! Started logfile: /scr/pima/bg219g_uvs/J1656+5321_S_dfm.log on Thu May 19 21:54:07 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1656+5321_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1656+5321_S_uva.fits ! AN table 1: 23 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.904589 visibilities/baseline/integration-bin. ! Found source: J1656+5321 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 2996 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1656+5321_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.021165Jy sigma=24.885979 ! Fit after self-cal, rms=0.863263Jy sigma=20.964180 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=9.767 mas, bpa=42.13 degrees ! Estimated noise=0.857592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106403 Jy ! Component: 100 - total flux cleaned = 0.129874 Jy ! Total flux subtracted in 100 components = 0.129874 Jy ! Clean residual min=-0.006389 max=0.008730 Jy/beam ! Clean residual mean=-0.000017 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.129874 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.129874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063658Jy sigma=1.463470 ! Fit after self-cal, rms=0.063645Jy sigma=1.463269 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=10.18 mas, bpa=41.87 degrees ! Estimated noise=0.561433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00994344 Jy ! Component: 100 - total flux cleaned = 0.0127979 Jy ! Component: 150 - total flux cleaned = 0.0141436 Jy ! Component: 200 - total flux cleaned = 0.0145781 Jy ! Total flux subtracted in 200 components = 0.0145781 Jy ! Clean residual min=-0.006382 max=0.004947 Jy/beam ! Clean residual mean=-0.000008 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.144452 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 40 components and 0.144452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062016Jy sigma=1.412092 ! Fit after self-cal, rms=0.062025Jy sigma=1.411815 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 10.18 at 41.87 degrees (North through East) ! Clean map min=-0.006173 max=0.13948 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.01 KP 1.06 LA 0.94 ! MK 1.03 NL 0.88 OV 1.00 PT 0.99 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.09 KP 1.00 LA 1.05 ! MK 1.06 NL 0.85 OV 0.99 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.07 KP 1.06 LA 0.96 ! MK 1.08 NL 1.08 OV 0.96 PT 1.06 ! SC 1.10 ! ! ! Fit before self-cal, rms=0.062025Jy sigma=1.411815 ! Fit after self-cal, rms=0.061571Jy sigma=1.383666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=10.25 mas, bpa=41.96 degrees ! Estimated noise=0.564861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354867 Jy ! Component: 100 - total flux cleaned = 0.000406139 Jy ! Component: 150 - total flux cleaned = 0.000541645 Jy ! Component: 200 - total flux cleaned = 0.000771637 Jy ! Total flux subtracted in 200 components = 0.000771637 Jy ! Clean residual min=-0.003343 max=0.002640 Jy/beam ! Clean residual mean=-0.000003 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.145224 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.145224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061481Jy sigma=1.380716 ! Fit after self-cal, rms=0.061511Jy sigma=1.380401 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061511Jy sigma=1.380401 ! Fit after self-cal, rms=0.061936Jy sigma=1.379836 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=10.24 mas, bpa=41.99 degrees ! Estimated noise=0.56935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010663 Jy ! Component: 100 - total flux cleaned = 0.0011104 Jy ! Component: 150 - total flux cleaned = 0.0011099 Jy ! Component: 200 - total flux cleaned = 0.00111047 Jy ! Total flux subtracted in 200 components = 0.00111047 Jy ! Clean residual min=-0.003314 max=0.002681 Jy/beam ! Clean residual mean=-0.000004 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.146334 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 68 components and 0.146334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061898Jy sigma=1.378283 ! Fit after self-cal, rms=0.061896Jy sigma=1.378266 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45439e-05 Jy ! Component: 100 - total flux cleaned = -1.84407e-05 Jy ! Component: 150 - total flux cleaned = -6.60566e-05 Jy ! Component: 200 - total flux cleaned = -8.82879e-05 Jy ! Total flux subtracted in 200 components = -8.82879e-05 Jy ! Clean residual min=-0.003257 max=0.002685 Jy/beam ! Clean residual mean=-0.000004 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.146246 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.146246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061880Jy sigma=1.377779 ! Fit after self-cal, rms=0.061880Jy sigma=1.377756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061880Jy sigma=1.377756 ! Fit after self-cal, rms=0.062257Jy sigma=1.377278 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=10.23 mas, bpa=42.01 degrees ! Estimated noise=0.573157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973311 Jy ! Component: 100 - total flux cleaned = 0.00100039 Jy ! Component: 150 - total flux cleaned = 0.000999699 Jy ! Component: 200 - total flux cleaned = 0.000998571 Jy ! Total flux subtracted in 200 components = 0.000998571 Jy ! Clean residual min=-0.003334 max=0.002737 Jy/beam ! Clean residual mean=-0.000004 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.147244 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 89 components and 0.147244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062238Jy sigma=1.376369 ! Fit after self-cal, rms=0.062237Jy sigma=1.376356 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.46552e-05 Jy ! Component: 100 - total flux cleaned = -3.76752e-05 Jy ! Component: 150 - total flux cleaned = -5.77919e-05 Jy ! Component: 200 - total flux cleaned = -0.000114516 Jy ! Total flux subtracted in 200 components = -0.000114516 Jy ! Clean residual min=-0.003249 max=0.002749 Jy/beam ! Clean residual mean=-0.000004 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.14713 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.14713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062226Jy sigma=1.376028 ! Fit after self-cal, rms=0.062227Jy sigma=1.376016 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062227Jy sigma=1.376016 ! Fit after self-cal, rms=0.062500Jy sigma=1.375789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.37 mas, bmaj=10.67 mas, bpa=38.01 degrees ! Estimated noise=0.709718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.33984e-05 Jy ! Component: 100 - total flux cleaned = -1.59913e-05 Jy ! Component: 150 - total flux cleaned = -7.70323e-05 Jy ! Component: 200 - total flux cleaned = -9.98436e-05 Jy ! Total flux subtracted in 200 components = -9.98436e-05 Jy ! Clean residual min=-0.002858 max=0.003045 Jy/beam ! Clean residual mean=-0.000011 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.14703 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.14703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062512Jy sigma=1.375338 ! Fit after self-cal, rms=0.062505Jy sigma=1.375294 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37312e-05 Jy ! Component: 100 - total flux cleaned = -6.13791e-05 Jy ! Component: 150 - total flux cleaned = -0.000129545 Jy ! Component: 200 - total flux cleaned = -0.000175423 Jy ! Total flux subtracted in 200 components = -0.000175423 Jy ! Clean residual min=-0.002826 max=0.003039 Jy/beam ! Clean residual mean=-0.000011 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.146855 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.146855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062514Jy sigma=1.375318 ! Fit after self-cal, rms=0.062512Jy sigma=1.375309 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=10.23 mas, bpa=42.02 degrees ! Estimated noise=0.575827 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.076 x 10.23 at 42.02 degrees (North through East) ! Clean map min=-0.0042061 max=0.1426 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=9.807 mas, bpa=42.21 degrees ! Estimated noise=0.888088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110104 Jy ! Component: 100 - total flux cleaned = 0.13439 Jy ! Component: 150 - total flux cleaned = 0.142636 Jy ! Component: 200 - total flux cleaned = 0.145673 Jy ! Total flux subtracted in 200 components = 0.145673 Jy ! Clean residual min=-0.005270 max=0.004701 Jy/beam ! Clean residual mean=-0.000007 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.145673 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.145673 Jy ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=10.23 mas, bpa=42.02 degrees ! Estimated noise=0.575827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244002 Jy ! Component: 100 - total flux cleaned = 0.00250452 Jy ! Component: 150 - total flux cleaned = 0.00231118 Jy ! Component: 200 - total flux cleaned = 0.00238648 Jy ! Total flux subtracted in 200 components = 0.00238648 Jy ! Clean residual min=-0.004179 max=0.002922 Jy/beam ! Clean residual mean=-0.000005 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.14806 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.14806 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.37 mas, bmaj=10.67 mas, bpa=38.01 degrees ! Estimated noise=0.709718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000624765 Jy ! Component: 100 - total flux cleaned = -0.000855019 Jy ! Component: 150 - total flux cleaned = -0.000743661 Jy ! Component: 200 - total flux cleaned = -0.000794322 Jy ! Total flux subtracted in 200 components = -0.000794322 Jy ! Clean residual min=-0.003073 max=0.003100 Jy/beam ! Clean residual mean=-0.000011 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.147265 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18089e-06 Jy ! Component: 100 - total flux cleaned = -2.26859e-06 Jy ! Component: 150 - total flux cleaned = -2.75754e-06 Jy ! Component: 200 - total flux cleaned = -1.9533e-06 Jy ! Total flux subtracted in 200 components = -1.9533e-06 Jy ! Clean residual min=-0.002883 max=0.003069 Jy/beam ! Clean residual mean=-0.000011 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.147264 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 70 components and 0.147264 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=10.23 mas, bpa=42.02 degrees ! Estimated noise=0.575827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110476 Jy ! Component: 100 - total flux cleaned = 0.00158188 Jy ! Component: 150 - total flux cleaned = 0.00161961 Jy ! Component: 200 - total flux cleaned = 0.00155051 Jy ! Total flux subtracted in 200 components = 0.00155051 Jy ! Clean residual min=-0.003336 max=0.002767 Jy/beam ! Clean residual mean=-0.000004 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.148814 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.148814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062526Jy sigma=1.375825 ! Fit after self-cal, rms=0.062527Jy sigma=1.375773 wmodel /J1656+5321_S_map.mod ! wmodel: Unable to open new model file: /J1656+5321_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1656+5321_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.076 x 10.23 at 42.02 degrees (North through East) ! Clean map min=-0.0041345 max=0.14284 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1656+5321_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.142839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000793383 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.66632 1.66632 3.33265 6.66529 13.3306 26.6612 53.3223 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.142 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 180.037 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1656+5321_S_dfm.log closed on Thu May 19 21:54:09 2016