! Started logfile: /scr/pima/bg219g_uvs/J1611+1856_S_dfm.log on Thu May 19 21:53:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219g_uvs/J1611+1856_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1611+1856_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.940476 visibilities/baseline/integration-bin.
! Found source: J1611+1856
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1896 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1611+1856_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015574Jy  sigma=23.562929
! Fit after  self-cal, rms=0.895517Jy  sigma=20.770919
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.574 mas, bmaj=6.947 mas, bpa=6.645 degrees
! Estimated noise=0.946401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0802757 Jy
! Component: 100  -  total flux cleaned = 0.0987553 Jy
! Total flux subtracted in 100 components = 0.0987553 Jy
! Clean residual min=-0.007356 max=0.009518 Jy/beam
! Clean residual mean=0.000006 rms=0.002005 Jy/beam
! Combined flux in latest and established models = 0.0987553 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0987553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061602Jy  sigma=1.364004
! Fit after  self-cal, rms=0.061569Jy  sigma=1.363082
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.092 mas, bmaj=7.517 mas, bpa=5.622 degrees
! Estimated noise=0.792088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133156 Jy
! Component: 100  -  total flux cleaned = 0.0212969 Jy
! Component: 150  -  total flux cleaned = 0.0266279 Jy
! Component: 200  -  total flux cleaned = 0.0302633 Jy
! Total flux subtracted in 200 components = 0.0302633 Jy
! Clean residual min=-0.006445 max=0.005755 Jy/beam
! Clean residual mean=0.000004 rms=0.001541 Jy/beam
! Combined flux in latest and established models = 0.129019 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 0.129019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058654Jy  sigma=1.278151
! Fit after  self-cal, rms=0.058640Jy  sigma=1.276877
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.092 x 7.517 at 5.622 degrees (North through East)
! Clean map  min=-0.0062642  max=0.10309 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     HN        1.06     KP        1.02     LA        1.02     
!   MK        0.94     NL        0.88     OV        1.03     PT        0.95     
!   SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     HN        1.02     KP        0.99     LA        0.98     
!   MK        1.12     NL        0.87     OV        0.95     PT        1.02     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.10     KP        1.07     LA        1.02     
!   MK        1.14     NL        0.97     OV        1.04     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.058640Jy  sigma=1.276877
! Fit after  self-cal, rms=0.059092Jy  sigma=1.256191
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.093 mas, bmaj=7.565 mas, bpa=6.178 degrees
! Estimated noise=0.805531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250484 Jy
! Component: 100  -  total flux cleaned = 0.00393418 Jy
! Component: 150  -  total flux cleaned = 0.00466543 Jy
! Component: 200  -  total flux cleaned = 0.00482273 Jy
! Total flux subtracted in 200 components = 0.00482273 Jy
! Clean residual min=-0.004463 max=0.004306 Jy/beam
! Clean residual mean=0.000002 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.133841 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.133841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058972Jy  sigma=1.253516
! Fit after  self-cal, rms=0.059019Jy  sigma=1.253056
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059019Jy  sigma=1.253056
! Fit after  self-cal, rms=0.059390Jy  sigma=1.251977
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=7.53 mas, bpa=6.315 degrees
! Estimated noise=0.813873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190324 Jy
! Component: 100  -  total flux cleaned = 0.00304131 Jy
! Component: 150  -  total flux cleaned = 0.00352618 Jy
! Component: 200  -  total flux cleaned = 0.00369024 Jy
! Total flux subtracted in 200 components = 0.00369024 Jy
! Clean residual min=-0.004493 max=0.004384 Jy/beam
! Clean residual mean=0.000002 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.137531 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.137531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059318Jy  sigma=1.250338
! Fit after  self-cal, rms=0.059319Jy  sigma=1.250259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354009 Jy
! Component: 100  -  total flux cleaned = 0.000327555 Jy
! Component: 150  -  total flux cleaned = 0.000375969 Jy
! Component: 200  -  total flux cleaned = 0.000445226 Jy
! Total flux subtracted in 200 components = 0.000445226 Jy
! Clean residual min=-0.004466 max=0.004362 Jy/beam
! Clean residual mean=0.000002 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.137977 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 0.137977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059296Jy  sigma=1.249845
! Fit after  self-cal, rms=0.059298Jy  sigma=1.249802
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059298Jy  sigma=1.249802
! Fit after  self-cal, rms=0.059579Jy  sigma=1.249121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=7.503 mas, bpa=6.382 degrees
! Estimated noise=0.820179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144439 Jy
! Component: 100  -  total flux cleaned = 0.0023112 Jy
! Component: 150  -  total flux cleaned = 0.00258891 Jy
! Component: 200  -  total flux cleaned = 0.00269972 Jy
! Total flux subtracted in 200 components = 0.00269972 Jy
! Clean residual min=-0.004511 max=0.004399 Jy/beam
! Clean residual mean=0.000002 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.140676 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.140676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059538Jy  sigma=1.248142
! Fit after  self-cal, rms=0.059538Jy  sigma=1.248100
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144424 Jy
! Component: 100  -  total flux cleaned = 0.000146475 Jy
! Component: 150  -  total flux cleaned = 0.000166267 Jy
! Component: 200  -  total flux cleaned = 0.000206357 Jy
! Total flux subtracted in 200 components = 0.000206357 Jy
! Clean residual min=-0.004492 max=0.004393 Jy/beam
! Clean residual mean=0.000002 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.140883 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.140883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059521Jy  sigma=1.247818
! Fit after  self-cal, rms=0.059522Jy  sigma=1.247788
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059522Jy  sigma=1.247788
! Fit after  self-cal, rms=0.059769Jy  sigma=1.247443
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.583 mas, bmaj=10.83 mas, bpa=-5.509 degrees
! Estimated noise=1.07719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231152 Jy
! Component: 100  -  total flux cleaned = 0.00229851 Jy
! Component: 150  -  total flux cleaned = 0.00222266 Jy
! Component: 200  -  total flux cleaned = 0.00217532 Jy
! Total flux subtracted in 200 components = 0.00217532 Jy
! Clean residual min=-0.004411 max=0.005349 Jy/beam
! Clean residual mean=0.000004 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.143058 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 56 components and 0.143058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059804Jy  sigma=1.247662
! Fit after  self-cal, rms=0.059767Jy  sigma=1.246821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.71309e-05 Jy
! Component: 100  -  total flux cleaned = -2.54503e-05 Jy
! Component: 150  -  total flux cleaned = -0.000117203 Jy
! Component: 200  -  total flux cleaned = -0.000157205 Jy
! Total flux subtracted in 200 components = -0.000157205 Jy
! Clean residual min=-0.004351 max=0.005263 Jy/beam
! Clean residual mean=0.000005 rms=0.001492 Jy/beam
! Combined flux in latest and established models = 0.142901 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 56 components and 0.142901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059794Jy  sigma=1.247518
! Fit after  self-cal, rms=0.059760Jy  sigma=1.246717
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=7.485 mas, bpa=6.429 degrees
! Estimated noise=0.82498 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.055 x 7.485 at 6.429 degrees (North through East)
! Clean map  min=-0.0040502  max=0.10459 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.552 mas, bmaj=6.908 mas, bpa=7.488 degrees
! Estimated noise=0.982202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0831192 Jy
! Component: 100  -  total flux cleaned = 0.103948 Jy
! Component: 150  -  total flux cleaned = 0.114083 Jy
! Component: 200  -  total flux cleaned = 0.12068 Jy
! Total flux subtracted in 200 components = 0.12068 Jy
! Clean residual min=-0.006280 max=0.005641 Jy/beam
! Clean residual mean=0.000004 rms=0.001435 Jy/beam
! Combined flux in latest and established models = 0.12068 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.12068 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=7.485 mas, bpa=6.429 degrees
! Estimated noise=0.82498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00795307 Jy
! Component: 100  -  total flux cleaned = 0.0131476 Jy
! Component: 150  -  total flux cleaned = 0.0168058 Jy
! Component: 200  -  total flux cleaned = 0.019471 Jy
! Total flux subtracted in 200 components = 0.019471 Jy
! Clean residual min=-0.004075 max=0.004121 Jy/beam
! Clean residual mean=0.000003 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.140151 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 58 components and 0.140151 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.583 mas, bmaj=10.83 mas, bpa=-5.509 degrees
! Estimated noise=1.07719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226383 Jy
! Component: 100  -  total flux cleaned = 0.00284479 Jy
! Component: 150  -  total flux cleaned = 0.00310321 Jy
! Component: 200  -  total flux cleaned = 0.00306624 Jy
! Total flux subtracted in 200 components = 0.00306624 Jy
! Clean residual min=-0.003882 max=0.004119 Jy/beam
! Clean residual mean=0.000003 rms=0.001202 Jy/beam
! Combined flux in latest and established models = 0.143218 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.34582e-05 Jy
! Component: 100  -  total flux cleaned = -0.000127542 Jy
! Component: 150  -  total flux cleaned = -0.00021427 Jy
! Component: 200  -  total flux cleaned = -0.000268181 Jy
! Total flux subtracted in 200 components = -0.000268181 Jy
! Clean residual min=-0.003702 max=0.004195 Jy/beam
! Clean residual mean=0.000003 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.142949 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 110 components and 0.142949 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=7.485 mas, bpa=6.429 degrees
! Estimated noise=0.82498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000653231 Jy
! Component: 100  -  total flux cleaned = 0.00051449 Jy
! Component: 150  -  total flux cleaned = 0.000394821 Jy
! Component: 200  -  total flux cleaned = 0.000393343 Jy
! Total flux subtracted in 200 components = 0.000393343 Jy
! Clean residual min=-0.003715 max=0.004070 Jy/beam
! Clean residual mean=0.000001 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.143343 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 125 components and 0.143343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059505Jy  sigma=1.241593
! Fit after  self-cal, rms=0.059485Jy  sigma=1.240913
wmodel /J1611+1856_S_map.mod
! wmodel: Unable to open new model file: /J1611+1856_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1611+1856_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.055 x 7.485 at 6.429 degrees (North through East)
! Clean map  min=-0.0035127  max=0.1065 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1611+1856_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106495 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000945946 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.66475 2.66475 5.32951 10.659 21.318 42.6361 85.2721
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  112.58 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1611+1856_S_dfm.log closed on Thu May 19 21:53:13 2016