! Started logfile: /scr/pima/bg219g_uvs/J1813+0615_S_dfm.log on Thu May 19 21:57:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219g_uvs/J1813+0615_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1813+0615_S_uva.fits
! AN table 1: 23 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.895652 visibilities/baseline/integration-bin.
! Found source: J1813+0615
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3708 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1813+0615_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.029212Jy  sigma=23.058257
! Fit after  self-cal, rms=0.806945Jy  sigma=18.049853
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=6.709 mas, bpa=2.183 degrees
! Estimated noise=0.67395 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151537 Jy
! Component: 100  -  total flux cleaned = 0.185274 Jy
! Total flux subtracted in 100 components = 0.185274 Jy
! Clean residual min=-0.010568 max=0.017557 Jy/beam
! Clean residual mean=0.000018 rms=0.003230 Jy/beam
! Combined flux in latest and established models = 0.185274 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.185274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097534Jy  sigma=2.076929
! Fit after  self-cal, rms=0.097418Jy  sigma=2.075598
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.401 mas, bmaj=7.769 mas, bpa=-0.2682 degrees
! Estimated noise=0.541623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-49, 74.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223044 Jy
! Component: 100  -  total flux cleaned = 0.0338951 Jy
! Component: 150  -  total flux cleaned = 0.0413898 Jy
! Component: 200  -  total flux cleaned = 0.0466531 Jy
! Total flux subtracted in 200 components = 0.0466531 Jy
! Clean residual min=-0.009810 max=0.010866 Jy/beam
! Clean residual mean=0.000012 rms=0.002327 Jy/beam
! Combined flux in latest and established models = 0.231927 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 42 components and 0.231927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092955Jy  sigma=1.938000
! Fit after  self-cal, rms=0.092659Jy  sigma=1.928029
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.401 x 7.769 at -0.2682 degrees (North through East)
! Clean map  min=-0.008189  max=0.19355 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.98     KP        0.97     
!   LA        0.97     MK        1.03     NL        0.89     OV        1.02     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.092659Jy  sigma=1.928029
! Fit after  self-cal, rms=0.092272Jy  sigma=1.921940
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=7.77 mas, bpa=-0.1753 degrees
! Estimated noise=0.53748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440265 Jy
! Component: 100  -  total flux cleaned = 0.00503541 Jy
! Component: 150  -  total flux cleaned = 0.00563922 Jy
! Component: 200  -  total flux cleaned = 0.00598437 Jy
! Total flux subtracted in 200 components = 0.00598437 Jy
! Clean residual min=-0.007651 max=0.009065 Jy/beam
! Clean residual mean=0.000010 rms=0.001883 Jy/beam
! Combined flux in latest and established models = 0.237911 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 57 components and 0.237911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091993Jy  sigma=1.912784
! Fit after  self-cal, rms=0.091976Jy  sigma=1.911649
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091976Jy  sigma=1.911649
! Fit after  self-cal, rms=0.091435Jy  sigma=1.911012
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.399 mas, bmaj=7.762 mas, bpa=-0.1447 degrees
! Estimated noise=0.537929 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183387 Jy
! Component: 100  -  total flux cleaned = 0.00217939 Jy
! Component: 150  -  total flux cleaned = 0.00233085 Jy
! Component: 200  -  total flux cleaned = 0.00226736 Jy
! Total flux subtracted in 200 components = 0.00226736 Jy
! Clean residual min=-0.007377 max=0.008858 Jy/beam
! Clean residual mean=0.000010 rms=0.001831 Jy/beam
! Combined flux in latest and established models = 0.240179 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.240179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091310Jy  sigma=1.906902
! Fit after  self-cal, rms=0.091287Jy  sigma=1.906449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.5, -110).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00734229 Jy
! Component: 100  -  total flux cleaned = 0.00878152 Jy
! Component: 150  -  total flux cleaned = 0.00880761 Jy
! Component: 200  -  total flux cleaned = 0.0088132 Jy
! Total flux subtracted in 200 components = 0.0088132 Jy
! Clean residual min=-0.006699 max=0.005488 Jy/beam
! Clean residual mean=0.000012 rms=0.001514 Jy/beam
! Combined flux in latest and established models = 0.248992 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 91 components and 0.248992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090644Jy  sigma=1.891144
! Fit after  self-cal, rms=0.090556Jy  sigma=1.889903
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090556Jy  sigma=1.889903
! Fit after  self-cal, rms=0.090538Jy  sigma=1.881529
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.387 mas, bmaj=7.754 mas, bpa=-0.2221 degrees
! Estimated noise=0.538881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223056 Jy
! Component: 100  -  total flux cleaned = 0.0023215 Jy
! Component: 150  -  total flux cleaned = 0.00225215 Jy
! Component: 200  -  total flux cleaned = 0.00218671 Jy
! Total flux subtracted in 200 components = 0.00218671 Jy
! Clean residual min=-0.005151 max=0.004489 Jy/beam
! Clean residual mean=0.000011 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.251179 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 109 components and 0.251179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090416Jy  sigma=1.878274
! Fit after  self-cal, rms=0.090391Jy  sigma=1.878005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.99482e-05 Jy
! Component: 100  -  total flux cleaned = -3.71634e-05 Jy
! Component: 150  -  total flux cleaned = 1.70035e-05 Jy
! Component: 200  -  total flux cleaned = 1.63187e-05 Jy
! Total flux subtracted in 200 components = 1.63187e-05 Jy
! Clean residual min=-0.004962 max=0.004297 Jy/beam
! Clean residual mean=0.000011 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.251195 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 122 components and 0.251195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090328Jy  sigma=1.876555
! Fit after  self-cal, rms=0.090320Jy  sigma=1.876521
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090320Jy  sigma=1.876521
! Fit after  self-cal, rms=0.089873Jy  sigma=1.876125
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.369 mas, bmaj=11.65 mas, bpa=-10.64 degrees
! Estimated noise=0.664418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242858 Jy
! Component: 100  -  total flux cleaned = -0.000764281 Jy
! Component: 150  -  total flux cleaned = -0.0012097 Jy
! Component: 200  -  total flux cleaned = -0.00159275 Jy
! Total flux subtracted in 200 components = -0.00159275 Jy
! Clean residual min=-0.006262 max=0.004845 Jy/beam
! Clean residual mean=0.000019 rms=0.001625 Jy/beam
! Combined flux in latest and established models = 0.249602 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 136 components and 0.249602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089896Jy  sigma=1.875550
! Fit after  self-cal, rms=0.089871Jy  sigma=1.875333
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.26523e-05 Jy
! Component: 100  -  total flux cleaned = -0.000211441 Jy
! Component: 150  -  total flux cleaned = -0.000340512 Jy
! Component: 200  -  total flux cleaned = -0.000300536 Jy
! Total flux subtracted in 200 components = -0.000300536 Jy
! Clean residual min=-0.006208 max=0.004694 Jy/beam
! Clean residual mean=0.000020 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 0.249302 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 148 components and 0.249302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089907Jy  sigma=1.875363
! Fit after  self-cal, rms=0.089898Jy  sigma=1.875241
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.753 mas, bpa=-0.2252 degrees
! Estimated noise=0.538501 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 7.753 at -0.2252 degrees (North through East)
! Clean map  min=-0.0049319  max=0.18836 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.817 mas, bmaj=6.705 mas, bpa=2.231 degrees
! Estimated noise=0.666486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149679 Jy
! Component: 100  -  total flux cleaned = 0.185722 Jy
! Component: 150  -  total flux cleaned = 0.203264 Jy
! Component: 200  -  total flux cleaned = 0.215136 Jy
! Total flux subtracted in 200 components = 0.215136 Jy
! Clean residual min=-0.007935 max=0.012638 Jy/beam
! Clean residual mean=0.000012 rms=0.002233 Jy/beam
! Combined flux in latest and established models = 0.215136 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.215136 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.753 mas, bpa=-0.2252 degrees
! Estimated noise=0.538501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, -36.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141562 Jy
! Component: 100  -  total flux cleaned = 0.0221769 Jy
! Component: 150  -  total flux cleaned = 0.0271435 Jy
! Component: 200  -  total flux cleaned = 0.0291382 Jy
! Total flux subtracted in 200 components = 0.0291382 Jy
! Clean residual min=-0.005572 max=0.005637 Jy/beam
! Clean residual mean=0.000012 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.244275 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 71 components and 0.244275 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.369 mas, bmaj=11.65 mas, bpa=-10.64 degrees
! Estimated noise=0.664418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398821 Jy
! Component: 100  -  total flux cleaned = 0.00474903 Jy
! Component: 150  -  total flux cleaned = 0.00506016 Jy
! Component: 200  -  total flux cleaned = 0.00523751 Jy
! Total flux subtracted in 200 components = 0.00523751 Jy
! Clean residual min=-0.006265 max=0.004539 Jy/beam
! Clean residual mean=0.000020 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.249512 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015767 Jy
! Component: 100  -  total flux cleaned = 0.000297661 Jy
! Component: 150  -  total flux cleaned = 0.000361122 Jy
! Component: 200  -  total flux cleaned = 0.000479862 Jy
! Total flux subtracted in 200 components = 0.000479862 Jy
! Clean residual min=-0.006047 max=0.004175 Jy/beam
! Clean residual mean=0.000020 rms=0.001458 Jy/beam
! Combined flux in latest and established models = 0.249992 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 123 components and 0.249992 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.753 mas, bpa=-0.2252 degrees
! Estimated noise=0.538501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000634004 Jy
! Component: 100  -  total flux cleaned = 0.00118917 Jy
! Component: 150  -  total flux cleaned = 0.00193697 Jy
! Component: 200  -  total flux cleaned = 0.0023136 Jy
! Total flux subtracted in 200 components = 0.0023136 Jy
! Clean residual min=-0.004515 max=0.003811 Jy/beam
! Clean residual mean=0.000009 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.252306 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 147 components and 0.252306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089639Jy  sigma=1.871824
! Fit after  self-cal, rms=0.089574Jy  sigma=1.870378
wmodel /J1813+0615_S_map.mod
! wmodel: Unable to open new model file: /J1813+0615_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1813+0615_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 7.753 at -0.2252 degrees (North through East)
! Clean map  min=-0.0043966  max=0.18548 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1813+0615_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.185482 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00111239 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.7992 1.7992 3.59839 7.19679 14.3936 28.7871 57.5743
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.185 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  166.741 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1813+0615_S_dfm.log closed on Thu May 19 21:57:32 2016