! Started logfile: /scr/pima/bg219g_uvs/J1739+3358_S_dfm.log on Thu May 19 21:56:46 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1739+3358_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1739+3358_S_uva.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.910714 visibilities/baseline/integration-bin. ! Found source: J1739+3358 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 1836 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1739+3358_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022430Jy sigma=24.873631 ! Fit after self-cal, rms=0.863314Jy sigma=20.998082 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=8.916 mas, bpa=18.85 degrees ! Estimated noise=1.12943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108136 Jy ! Component: 100 - total flux cleaned = 0.132142 Jy ! Total flux subtracted in 100 components = 0.132142 Jy ! Clean residual min=-0.008348 max=0.010040 Jy/beam ! Clean residual mean=-0.000016 rms=0.002388 Jy/beam ! Combined flux in latest and established models = 0.132142 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.132142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076366Jy sigma=1.841596 ! Fit after self-cal, rms=0.076332Jy sigma=1.841078 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=10.07 mas, bpa=17.73 degrees ! Estimated noise=0.767034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794582 Jy ! Component: 100 - total flux cleaned = 0.0105412 Jy ! Component: 150 - total flux cleaned = 0.0109321 Jy ! Component: 200 - total flux cleaned = 0.0115228 Jy ! Total flux subtracted in 200 components = 0.0115228 Jy ! Clean residual min=-0.008740 max=0.012567 Jy/beam ! Clean residual mean=-0.000025 rms=0.002355 Jy/beam ! Combined flux in latest and established models = 0.143665 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.143665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075502Jy sigma=1.822176 ! Fit after self-cal, rms=0.075492Jy sigma=1.822006 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 10.07 at 17.73 degrees (North through East) ! Clean map min=-0.0083022 max=0.13986 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 HN 1.06 KP 1.10 LA 0.95 ! MK 0.90 NL 0.85 OV 0.91 PT 1.03 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.03 KP 1.04 LA 0.94 ! MK 0.98 NL 0.89 OV 1.02 PT 1.03 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.87 HN 1.13 KP 1.00 LA 0.89 ! MK 1.00 NL 0.95 OV 0.98 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.075492Jy sigma=1.822006 ! Fit after self-cal, rms=0.072791Jy sigma=1.793297 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=10.1 mas, bpa=17.86 degrees ! Estimated noise=0.744751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101446 Jy ! Component: 100 - total flux cleaned = 0.0154332 Jy ! Component: 150 - total flux cleaned = 0.0192033 Jy ! Component: 200 - total flux cleaned = 0.0219699 Jy ! Total flux subtracted in 200 components = 0.0219699 Jy ! Clean residual min=-0.004680 max=0.004651 Jy/beam ! Clean residual mean=-0.000001 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.165635 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.165635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071333Jy sigma=1.755172 ! Fit after self-cal, rms=0.071326Jy sigma=1.752195 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071326Jy sigma=1.752195 ! Fit after self-cal, rms=0.070708Jy sigma=1.750365 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=10.12 mas, bpa=17.8 degrees ! Estimated noise=0.735528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879063 Jy ! Component: 100 - total flux cleaned = 0.00235961 Jy ! Component: 150 - total flux cleaned = 0.00304626 Jy ! Component: 200 - total flux cleaned = 0.00375069 Jy ! Total flux subtracted in 200 components = 0.00375069 Jy ! Clean residual min=-0.004164 max=0.004343 Jy/beam ! Clean residual mean=-0.000001 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.169386 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 68 components and 0.169386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070489Jy sigma=1.745160 ! Fit after self-cal, rms=0.070477Jy sigma=1.744916 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825506 Jy ! Component: 100 - total flux cleaned = 0.00131332 Jy ! Component: 150 - total flux cleaned = 0.00161714 Jy ! Component: 200 - total flux cleaned = 0.00180972 Jy ! Total flux subtracted in 200 components = 0.00180972 Jy ! Clean residual min=-0.004156 max=0.004223 Jy/beam ! Clean residual mean=-0.000001 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.171195 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 79 components and 0.171195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070408Jy sigma=1.743046 ! Fit after self-cal, rms=0.070394Jy sigma=1.743003 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070394Jy sigma=1.743003 ! Fit after self-cal, rms=0.069705Jy sigma=1.741962 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=10.13 mas, bpa=17.77 degrees ! Estimated noise=0.727103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123658 Jy ! Component: 100 - total flux cleaned = -0.00123925 Jy ! Component: 150 - total flux cleaned = -0.00115063 Jy ! Component: 200 - total flux cleaned = -0.000940231 Jy ! Total flux subtracted in 200 components = -0.000940231 Jy ! Clean residual min=-0.004058 max=0.004036 Jy/beam ! Clean residual mean=-0.000003 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.170255 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.170255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069622Jy sigma=1.739958 ! Fit after self-cal, rms=0.069614Jy sigma=1.739922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338557 Jy ! Component: 100 - total flux cleaned = 0.000571661 Jy ! Component: 150 - total flux cleaned = 0.000793175 Jy ! Component: 200 - total flux cleaned = 0.00100435 Jy ! Total flux subtracted in 200 components = 0.00100435 Jy ! Clean residual min=-0.004033 max=0.003913 Jy/beam ! Clean residual mean=-0.000003 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.17126 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.17126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069580Jy sigma=1.738961 ! Fit after self-cal, rms=0.069570Jy sigma=1.738946 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069570Jy sigma=1.738946 ! Fit after self-cal, rms=0.068958Jy sigma=1.738356 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.049 mas, bmaj=13.99 mas, bpa=7.041 degrees ! Estimated noise=0.85542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000736517 Jy ! Component: 100 - total flux cleaned = -0.00101498 Jy ! Component: 150 - total flux cleaned = -0.00110772 Jy ! Component: 200 - total flux cleaned = -0.00106851 Jy ! Total flux subtracted in 200 components = -0.00106851 Jy ! Clean residual min=-0.004436 max=0.004250 Jy/beam ! Clean residual mean=-0.000008 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.170191 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.170191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068920Jy sigma=1.737551 ! Fit after self-cal, rms=0.068910Jy sigma=1.737329 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232855 Jy ! Component: 100 - total flux cleaned = 0.000340198 Jy ! Component: 150 - total flux cleaned = 0.000339917 Jy ! Component: 200 - total flux cleaned = 0.000340364 Jy ! Total flux subtracted in 200 components = 0.000340364 Jy ! Clean residual min=-0.004364 max=0.004276 Jy/beam ! Clean residual mean=-0.000009 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.170531 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.170531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068901Jy sigma=1.737025 ! Fit after self-cal, rms=0.068897Jy sigma=1.736960 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=10.14 mas, bpa=17.73 degrees ! Estimated noise=0.720245 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 10.14 at 17.73 degrees (North through East) ! Clean map min=-0.003711 max=0.13365 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=8.982 mas, bpa=18.98 degrees ! Estimated noise=1.07261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102621 Jy ! Component: 100 - total flux cleaned = 0.125636 Jy ! Component: 150 - total flux cleaned = 0.134632 Jy ! Component: 200 - total flux cleaned = 0.141096 Jy ! Total flux subtracted in 200 components = 0.141096 Jy ! Clean residual min=-0.007347 max=0.007620 Jy/beam ! Clean residual mean=-0.000011 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.141096 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.141096 Jy ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=10.14 mas, bpa=17.73 degrees ! Estimated noise=0.720245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, -93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736354 Jy ! Component: 100 - total flux cleaned = 0.0121247 Jy ! Component: 150 - total flux cleaned = 0.0159157 Jy ! Component: 200 - total flux cleaned = 0.0189096 Jy ! Total flux subtracted in 200 components = 0.0189096 Jy ! Clean residual min=-0.004659 max=0.004392 Jy/beam ! Clean residual mean=-0.000007 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.160006 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 57 components and 0.160006 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.049 mas, bmaj=13.99 mas, bpa=7.041 degrees ! Estimated noise=0.85542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344705 Jy ! Component: 100 - total flux cleaned = 0.00528297 Jy ! Component: 150 - total flux cleaned = 0.00605101 Jy ! Component: 200 - total flux cleaned = 0.00635198 Jy ! Total flux subtracted in 200 components = 0.00635198 Jy ! Clean residual min=-0.005186 max=0.005376 Jy/beam ! Clean residual mean=-0.000012 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.166358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401929 Jy ! Component: 100 - total flux cleaned = 0.000701575 Jy ! Component: 150 - total flux cleaned = 0.000922115 Jy ! Component: 200 - total flux cleaned = 0.00107302 Jy ! Total flux subtracted in 200 components = 0.00107302 Jy ! Clean residual min=-0.004840 max=0.005110 Jy/beam ! Clean residual mean=-0.000012 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 0.167431 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 108 components and 0.167431 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=10.14 mas, bpa=17.73 degrees ! Estimated noise=0.720245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722742 Jy ! Component: 100 - total flux cleaned = -0.000574445 Jy ! Component: 150 - total flux cleaned = -0.000434764 Jy ! Component: 200 - total flux cleaned = -0.00023802 Jy ! Total flux subtracted in 200 components = -0.00023802 Jy ! Clean residual min=-0.004145 max=0.003583 Jy/beam ! Clean residual mean=-0.000006 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.167193 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 0.167193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068795Jy sigma=1.735739 ! Fit after self-cal, rms=0.068815Jy sigma=1.735287 wmodel /J1739+3358_S_map.mod ! wmodel: Unable to open new model file: /J1739+3358_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1739+3358_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 10.14 at 17.73 degrees (North through East) ! Clean map min=-0.0039622 max=0.13267 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1739+3358_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.132669 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000994489 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.2488 2.2488 4.4976 8.9952 17.9904 35.9808 71.9616 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.132 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 133.404 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1739+3358_S_dfm.log closed on Thu May 19 21:56:48 2016