.0024998  max=0.19842 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.96     MK        0.99     NL        1.01     OV        1.03     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.96     MK        1.00     NL        1.01     OV        1.01     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.97     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.06     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.08     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.97     
!   LA        0.96     MK        1.00     NL        0.99     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.97     MK        0.97     NL        0.99     OV        1.01     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.99     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.03     KP        0.98     
!   LA        0.97     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.99     KP        0.99     
!   LA        0.95     MK        0.98     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.064901Jy  sigma=1.411558
! Fit after  self-cal, rms=0.064814Jy  sigma=1.406162
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9152 mas, bmaj=1.907 mas, bpa=-1.87 degrees
! Estimated noise=0.219413 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626748 Jy
! Component: 100  -  total flux cleaned = 0.000669514 Jy
! Component: 150  -  total flux cleaned = 0.000740392 Jy
! Component: 200  -  total flux cleaned = 0.000804185 Jy
! Total flux subtracted in 200 components = 0.000804185 Jy
! Clean residual min=-0.002243 max=0.002732 Jy/beam
! Clean residual mean=-0.000000 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.249095 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.249095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064756Jy  sigma=1.405331
! Fit after  self-cal, rms=0.064765Jy  sigma=1.405274
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064765Jy  sigma=1.405274
! Fit after  self-cal, rms=0.064291Jy  sigma=1.391916
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9181 mas, bmaj=1.901 mas, bpa=-1.933 degrees
! Estimated noise=0.219392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000648788 Jy
! Component: 100  -  total flux cleaned = 0.000765828 Jy
! Component: 150  -  total flux cleaned = 0.00076567 Jy
! Component: 200  -  total flux cleaned = 0.000765753 Jy
! Total flux subtracted in 200 components = 0.000765753 Jy
! Clean residual min=-0.001522 max=0.001547 Jy/beam
! Clean residual mean=-0.000003 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.24986 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.24986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064275Jy  sigma=1.391554
! Fit after  self-cal, rms=0.064280Jy  sigma=1.391475
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19.4, 30.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113192 Jy
! Component: 100  -  total flux cleaned = 0.00118688 Jy
! Component: 150  -  total flux cleaned = 0.00122811 Jy
! Component: 200  -  total flux cleaned = 0.00120864 Jy
! Total flux subtracted in 200 components = 0.00120864 Jy
! Clean residual min=-0.001511 max=0.001337 Jy/beam
! Clean residual mean=-0.000003 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.251069 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.251069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064250Jy  sigma=1.390778
! Fit after  self-cal, rms=0.064248Jy  sigma=1.390745
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064248Jy  sigma=1.390745
! Fit after  self-cal, rms=0.064202Jy  sigma=1.390689
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9181 mas, bmaj=1.901 mas, bpa=-1.92 degrees
! Estimated noise=0.21933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314999 Jy
! Component: 100  -  total flux cleaned = 0.000407571 Jy
! Component: 150  -  total flux cleaned = 0.000424613 Jy
! Component: 200  -  total flux cleaned = 0.000409361 Jy
! Total flux subtracted in 200 components = 0.000409361 Jy
! Clean residual min=-0.001504 max=0.001293 Jy/beam
! Clean residual mean=-0.000003 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.251479 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 0.251479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064192Jy  sigma=1.390471
! Fit after  self-cal, rms=0.064191Jy  sigma=1.390463
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.78265e-07 Jy
! Component: 100  -  total flux cleaned = -1.47571e-05 Jy
! Component: 150  -  total flux cleaned = -2.88465e-05 Jy
! Component: 200  -  total flux cleaned = -6.8721e-05 Jy
! Total flux subtracted in 200 components = -6.8721e-05 Jy
! Clean residual min=-0.001516 max=0.001288 Jy/beam
! Clean residual mean=-0.000003 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.25141 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.25141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064185Jy  sigma=1.390330
! Fit after  self-cal, rms=0.064185Jy  sigma=1.390325
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064185Jy  sigma=1.390325
! Fit after  self-cal, rms=0.064163Jy  sigma=1.390308
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=2.855 mas, bpa=-4.842 degrees
! Estimated noise=0.272746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209696 Jy
! Component: 100  -  total flux cleaned = -0.000221308 Jy
! Component: 150  -  total flux cleaned = -0.000242154 Jy
! Component: 200  -  total flux cleaned = -0.000271006 Jy
! Total flux subtracted in 200 components = -0.000271006 Jy
! Clean residual min=-0.001722 max=0.001522 Jy/beam
! Clean residual mean=-0.000007 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.251139 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 95 components and 0.251139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064161Jy  sigma=1.390288
! Fit after  self-cal, rms=0.064160Jy  sigma=1.390282
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.28416e-05 Jy
! Component: 100  -  total flux cleaned = -5.00776e-05 Jy
! Component: 150  -  total flux cleaned = -5.79435e-05 Jy
! Component: 200  -  total flux cleaned = -6.50824e-05 Jy
! Total flux subtracted in 200 components = -6.50824e-05 Jy
! Clean residual min=-0.001728 max=0.001519 Jy/beam
! Clean residual mean=-0.000007 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.251074 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 101 components and 0.251074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064160Jy  sigma=1.390283
! Fit after  self-cal, rms=0.064160Jy  sigma=1.390283
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9182 mas, bmaj=1.9 mas, bpa=-1.916 degrees
! Estimated noise=0.219299 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9182 x 1.9 at -1.916 degrees (North through East)
! Clean map  min=-0.0014466  max=0.19745 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7077 mas, bmaj=1.545 mas, bpa=-0.4837 degrees
! Estimated noise=0.434123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150368 Jy
! Component: 100  -  total flux cleaned = 0.189088 Jy
! Component: 150  -  total flux cleaned = 0.209863 Jy
! Component: 200  -  total flux cleaned = 0.22203 Jy
! Total flux subtracted in 200 components = 0.22203 Jy
! Clean residual min=-0.003758 max=0.006236 Jy/beam
! Clean residual mean=-0.000001 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.22203 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.22203 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9182 mas, bmaj=1.9 mas, bpa=-1.916 degrees
! Estimated noise=0.219299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106862 Jy
! Component: 100  -  total flux cleaned = 0.0166927 Jy
! Component: 150  -  total flux cleaned = 0.0204501 Jy
! Component: 200  -  total flux cleaned = 0.0229608 Jy
! Total flux subtracted in 200 components = 0.0229608 Jy
! Clean residual min=-0.001646 max=0.001776 Jy/beam
! Clean residual mean=-0.000003 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.24499 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.24499 Jy
! Inverting map 
! Added new window around map position (-12, 26.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019359 Jy
! Component: 100  -  total flux cleaned = 0.00337512 Jy
! Component: 150  -  total flux cleaned = 0.00438452 Jy
! Component: 200  -  total flux cleaned = 0.00510315 Jy
! Total flux subtracted in 200 components = 0.00510315 Jy
! Clean residual min=-0.001498 max=0.001230 Jy/beam
! Clean residual mean=-0.000003 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.250094 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 64 components and 0.250093 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=2.855 mas, bpa=-4.842 degrees
! Estimated noise=0.272746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000882073 Jy
! Component: 100  -  total flux cleaned = 0.00108772 Jy
! Component: 150  -  total flux cleaned = 0.00122918 Jy
! Component: 200  -  total flux cleaned = 0.00130774 Jy
! Total flux subtracted in 200 components = 0.00130774 Jy
! Clean residual min=-0.001562 max=0.001498 Jy/beam
! Clean residual mean=-0.000007 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.251401 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.85416e-05 Jy
! Component: 100  -  total flux cleaned = 0.000142108 Jy
! Component: 150  -  total flux cleaned = 0.000180519 Jy
! Component: 200  -  total flux cleaned = 0.000203974 Jy
! Total flux subtracted in 200 components = 0.000203974 Jy
! Clean residual min=-0.001568 max=0.001483 Jy/beam
! Clean residual mean=-0.000006 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.251605 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 97 components and 0.251605 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9182 mas, bmaj=1.9 mas, bpa=-1.916 degrees
! Estimated noise=0.219299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112937 Jy
! Component: 100  -  total flux cleaned = 0.000135659 Jy
! Component: 150  -  total flux cleaned = 0.000177886 Jy
! Component: 200  -  total flux cleaned = 0.000216595 Jy
! Total flux subtracted in 200 components = 0.000216595 Jy
! Clean residual min=-0.001492 max=0.001212 Jy/beam
! Clean residual mean=-0.000003 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.251822 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 117 components and 0.251822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064144Jy  sigma=1.389788
! Fit after  self-cal, rms=0.064138Jy  sigma=1.389711
wmodel /J0006+2422_X_map.mod
! wmodel: Unable to open new model file: /J0006+2422_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0006+2422_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9182 x 1.9 at -1.916 degrees (North through East)
! Clean map  min=-0.0013963  max=0.19757 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0006+2422_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.197572 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297906 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.452349 0.452349 0.904699 1.8094 3.6188 7.23759 14.4752 28.9504 57.9007
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.197 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  663.204 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0006+2422_X_dfm.log closed on Thu May 19 22:00:22 2016