! Started logfile: /scr/pima/bg219g_uvs/J1606+1814_S_dfm.log on Thu May 19 21:52:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219g_uvs/J1606+1814_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1606+1814_S_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.927778 visibilities/baseline/integration-bin.
! Found source: J1606+1814
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2672 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1606+1814_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.019704Jy  sigma=23.658462
! Fit after  self-cal, rms=0.868345Jy  sigma=20.086042
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.523 mas, bmaj=6.995 mas, bpa=2.073 degrees
! Estimated noise=0.817924 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0989319 Jy
! Component: 100  -  total flux cleaned = 0.127066 Jy
! Total flux subtracted in 100 components = 0.127066 Jy
! Clean residual min=-0.007625 max=0.012464 Jy/beam
! Clean residual mean=0.000011 rms=0.002349 Jy/beam
! Combined flux in latest and established models = 0.127066 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.127066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065509Jy  sigma=1.449865
! Fit after  self-cal, rms=0.065420Jy  sigma=1.446864
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=7.506 mas, bpa=4.394 degrees
! Estimated noise=0.611171 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176769 Jy
! Component: 100  -  total flux cleaned = 0.0267429 Jy
! Component: 150  -  total flux cleaned = 0.0324298 Jy
! Component: 200  -  total flux cleaned = 0.0361602 Jy
! Total flux subtracted in 200 components = 0.0361602 Jy
! Clean residual min=-0.009337 max=0.006546 Jy/beam
! Clean residual mean=0.000000 rms=0.001776 Jy/beam
! Combined flux in latest and established models = 0.163226 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 46 components and 0.163226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060880Jy  sigma=1.321601
! Fit after  self-cal, rms=0.060876Jy  sigma=1.321030
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.077 x 7.506 at 4.394 degrees (North through East)
! Clean map  min=-0.0089473  max=0.12994 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.06     KP        0.97     LA        0.95     
!   MK        1.04     NL        0.87     OV        1.05     PT        1.02     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.11     KP        0.98     LA        0.99     
!   MK        1.04     NL        1.06     OV        1.05     PT        1.05     
!   SC        1.12     
! 
! 
! Fit before self-cal, rms=0.060876Jy  sigma=1.321030
! Fit after  self-cal, rms=0.061148Jy  sigma=1.302292
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.097 mas, bmaj=7.555 mas, bpa=4.428 degrees
! Estimated noise=0.623535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298462 Jy
! Component: 100  -  total flux cleaned = 0.00475902 Jy
! Component: 150  -  total flux cleaned = 0.0058464 Jy
! Component: 200  -  total flux cleaned = 0.00616885 Jy
! Total flux subtracted in 200 components = 0.00616885 Jy
! Clean residual min=-0.007285 max=0.004941 Jy/beam
! Clean residual mean=-0.000004 rms=0.001448 Jy/beam
! Combined flux in latest and established models = 0.169395 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.169395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061005Jy  sigma=1.298137
! Fit after  self-cal, rms=0.061009Jy  sigma=1.297860
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061009Jy  sigma=1.297860
! Fit after  self-cal, rms=0.061421Jy  sigma=1.296817
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.54 mas, bpa=4.422 degrees
! Estimated noise=0.628772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018147 Jy
! Component: 100  -  total flux cleaned = 0.0027576 Jy
! Component: 150  -  total flux cleaned = 0.00304373 Jy
! Component: 200  -  total flux cleaned = 0.00328976 Jy
! Total flux subtracted in 200 components = 0.00328976 Jy
! Clean residual min=-0.007311 max=0.004895 Jy/beam
! Clean residual mean=-0.000004 rms=0.001448 Jy/beam
! Combined flux in latest and established models = 0.172685 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 0.172685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061366Jy  sigma=1.295249
! Fit after  self-cal, rms=0.061360Jy  sigma=1.295125
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154106 Jy
! Component: 100  -  total flux cleaned = 0.000278252 Jy
! Component: 150  -  total flux cleaned = 0.000386252 Jy
! Component: 200  -  total flux cleaned = 0.00048286 Jy
! Total flux subtracted in 200 components = 0.00048286 Jy
! Clean residual min=-0.007247 max=0.004842 Jy/beam
! Clean residual mean=-0.000005 rms=0.001439 Jy/beam
! Combined flux in latest and established models = 0.173167 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.173167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061339Jy  sigma=1.294657
! Fit after  self-cal, rms=0.061335Jy  sigma=1.294542
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061335Jy  sigma=1.294542
! Fit after  self-cal, rms=0.061324Jy  sigma=1.281699
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.542 mas, bpa=4.394 degrees
! Estimated noise=0.632452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565242 Jy
! Component: 100  -  total flux cleaned = 0.00078101 Jy
! Component: 150  -  total flux cleaned = 0.000951902 Jy
! Component: 200  -  total flux cleaned = 0.00102212 Jy
! Total flux subtracted in 200 components = 0.00102212 Jy
! Clean residual min=-0.005361 max=0.004207 Jy/beam
! Clean residual mean=-0.000003 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.17419 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 55 components and 0.17419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061303Jy  sigma=1.281209
! Fit after  self-cal, rms=0.061316Jy  sigma=1.281029
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.43679e-05 Jy
! Component: 100  -  total flux cleaned = 0.000160082 Jy
! Component: 150  -  total flux cleaned = 0.000199796 Jy
! Component: 200  -  total flux cleaned = 0.000224199 Jy
! Total flux subtracted in 200 components = 0.000224199 Jy
! Clean residual min=-0.005386 max=0.004190 Jy/beam
! Clean residual mean=-0.000003 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.174414 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.174414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061307Jy  sigma=1.280806
! Fit after  self-cal, rms=0.061303Jy  sigma=1.280733
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061303Jy  sigma=1.280733
! Fit after  self-cal, rms=0.061491Jy  sigma=1.280592
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.728 mas, bmaj=10.78 mas, bpa=-5.389 degrees
! Estimated noise=0.805681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744045 Jy
! Component: 100  -  total flux cleaned = 0.000602637 Jy
! Component: 150  -  total flux cleaned = 0.000441396 Jy
! Component: 200  -  total flux cleaned = 0.000337748 Jy
! Total flux subtracted in 200 components = 0.000337748 Jy
! Clean residual min=-0.005114 max=0.004787 Jy/beam
! Clean residual mean=-0.000006 rms=0.001317 Jy/beam
! Combined flux in latest and established models = 0.174752 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 63 components and 0.174752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061527Jy  sigma=1.281188
! Fit after  self-cal, rms=0.061510Jy  sigma=1.280804
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.50838e-05 Jy
! Component: 100  -  total flux cleaned = 4.13631e-05 Jy
! Component: 150  -  total flux cleaned = -4.81786e-05 Jy
! Component: 200  -  total flux cleaned = -0.000120664 Jy
! Total flux subtracted in 200 components = -0.000120664 Jy
! Clean residual min=-0.005071 max=0.004631 Jy/beam
! Clean residual mean=-0.000006 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 0.174631 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 66 components and 0.174631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061530Jy  sigma=1.281163
! Fit after  self-cal, rms=0.061512Jy  sigma=1.280799
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.086 mas, bmaj=7.543 mas, bpa=4.336 degrees
! Estimated noise=0.634776 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.086 x 7.543 at 4.336 degrees (North through East)
! Clean map  min=-0.0048805  max=0.13137 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.528 mas, bmaj=7.051 mas, bpa=1.95 degrees
! Estimated noise=0.860609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10385 Jy
! Component: 100  -  total flux cleaned = 0.133998 Jy
! Component: 150  -  total flux cleaned = 0.147493 Jy
! Component: 200  -  total flux cleaned = 0.15513 Jy
! Total flux subtracted in 200 components = 0.15513 Jy
! Clean residual min=-0.006134 max=0.005893 Jy/beam
! Clean residual mean=0.000005 rms=0.001441 Jy/beam
! Combined flux in latest and established models = 0.155131 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.155131 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.086 mas, bmaj=7.543 mas, bpa=4.336 degrees
! Estimated noise=0.634776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00791656 Jy
! Component: 100  -  total flux cleaned = 0.00997347 Jy
! Component: 150  -  total flux cleaned = 0.0117291 Jy
! Component: 200  -  total flux cleaned = 0.0131491 Jy
! Total flux subtracted in 200 components = 0.0131491 Jy
! Clean residual min=-0.004632 max=0.003369 Jy/beam
! Clean residual mean=0.000000 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.16828 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 56 components and 0.16828 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.728 mas, bmaj=10.78 mas, bpa=-5.389 degrees
! Estimated noise=0.805681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223046 Jy
! Component: 100  -  total flux cleaned = 0.0029806 Jy
! Component: 150  -  total flux cleaned = 0.00344242 Jy
! Component: 200  -  total flux cleaned = 0.00356289 Jy
! Total flux subtracted in 200 components = 0.00356289 Jy
! Clean residual min=-0.003853 max=0.002979 Jy/beam
! Clean residual mean=-0.000004 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.171843 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.344e-05 Jy
! Component: 100  -  total flux cleaned = 9.03985e-05 Jy
! Component: 150  -  total flux cleaned = 0.000114214 Jy
! Component: 200  -  total flux cleaned = 0.000134755 Jy
! Total flux subtracted in 200 components = 0.000134755 Jy
! Clean residual min=-0.003826 max=0.003093 Jy/beam
! Clean residual mean=-0.000004 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.171977 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 106 components and 0.171977 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.086 mas, bmaj=7.543 mas, bpa=4.336 degrees
! Estimated noise=0.634776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000343286 Jy
! Component: 100  -  total flux cleaned = -0.000517308 Jy
! Component: 150  -  total flux cleaned = -0.000552539 Jy
! Component: 200  -  total flux cleaned = -0.000488804 Jy
! Total flux subtracted in 200 components = -0.000488804 Jy
! Clean residual min=-0.004489 max=0.003000 Jy/beam
! Clean residual mean=-0.000002 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.171489 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 0.171489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061141Jy  sigma=1.271343
! Fit after  self-cal, rms=0.061093Jy  sigma=1.270489
wmodel /J1606+1814_S_map.mod
! wmodel: Unable to open new model file: /J1606+1814_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1606+1814_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.086 x 7.543 at 4.336 degrees (North through East)
! Clean map  min=-0.0054903  max=0.13564 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1606+1814_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.135636 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0008036 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.7774 1.7774 3.5548 7.10961 14.2192 28.4384 56.8769
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.135 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  168.785 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1606+1814_S_dfm.log closed on Thu May 19 21:52:42 2016