! Started logfile: /scr/pima/bg219g_uvs/J1813+0615_S_uvs.log on Thu Apr 7 07:22:09 2016 obs /scr/pima/bg219g_uvs/J1813+0615_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1813+0615_S_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895652 visibilities/baseline/integration-bin. ! Found source: J1813+0615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 3708 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1813+0615_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.029212Jy sigma=23.058257 ! Fit after self-cal, rms=0.806945Jy sigma=18.049853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=6.709 mas, bpa=2.183 degrees ! Estimated noise=0.67395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151537 Jy ! Component: 100 - total flux cleaned = 0.185274 Jy ! Total flux subtracted in 100 components = 0.185274 Jy ! Clean residual min=-0.010568 max=0.017557 Jy/beam ! Clean residual mean=0.000018 rms=0.003230 Jy/beam ! Combined flux in latest and established models = 0.185274 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.185274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097534Jy sigma=2.076929 ! Fit after self-cal, rms=0.097418Jy sigma=2.075598 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=7.769 mas, bpa=-0.2682 degrees ! Estimated noise=0.541623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49, 74.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223044 Jy ! Component: 100 - total flux cleaned = 0.0338951 Jy ! Component: 150 - total flux cleaned = 0.0413898 Jy ! Component: 200 - total flux cleaned = 0.0466531 Jy ! Total flux subtracted in 200 components = 0.0466531 Jy ! Clean residual min=-0.009810 max=0.010866 Jy/beam ! Clean residual mean=0.000012 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.231927 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 0.231927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092955Jy sigma=1.938000 ! Fit after self-cal, rms=0.092659Jy sigma=1.928029 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.401 x 7.769 at -0.2682 degrees (North through East) ! Clean map min=-0.008189 max=0.19355 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.98 KP 0.97 ! LA 0.97 MK 1.03 NL 0.89 OV 1.02 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.092659Jy sigma=1.928029 ! Fit after self-cal, rms=0.092272Jy sigma=1.921940 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=7.77 mas, bpa=-0.1753 degrees ! Estimated noise=0.53748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440265 Jy ! Component: 100 - total flux cleaned = 0.00503541 Jy ! Component: 150 - total flux cleaned = 0.00563922 Jy ! Component: 200 - total flux cleaned = 0.00598437 Jy ! Total flux subtracted in 200 components = 0.00598437 Jy ! Clean residual min=-0.007651 max=0.009065 Jy/beam ! Clean residual mean=0.000010 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.237911 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.237911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091993Jy sigma=1.912784 ! Fit after self-cal, rms=0.091976Jy sigma=1.911649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091976Jy sigma=1.911649 ! Fit after self-cal, rms=0.091435Jy sigma=1.911012 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=7.762 mas, bpa=-0.1447 degrees ! Estimated noise=0.537929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183387 Jy ! Component: 100 - total flux cleaned = 0.00217939 Jy ! Component: 150 - total flux cleaned = 0.00233085 Jy ! Component: 200 - total flux cleaned = 0.00226736 Jy ! Total flux subtracted in 200 components = 0.00226736 Jy ! Clean residual min=-0.007377 max=0.008858 Jy/beam ! Clean residual mean=0.000010 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.240179 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.240179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091310Jy sigma=1.906902 ! Fit after self-cal, rms=0.091287Jy sigma=1.906449 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -110). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00734229 Jy ! Component: 100 - total flux cleaned = 0.00878152 Jy ! Component: 150 - total flux cleaned = 0.00880761 Jy ! Component: 200 - total flux cleaned = 0.0088132 Jy ! Total flux subtracted in 200 components = 0.0088132 Jy ! Clean residual min=-0.006699 max=0.005488 Jy/beam ! Clean residual mean=0.000012 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.248992 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 0.248992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090644Jy sigma=1.891144 ! Fit after self-cal, rms=0.090556Jy sigma=1.889903 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090556Jy sigma=1.889903 ! Fit after self-cal, rms=0.090538Jy sigma=1.881529 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=7.754 mas, bpa=-0.2221 degrees ! Estimated noise=0.538881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223056 Jy ! Component: 100 - total flux cleaned = 0.0023215 Jy ! Component: 150 - total flux cleaned = 0.00225215 Jy ! Component: 200 - total flux cleaned = 0.00218671 Jy ! Total flux subtracted in 200 components = 0.00218671 Jy ! Clean residual min=-0.005151 max=0.004489 Jy/beam ! Clean residual mean=0.000011 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.251179 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 0.251179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090416Jy sigma=1.878274 ! Fit after self-cal, rms=0.090391Jy sigma=1.878005 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99482e-05 Jy ! Component: 100 - total flux cleaned = -3.71634e-05 Jy ! Component: 150 - total flux cleaned = 1.70035e-05 Jy ! Component: 200 - total flux cleaned = 1.63187e-05 Jy ! Total flux subtracted in 200 components = 1.63187e-05 Jy ! Clean residual min=-0.004962 max=0.004297 Jy/beam ! Clean residual mean=0.000011 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.251195 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 122 components and 0.251195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090328Jy sigma=1.876555 ! Fit after self-cal, rms=0.090320Jy sigma=1.876521 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090320Jy sigma=1.876521 ! Fit after self-cal, rms=0.089873Jy sigma=1.876125 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.369 mas, bmaj=11.65 mas, bpa=-10.64 degrees ! Estimated noise=0.664418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242858 Jy ! Component: 100 - total flux cleaned = -0.000764281 Jy ! Component: 150 - total flux cleaned = -0.0012097 Jy ! Component: 200 - total flux cleaned = -0.00159275 Jy ! Total flux subtracted in 200 components = -0.00159275 Jy ! Clean residual min=-0.006262 max=0.004845 Jy/beam ! Clean residual mean=0.000019 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.249602 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 136 components and 0.249602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089896Jy sigma=1.875550 ! Fit after self-cal, rms=0.089871Jy sigma=1.875333 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.26523e-05 Jy ! Component: 100 - total flux cleaned = -0.000211441 Jy ! Component: 150 - total flux cleaned = -0.000340512 Jy ! Component: 200 - total flux cleaned = -0.000300536 Jy ! Total flux subtracted in 200 components = -0.000300536 Jy ! Clean residual min=-0.006208 max=0.004694 Jy/beam ! Clean residual mean=0.000020 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.249302 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 0.249302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089907Jy sigma=1.875363 ! Fit after self-cal, rms=0.089898Jy sigma=1.875241 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.753 mas, bpa=-0.2252 degrees ! Estimated noise=0.538501 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.385 x 7.753 at -0.2252 degrees (North through East) ! Clean map min=-0.0049319 max=0.18836 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=6.705 mas, bpa=2.231 degrees ! Estimated noise=0.666486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149679 Jy ! Component: 100 - total flux cleaned = 0.185722 Jy ! Component: 150 - total flux cleaned = 0.203264 Jy ! Component: 200 - total flux cleaned = 0.215136 Jy ! Total flux subtracted in 200 components = 0.215136 Jy ! Clean residual min=-0.007935 max=0.012638 Jy/beam ! Clean residual mean=0.000012 rms=0.002233 Jy/beam ! Combined flux in latest and established models = 0.215136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.215136 Jy ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.753 mas, bpa=-0.2252 degrees ! Estimated noise=0.538501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141562 Jy ! Component: 100 - total flux cleaned = 0.0221769 Jy ! Component: 150 - total flux cleaned = 0.0271435 Jy ! Component: 200 - total flux cleaned = 0.0291382 Jy ! Total flux subtracted in 200 components = 0.0291382 Jy ! Clean residual min=-0.005572 max=0.005637 Jy/beam ! Clean residual mean=0.000012 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.244275 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 71 components and 0.244275 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.369 mas, bmaj=11.65 mas, bpa=-10.64 degrees ! Estimated noise=0.664418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398821 Jy ! Component: 100 - total flux cleaned = 0.00474903 Jy ! Component: 150 - total flux cleaned = 0.00506016 Jy ! Component: 200 - total flux cleaned = 0.00523751 Jy ! Total flux subtracted in 200 components = 0.00523751 Jy ! Clean residual min=-0.006265 max=0.004539 Jy/beam ! Clean residual mean=0.000020 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.249512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015767 Jy ! Component: 100 - total flux cleaned = 0.000297661 Jy ! Component: 150 - total flux cleaned = 0.000361122 Jy ! Component: 200 - total flux cleaned = 0.000479862 Jy ! Total flux subtracted in 200 components = 0.000479862 Jy ! Clean residual min=-0.006047 max=0.004175 Jy/beam ! Clean residual mean=0.000020 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.249992 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 123 components and 0.249992 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.753 mas, bpa=-0.2252 degrees ! Estimated noise=0.538501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634004 Jy ! Component: 100 - total flux cleaned = 0.00118917 Jy ! Component: 150 - total flux cleaned = 0.00193697 Jy ! Component: 200 - total flux cleaned = 0.0023136 Jy ! Total flux subtracted in 200 components = 0.0023136 Jy ! Clean residual min=-0.004515 max=0.003811 Jy/beam ! Clean residual mean=0.000009 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.252306 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 0.252306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089639Jy sigma=1.871824 ! Fit after self-cal, rms=0.089574Jy sigma=1.870378 wmodel /scr/pima/bg219g_uvs/J1813+0615_S_map.mod ! Writing 147 model components to file: /scr/pima/bg219g_uvs/J1813+0615_S_map.mod wobs /scr/pima/bg219g_uvs/J1813+0615_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219g_uvs/J1813+0615_S_uvs.fits wwins /scr/pima/bg219g_uvs/J1813+0615_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219g_uvs/J1813+0615_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199551 Jy ! Component: 100 - total flux cleaned = -0.00377614 Jy ! Component: 150 - total flux cleaned = -0.005372 Jy ! Component: 200 - total flux cleaned = -0.00625303 Jy ! Component: 250 - total flux cleaned = -0.00685614 Jy ! Component: 300 - total flux cleaned = -0.00738071 Jy ! Component: 350 - total flux cleaned = -0.00782923 Jy ! Component: 400 - total flux cleaned = -0.0082098 Jy ! Component: 450 - total flux cleaned = -0.00852682 Jy ! Component: 500 - total flux cleaned = -0.00888627 Jy ! Component: 550 - total flux cleaned = -0.00928694 Jy ! Component: 600 - total flux cleaned = -0.00977562 Jy ! Component: 650 - total flux cleaned = -0.0101082 Jy ! Component: 700 - total flux cleaned = -0.0104346 Jy ! Component: 750 - total flux cleaned = -0.0107529 Jy ! Component: 800 - total flux cleaned = -0.0111971 Jy ! Component: 850 - total flux cleaned = -0.0114571 Jy ! Component: 900 - total flux cleaned = -0.011842 Jy ! Component: 950 - total flux cleaned = -0.0120522 Jy ! Component: 1000 - total flux cleaned = -0.0122587 Jy ! Component: 1050 - total flux cleaned = -0.0126224 Jy ! Component: 1100 - total flux cleaned = -0.0128211 Jy ! Component: 1150 - total flux cleaned = -0.0130158 Jy ! Component: 1200 - total flux cleaned = -0.0130921 Jy ! Component: 1250 - total flux cleaned = -0.0132433 Jy ! Component: 1300 - total flux cleaned = -0.0133551 Jy ! Component: 1350 - total flux cleaned = -0.0137226 Jy ! Component: 1400 - total flux cleaned = -0.0137223 Jy ! Component: 1450 - total flux cleaned = -0.014044 Jy ! Component: 1500 - total flux cleaned = -0.0141147 Jy ! Component: 1550 - total flux cleaned = -0.0144274 Jy ! Component: 1600 - total flux cleaned = -0.0147007 Jy ! Component: 1650 - total flux cleaned = -0.0149373 Jy ! Component: 1700 - total flux cleaned = -0.0152041 Jy ! Component: 1750 - total flux cleaned = -0.0154339 Jy ! Component: 1800 - total flux cleaned = -0.0156932 Jy ! Component: 1850 - total flux cleaned = -0.0159819 Jy ! Component: 1900 - total flux cleaned = -0.0162666 Jy ! Component: 1950 - total flux cleaned = -0.0164538 Jy ! Component: 2000 - total flux cleaned = -0.016701 Jy ! Component: 2050 - total flux cleaned = -0.0169147 Jy ! Component: 2100 - total flux cleaned = -0.017156 Jy ! Component: 2150 - total flux cleaned = -0.0173345 Jy ! Component: 2200 - total flux cleaned = -0.0175695 Jy ! Component: 2250 - total flux cleaned = -0.0178022 Jy ! Component: 2300 - total flux cleaned = -0.0180314 Jy ! Component: 2350 - total flux cleaned = -0.0183149 Jy ! Component: 2400 - total flux cleaned = -0.0184551 Jy ! Component: 2450 - total flux cleaned = -0.0187049 Jy ! Component: 2500 - total flux cleaned = -0.0189245 Jy ! Component: 2550 - total flux cleaned = -0.0191955 Jy ! Component: 2600 - total flux cleaned = -0.0193565 Jy ! Component: 2650 - total flux cleaned = -0.0197022 Jy ! Component: 2700 - total flux cleaned = -0.0198866 Jy ! Component: 2750 - total flux cleaned = -0.0201478 Jy ! Component: 2800 - total flux cleaned = -0.0204065 Jy ! Component: 2850 - total flux cleaned = -0.0207134 Jy ! Component: 2900 - total flux cleaned = -0.0209414 Jy ! Component: 2950 - total flux cleaned = -0.0211673 Jy ! Component: 3000 - total flux cleaned = -0.0214408 Jy ! Component: 3050 - total flux cleaned = -0.0216132 Jy ! Component: 3100 - total flux cleaned = -0.0218086 Jy ! Component: 3150 - total flux cleaned = -0.022051 Jy ! Component: 3200 - total flux cleaned = -0.0223149 Jy ! Component: 3250 - total flux cleaned = -0.0224813 Jy ! Component: 3300 - total flux cleaned = -0.0226703 Jy ! Component: 3350 - total flux cleaned = -0.0228107 Jy ! Component: 3400 - total flux cleaned = -0.0229736 Jy ! Component: 3450 - total flux cleaned = -0.0231352 Jy ! Component: 3500 - total flux cleaned = -0.0232726 Jy ! Component: 3550 - total flux cleaned = -0.023341 Jy ! Component: 3600 - total flux cleaned = -0.0235447 Jy ! Component: 3650 - total flux cleaned = -0.0235898 Jy ! Component: 3700 - total flux cleaned = -0.0237687 Jy ! Component: 3750 - total flux cleaned = -0.0238577 Jy ! Component: 3800 - total flux cleaned = -0.024012 Jy ! Component: 3850 - total flux cleaned = -0.0240776 Jy ! Component: 3900 - total flux cleaned = -0.0241212 Jy ! Component: 3950 - total flux cleaned = -0.024143 Jy ! Component: 4000 - total flux cleaned = -0.024208 Jy ! Component: 4050 - total flux cleaned = -0.0242294 Jy ! Total flux subtracted in 4096 components = -0.0242507 Jy ! Clean residual min=-0.001285 max=0.001288 Jy/beam ! Clean residual mean=0.000003 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.228055 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 464 components and 0.228055 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219g_uvs/J1813+0615_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.385 x 7.753 at -0.2252 degrees (North through East) ! Clean map min=-0.0034676 max=0.18537 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1813+0615_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.185367 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000380717 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616156 0.616156 1.23231 2.46462 4.92925 9.8585 19.717 39.434 78.868 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.185 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 486.889 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1813+0615_S_uvs.log closed on Thu Apr 7 07:22:12 2016