! Started logfile: /scr/pima/bg219g_uvs/J1720-2258_X_dfm.log on Thu May 19 21:55:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1720-2258_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1720-2258_X_uva.fits
! AN table 1: 31 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.921864 visibilities/baseline/integration-bin.
! Found source: J1720-2258
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15432 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1720-2258_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003862Jy  sigma=21.309324
! Fit after  self-cal, rms=0.948656Jy  sigma=20.163154
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6126 mas, bmaj=1.769 mas, bpa=-10.53 degrees
! Estimated noise=0.514979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0380894 Jy
! Component: 100  -  total flux cleaned = 0.0508614 Jy
! Total flux subtracted in 100 components = 0.0508614 Jy
! Clean residual min=-0.004634 max=0.006009 Jy/beam
! Clean residual mean=-0.000008 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.0508614 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0508614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080689Jy  sigma=1.511320
! Fit after  self-cal, rms=0.079275Jy  sigma=1.479950
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00876437 Jy
! Component: 100  -  total flux cleaned = 0.0131786 Jy
! Total flux subtracted in 100 components = 0.0131786 Jy
! Clean residual min=-0.004175 max=0.004547 Jy/beam
! Clean residual mean=0.000001 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.06404 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 11 components and 0.06404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078167Jy  sigma=1.456413
! Fit after  self-cal, rms=0.078150Jy  sigma=1.455913
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8284 mas, bmaj=2.2 mas, bpa=-9.809 degrees
! Estimated noise=0.289957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251201 Jy
! Component: 100  -  total flux cleaned = 0.00281914 Jy
! Component: 150  -  total flux cleaned = 0.00282131 Jy
! Component: 200  -  total flux cleaned = 0.00285177 Jy
! Total flux subtracted in 200 components = 0.00285177 Jy
! Clean residual min=-0.002523 max=0.002674 Jy/beam
! Clean residual mean=0.000000 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0668918 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.0668918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078050Jy  sigma=1.454263
! Fit after  self-cal, rms=0.078032Jy  sigma=1.454072
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8284 x 2.2 at -9.809 degrees (North through East)
! Clean map  min=-0.0023812  max=0.055066 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        0.84     KP        1.06     
!   LA        0.97     MK        0.97     NL        0.99     OV        1.03     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.95     KP        1.05     
!   LA        0.92     MK        0.92     NL        0.94     OV        0.98     
!   PT        1.10     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.92     KP        1.03     
!   LA        0.99     MK        1.11     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        1.02     KP        1.06     
!   LA        0.92     MK        1.04     NL        1.03     OV        0.99     
!   PT        1.08     SC        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.91     KP        1.16     
!   LA        0.91     MK        0.91     NL        1.08     OV        0.98     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.96     KP        1.11     
!   LA        0.88     MK        0.93     NL        1.11     OV        0.95     
!   PT        1.11     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.95     KP        1.12     
!   LA        0.89     MK        0.85     NL        1.04     OV        1.00     
!   PT        1.09     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.00     HN        0.91     KP        1.11     
!   LA        0.85     MK        0.92     NL        1.03     OV        0.99     
!   PT        0.98     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.078032Jy  sigma=1.454072
! Fit after  self-cal, rms=0.075654Jy  sigma=1.451565
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8187 mas, bmaj=2.184 mas, bpa=-9.979 degrees
! Estimated noise=0.289092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000662003 Jy
! Component: 100  -  total flux cleaned = 0.000711164 Jy
! Component: 150  -  total flux cleaned = 0.000730632 Jy
! Component: 200  -  total flux cleaned = 0.000730178 Jy
! Total flux subtracted in 200 components = 0.000730178 Jy
! Clean residual min=-0.001905 max=0.002178 Jy/beam
! Clean residual mean=-0.000001 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.0676219 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.0676219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075638Jy  sigma=1.451248
! Fit after  self-cal, rms=0.075615Jy  sigma=1.450791
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075615Jy  sigma=1.450791
! Fit after  self-cal, rms=0.075681Jy  sigma=1.450659
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8153 mas, bmaj=2.182 mas, bpa=-10.27 degrees
! Estimated noise=0.289871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407973 Jy
! Component: 100  -  total flux cleaned = 0.000477479 Jy
! Component: 150  -  total flux cleaned = 0.000507082 Jy
! Component: 200  -  total flux cleaned = 0.000507277 Jy
! Total flux subtracted in 200 components = 0.000507277 Jy
! Clean residual min=-0.001957 max=0.002188 Jy/beam
! Clean residual mean=-0.000001 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.0681292 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.0681292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075672Jy  sigma=1.450487
! Fit after  self-cal, rms=0.075673Jy  sigma=1.450448
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.10889e-05 Jy
! Component: 100  -  total flux cleaned = 3.5622e-05 Jy
! Component: 150  -  total flux cleaned = 4.7674e-05 Jy
! Component: 200  -  total flux cleaned = 4.70541e-05 Jy
! Total flux subtracted in 200 components = 4.70541e-05 Jy
! Clean residual min=-0.001984 max=0.002181 Jy/beam
! Clean residual mean=-0.000001 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.0681763 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.0681763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075669Jy  sigma=1.450352
! Fit after  self-cal, rms=0.075669Jy  sigma=1.450342
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075669Jy  sigma=1.450342
! Fit after  self-cal, rms=0.075932Jy  sigma=1.450304
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.814 mas, bmaj=2.183 mas, bpa=-10.5 degrees
! Estimated noise=0.290887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00020901 Jy
! Component: 100  -  total flux cleaned = 0.00029327 Jy
! Component: 150  -  total flux cleaned = 0.000317369 Jy
! Component: 200  -  total flux cleaned = 0.000317342 Jy
! Total flux subtracted in 200 components = 0.000317342 Jy
! Clean residual min=-0.001972 max=0.002188 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0684936 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.0684936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075927Jy  sigma=1.450215
! Fit after  self-cal, rms=0.075930Jy  sigma=1.450182
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21, -29.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183906 Jy
! Component: 100  -  total flux cleaned = 0.00196023 Jy
! Component: 150  -  total flux cleaned = 0.00196115 Jy
! Component: 200  -  total flux cleaned = 0.0019596 Jy
! Total flux subtracted in 200 components = 0.0019596 Jy
! Clean residual min=-0.001790 max=0.002212 Jy/beam
! Clean residual mean=0.000000 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0704532 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.0704532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075879Jy  sigma=1.449160
! Fit after  self-cal, rms=0.075861Jy  sigma=1.448912
! Inverting map 
! Added new window around map position (1.8, -14.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709256 Jy
! Component: 100  -  total flux cleaned = 0.00086042 Jy
! Component: 150  -  total flux cleaned = 0.00105338 Jy
! Component: 200  -  total flux cleaned = 0.00121482 Jy
! Total flux subtracted in 200 components = 0.00121482 Jy
! Clean residual min=-0.001740 max=0.002127 Jy/beam
! Clean residual mean=0.000001 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.071668 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.071668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075787Jy  sigma=1.447647
! Fit after  self-cal, rms=0.075755Jy  sigma=1.447401
! Inverting map 
! Added new window around map position (-2.4, 30.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186299 Jy
! Component: 100  -  total flux cleaned = 0.00255406 Jy
! Component: 150  -  total flux cleaned = 0.00308403 Jy
! Component: 200  -  total flux cleaned = 0.00339525 Jy
! Total flux subtracted in 200 components = 0.00339525 Jy
! Clean residual min=-0.001757 max=0.001636 Jy/beam
! Clean residual mean=0.000000 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0750633 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 67 components and 0.0750633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075694Jy  sigma=1.446225
! Fit after  self-cal, rms=0.075678Jy  sigma=1.445964
! Inverting map 
! Added new window around map position (-2.6, 19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110435 Jy
! Component: 100  -  total flux cleaned = 0.00151119 Jy
! Component: 150  -  total flux cleaned = 0.00190137 Jy
! Component: 200  -  total flux cleaned = 0.00207432 Jy
! Total flux subtracted in 200 components = 0.00207432 Jy
! Clean residual min=-0.001754 max=0.001347 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.0771376 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 0.0771376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075618Jy  sigma=1.444962
! Fit after  self-cal, rms=0.075601Jy  sigma=1.444808
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075601Jy  sigma=1.444808
! Fit after  self-cal, rms=0.074960Jy  sigma=1.444127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.173 mas, bmaj=4.93 mas, bpa=-5.117 degrees
! Estimated noise=0.38225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000922463 Jy
! Component: 100  -  total flux cleaned = 0.00154595 Jy
! Component: 150  -  total flux cleaned = 0.0020478 Jy
! Component: 200  -  total flux cleaned = 0.0024798 Jy
! Total flux subtracted in 200 components = 0.0024798 Jy
! Clean residual min=-0.001731 max=0.001488 Jy/beam
! Clean residual mean=0.000003 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.0796174 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 103 components and 0.0796174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074950Jy  sigma=1.443971
! Fit after  self-cal, rms=0.074946Jy  sigma=1.443796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051948 Jy
! Component: 100  -  total flux cleaned = 0.000934614 Jy
! Component: 150  -  total flux cleaned = 0.00114358 Jy
! Component: 200  -  total flux cleaned = 0.00130874 Jy
! Total flux subtracted in 200 components = 0.00130874 Jy
! Clean residual min=-0.001689 max=0.001472 Jy/beam
! Clean residual mean=0.000003 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.0809261 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.0809261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074941Jy  sigma=1.443744
! Fit after  self-cal, rms=0.074937Jy  sigma=1.443722
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=2.19 mas, bpa=-10.93 degrees
! Estimated noise=0.289308 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8125 x 2.19 at -10.93 degrees (North through East)
! Clean map  min=-0.0018138  max=0.055579 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6022 mas, bmaj=1.777 mas, bpa=-11.59 degrees
! Estimated noise=0.503478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0395698 Jy
! Component: 100  -  total flux cleaned = 0.0541463 Jy
! Component: 150  -  total flux cleaned = 0.0616795 Jy
! Component: 200  -  total flux cleaned = 0.0653598 Jy
! Total flux subtracted in 200 components = 0.0653598 Jy
! Clean residual min=-0.003841 max=0.003952 Jy/beam
! Clean residual mean=-0.000002 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.0653598 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0653598 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=2.19 mas, bpa=-10.93 degrees
! Estimated noise=0.289308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423947 Jy
! Component: 100  -  total flux cleaned = 0.00649424 Jy
! Component: 150  -  total flux cleaned = 0.00786492 Jy
! Component: 200  -  total flux cleaned = 0.00890673 Jy
! Total flux subtracted in 200 components = 0.00890673 Jy
! Clean residual min=-0.001839 max=0.001844 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0742666 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.0742666 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.173 mas, bmaj=4.93 mas, bpa=-5.117 degrees
! Estimated noise=0.38225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019256 Jy
! Component: 100  -  total flux cleaned = 0.00323954 Jy
! Component: 150  -  total flux cleaned = 0.00425411 Jy
! Component: 200  -  total flux cleaned = 0.00505519 Jy
! Total flux subtracted in 200 components = 0.00505519 Jy
! Clean residual min=-0.001856 max=0.001597 Jy/beam
! Clean residual mean=0.000002 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0793217 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397755 Jy
! Component: 100  -  total flux cleaned = 0.000725308 Jy
! Component: 150  -  total flux cleaned = 0.000973424 Jy
! Component: 200  -  total flux cleaned = 0.00119808 Jy
! Total flux subtracted in 200 components = 0.00119808 Jy
! Clean residual min=-0.001768 max=0.001594 Jy/beam
! Clean residual mean=0.000003 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0805198 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 72 components and 0.0805198 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=2.19 mas, bpa=-10.93 degrees
! Estimated noise=0.289308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.36109e-05 Jy
! Component: 100  -  total flux cleaned = 5.18089e-05 Jy
! Component: 150  -  total flux cleaned = 9.69809e-05 Jy
! Component: 200  -  total flux cleaned = 0.000138666 Jy
! Total flux subtracted in 200 components = 0.000138666 Jy
! Clean residual min=-0.001521 max=0.001594 Jy/beam
! Clean residual mean=0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.0806585 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 84 components and 0.0806585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074952Jy  sigma=1.444064
! Fit after  self-cal, rms=0.074936Jy  sigma=1.443849
wmodel /J1720-2258_X_map.mod
! wmodel: Unable to open new model file: /J1720-2258_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1720-2258_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8125 x 2.19 at -10.93 degrees (North through East)
! Clean map  min=-0.00176  max=0.055138 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1720-2258_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0551375 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000380206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.06868 2.06868 4.13736 8.27472 16.5494 33.0989 66.1978
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  145.02 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1720-2258_X_dfm.log closed on Thu May 19 21:55:14 2016