! Started logfile: /scr/pima/bg219g_uvs/J1622+1426_X_dfm.log on Thu May 19 21:53:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1622+1426_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1622+1426_X_uva.fits
! AN table 1: 20 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.921111 visibilities/baseline/integration-bin.
! Found source: J1622+1426
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 9948 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1622+1426_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006947Jy  sigma=22.422281
! Fit after  self-cal, rms=0.927619Jy  sigma=20.565720
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7055 mas, bmaj=1.8 mas, bpa=2.786 degrees
! Estimated noise=0.608106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525664 Jy
! Component: 100  -  total flux cleaned = 0.0732344 Jy
! Total flux subtracted in 100 components = 0.0732344 Jy
! Clean residual min=-0.005088 max=0.009658 Jy/beam
! Clean residual mean=-0.000000 rms=0.001502 Jy/beam
! Combined flux in latest and established models = 0.0732344 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0732344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076908Jy  sigma=1.505054
! Fit after  self-cal, rms=0.076071Jy  sigma=1.488430
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125952 Jy
! Component: 100  -  total flux cleaned = 0.0194188 Jy
! Total flux subtracted in 100 components = 0.0194188 Jy
! Clean residual min=-0.003742 max=0.004342 Jy/beam
! Clean residual mean=0.000000 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.0926532 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.0926532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073309Jy  sigma=1.411288
! Fit after  self-cal, rms=0.073280Jy  sigma=1.410334
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8934 mas, bmaj=2.19 mas, bpa=0.2378 degrees
! Estimated noise=0.336253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00720014 Jy
! Component: 100  -  total flux cleaned = 0.0109532 Jy
! Component: 150  -  total flux cleaned = 0.01346 Jy
! Component: 200  -  total flux cleaned = 0.0153697 Jy
! Total flux subtracted in 200 components = 0.0153697 Jy
! Clean residual min=-0.002354 max=0.003236 Jy/beam
! Clean residual mean=0.000000 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.108023 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 37 components and 0.108023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072589Jy  sigma=1.391947
! Fit after  self-cal, rms=0.072577Jy  sigma=1.391646
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8934 x 2.19 at 0.2378 degrees (North through East)
! Clean map  min=-0.0022613  max=0.0752 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.90     HN        1.08     KP        0.95     
!   LA        1.02     MK        1.15     NL        0.99     OV        1.00     
!   PT        1.03     SC        1.17     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        0.87     KP        1.01     
!   LA        0.95     MK        1.11     NL        1.04     OV        0.94     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.92     HN        1.07     KP        1.01     
!   LA        0.86     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.02     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.93     KP        1.05     
!   LA        1.09     MK        1.16     NL        1.04     OV        0.99     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.99     KP        0.93     
!   LA        0.97     MK        0.98     NL        1.05     OV        1.01     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.06     
!   LA        0.93     MK        1.04     NL        0.99     OV        0.95     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.97     KP        1.00     
!   LA        0.94     MK        1.01     NL        1.02     OV        0.96     
!   PT        1.07     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.93     HN        1.05     KP        1.02     
!   LA        1.01     MK        1.10     NL        1.05     OV        0.97     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.92     KP        1.01     
!   LA        0.91     MK        0.98     NL        1.02     OV        1.02     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.92     HN        1.02     KP        1.03     
!   LA        0.90     MK        1.06     NL        0.96     OV        1.01     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        0.93     KP        1.08     
!   LA        0.84     MK        1.11     NL        0.96     OV        0.97     
!   PT        0.92     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        0.93     KP        0.96     
!   LA        0.97     MK        1.05     NL        1.02     OV        0.92     
!   PT        1.03     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.072577Jy  sigma=1.391646
! Fit after  self-cal, rms=0.070784Jy  sigma=1.384369
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9037 mas, bmaj=2.212 mas, bpa=0.4019 degrees
! Estimated noise=0.334352 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000625523 Jy
! Component: 100  -  total flux cleaned = -0.000627892 Jy
! Component: 150  -  total flux cleaned = -0.000596455 Jy
! Component: 200  -  total flux cleaned = -0.000596725 Jy
! Total flux subtracted in 200 components = -0.000596725 Jy
! Clean residual min=-0.002241 max=0.002631 Jy/beam
! Clean residual mean=0.000000 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.107426 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.107426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070743Jy  sigma=1.383812
! Fit after  self-cal, rms=0.070750Jy  sigma=1.383490
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070750Jy  sigma=1.383490
! Fit after  self-cal, rms=0.070660Jy  sigma=1.383444
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9048 mas, bmaj=2.213 mas, bpa=0.4462 degrees
! Estimated noise=0.33429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00030464 Jy
! Component: 100  -  total flux cleaned = -0.0003059 Jy
! Component: 150  -  total flux cleaned = -0.000306556 Jy
! Component: 200  -  total flux cleaned = -0.00030682 Jy
! Total flux subtracted in 200 components = -0.00030682 Jy
! Clean residual min=-0.002223 max=0.002537 Jy/beam
! Clean residual mean=0.000000 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.107119 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 54 components and 0.107119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070640Jy  sigma=1.383237
! Fit after  self-cal, rms=0.070638Jy  sigma=1.383223
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021681 Jy
! Component: 100  -  total flux cleaned = 0.00308925 Jy
! Component: 150  -  total flux cleaned = 0.00333647 Jy
! Component: 200  -  total flux cleaned = 0.00353901 Jy
! Total flux subtracted in 200 components = 0.00353901 Jy
! Clean residual min=-0.001951 max=0.002137 Jy/beam
! Clean residual mean=0.000000 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.110658 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.110658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070552Jy  sigma=1.381682
! Fit after  self-cal, rms=0.070536Jy  sigma=1.381566
! Inverting map 
! Added new window around map position (-4.6, -23.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101948 Jy
! Component: 100  -  total flux cleaned = 0.00102063 Jy
! Component: 150  -  total flux cleaned = 0.00115505 Jy
! Component: 200  -  total flux cleaned = 0.00139323 Jy
! Total flux subtracted in 200 components = 0.00139323 Jy
! Clean residual min=-0.001745 max=0.001939 Jy/beam
! Clean residual mean=0.000000 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.112052 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.112052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070464Jy  sigma=1.380225
! Fit after  self-cal, rms=0.070451Jy  sigma=1.380057
! Inverting map 
! Added new window around map position (29.6, 27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146073 Jy
! Component: 100  -  total flux cleaned = 0.00172602 Jy
! Component: 150  -  total flux cleaned = 0.00201274 Jy
! Component: 200  -  total flux cleaned = 0.00237331 Jy
! Total flux subtracted in 200 components = 0.00237331 Jy
! Clean residual min=-0.001670 max=0.001591 Jy/beam
! Clean residual mean=-0.000000 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.114425 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 117 components and 0.114425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070406Jy  sigma=1.379124
! Fit after  self-cal, rms=0.070402Jy  sigma=1.379037
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070402Jy  sigma=1.379037
! Fit after  self-cal, rms=0.069869Jy  sigma=1.378879
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9057 mas, bmaj=2.215 mas, bpa=0.4855 degrees
! Estimated noise=0.333214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000420486 Jy
! Component: 100  -  total flux cleaned = 0.000651672 Jy
! Component: 150  -  total flux cleaned = 0.000813884 Jy
! Component: 200  -  total flux cleaned = 0.000942532 Jy
! Total flux subtracted in 200 components = 0.000942532 Jy
! Clean residual min=-0.001553 max=0.001601 Jy/beam
! Clean residual mean=-0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.115367 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 127 components and 0.115367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069850Jy  sigma=1.378549
! Fit after  self-cal, rms=0.069848Jy  sigma=1.378522
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174374 Jy
! Component: 100  -  total flux cleaned = 0.00027447 Jy
! Component: 150  -  total flux cleaned = 0.000387343 Jy
! Component: 200  -  total flux cleaned = 0.000440953 Jy
! Total flux subtracted in 200 components = 0.000440953 Jy
! Clean residual min=-0.001519 max=0.001560 Jy/beam
! Clean residual mean=-0.000000 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.115808 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 135 components and 0.115808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069836Jy  sigma=1.378344
! Fit after  self-cal, rms=0.069835Jy  sigma=1.378335
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069835Jy  sigma=1.378335
! Fit after  self-cal, rms=0.069593Jy  sigma=1.378300
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.005 mas, bmaj=3.106 mas, bpa=-7.746 degrees
! Estimated noise=0.407646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00030986 Jy
! Component: 100  -  total flux cleaned = -0.000284239 Jy
! Component: 150  -  total flux cleaned = -0.000214396 Jy
! Component: 200  -  total flux cleaned = -0.000192228 Jy
! Total flux subtracted in 200 components = -0.000192228 Jy
! Clean residual min=-0.001667 max=0.001952 Jy/beam
! Clean residual mean=0.000000 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.115616 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.115616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069591Jy  sigma=1.378238
! Fit after  self-cal, rms=0.069588Jy  sigma=1.378210
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.5122e-05 Jy
! Component: 100  -  total flux cleaned = -1.30965e-05 Jy
! Component: 150  -  total flux cleaned = 4.36121e-05 Jy
! Component: 200  -  total flux cleaned = 4.40285e-05 Jy
! Total flux subtracted in 200 components = 4.40285e-05 Jy
! Clean residual min=-0.001597 max=0.001878 Jy/beam
! Clean residual mean=0.000000 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.11566 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 161 components and 0.11566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069588Jy  sigma=1.378197
! Fit after  self-cal, rms=0.069587Jy  sigma=1.378178
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9058 mas, bmaj=2.215 mas, bpa=0.5006 degrees
! Estimated noise=0.332842 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9058 x 2.215 at 0.5006 degrees (North through East)
! Clean map  min=-0.0013947  max=0.074512 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7138 mas, bmaj=1.819 mas, bpa=3.171 degrees
! Estimated noise=0.612188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0531186 Jy
! Component: 100  -  total flux cleaned = 0.0752153 Jy
! Component: 150  -  total flux cleaned = 0.086509 Jy
! Component: 200  -  total flux cleaned = 0.0928584 Jy
! Total flux subtracted in 200 components = 0.0928584 Jy
! Clean residual min=-0.003665 max=0.004311 Jy/beam
! Clean residual mean=-0.000000 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.0928584 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0928584 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9058 mas, bmaj=2.215 mas, bpa=0.5006 degrees
! Estimated noise=0.332842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622602 Jy
! Component: 100  -  total flux cleaned = 0.00941422 Jy
! Component: 150  -  total flux cleaned = 0.0113651 Jy
! Component: 200  -  total flux cleaned = 0.01267 Jy
! Total flux subtracted in 200 components = 0.01267 Jy
! Clean residual min=-0.002458 max=0.001912 Jy/beam
! Clean residual mean=-0.000000 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.105528 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 32 components and 0.105528 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.005 mas, bmaj=3.106 mas, bpa=-7.746 degrees
! Estimated noise=0.407646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264346 Jy
! Component: 100  -  total flux cleaned = 0.0040726 Jy
! Component: 150  -  total flux cleaned = 0.00522198 Jy
! Component: 200  -  total flux cleaned = 0.00622533 Jy
! Total flux subtracted in 200 components = 0.00622533 Jy
! Clean residual min=-0.001957 max=0.001903 Jy/beam
! Clean residual mean=-0.000000 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.111754 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000637206 Jy
! Component: 100  -  total flux cleaned = 0.00118154 Jy
! Component: 150  -  total flux cleaned = 0.00146569 Jy
! Component: 200  -  total flux cleaned = 0.00174571 Jy
! Total flux subtracted in 200 components = 0.00174571 Jy
! Clean residual min=-0.001712 max=0.001832 Jy/beam
! Clean residual mean=-0.000000 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.113499 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 88 components and 0.113499 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9058 mas, bmaj=2.215 mas, bpa=0.5006 degrees
! Estimated noise=0.332842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.401e-05 Jy
! Component: 100  -  total flux cleaned = -0.000128878 Jy
! Component: 150  -  total flux cleaned = -0.000258187 Jy
! Component: 200  -  total flux cleaned = -0.000146543 Jy
! Total flux subtracted in 200 components = -0.000146543 Jy
! Clean residual min=-0.001624 max=0.001557 Jy/beam
! Clean residual mean=-0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.113353 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.113353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069662Jy  sigma=1.379305
! Fit after  self-cal, rms=0.069651Jy  sigma=1.379147
wmodel /J1622+1426_X_map.mod
! wmodel: Unable to open new model file: /J1622+1426_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1622+1426_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9058 x 2.215 at 0.5006 degrees (North through East)
! Clean map  min=-0.0017024  max=0.074928 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1622+1426_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0749281 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000383927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.53718 1.53718 3.07437 6.14873 12.2975 24.5949 49.1899 98.3797
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.074 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  195.162 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1622+1426_X_dfm.log closed on Thu May 19 21:53:39 2016