! Started logfile: /scr/pima/bg219g_uvs/J1604+1926_X_dfm.log on Thu May 19 21:52:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1604+1926_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1604+1926_X_uva.fits
! AN table 1: 26 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.877137 visibilities/baseline/integration-bin.
! Found source: J1604+1926
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 9852 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1604+1926_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007701Jy  sigma=21.906019
! Fit after  self-cal, rms=0.905590Jy  sigma=19.623774
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.641 mas, bmaj=1.815 mas, bpa=7.603 degrees
! Estimated noise=0.683082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.07049 Jy
! Component: 100  -  total flux cleaned = 0.0906793 Jy
! Total flux subtracted in 100 components = 0.0906793 Jy
! Clean residual min=-0.005748 max=0.009369 Jy/beam
! Clean residual mean=0.000004 rms=0.001610 Jy/beam
! Combined flux in latest and established models = 0.0906793 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0906793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078926Jy  sigma=1.545056
! Fit after  self-cal, rms=0.078597Jy  sigma=1.538780
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010827 Jy
! Component: 100  -  total flux cleaned = 0.0169054 Jy
! Total flux subtracted in 100 components = 0.0169054 Jy
! Clean residual min=-0.004125 max=0.004396 Jy/beam
! Clean residual mean=0.000002 rms=0.001082 Jy/beam
! Combined flux in latest and established models = 0.107585 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.107585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076851Jy  sigma=1.493379
! Fit after  self-cal, rms=0.076830Jy  sigma=1.492948
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7892 mas, bmaj=1.974 mas, bpa=9.185 degrees
! Estimated noise=0.353431 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489879 Jy
! Component: 100  -  total flux cleaned = 0.00746523 Jy
! Component: 150  -  total flux cleaned = 0.00904849 Jy
! Component: 200  -  total flux cleaned = 0.0101183 Jy
! Total flux subtracted in 200 components = 0.0101183 Jy
! Clean residual min=-0.002449 max=0.003028 Jy/beam
! Clean residual mean=0.000000 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.117703 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.117703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076540Jy  sigma=1.485052
! Fit after  self-cal, rms=0.076538Jy  sigma=1.484946
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7892 x 1.974 at 9.185 degrees (North through East)
! Clean map  min=-0.0022674  max=0.097123 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.05     KP        1.01     
!   LA        0.99     MK        0.93     OV        0.96     PT        1.00     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.98     KP        1.01     
!   LA        1.06     MK        0.96     OV        0.99     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        1.09     KP        1.00     
!   LA        0.96     MK        0.97     OV        1.00     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.01     OV        0.99     PT        1.03     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.06     OV        0.98     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.96     MK        0.99     OV        0.97     PT        0.92     
!   SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.95     KP        1.05     
!   LA        0.85     MK        1.05     OV        0.96     PT        0.95     
!   SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.04     KP        1.03     
!   LA        1.07     MK        1.04     OV        0.93     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.01     KP        1.08     
!   LA        0.98     MK        1.05     OV        0.99     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.92     KP        0.96     
!   LA        0.98     MK        1.01     OV        1.01     PT        0.90     
!   SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.89     KP        0.98     
!   LA        1.00     MK        1.05     OV        1.00     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.10     HN        0.95     KP        1.00     
!   LA        1.01     MK        1.03     OV        1.00     PT        0.94     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.076538Jy  sigma=1.484946
! Fit after  self-cal, rms=0.076096Jy  sigma=1.479112
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7911 mas, bmaj=1.991 mas, bpa=9.1 degrees
! Estimated noise=0.352589 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000459257 Jy
! Component: 100  -  total flux cleaned = -0.000583727 Jy
! Component: 150  -  total flux cleaned = -0.000635758 Jy
! Component: 200  -  total flux cleaned = -0.000697049 Jy
! Total flux subtracted in 200 components = -0.000697049 Jy
! Clean residual min=-0.002183 max=0.002897 Jy/beam
! Clean residual mean=0.000001 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.117006 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 42 components and 0.117006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076083Jy  sigma=1.478941
! Fit after  self-cal, rms=0.076107Jy  sigma=1.478745
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076107Jy  sigma=1.478745
! Fit after  self-cal, rms=0.076095Jy  sigma=1.478688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7912 mas, bmaj=1.995 mas, bpa=9.061 degrees
! Estimated noise=0.352605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000336276 Jy
! Component: 100  -  total flux cleaned = -0.000436266 Jy
! Component: 150  -  total flux cleaned = -0.000493242 Jy
! Component: 200  -  total flux cleaned = -0.000519734 Jy
! Total flux subtracted in 200 components = -0.000519734 Jy
! Clean residual min=-0.002169 max=0.002893 Jy/beam
! Clean residual mean=0.000001 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.116486 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 0.116486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076087Jy  sigma=1.478584
! Fit after  self-cal, rms=0.076086Jy  sigma=1.478577
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.6, -15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223657 Jy
! Component: 100  -  total flux cleaned = 0.00285393 Jy
! Component: 150  -  total flux cleaned = 0.00318191 Jy
! Component: 200  -  total flux cleaned = 0.00341206 Jy
! Total flux subtracted in 200 components = 0.00341206 Jy
! Clean residual min=-0.002008 max=0.002381 Jy/beam
! Clean residual mean=0.000001 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.119898 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.119898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075995Jy  sigma=1.476610
! Fit after  self-cal, rms=0.075981Jy  sigma=1.476464
! Inverting map 
! Added new window around map position (14, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203885 Jy
! Component: 100  -  total flux cleaned = 0.00261308 Jy
! Component: 150  -  total flux cleaned = 0.00275497 Jy
! Component: 200  -  total flux cleaned = 0.00288466 Jy
! Total flux subtracted in 200 components = 0.00288466 Jy
! Clean residual min=-0.001788 max=0.001926 Jy/beam
! Clean residual mean=0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.122783 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 80 components and 0.122783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075912Jy  sigma=1.475078
! Fit after  self-cal, rms=0.075903Jy  sigma=1.474944
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075903Jy  sigma=1.474944
! Fit after  self-cal, rms=0.074491Jy  sigma=1.475025
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7921 mas, bmaj=1.999 mas, bpa=9.169 degrees
! Estimated noise=0.347335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.9863e-05 Jy
! Component: 100  -  total flux cleaned = 0.000385708 Jy
! Component: 150  -  total flux cleaned = 0.000450005 Jy
! Component: 200  -  total flux cleaned = 0.000450419 Jy
! Total flux subtracted in 200 components = 0.000450419 Jy
! Clean residual min=-0.001731 max=0.001891 Jy/beam
! Clean residual mean=0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.123233 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 0.123233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074456Jy  sigma=1.474312
! Fit after  self-cal, rms=0.074454Jy  sigma=1.474266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18.8, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107167 Jy
! Component: 100  -  total flux cleaned = 0.00128869 Jy
! Component: 150  -  total flux cleaned = 0.00147735 Jy
! Component: 200  -  total flux cleaned = 0.00156206 Jy
! Total flux subtracted in 200 components = 0.00156206 Jy
! Clean residual min=-0.001482 max=0.001745 Jy/beam
! Clean residual mean=0.000000 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.124795 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 105 components and 0.124795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074408Jy  sigma=1.473260
! Fit after  self-cal, rms=0.074396Jy  sigma=1.473199
! Inverting map 
! Added new window around map position (-48.6, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000941478 Jy
! Component: 100  -  total flux cleaned = 0.000977255 Jy
! Component: 150  -  total flux cleaned = 0.00103694 Jy
! Component: 200  -  total flux cleaned = 0.00109192 Jy
! Total flux subtracted in 200 components = 0.00109192 Jy
! Clean residual min=-0.001348 max=0.001276 Jy/beam
! Clean residual mean=0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.125887 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 118 components and 0.125887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074356Jy  sigma=1.472271
! Fit after  self-cal, rms=0.074347Jy  sigma=1.472217
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074347Jy  sigma=1.472217
! Fit after  self-cal, rms=0.073493Jy  sigma=1.472321
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.394 mas, bmaj=2.798 mas, bpa=13.5 degrees
! Estimated noise=0.46385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000765815 Jy
! Component: 100  -  total flux cleaned = -0.000433601 Jy
! Component: 150  -  total flux cleaned = -0.000366884 Jy
! Component: 200  -  total flux cleaned = -0.000437228 Jy
! Total flux subtracted in 200 components = -0.000437228 Jy
! Clean residual min=-0.001188 max=0.001382 Jy/beam
! Clean residual mean=0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.12545 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 132 components and 0.12545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073485Jy  sigma=1.472104
! Fit after  self-cal, rms=0.073478Jy  sigma=1.472027
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.31623e-05 Jy
! Component: 100  -  total flux cleaned = -0.000147944 Jy
! Component: 150  -  total flux cleaned = -0.000220659 Jy
! Component: 200  -  total flux cleaned = -0.000260938 Jy
! Total flux subtracted in 200 components = -0.000260938 Jy
! Clean residual min=-0.001208 max=0.001330 Jy/beam
! Clean residual mean=0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.125189 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 147 components and 0.125189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073475Jy  sigma=1.471960
! Fit after  self-cal, rms=0.073474Jy  sigma=1.471951
! Inverting map 
! Added new window around map position (37.4, -36.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000875924 Jy
! Component: 100  -  total flux cleaned = 0.00134344 Jy
! Component: 150  -  total flux cleaned = 0.00155881 Jy
! Component: 200  -  total flux cleaned = 0.00160805 Jy
! Total flux subtracted in 200 components = 0.00160805 Jy
! Clean residual min=-0.000948 max=0.000876 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.126797 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 178 components and 0.126797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073462Jy  sigma=1.471616
! Fit after  self-cal, rms=0.073455Jy  sigma=1.471570
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7925 mas, bmaj=2 mas, bpa=9.229 degrees
! Estimated noise=0.344059 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7925 x 2 at 9.229 degrees (North through East)
! Clean map  min=-0.0013127  max=0.095469 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6439 mas, bmaj=1.833 mas, bpa=7.662 degrees
! Estimated noise=0.668824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0687932 Jy
! Component: 100  -  total flux cleaned = 0.0889227 Jy
! Component: 150  -  total flux cleaned = 0.0993123 Jy
! Component: 200  -  total flux cleaned = 0.105261 Jy
! Total flux subtracted in 200 components = 0.105261 Jy
! Clean residual min=-0.004045 max=0.003964 Jy/beam
! Clean residual mean=0.000002 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.105261 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.105261 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7925 mas, bmaj=2 mas, bpa=9.229 degrees
! Estimated noise=0.344059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464229 Jy
! Component: 100  -  total flux cleaned = 0.00717628 Jy
! Component: 150  -  total flux cleaned = 0.008985 Jy
! Component: 200  -  total flux cleaned = 0.0104859 Jy
! Total flux subtracted in 200 components = 0.0104859 Jy
! Clean residual min=-0.002056 max=0.002145 Jy/beam
! Clean residual mean=0.000000 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.115747 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 34 components and 0.115747 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.394 mas, bmaj=2.798 mas, bpa=13.5 degrees
! Estimated noise=0.46385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00263214 Jy
! Component: 100  -  total flux cleaned = 0.00420898 Jy
! Component: 150  -  total flux cleaned = 0.00546318 Jy
! Component: 200  -  total flux cleaned = 0.00644927 Jy
! Total flux subtracted in 200 components = 0.00644927 Jy
! Clean residual min=-0.001737 max=0.001306 Jy/beam
! Clean residual mean=0.000000 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.122196 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000782249 Jy
! Component: 100  -  total flux cleaned = 0.00148929 Jy
! Component: 150  -  total flux cleaned = 0.00183286 Jy
! Component: 200  -  total flux cleaned = 0.00200442 Jy
! Total flux subtracted in 200 components = 0.00200442 Jy
! Clean residual min=-0.001363 max=0.001063 Jy/beam
! Clean residual mean=-0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.1242 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 98 components and 0.1242 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7925 mas, bmaj=2 mas, bpa=9.229 degrees
! Estimated noise=0.344059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105367 Jy
! Component: 100  -  total flux cleaned = 0.00135679 Jy
! Component: 150  -  total flux cleaned = 0.00163083 Jy
! Component: 200  -  total flux cleaned = 0.00188179 Jy
! Total flux subtracted in 200 components = 0.00188179 Jy
! Clean residual min=-0.001508 max=0.001429 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.126082 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 118 components and 0.126082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073533Jy  sigma=1.472992
! Fit after  self-cal, rms=0.073530Jy  sigma=1.472817
wmodel /J1604+1926_X_map.mod
! wmodel: Unable to open new model file: /J1604+1926_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1604+1926_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7925 x 2 at 9.229 degrees (North through East)
! Clean map  min=-0.001275  max=0.09531 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1604+1926_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0953099 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000343466 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0811 1.0811 2.16221 4.32441 8.64882 17.2976 34.5953 69.1906
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.095 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  277.494 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1604+1926_X_dfm.log closed on Thu May 19 21:52:39 2016