! Started logfile: /scr/pima/bg219g_uvs/J1751-1950_X_dfm.log on Thu May 19 21:57:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1751-1950_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1751-1950_X_uva.fits
! AN table 1: 31 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.882437 visibilities/baseline/integration-bin.
! Found source: J1751-1950
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14772 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1751-1950_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005324Jy  sigma=21.620498
! Fit after  self-cal, rms=0.914055Jy  sigma=19.638358
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6226 mas, bmaj=1.708 mas, bpa=-10.14 degrees
! Estimated noise=0.579581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0624038 Jy
! Component: 100  -  total flux cleaned = 0.0820281 Jy
! Total flux subtracted in 100 components = 0.0820281 Jy
! Clean residual min=-0.005895 max=0.009557 Jy/beam
! Clean residual mean=-0.000015 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.0820281 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0820281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083093Jy  sigma=1.549993
! Fit after  self-cal, rms=0.082743Jy  sigma=1.541843
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113829 Jy
! Component: 100  -  total flux cleaned = 0.0180233 Jy
! Total flux subtracted in 100 components = 0.0180233 Jy
! Clean residual min=-0.004507 max=0.005446 Jy/beam
! Clean residual mean=-0.000007 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.100051 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.100051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080544Jy  sigma=1.485963
! Fit after  self-cal, rms=0.080526Jy  sigma=1.485343
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8 mas, bmaj=2.108 mas, bpa=-8.283 degrees
! Estimated noise=0.295483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00570542 Jy
! Component: 100  -  total flux cleaned = 0.00824771 Jy
! Component: 150  -  total flux cleaned = 0.00944063 Jy
! Component: 200  -  total flux cleaned = 0.00955959 Jy
! Total flux subtracted in 200 components = 0.00955959 Jy
! Clean residual min=-0.002373 max=0.002813 Jy/beam
! Clean residual mean=0.000001 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.109611 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.109611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080162Jy  sigma=1.476565
! Fit after  self-cal, rms=0.080158Jy  sigma=1.476360
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8 x 2.108 at -8.283 degrees (North through East)
! Clean map  min=-0.0021966  max=0.088215 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.96     MK        0.95     NL        1.02     OV        1.05     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.98     KP        1.00     
!   LA        1.11     MK        0.99     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.13     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.03     KP        1.00     
!   LA        1.07     MK        1.02     NL        0.98     OV        0.96     
!   PT        1.08     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.97     KP        1.00     
!   LA        1.06     MK        1.03     NL        1.04     OV        0.96     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.95     KP        0.97     
!   LA        1.10     MK        1.09     NL        1.00     OV        1.00     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.93     HN        1.02     KP        0.98     
!   LA        1.08     MK        0.97     NL        1.03     OV        0.92     
!   PT        1.14     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.98     MK        0.94     NL        1.00     OV        0.96     
!   PT        1.04     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        0.98     
!   LA        1.03     MK        1.04     NL        0.98     OV        0.92     
!   PT        1.06     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.91     MK        1.00     NL        0.98     OV        0.94     
!   PT        1.10     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.84     KP        0.99     
!   LA        0.94     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.05     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.94     KP        1.07     
!   LA        0.91     MK        1.06     NL        0.97     OV        0.89     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.86     KP        0.98     
!   LA        0.92     MK        0.95     NL        1.03     OV        0.98     
!   PT        1.01     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.080158Jy  sigma=1.476360
! Fit after  self-cal, rms=0.079048Jy  sigma=1.469907
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.798 mas, bmaj=2.107 mas, bpa=-8.18 degrees
! Estimated noise=0.293683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 34.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173799 Jy
! Component: 100  -  total flux cleaned = 0.00178705 Jy
! Component: 150  -  total flux cleaned = 0.00181989 Jy
! Component: 200  -  total flux cleaned = 0.00188528 Jy
! Total flux subtracted in 200 components = 0.00188528 Jy
! Clean residual min=-0.001814 max=0.002087 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.111496 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 0.111496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078979Jy  sigma=1.468341
! Fit after  self-cal, rms=0.079000Jy  sigma=1.467975
! Inverting map 
! Added new window around map position (-16.4, -29.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123869 Jy
! Component: 100  -  total flux cleaned = 0.00163272 Jy
! Component: 150  -  total flux cleaned = 0.0018295 Jy
! Component: 200  -  total flux cleaned = 0.00191967 Jy
! Total flux subtracted in 200 components = 0.00191967 Jy
! Clean residual min=-0.001814 max=0.001584 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.113416 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.113416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078945Jy  sigma=1.466926
! Fit after  self-cal, rms=0.078921Jy  sigma=1.466843
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078921Jy  sigma=1.466843
! Fit after  self-cal, rms=0.078332Jy  sigma=1.466693
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7957 mas, bmaj=2.101 mas, bpa=-8.084 degrees
! Estimated noise=0.291907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000466371 Jy
! Component: 100  -  total flux cleaned = 0.000554789 Jy
! Component: 150  -  total flux cleaned = 0.000582545 Jy
! Component: 200  -  total flux cleaned = 0.000631912 Jy
! Total flux subtracted in 200 components = 0.000631912 Jy
! Clean residual min=-0.001748 max=0.001541 Jy/beam
! Clean residual mean=-0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.114048 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 58 components and 0.114048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078312Jy  sigma=1.466293
! Fit after  self-cal, rms=0.078304Jy  sigma=1.466270
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.06011e-05 Jy
! Component: 100  -  total flux cleaned = 7.36602e-05 Jy
! Component: 150  -  total flux cleaned = 0.000116256 Jy
! Component: 200  -  total flux cleaned = 0.000136137 Jy
! Total flux subtracted in 200 components = 0.000136137 Jy
! Clean residual min=-0.001713 max=0.001476 Jy/beam
! Clean residual mean=-0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.114184 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 64 components and 0.114184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078292Jy  sigma=1.466034
! Fit after  self-cal, rms=0.078288Jy  sigma=1.466032
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078288Jy  sigma=1.466032
! Fit after  self-cal, rms=0.078134Jy  sigma=1.466003
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7947 mas, bmaj=2.098 mas, bpa=-8.051 degrees
! Estimated noise=0.291346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.50211e-05 Jy
! Component: 100  -  total flux cleaned = 4.49787e-05 Jy
! Component: 150  -  total flux cleaned = 4.54972e-05 Jy
! Component: 200  -  total flux cleaned = 8.30856e-05 Jy
! Total flux subtracted in 200 components = 8.30856e-05 Jy
! Clean residual min=-0.001665 max=0.001450 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.114267 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 71 components and 0.114267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078125Jy  sigma=1.465806
! Fit after  self-cal, rms=0.078122Jy  sigma=1.465799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.39362e-07 Jy
! Component: 100  -  total flux cleaned = -1.71077e-05 Jy
! Component: 150  -  total flux cleaned = -1.65599e-05 Jy
! Component: 200  -  total flux cleaned = -3.23236e-05 Jy
! Total flux subtracted in 200 components = -3.23236e-05 Jy
! Clean residual min=-0.001624 max=0.001410 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.114235 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.114235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078115Jy  sigma=1.465657
! Fit after  self-cal, rms=0.078113Jy  sigma=1.465652
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078113Jy  sigma=1.465652
! Fit after  self-cal, rms=0.078016Jy  sigma=1.465640
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.112 mas, bmaj=4.409 mas, bpa=-4.202 degrees
! Estimated noise=0.391707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.61906e-05 Jy
! Component: 100  -  total flux cleaned = -6.17295e-05 Jy
! Component: 150  -  total flux cleaned = -7.43037e-05 Jy
! Component: 200  -  total flux cleaned = -7.34099e-05 Jy
! Total flux subtracted in 200 components = -7.34099e-05 Jy
! Clean residual min=-0.001833 max=0.001438 Jy/beam
! Clean residual mean=-0.000002 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.114161 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 83 components and 0.114161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078014Jy  sigma=1.465580
! Fit after  self-cal, rms=0.078014Jy  sigma=1.465557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.17161e-05 Jy
! Component: 100  -  total flux cleaned = -4.34124e-05 Jy
! Component: 150  -  total flux cleaned = -5.2764e-05 Jy
! Component: 200  -  total flux cleaned = -4.35084e-05 Jy
! Total flux subtracted in 200 components = -4.35084e-05 Jy
! Clean residual min=-0.001820 max=0.001417 Jy/beam
! Clean residual mean=-0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.114118 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.114118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078014Jy  sigma=1.465547
! Fit after  self-cal, rms=0.078014Jy  sigma=1.465528
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7942 mas, bmaj=2.096 mas, bpa=-8.022 degrees
! Estimated noise=0.290936 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7942 x 2.096 at -8.022 degrees (North through East)
! Clean map  min=-0.0013678  max=0.087735 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6197 mas, bmaj=1.702 mas, bpa=-9.959 degrees
! Estimated noise=0.563715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604319 Jy
! Component: 100  -  total flux cleaned = 0.0806622 Jy
! Component: 150  -  total flux cleaned = 0.0921721 Jy
! Component: 200  -  total flux cleaned = 0.0984885 Jy
! Total flux subtracted in 200 components = 0.0984885 Jy
! Clean residual min=-0.004737 max=0.004707 Jy/beam
! Clean residual mean=-0.000007 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.0984885 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0984885 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7942 mas, bmaj=2.096 mas, bpa=-8.022 degrees
! Estimated noise=0.290936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620228 Jy
! Component: 100  -  total flux cleaned = 0.00941802 Jy
! Component: 150  -  total flux cleaned = 0.0117279 Jy
! Component: 200  -  total flux cleaned = 0.0127533 Jy
! Total flux subtracted in 200 components = 0.0127533 Jy
! Clean residual min=-0.002031 max=0.001926 Jy/beam
! Clean residual mean=-0.000002 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.111242 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.111242 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.112 mas, bmaj=4.409 mas, bpa=-4.202 degrees
! Estimated noise=0.391707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155394 Jy
! Component: 100  -  total flux cleaned = 0.00194035 Jy
! Component: 150  -  total flux cleaned = 0.00213549 Jy
! Component: 200  -  total flux cleaned = 0.0022821 Jy
! Total flux subtracted in 200 components = 0.0022821 Jy
! Clean residual min=-0.001873 max=0.001552 Jy/beam
! Clean residual mean=-0.000002 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.113524 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.51036e-05 Jy
! Component: 100  -  total flux cleaned = 0.00014426 Jy
! Component: 150  -  total flux cleaned = 0.000198216 Jy
! Component: 200  -  total flux cleaned = 0.000264782 Jy
! Total flux subtracted in 200 components = 0.000264782 Jy
! Clean residual min=-0.001783 max=0.001487 Jy/beam
! Clean residual mean=-0.000002 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.113789 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 56 components and 0.113789 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7942 mas, bmaj=2.096 mas, bpa=-8.022 degrees
! Estimated noise=0.290936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220803 Jy
! Component: 100  -  total flux cleaned = 0.000262648 Jy
! Component: 150  -  total flux cleaned = 0.000491275 Jy
! Component: 200  -  total flux cleaned = 0.000662783 Jy
! Total flux subtracted in 200 components = 0.000662783 Jy
! Clean residual min=-0.001880 max=0.001495 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.114451 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 75 components and 0.114451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078066Jy  sigma=1.466558
! Fit after  self-cal, rms=0.078062Jy  sigma=1.466422
wmodel /J1751-1950_X_map.mod
! wmodel: Unable to open new model file: /J1751-1950_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1751-1950_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7942 x 2.096 at -8.022 degrees (North through East)
! Clean map  min=-0.0016652  max=0.087122 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1751-1950_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0871219 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000367269 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.26467 1.26467 2.52934 5.05869 10.1174 20.2348 40.4695 80.939
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  237.215 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1751-1950_X_dfm.log closed on Thu May 19 21:57:29 2016