! Started logfile: /scr/pima/bg219g_uvs/J1728+3838_X_dfm.log on Thu May 19 21:56:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1728+3838_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1728+3838_X_uva.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.911111 visibilities/baseline/integration-bin.
! Found source: J1728+3838
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 8856 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1728+3838_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031879Jy  sigma=24.023378
! Fit after  self-cal, rms=0.755515Jy  sigma=17.571497
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6578 mas, bmaj=2.232 mas, bpa=22.93 degrees
! Estimated noise=0.654467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.188881 Jy
! Component: 100  -  total flux cleaned = 0.2301 Jy
! Total flux subtracted in 100 components = 0.2301 Jy
! Clean residual min=-0.007517 max=0.011946 Jy/beam
! Clean residual mean=0.000006 rms=0.001885 Jy/beam
! Combined flux in latest and established models = 0.2301 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.2301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072372Jy  sigma=1.575684
! Fit after  self-cal, rms=0.072365Jy  sigma=1.575546
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126869 Jy
! Component: 100  -  total flux cleaned = 0.0194342 Jy
! Total flux subtracted in 100 components = 0.0194342 Jy
! Clean residual min=-0.006389 max=0.006044 Jy/beam
! Clean residual mean=0.000002 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.249534 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.249534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069483Jy  sigma=1.499745
! Fit after  self-cal, rms=0.069490Jy  sigma=1.499611
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8517 mas, bmaj=2.323 mas, bpa=20.58 degrees
! Estimated noise=0.35291 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00584334 Jy
! Component: 100  -  total flux cleaned = 0.00909631 Jy
! Component: 150  -  total flux cleaned = 0.0113097 Jy
! Component: 200  -  total flux cleaned = 0.0128631 Jy
! Total flux subtracted in 200 components = 0.0128631 Jy
! Clean residual min=-0.004656 max=0.004106 Jy/beam
! Clean residual mean=-0.000002 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.262397 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 32 components and 0.262397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068988Jy  sigma=1.486527
! Fit after  self-cal, rms=0.068991Jy  sigma=1.486412
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8517 x 2.323 at 20.58 degrees (North through East)
! Clean map  min=-0.0045535  max=0.24753 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.02     KP        1.03     
!   LA        0.95     MK        0.96     NL        1.04     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.02     KP        1.02     
!   LA        0.97     MK        0.97     NL        1.04     OV        1.02     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        1.01     
!   LA        0.93     MK        1.01     NL        1.04     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.01     KP        1.05     
!   LA        0.94     MK        0.98     NL        1.07     OV        0.98     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        1.04     
!   LA        0.96     MK        1.01     NL        1.02     OV        1.00     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.04     OV        0.96     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.91     MK        1.00     NL        1.02     OV        1.01     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.01     KP        1.02     
!   LA        0.94     MK        0.98     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        1.01     
!   LA        0.94     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.98     KP        1.00     
!   LA        0.93     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        1.03     
!   LA        0.92     MK        1.00     NL        1.04     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        1.07     
!   LA        0.95     MK        0.96     NL        1.01     OV        1.00     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.068991Jy  sigma=1.486412
! Fit after  self-cal, rms=0.067136Jy  sigma=1.464381
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8518 mas, bmaj=2.336 mas, bpa=20.61 degrees
! Estimated noise=0.35205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140972 Jy
! Component: 100  -  total flux cleaned = -0.00162158 Jy
! Component: 150  -  total flux cleaned = -0.00168937 Jy
! Component: 200  -  total flux cleaned = -0.00180628 Jy
! Total flux subtracted in 200 components = -0.00180628 Jy
! Clean residual min=-0.002124 max=0.002340 Jy/beam
! Clean residual mean=-0.000001 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.260591 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.260591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067099Jy  sigma=1.463718
! Fit after  self-cal, rms=0.067102Jy  sigma=1.463616
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067102Jy  sigma=1.463616
! Fit after  self-cal, rms=0.067076Jy  sigma=1.463432
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8515 mas, bmaj=2.339 mas, bpa=20.63 degrees
! Estimated noise=0.351778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000802858 Jy
! Component: 100  -  total flux cleaned = -0.00097106 Jy
! Component: 150  -  total flux cleaned = -0.00106223 Jy
! Component: 200  -  total flux cleaned = -0.00115916 Jy
! Total flux subtracted in 200 components = -0.00115916 Jy
! Clean residual min=-0.002014 max=0.002272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.259432 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.259432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067061Jy  sigma=1.463158
! Fit after  self-cal, rms=0.067061Jy  sigma=1.463154
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193653 Jy
! Component: 100  -  total flux cleaned = 0.00273837 Jy
! Component: 150  -  total flux cleaned = 0.00303023 Jy
! Component: 200  -  total flux cleaned = 0.00314184 Jy
! Total flux subtracted in 200 components = 0.00314184 Jy
! Clean residual min=-0.001729 max=0.001986 Jy/beam
! Clean residual mean=-0.000000 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.262574 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 0.262574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066996Jy  sigma=1.461673
! Fit after  self-cal, rms=0.066996Jy  sigma=1.461638
! Inverting map 
! Added new window around map position (-1.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000942076 Jy
! Component: 100  -  total flux cleaned = 0.000943036 Jy
! Component: 150  -  total flux cleaned = 0.0010305 Jy
! Component: 200  -  total flux cleaned = 0.00126374 Jy
! Total flux subtracted in 200 components = 0.00126374 Jy
! Clean residual min=-0.001629 max=0.001591 Jy/beam
! Clean residual mean=-0.000001 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.263837 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 77 components and 0.263837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066946Jy  sigma=1.460343
! Fit after  self-cal, rms=0.066943Jy  sigma=1.460296
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066943Jy  sigma=1.460296
! Fit after  self-cal, rms=0.066899Jy  sigma=1.460212
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8509 mas, bmaj=2.34 mas, bpa=20.65 degrees
! Estimated noise=0.351445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363787 Jy
! Component: 100  -  total flux cleaned = 0.000587462 Jy
! Component: 150  -  total flux cleaned = 0.000746059 Jy
! Component: 200  -  total flux cleaned = 0.000835487 Jy
! Total flux subtracted in 200 components = 0.000835487 Jy
! Clean residual min=-0.001589 max=0.001570 Jy/beam
! Clean residual mean=-0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.264673 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 94 components and 0.264673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066886Jy  sigma=1.459909
! Fit after  self-cal, rms=0.066885Jy  sigma=1.459896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111055 Jy
! Component: 100  -  total flux cleaned = 0.000255859 Jy
! Component: 150  -  total flux cleaned = 0.000315112 Jy
! Component: 200  -  total flux cleaned = 0.000357165 Jy
! Total flux subtracted in 200 components = 0.000357165 Jy
! Clean residual min=-0.001570 max=0.001572 Jy/beam
! Clean residual mean=-0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.26503 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 105 components and 0.26503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066878Jy  sigma=1.459744
! Fit after  self-cal, rms=0.066877Jy  sigma=1.459735
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066877Jy  sigma=1.459735
! Fit after  self-cal, rms=0.066876Jy  sigma=1.459716
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.979 mas, bmaj=2.903 mas, bpa=11.14 degrees
! Estimated noise=0.445373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025401 Jy
! Component: 100  -  total flux cleaned = 0.000298135 Jy
! Component: 150  -  total flux cleaned = 0.000323456 Jy
! Component: 200  -  total flux cleaned = 0.000334502 Jy
! Total flux subtracted in 200 components = 0.000334502 Jy
! Clean residual min=-0.001291 max=0.001163 Jy/beam
! Clean residual mean=-0.000003 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.265364 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 115 components and 0.265364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066874Jy  sigma=1.459627
! Fit after  self-cal, rms=0.066872Jy  sigma=1.459614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.85209e-05 Jy
! Component: 100  -  total flux cleaned = 8.84364e-05 Jy
! Component: 150  -  total flux cleaned = 6.91829e-05 Jy
! Component: 200  -  total flux cleaned = 4.30537e-05 Jy
! Total flux subtracted in 200 components = 4.30537e-05 Jy
! Clean residual min=-0.001254 max=0.001135 Jy/beam
! Clean residual mean=-0.000003 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.265408 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.265408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066871Jy  sigma=1.459575
! Fit after  self-cal, rms=0.066870Jy  sigma=1.459568
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8507 mas, bmaj=2.34 mas, bpa=20.66 degrees
! Estimated noise=0.35137 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8507 x 2.34 at 20.66 degrees (North through East)
! Clean map  min=-0.0014394  max=0.24634 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6559 mas, bmaj=2.247 mas, bpa=22.99 degrees
! Estimated noise=0.650753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187767 Jy
! Component: 100  -  total flux cleaned = 0.228753 Jy
! Component: 150  -  total flux cleaned = 0.241799 Jy
! Component: 200  -  total flux cleaned = 0.248808 Jy
! Total flux subtracted in 200 components = 0.248808 Jy
! Clean residual min=-0.004744 max=0.005138 Jy/beam
! Clean residual mean=0.000001 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.248808 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.248808 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8507 mas, bmaj=2.34 mas, bpa=20.66 degrees
! Estimated noise=0.35137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569373 Jy
! Component: 100  -  total flux cleaned = 0.00869424 Jy
! Component: 150  -  total flux cleaned = 0.010685 Jy
! Component: 200  -  total flux cleaned = 0.0117232 Jy
! Total flux subtracted in 200 components = 0.0117232 Jy
! Clean residual min=-0.001912 max=0.001851 Jy/beam
! Clean residual mean=-0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.260531 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 30 components and 0.260531 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.979 mas, bmaj=2.903 mas, bpa=11.14 degrees
! Estimated noise=0.445373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159526 Jy
! Component: 100  -  total flux cleaned = 0.00258799 Jy
! Component: 150  -  total flux cleaned = 0.00302045 Jy
! Component: 200  -  total flux cleaned = 0.0034138 Jy
! Total flux subtracted in 200 components = 0.0034138 Jy
! Clean residual min=-0.001438 max=0.001294 Jy/beam
! Clean residual mean=-0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.263945 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237038 Jy
! Component: 100  -  total flux cleaned = 0.000403016 Jy
! Component: 150  -  total flux cleaned = 0.000554114 Jy
! Component: 200  -  total flux cleaned = 0.000691951 Jy
! Total flux subtracted in 200 components = 0.000691951 Jy
! Clean residual min=-0.001338 max=0.001222 Jy/beam
! Clean residual mean=-0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.264637 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 73 components and 0.264637 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8507 mas, bmaj=2.34 mas, bpa=20.66 degrees
! Estimated noise=0.35137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000465766 Jy
! Component: 100  -  total flux cleaned = 0.000497153 Jy
! Component: 150  -  total flux cleaned = 0.000497491 Jy
! Component: 200  -  total flux cleaned = 0.000521904 Jy
! Total flux subtracted in 200 components = 0.000521904 Jy
! Clean residual min=-0.001690 max=0.001673 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.265159 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.265159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066894Jy  sigma=1.460072
! Fit after  self-cal, rms=0.066892Jy  sigma=1.460023
wmodel /J1728+3838_X_map.mod
! wmodel: Unable to open new model file: /J1728+3838_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1728+3838_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8507 x 2.34 at 20.66 degrees (North through East)
! Clean map  min=-0.0014687  max=0.24645 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1728+3838_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.246449 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000384552 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.468111 0.468111 0.936222 1.87244 3.74489 7.48978 14.9796 29.9591 59.9182
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.246 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  640.873 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1728+3838_X_dfm.log closed on Thu May 19 21:56:06 2016