! Started logfile: /scr/pima/bg219g_uvs/J1606+1814_S_uvs.log on Thu Apr 7 07:19:24 2016 obs /scr/pima/bg219g_uvs/J1606+1814_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1606+1814_S_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.927778 visibilities/baseline/integration-bin. ! Found source: J1606+1814 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 2672 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1606+1814_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.019704Jy sigma=23.658462 ! Fit after self-cal, rms=0.868345Jy sigma=20.086042 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.523 mas, bmaj=6.995 mas, bpa=2.073 degrees ! Estimated noise=0.817924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989319 Jy ! Component: 100 - total flux cleaned = 0.127066 Jy ! Total flux subtracted in 100 components = 0.127066 Jy ! Clean residual min=-0.007625 max=0.012464 Jy/beam ! Clean residual mean=0.000011 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 0.127066 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.127066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065509Jy sigma=1.449865 ! Fit after self-cal, rms=0.065420Jy sigma=1.446864 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=7.506 mas, bpa=4.394 degrees ! Estimated noise=0.611171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176769 Jy ! Component: 100 - total flux cleaned = 0.0267429 Jy ! Component: 150 - total flux cleaned = 0.0324298 Jy ! Component: 200 - total flux cleaned = 0.0361602 Jy ! Total flux subtracted in 200 components = 0.0361602 Jy ! Clean residual min=-0.009337 max=0.006546 Jy/beam ! Clean residual mean=0.000000 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.163226 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 0.163226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060880Jy sigma=1.321601 ! Fit after self-cal, rms=0.060876Jy sigma=1.321030 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.077 x 7.506 at 4.394 degrees (North through East) ! Clean map min=-0.0089473 max=0.12994 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.06 KP 0.97 LA 0.95 ! MK 1.04 NL 0.87 OV 1.05 PT 1.02 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 1.11 KP 0.98 LA 0.99 ! MK 1.04 NL 1.06 OV 1.05 PT 1.05 ! SC 1.12 ! ! ! Fit before self-cal, rms=0.060876Jy sigma=1.321030 ! Fit after self-cal, rms=0.061148Jy sigma=1.302292 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=7.555 mas, bpa=4.428 degrees ! Estimated noise=0.623535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298462 Jy ! Component: 100 - total flux cleaned = 0.00475902 Jy ! Component: 150 - total flux cleaned = 0.0058464 Jy ! Component: 200 - total flux cleaned = 0.00616885 Jy ! Total flux subtracted in 200 components = 0.00616885 Jy ! Clean residual min=-0.007285 max=0.004941 Jy/beam ! Clean residual mean=-0.000004 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.169395 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.169395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061005Jy sigma=1.298137 ! Fit after self-cal, rms=0.061009Jy sigma=1.297860 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061009Jy sigma=1.297860 ! Fit after self-cal, rms=0.061421Jy sigma=1.296817 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=7.54 mas, bpa=4.422 degrees ! Estimated noise=0.628772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018147 Jy ! Component: 100 - total flux cleaned = 0.0027576 Jy ! Component: 150 - total flux cleaned = 0.00304373 Jy ! Component: 200 - total flux cleaned = 0.00328976 Jy ! Total flux subtracted in 200 components = 0.00328976 Jy ! Clean residual min=-0.007311 max=0.004895 Jy/beam ! Clean residual mean=-0.000004 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.172685 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.172685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061366Jy sigma=1.295249 ! Fit after self-cal, rms=0.061360Jy sigma=1.295125 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154106 Jy ! Component: 100 - total flux cleaned = 0.000278252 Jy ! Component: 150 - total flux cleaned = 0.000386252 Jy ! Component: 200 - total flux cleaned = 0.00048286 Jy ! Total flux subtracted in 200 components = 0.00048286 Jy ! Clean residual min=-0.007247 max=0.004842 Jy/beam ! Clean residual mean=-0.000005 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.173167 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.173167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061339Jy sigma=1.294657 ! Fit after self-cal, rms=0.061335Jy sigma=1.294542 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061335Jy sigma=1.294542 ! Fit after self-cal, rms=0.061324Jy sigma=1.281699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=7.542 mas, bpa=4.394 degrees ! Estimated noise=0.632452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565242 Jy ! Component: 100 - total flux cleaned = 0.00078101 Jy ! Component: 150 - total flux cleaned = 0.000951902 Jy ! Component: 200 - total flux cleaned = 0.00102212 Jy ! Total flux subtracted in 200 components = 0.00102212 Jy ! Clean residual min=-0.005361 max=0.004207 Jy/beam ! Clean residual mean=-0.000003 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.17419 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.17419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061303Jy sigma=1.281209 ! Fit after self-cal, rms=0.061316Jy sigma=1.281029 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.43679e-05 Jy ! Component: 100 - total flux cleaned = 0.000160082 Jy ! Component: 150 - total flux cleaned = 0.000199796 Jy ! Component: 200 - total flux cleaned = 0.000224199 Jy ! Total flux subtracted in 200 components = 0.000224199 Jy ! Clean residual min=-0.005386 max=0.004190 Jy/beam ! Clean residual mean=-0.000003 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.174414 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.174414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061307Jy sigma=1.280806 ! Fit after self-cal, rms=0.061303Jy sigma=1.280733 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061303Jy sigma=1.280733 ! Fit after self-cal, rms=0.061491Jy sigma=1.280592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.728 mas, bmaj=10.78 mas, bpa=-5.389 degrees ! Estimated noise=0.805681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744045 Jy ! Component: 100 - total flux cleaned = 0.000602637 Jy ! Component: 150 - total flux cleaned = 0.000441396 Jy ! Component: 200 - total flux cleaned = 0.000337748 Jy ! Total flux subtracted in 200 components = 0.000337748 Jy ! Clean residual min=-0.005114 max=0.004787 Jy/beam ! Clean residual mean=-0.000006 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.174752 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 63 components and 0.174752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061527Jy sigma=1.281188 ! Fit after self-cal, rms=0.061510Jy sigma=1.280804 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.50838e-05 Jy ! Component: 100 - total flux cleaned = 4.13631e-05 Jy ! Component: 150 - total flux cleaned = -4.81786e-05 Jy ! Component: 200 - total flux cleaned = -0.000120664 Jy ! Total flux subtracted in 200 components = -0.000120664 Jy ! Clean residual min=-0.005071 max=0.004631 Jy/beam ! Clean residual mean=-0.000006 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.174631 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.174631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061530Jy sigma=1.281163 ! Fit after self-cal, rms=0.061512Jy sigma=1.280799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.543 mas, bpa=4.336 degrees ! Estimated noise=0.634776 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.543 at 4.336 degrees (North through East) ! Clean map min=-0.0048805 max=0.13137 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=7.051 mas, bpa=1.95 degrees ! Estimated noise=0.860609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10385 Jy ! Component: 100 - total flux cleaned = 0.133998 Jy ! Component: 150 - total flux cleaned = 0.147493 Jy ! Component: 200 - total flux cleaned = 0.15513 Jy ! Total flux subtracted in 200 components = 0.15513 Jy ! Clean residual min=-0.006134 max=0.005893 Jy/beam ! Clean residual mean=0.000005 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.155131 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.155131 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.543 mas, bpa=4.336 degrees ! Estimated noise=0.634776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791656 Jy ! Component: 100 - total flux cleaned = 0.00997347 Jy ! Component: 150 - total flux cleaned = 0.0117291 Jy ! Component: 200 - total flux cleaned = 0.0131491 Jy ! Total flux subtracted in 200 components = 0.0131491 Jy ! Clean residual min=-0.004632 max=0.003369 Jy/beam ! Clean residual mean=0.000000 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.16828 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 56 components and 0.16828 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.728 mas, bmaj=10.78 mas, bpa=-5.389 degrees ! Estimated noise=0.805681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223046 Jy ! Component: 100 - total flux cleaned = 0.0029806 Jy ! Component: 150 - total flux cleaned = 0.00344242 Jy ! Component: 200 - total flux cleaned = 0.00356289 Jy ! Total flux subtracted in 200 components = 0.00356289 Jy ! Clean residual min=-0.003853 max=0.002979 Jy/beam ! Clean residual mean=-0.000004 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.171843 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.344e-05 Jy ! Component: 100 - total flux cleaned = 9.03985e-05 Jy ! Component: 150 - total flux cleaned = 0.000114214 Jy ! Component: 200 - total flux cleaned = 0.000134755 Jy ! Total flux subtracted in 200 components = 0.000134755 Jy ! Clean residual min=-0.003826 max=0.003093 Jy/beam ! Clean residual mean=-0.000004 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.171977 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 106 components and 0.171977 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.543 mas, bpa=4.336 degrees ! Estimated noise=0.634776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000343286 Jy ! Component: 100 - total flux cleaned = -0.000517308 Jy ! Component: 150 - total flux cleaned = -0.000552539 Jy ! Component: 200 - total flux cleaned = -0.000488804 Jy ! Total flux subtracted in 200 components = -0.000488804 Jy ! Clean residual min=-0.004489 max=0.003000 Jy/beam ! Clean residual mean=-0.000002 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.171489 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.171489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061141Jy sigma=1.271343 ! Fit after self-cal, rms=0.061093Jy sigma=1.270489 wmodel /scr/pima/bg219g_uvs/J1606+1814_S_map.mod ! Writing 120 model components to file: /scr/pima/bg219g_uvs/J1606+1814_S_map.mod wobs /scr/pima/bg219g_uvs/J1606+1814_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219g_uvs/J1606+1814_S_uvs.fits wwins /scr/pima/bg219g_uvs/J1606+1814_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219g_uvs/J1606+1814_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184499 Jy ! Component: 100 - total flux cleaned = -0.0032334 Jy ! Component: 150 - total flux cleaned = -0.00413526 Jy ! Component: 200 - total flux cleaned = -0.00464621 Jy ! Component: 250 - total flux cleaned = -0.00500288 Jy ! Component: 300 - total flux cleaned = -0.00530008 Jy ! Component: 350 - total flux cleaned = -0.00554447 Jy ! Component: 400 - total flux cleaned = -0.00574275 Jy ! Component: 450 - total flux cleaned = -0.00581954 Jy ! Component: 500 - total flux cleaned = -0.00589476 Jy ! Component: 550 - total flux cleaned = -0.00596868 Jy ! Component: 600 - total flux cleaned = -0.00604048 Jy ! Component: 650 - total flux cleaned = -0.00607562 Jy ! Component: 700 - total flux cleaned = -0.00614464 Jy ! Component: 750 - total flux cleaned = -0.00624615 Jy ! Component: 800 - total flux cleaned = -0.00624547 Jy ! Component: 850 - total flux cleaned = -0.00631101 Jy ! Component: 900 - total flux cleaned = -0.00637488 Jy ! Component: 950 - total flux cleaned = -0.00640673 Jy ! Component: 1000 - total flux cleaned = -0.00656084 Jy ! Component: 1050 - total flux cleaned = -0.00659049 Jy ! Component: 1100 - total flux cleaned = -0.00662041 Jy ! Component: 1150 - total flux cleaned = -0.00662097 Jy ! Component: 1200 - total flux cleaned = -0.0067647 Jy ! Component: 1250 - total flux cleaned = -0.00665195 Jy ! Component: 1300 - total flux cleaned = -0.00673627 Jy ! Component: 1350 - total flux cleaned = -0.00681814 Jy ! Component: 1400 - total flux cleaned = -0.00679075 Jy ! Component: 1450 - total flux cleaned = -0.00676408 Jy ! Component: 1500 - total flux cleaned = -0.00684234 Jy ! Component: 1550 - total flux cleaned = -0.0068934 Jy ! Component: 1600 - total flux cleaned = -0.00686806 Jy ! Component: 1650 - total flux cleaned = -0.00689317 Jy ! Component: 1700 - total flux cleaned = -0.00689299 Jy ! Component: 1750 - total flux cleaned = -0.00694171 Jy ! Component: 1800 - total flux cleaned = -0.00694185 Jy ! Component: 1850 - total flux cleaned = -0.00691822 Jy ! Component: 1900 - total flux cleaned = -0.0069885 Jy ! Component: 1950 - total flux cleaned = -0.00703476 Jy ! Component: 2000 - total flux cleaned = -0.00705744 Jy ! Component: 2050 - total flux cleaned = -0.00714754 Jy ! Component: 2100 - total flux cleaned = -0.00721416 Jy ! Component: 2150 - total flux cleaned = -0.00725797 Jy ! Component: 2200 - total flux cleaned = -0.00732324 Jy ! Component: 2250 - total flux cleaned = -0.00730161 Jy ! Component: 2300 - total flux cleaned = -0.00734457 Jy ! Component: 2350 - total flux cleaned = -0.00728144 Jy ! Component: 2400 - total flux cleaned = -0.00732338 Jy ! Component: 2450 - total flux cleaned = -0.00734404 Jy ! Component: 2500 - total flux cleaned = -0.00736445 Jy ! Component: 2550 - total flux cleaned = -0.00736434 Jy ! Component: 2600 - total flux cleaned = -0.00740451 Jy ! Component: 2650 - total flux cleaned = -0.00744444 Jy ! Component: 2700 - total flux cleaned = -0.00748389 Jy ! Component: 2750 - total flux cleaned = -0.00754279 Jy ! Component: 2800 - total flux cleaned = -0.00760125 Jy ! Component: 2850 - total flux cleaned = -0.0076786 Jy ! Component: 2900 - total flux cleaned = -0.00771706 Jy ! Component: 2950 - total flux cleaned = -0.00783133 Jy ! Component: 3000 - total flux cleaned = -0.00790682 Jy ! Component: 3050 - total flux cleaned = -0.00788817 Jy ! Component: 3100 - total flux cleaned = -0.00800037 Jy ! Component: 3150 - total flux cleaned = -0.00807435 Jy ! Component: 3200 - total flux cleaned = -0.00814791 Jy ! Component: 3250 - total flux cleaned = -0.00822088 Jy ! Component: 3300 - total flux cleaned = -0.00829357 Jy ! Component: 3350 - total flux cleaned = -0.00838386 Jy ! Component: 3400 - total flux cleaned = -0.00847361 Jy ! Component: 3450 - total flux cleaned = -0.00854508 Jy ! Component: 3500 - total flux cleaned = -0.00870501 Jy ! Component: 3550 - total flux cleaned = -0.00881105 Jy ! Component: 3600 - total flux cleaned = -0.00888139 Jy ! Component: 3650 - total flux cleaned = -0.00896889 Jy ! Component: 3700 - total flux cleaned = -0.00912596 Jy ! Component: 3750 - total flux cleaned = -0.00926505 Jy ! Component: 3800 - total flux cleaned = -0.00940355 Jy ! Component: 3850 - total flux cleaned = -0.00954156 Jy ! Component: 3900 - total flux cleaned = -0.00966197 Jy ! Component: 3950 - total flux cleaned = -0.00985036 Jy ! Component: 4000 - total flux cleaned = -0.00998689 Jy ! Component: 4050 - total flux cleaned = -0.010106 Jy ! Total flux subtracted in 4096 components = -0.0102755 Jy ! Clean residual min=-0.001019 max=0.001108 Jy/beam ! Clean residual mean=-0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.161213 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 373 components and 0.161213 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219g_uvs/J1606+1814_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.543 at 4.336 degrees (North through East) ! Clean map min=-0.0042608 max=0.13545 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1606+1814_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13545 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.650492 0.650492 1.30098 2.60197 5.20393 10.4079 20.8157 41.6315 83.2629 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.135 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 461.189 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1606+1814_S_uvs.log closed on Thu Apr 7 07:19:28 2016