! Started logfile: /scr/pima/bg219g_uvs/J1632+1615_S_dfm.log on Thu May 19 21:53:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219g_uvs/J1632+1615_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1632+1615_S_uva.fits
! AN table 1: 31 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.879032 visibilities/baseline/integration-bin.
! Found source: J1632+1615
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3924 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1632+1615_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016319Jy  sigma=23.621092
! Fit after  self-cal, rms=0.902300Jy  sigma=20.900714
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.551 mas, bmaj=6.885 mas, bpa=6.371 degrees
! Estimated noise=0.945987 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0744369 Jy
! Component: 100  -  total flux cleaned = 0.091048 Jy
! Total flux subtracted in 100 components = 0.091048 Jy
! Clean residual min=-0.006120 max=0.007778 Jy/beam
! Clean residual mean=0.000004 rms=0.001786 Jy/beam
! Combined flux in latest and established models = 0.091048 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.091048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061088Jy  sigma=1.343599
! Fit after  self-cal, rms=0.061071Jy  sigma=1.343300
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.18 mas, bmaj=7.607 mas, bpa=5.921 degrees
! Estimated noise=0.528687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101276 Jy
! Component: 100  -  total flux cleaned = 0.0146634 Jy
! Component: 150  -  total flux cleaned = 0.0170785 Jy
! Component: 200  -  total flux cleaned = 0.0185665 Jy
! Total flux subtracted in 200 components = 0.0185665 Jy
! Clean residual min=-0.005975 max=0.003633 Jy/beam
! Clean residual mean=-0.000002 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.109614 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 25 components and 0.109614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059639Jy  sigma=1.304518
! Fit after  self-cal, rms=0.059645Jy  sigma=1.303952
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.18 x 7.607 at 5.921 degrees (North through East)
! Clean map  min=-0.0058613  max=0.099724 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.99     KP        1.04     LA        0.93     
!   MK        0.97     NL        0.85     OV        0.95     PT        1.02     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.05     KP        1.01     LA        0.99     
!   MK        1.05     NL        0.84     OV        1.03     PT        1.04     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.07     KP        1.05     LA        1.02     
!   MK        1.07     NL        1.01     OV        1.05     PT        1.06     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059645Jy  sigma=1.303952
! Fit after  self-cal, rms=0.058840Jy  sigma=1.289865
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=7.647 mas, bpa=6.01 degrees
! Estimated noise=0.530924 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502032 Jy
! Component: 100  -  total flux cleaned = 0.000651259 Jy
! Component: 150  -  total flux cleaned = 0.000824356 Jy
! Component: 200  -  total flux cleaned = 0.000865332 Jy
! Total flux subtracted in 200 components = 0.000865332 Jy
! Clean residual min=-0.003749 max=0.002737 Jy/beam
! Clean residual mean=-0.000001 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.11048 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.11048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058812Jy  sigma=1.289293
! Fit after  self-cal, rms=0.058809Jy  sigma=1.289044
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058809Jy  sigma=1.289044
! Fit after  self-cal, rms=0.058910Jy  sigma=1.288961
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.193 mas, bmaj=7.646 mas, bpa=5.958 degrees
! Estimated noise=0.532443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000479413 Jy
! Component: 100  -  total flux cleaned = 0.000602024 Jy
! Component: 150  -  total flux cleaned = 0.000636839 Jy
! Component: 200  -  total flux cleaned = 0.000684766 Jy
! Total flux subtracted in 200 components = 0.000684766 Jy
! Clean residual min=-0.003756 max=0.002711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.111165 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.111165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058897Jy  sigma=1.288639
! Fit after  self-cal, rms=0.058896Jy  sigma=1.288607
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154819 Jy
! Component: 100  -  total flux cleaned = 0.000169249 Jy
! Component: 150  -  total flux cleaned = 0.000182769 Jy
! Component: 200  -  total flux cleaned = 0.000194646 Jy
! Total flux subtracted in 200 components = 0.000194646 Jy
! Clean residual min=-0.003768 max=0.002690 Jy/beam
! Clean residual mean=-0.000002 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.111359 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 34 components and 0.111359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058890Jy  sigma=1.288458
! Fit after  self-cal, rms=0.058889Jy  sigma=1.288435
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058889Jy  sigma=1.288435
! Fit after  self-cal, rms=0.059073Jy  sigma=1.288373
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.191 mas, bmaj=7.644 mas, bpa=5.925 degrees
! Estimated noise=0.534404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000462118 Jy
! Component: 100  -  total flux cleaned = 0.000540501 Jy
! Component: 150  -  total flux cleaned = 0.000587316 Jy
! Component: 200  -  total flux cleaned = 0.000619049 Jy
! Total flux subtracted in 200 components = 0.000619049 Jy
! Clean residual min=-0.003773 max=0.002693 Jy/beam
! Clean residual mean=-0.000002 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.111978 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 38 components and 0.111978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059068Jy  sigma=1.288186
! Fit after  self-cal, rms=0.059068Jy  sigma=1.288168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127208 Jy
! Component: 100  -  total flux cleaned = 0.000116252 Jy
! Component: 150  -  total flux cleaned = 0.000125693 Jy
! Component: 200  -  total flux cleaned = 0.000125576 Jy
! Total flux subtracted in 200 components = 0.000125576 Jy
! Clean residual min=-0.003779 max=0.002700 Jy/beam
! Clean residual mean=-0.000002 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.112104 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.112104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059065Jy  sigma=1.288088
! Fit after  self-cal, rms=0.059065Jy  sigma=1.288077
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059065Jy  sigma=1.288077
! Fit after  self-cal, rms=0.059223Jy  sigma=1.288043
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.795 mas, bmaj=11.51 mas, bpa=-7.224 degrees
! Estimated noise=0.668645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192826 Jy
! Component: 100  -  total flux cleaned = 9.21649e-05 Jy
! Component: 150  -  total flux cleaned = 2.14224e-05 Jy
! Component: 200  -  total flux cleaned = -4.73423e-06 Jy
! Total flux subtracted in 200 components = -4.73423e-06 Jy
! Clean residual min=-0.003331 max=0.002708 Jy/beam
! Clean residual mean=-0.000003 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.112099 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.112099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059226Jy  sigma=1.288246
! Fit after  self-cal, rms=0.059223Jy  sigma=1.288046
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.23943e-05 Jy
! Component: 100  -  total flux cleaned = -2.05466e-05 Jy
! Component: 150  -  total flux cleaned = -3.43985e-05 Jy
! Component: 200  -  total flux cleaned = -4.65061e-05 Jy
! Total flux subtracted in 200 components = -4.65061e-05 Jy
! Clean residual min=-0.003327 max=0.002694 Jy/beam
! Clean residual mean=-0.000003 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.112053 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 68 components and 0.112053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059230Jy  sigma=1.288208
! Fit after  self-cal, rms=0.059229Jy  sigma=1.288071
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.189 mas, bmaj=7.643 mas, bpa=5.906 degrees
! Estimated noise=0.535958 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.189 x 7.643 at 5.906 degrees (North through East)
! Clean map  min=-0.0036811  max=0.10068 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.559 mas, bmaj=6.898 mas, bpa=6.403 degrees
! Estimated noise=0.961346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0754822 Jy
! Component: 100  -  total flux cleaned = 0.0925345 Jy
! Component: 150  -  total flux cleaned = 0.0993141 Jy
! Component: 200  -  total flux cleaned = 0.103122 Jy
! Total flux subtracted in 200 components = 0.103122 Jy
! Clean residual min=-0.005271 max=0.005707 Jy/beam
! Clean residual mean=0.000003 rms=0.001458 Jy/beam
! Combined flux in latest and established models = 0.103122 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.103122 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.189 mas, bmaj=7.643 mas, bpa=5.906 degrees
! Estimated noise=0.535958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13, -33).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487339 Jy
! Component: 100  -  total flux cleaned = 0.00719988 Jy
! Component: 150  -  total flux cleaned = 0.00778934 Jy
! Component: 200  -  total flux cleaned = 0.00815741 Jy
! Total flux subtracted in 200 components = 0.00815741 Jy
! Clean residual min=-0.003860 max=0.003010 Jy/beam
! Clean residual mean=-0.000001 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.11128 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 0.11128 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.795 mas, bmaj=11.51 mas, bpa=-7.224 degrees
! Estimated noise=0.668645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000678132 Jy
! Component: 100  -  total flux cleaned = 0.000755408 Jy
! Component: 150  -  total flux cleaned = 0.000723821 Jy
! Component: 200  -  total flux cleaned = 0.000695019 Jy
! Total flux subtracted in 200 components = 0.000695019 Jy
! Clean residual min=-0.003372 max=0.002578 Jy/beam
! Clean residual mean=-0.000003 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.111975 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.88985e-05 Jy
! Component: 100  -  total flux cleaned = -6.98084e-05 Jy
! Component: 150  -  total flux cleaned = -7.04791e-05 Jy
! Component: 200  -  total flux cleaned = -9.01079e-05 Jy
! Total flux subtracted in 200 components = -9.01079e-05 Jy
! Clean residual min=-0.003338 max=0.002528 Jy/beam
! Clean residual mean=-0.000003 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.111885 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 65 components and 0.111885 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.189 mas, bmaj=7.643 mas, bpa=5.906 degrees
! Estimated noise=0.535958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000461502 Jy
! Component: 100  -  total flux cleaned = -0.00042585 Jy
! Component: 150  -  total flux cleaned = -0.000360454 Jy
! Component: 200  -  total flux cleaned = -0.000269195 Jy
! Total flux subtracted in 200 components = -0.000269195 Jy
! Clean residual min=-0.003834 max=0.002820 Jy/beam
! Clean residual mean=-0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.111615 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 0.111615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059217Jy  sigma=1.287579
! Fit after  self-cal, rms=0.059205Jy  sigma=1.287256
wmodel /J1632+1615_S_map.mod
! wmodel: Unable to open new model file: /J1632+1615_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1632+1615_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.189 x 7.643 at 5.906 degrees (North through East)
! Clean map  min=-0.0036673  max=0.10016 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1632+1615_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10016 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000765929 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.29411 2.29411 4.58822 9.17644 18.3529 36.7058 73.4115
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  130.769 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1632+1615_S_dfm.log closed on Thu May 19 21:53:49 2016