! Started logfile: /scr/pima/bg219g_uvs/J1639+5357_X_dfm.log on Thu May 19 21:53:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1639+5357_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1639+5357_X_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.886772 visibilities/baseline/integration-bin.
! Found source: J1639+5357
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10056 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1639+5357_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016619Jy  sigma=21.673405
! Fit after  self-cal, rms=0.855474Jy  sigma=18.147396
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6442 mas, bmaj=2.72 mas, bpa=40.09 degrees
! Estimated noise=0.754463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107709 Jy
! Component: 100  -  total flux cleaned = 0.141455 Jy
! Total flux subtracted in 100 components = 0.141455 Jy
! Clean residual min=-0.008971 max=0.015253 Jy/beam
! Clean residual mean=0.000035 rms=0.002414 Jy/beam
! Combined flux in latest and established models = 0.141455 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.141455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085167Jy  sigma=1.657189
! Fit after  self-cal, rms=0.085103Jy  sigma=1.655800
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172291 Jy
! Component: 100  -  total flux cleaned = 0.0285541 Jy
! Total flux subtracted in 100 components = 0.0285541 Jy
! Clean residual min=-0.006891 max=0.007092 Jy/beam
! Clean residual mean=0.000017 rms=0.001586 Jy/beam
! Combined flux in latest and established models = 0.170009 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 26 components and 0.170009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080448Jy  sigma=1.542629
! Fit after  self-cal, rms=0.080434Jy  sigma=1.541880
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.859 mas, bmaj=2.655 mas, bpa=40.27 degrees
! Estimated noise=0.350539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110914 Jy
! Component: 100  -  total flux cleaned = 0.017773 Jy
! Component: 150  -  total flux cleaned = 0.0220863 Jy
! Component: 200  -  total flux cleaned = 0.0249553 Jy
! Total flux subtracted in 200 components = 0.0249553 Jy
! Clean residual min=-0.003043 max=0.003800 Jy/beam
! Clean residual mean=0.000023 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.194964 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 38 components and 0.194964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078818Jy  sigma=1.502363
! Fit after  self-cal, rms=0.078795Jy  sigma=1.501647
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.859 x 2.655 at 40.27 degrees (North through East)
! Clean map  min=-0.00279  max=0.14892 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.01     KP        0.96     
!   LA        1.07     MK        0.93     NL        1.01     OV        0.97     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.02     KP        1.01     
!   LA        0.92     MK        0.95     NL        1.06     OV        0.97     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.03     KP        0.98     
!   LA        0.99     MK        0.95     NL        1.00     OV        0.95     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.04     KP        1.02     
!   LA        0.95     MK        1.03     NL        1.04     OV        0.96     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        0.97     KP        0.96     
!   LA        0.97     MK        0.96     NL        1.06     OV        1.01     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.03     KP        1.00     
!   LA        0.98     MK        0.98     NL        1.03     OV        0.97     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.06     HN        0.98     KP        1.04     
!   LA        0.95     MK        0.97     NL        1.03     OV        0.95     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        0.99     
!   LA        1.01     MK        1.04     NL        0.99     OV        0.97     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.07     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.02     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.98     KP        0.97     
!   LA        1.00     MK        0.99     NL        1.03     OV        0.98     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.06     HN        1.01     KP        0.99     
!   LA        0.91     MK        1.02     NL        1.04     OV        0.95     
!   PT        1.01     SC        1.12     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.13     HN        1.02     KP        1.08     
!   LA        0.91     MK        0.93     NL        1.01     OV        0.95     
!   PT        0.90     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.078795Jy  sigma=1.501647
! Fit after  self-cal, rms=0.078121Jy  sigma=1.489967
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8622 mas, bmaj=2.669 mas, bpa=40.27 degrees
! Estimated noise=0.34907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.21398e-05 Jy
! Component: 100  -  total flux cleaned = 0.000336676 Jy
! Component: 150  -  total flux cleaned = 0.000586963 Jy
! Component: 200  -  total flux cleaned = 0.000719284 Jy
! Total flux subtracted in 200 components = 0.000719284 Jy
! Clean residual min=-0.002516 max=0.002501 Jy/beam
! Clean residual mean=0.000003 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.195683 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.195683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078082Jy  sigma=1.489167
! Fit after  self-cal, rms=0.078105Jy  sigma=1.488916
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078105Jy  sigma=1.488916
! Fit after  self-cal, rms=0.078158Jy  sigma=1.488878
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8617 mas, bmaj=2.668 mas, bpa=40.3 degrees
! Estimated noise=0.349241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147418 Jy
! Component: 100  -  total flux cleaned = 0.000363612 Jy
! Component: 150  -  total flux cleaned = 0.000477969 Jy
! Component: 200  -  total flux cleaned = 0.000558808 Jy
! Total flux subtracted in 200 components = 0.000558808 Jy
! Clean residual min=-0.002525 max=0.002455 Jy/beam
! Clean residual mean=0.000003 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.196242 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 63 components and 0.196242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078141Jy  sigma=1.488554
! Fit after  self-cal, rms=0.078140Jy  sigma=1.488522
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.30237e-05 Jy
! Component: 100  -  total flux cleaned = 9.91257e-05 Jy
! Component: 150  -  total flux cleaned = 0.000116644 Jy
! Component: 200  -  total flux cleaned = 0.000150184 Jy
! Total flux subtracted in 200 components = 0.000150184 Jy
! Clean residual min=-0.002531 max=0.002457 Jy/beam
! Clean residual mean=0.000003 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.196392 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 70 components and 0.196392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078131Jy  sigma=1.488371
! Fit after  self-cal, rms=0.078131Jy  sigma=1.488359
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078131Jy  sigma=1.488359
! Fit after  self-cal, rms=0.078136Jy  sigma=1.488317
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8605 mas, bmaj=2.668 mas, bpa=40.34 degrees
! Estimated noise=0.349213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000367525 Jy
! Component: 100  -  total flux cleaned = 0.000421116 Jy
! Component: 150  -  total flux cleaned = 0.000470767 Jy
! Component: 200  -  total flux cleaned = 0.000486563 Jy
! Total flux subtracted in 200 components = 0.000486563 Jy
! Clean residual min=-0.002522 max=0.002425 Jy/beam
! Clean residual mean=0.000003 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.196879 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.196879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078128Jy  sigma=1.488179
! Fit after  self-cal, rms=0.078127Jy  sigma=1.488177
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.52242e-05 Jy
! Component: 100  -  total flux cleaned = 5.04222e-05 Jy
! Component: 150  -  total flux cleaned = 7.91682e-05 Jy
! Component: 200  -  total flux cleaned = 9.29201e-05 Jy
! Total flux subtracted in 200 components = 9.29201e-05 Jy
! Clean residual min=-0.002520 max=0.002434 Jy/beam
! Clean residual mean=0.000002 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.196972 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.196972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078122Jy  sigma=1.488085
! Fit after  self-cal, rms=0.078121Jy  sigma=1.488082
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078121Jy  sigma=1.488082
! Fit after  self-cal, rms=0.078131Jy  sigma=1.488057
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.94 mas, bmaj=2.919 mas, bpa=41.25 degrees
! Estimated noise=0.447495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000874299 Jy
! Component: 100  -  total flux cleaned = 0.00100493 Jy
! Component: 150  -  total flux cleaned = 0.00100204 Jy
! Component: 200  -  total flux cleaned = 0.0010598 Jy
! Total flux subtracted in 200 components = 0.0010598 Jy
! Clean residual min=-0.002232 max=0.002744 Jy/beam
! Clean residual mean=0.000002 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.198032 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 83 components and 0.198032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078135Jy  sigma=1.488203
! Fit after  self-cal, rms=0.078135Jy  sigma=1.488164
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.47157e-05 Jy
! Component: 100  -  total flux cleaned = 1.17834e-06 Jy
! Component: 150  -  total flux cleaned = 1.26838e-05 Jy
! Component: 200  -  total flux cleaned = 1.20609e-05 Jy
! Total flux subtracted in 200 components = 1.20609e-05 Jy
! Clean residual min=-0.002210 max=0.002732 Jy/beam
! Clean residual mean=0.000002 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.198044 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 85 components and 0.198044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078141Jy  sigma=1.488305
! Fit after  self-cal, rms=0.078141Jy  sigma=1.488296
! Inverting map 
! Added new window around map position (2.6, 17.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223036 Jy
! Component: 100  -  total flux cleaned = 0.00260613 Jy
! Component: 150  -  total flux cleaned = 0.00275238 Jy
! Component: 200  -  total flux cleaned = 0.00279318 Jy
! Total flux subtracted in 200 components = 0.00279318 Jy
! Clean residual min=-0.001828 max=0.001696 Jy/beam
! Clean residual mean=-0.000011 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.200837 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.200837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078069Jy  sigma=1.486539
! Fit after  self-cal, rms=0.078064Jy  sigma=1.486481
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8593 mas, bmaj=2.668 mas, bpa=40.37 degrees
! Estimated noise=0.349226 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8593 x 2.668 at 40.37 degrees (North through East)
! Clean map  min=-0.0019809  max=0.14858 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6425 mas, bmaj=2.736 mas, bpa=40.15 degrees
! Estimated noise=0.751077 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107201 Jy
! Component: 100  -  total flux cleaned = 0.141066 Jy
! Component: 150  -  total flux cleaned = 0.1583 Jy
! Component: 200  -  total flux cleaned = 0.169706 Jy
! Total flux subtracted in 200 components = 0.169706 Jy
! Clean residual min=-0.006286 max=0.006953 Jy/beam
! Clean residual mean=0.000016 rms=0.001515 Jy/beam
! Combined flux in latest and established models = 0.169706 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.169706 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8593 mas, bmaj=2.668 mas, bpa=40.37 degrees
! Estimated noise=0.349226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108417 Jy
! Component: 100  -  total flux cleaned = 0.0172299 Jy
! Component: 150  -  total flux cleaned = 0.0214271 Jy
! Component: 200  -  total flux cleaned = 0.0238563 Jy
! Total flux subtracted in 200 components = 0.0238563 Jy
! Clean residual min=-0.002813 max=0.002664 Jy/beam
! Clean residual mean=0.000015 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.193562 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 40 components and 0.193562 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.94 mas, bmaj=2.919 mas, bpa=41.25 degrees
! Estimated noise=0.447495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369428 Jy
! Component: 100  -  total flux cleaned = 0.00557717 Jy
! Component: 150  -  total flux cleaned = 0.00633773 Jy
! Component: 200  -  total flux cleaned = 0.00658497 Jy
! Total flux subtracted in 200 components = 0.00658497 Jy
! Clean residual min=-0.002050 max=0.001932 Jy/beam
! Clean residual mean=-0.000003 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.200147 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158754 Jy
! Component: 100  -  total flux cleaned = 0.000297772 Jy
! Component: 150  -  total flux cleaned = 0.00041718 Jy
! Component: 200  -  total flux cleaned = 0.000453594 Jy
! Total flux subtracted in 200 components = 0.000453594 Jy
! Clean residual min=-0.001784 max=0.001778 Jy/beam
! Clean residual mean=-0.000009 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.200601 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 98 components and 0.200601 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8593 mas, bmaj=2.668 mas, bpa=40.37 degrees
! Estimated noise=0.349226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205108 Jy
! Component: 100  -  total flux cleaned = -0.000259288 Jy
! Component: 150  -  total flux cleaned = -0.000302274 Jy
! Component: 200  -  total flux cleaned = -0.00022106 Jy
! Total flux subtracted in 200 components = -0.00022106 Jy
! Clean residual min=-0.001991 max=0.001753 Jy/beam
! Clean residual mean=-0.000004 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.20038 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.20038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078026Jy  sigma=1.485623
! Fit after  self-cal, rms=0.078020Jy  sigma=1.485504
wmodel /J1639+5357_X_map.mod
! wmodel: Unable to open new model file: /J1639+5357_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1639+5357_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8593 x 2.668 at 40.37 degrees (North through East)
! Clean map  min=-0.0018499  max=0.148 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1639+5357_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.148002 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000440613 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.893124 0.893124 1.78625 3.5725 7.145 14.29 28.58 57.16
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.148 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  335.899 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1639+5357_X_dfm.log closed on Thu May 19 21:54:00 2016