! Started logfile: /scr/pima/bg219g_uvs/J1539+2744_X_dfm.log on Thu May 19 21:51:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1539+2744_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1539+2744_X_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.905556 visibilities/baseline/integration-bin.
! Found source: J1539+2744
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1539+2744_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.057507Jy  sigma=21.832759
! Fit after  self-cal, rms=0.681325Jy  sigma=14.046764
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6545 mas, bmaj=1.958 mas, bpa=13.83 degrees
! Estimated noise=0.62787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.252796 Jy
! Component: 100  -  total flux cleaned = 0.307948 Jy
! Total flux subtracted in 100 components = 0.307948 Jy
! Clean residual min=-0.006422 max=0.015499 Jy/beam
! Clean residual mean=-0.000001 rms=0.001815 Jy/beam
! Combined flux in latest and established models = 0.307948 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.307948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087997Jy  sigma=1.631265
! Fit after  self-cal, rms=0.087968Jy  sigma=1.630976
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145189 Jy
! Component: 100  -  total flux cleaned = 0.0202416 Jy
! Total flux subtracted in 100 components = 0.0202416 Jy
! Clean residual min=-0.004790 max=0.007971 Jy/beam
! Clean residual mean=-0.000000 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.32819 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.32819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086054Jy  sigma=1.569546
! Fit after  self-cal, rms=0.086046Jy  sigma=1.569229
! Inverting map 
! Added new window around map position (9.8, -15.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00617429 Jy
! Component: 100  -  total flux cleaned = 0.00706317 Jy
! Total flux subtracted in 100 components = 0.00706317 Jy
! Clean residual min=-0.004168 max=0.006480 Jy/beam
! Clean residual mean=0.000000 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.335253 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.335253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085437Jy  sigma=1.556154
! Fit after  self-cal, rms=0.085392Jy  sigma=1.554442
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8413 mas, bmaj=2.12 mas, bpa=13.05 degrees
! Estimated noise=0.325727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035079 Jy
! Component: 100  -  total flux cleaned = 0.00323023 Jy
! Component: 150  -  total flux cleaned = 0.00277372 Jy
! Component: 200  -  total flux cleaned = 0.0025309 Jy
! Total flux subtracted in 200 components = 0.0025309 Jy
! Clean residual min=-0.004457 max=0.004660 Jy/beam
! Clean residual mean=0.000001 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.337784 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.337784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085129Jy  sigma=1.549152
! Fit after  self-cal, rms=0.085102Jy  sigma=1.548298
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8413 x 2.12 at 13.05 degrees (North through East)
! Clean map  min=-0.0040066  max=0.31984 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        1.02     KP        1.01     
!   LA        1.08     MK        0.95     NL        0.99     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.05     KP        1.01     
!   LA        1.02     MK        0.97     NL        1.01     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.97     KP        0.99     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.99     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        0.97     KP        1.01     
!   LA        1.02     MK        0.95     NL        1.02     OV        0.98     
!   PT        1.08     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.99     KP        0.99     
!   LA        1.05     MK        0.97     NL        1.02     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.03     KP        1.00     
!   LA        0.95     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.00     KP        1.01     
!   LA        1.01     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        1.00     
!   LA        1.01     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.01     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.01     KP        1.01     
!   LA        1.00     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.04     KP        0.91     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.95     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.085102Jy  sigma=1.548298
! Fit after  self-cal, rms=0.085401Jy  sigma=1.529122
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8382 mas, bmaj=2.121 mas, bpa=12.96 degrees
! Estimated noise=0.326271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000485522 Jy
! Component: 100  -  total flux cleaned = -0.000487103 Jy
! Component: 150  -  total flux cleaned = -0.000644189 Jy
! Component: 200  -  total flux cleaned = -0.000808444 Jy
! Total flux subtracted in 200 components = -0.000808444 Jy
! Clean residual min=-0.003023 max=0.002688 Jy/beam
! Clean residual mean=-0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.336975 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.336975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085345Jy  sigma=1.528120
! Fit after  self-cal, rms=0.085371Jy  sigma=1.527937
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085371Jy  sigma=1.527937
! Fit after  self-cal, rms=0.085443Jy  sigma=1.527750
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8374 mas, bmaj=2.121 mas, bpa=12.93 degrees
! Estimated noise=0.326296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000436573 Jy
! Component: 100  -  total flux cleaned = -0.000435323 Jy
! Component: 150  -  total flux cleaned = -0.000559743 Jy
! Component: 200  -  total flux cleaned = -0.000694339 Jy
! Total flux subtracted in 200 components = -0.000694339 Jy
! Clean residual min=-0.002679 max=0.002569 Jy/beam
! Clean residual mean=-0.000000 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.336281 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.336281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085406Jy  sigma=1.527119
! Fit after  self-cal, rms=0.085400Jy  sigma=1.527036
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00022538 Jy
! Component: 100  -  total flux cleaned = -0.000271196 Jy
! Component: 150  -  total flux cleaned = -0.000376665 Jy
! Component: 200  -  total flux cleaned = -0.000414505 Jy
! Total flux subtracted in 200 components = -0.000414505 Jy
! Clean residual min=-0.002522 max=0.002455 Jy/beam
! Clean residual mean=-0.000000 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.335867 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.335867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085385Jy  sigma=1.526781
! Fit after  self-cal, rms=0.085380Jy  sigma=1.526729
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085380Jy  sigma=1.526729
! Fit after  self-cal, rms=0.085458Jy  sigma=1.526503
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8366 mas, bmaj=2.121 mas, bpa=12.9 degrees
! Estimated noise=0.32626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00034658 Jy
! Component: 100  -  total flux cleaned = -0.000375692 Jy
! Component: 150  -  total flux cleaned = -0.000350305 Jy
! Component: 200  -  total flux cleaned = -0.000409746 Jy
! Total flux subtracted in 200 components = -0.000409746 Jy
! Clean residual min=-0.002374 max=0.002336 Jy/beam
! Clean residual mean=-0.000000 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.335457 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 61 components and 0.335457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085436Jy  sigma=1.526158
! Fit after  self-cal, rms=0.085433Jy  sigma=1.526102
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255703 Jy
! Component: 100  -  total flux cleaned = 0.00384653 Jy
! Component: 150  -  total flux cleaned = 0.00418417 Jy
! Component: 200  -  total flux cleaned = 0.00452041 Jy
! Total flux subtracted in 200 components = 0.00452041 Jy
! Clean residual min=-0.002093 max=0.002101 Jy/beam
! Clean residual mean=-0.000000 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.339977 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 0.339977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085327Jy  sigma=1.524205
! Fit after  self-cal, rms=0.085325Jy  sigma=1.524173
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085325Jy  sigma=1.524173
! Fit after  self-cal, rms=0.085268Jy  sigma=1.524071
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.914 mas, bmaj=2.825 mas, bpa=2.049 degrees
! Estimated noise=0.436916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118547 Jy
! Component: 100  -  total flux cleaned = 0.00175268 Jy
! Component: 150  -  total flux cleaned = 0.0020552 Jy
! Component: 200  -  total flux cleaned = 0.00229152 Jy
! Total flux subtracted in 200 components = 0.00229152 Jy
! Clean residual min=-0.001954 max=0.002626 Jy/beam
! Clean residual mean=0.000000 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.342269 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.342269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085251Jy  sigma=1.523867
! Fit after  self-cal, rms=0.085253Jy  sigma=1.523858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38.8, 45.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216702 Jy
! Component: 100  -  total flux cleaned = 0.00293781 Jy
! Component: 150  -  total flux cleaned = 0.00343725 Jy
! Component: 200  -  total flux cleaned = 0.00381567 Jy
! Total flux subtracted in 200 components = 0.00381567 Jy
! Clean residual min=-0.001618 max=0.001682 Jy/beam
! Clean residual mean=0.000000 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.346085 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 109 components and 0.346085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085214Jy  sigma=1.523063
! Fit after  self-cal, rms=0.085209Jy  sigma=1.522979
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.122 mas, bpa=12.91 degrees
! Estimated noise=0.325811 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8362 x 2.122 at 12.91 degrees (North through East)
! Clean map  min=-0.0030482  max=0.32206 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6509 mas, bmaj=1.958 mas, bpa=13.74 degrees
! Estimated noise=0.626074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.252002 Jy
! Component: 100  -  total flux cleaned = 0.307237 Jy
! Component: 150  -  total flux cleaned = 0.322364 Jy
! Component: 200  -  total flux cleaned = 0.329541 Jy
! Total flux subtracted in 200 components = 0.329541 Jy
! Clean residual min=-0.004005 max=0.004283 Jy/beam
! Clean residual mean=-0.000000 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.329541 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.329541 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.122 mas, bpa=12.91 degrees
! Estimated noise=0.325811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, -17.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00486124 Jy
! Component: 100  -  total flux cleaned = 0.0067663 Jy
! Component: 150  -  total flux cleaned = 0.0080633 Jy
! Component: 200  -  total flux cleaned = 0.00925111 Jy
! Total flux subtracted in 200 components = 0.00925111 Jy
! Clean residual min=-0.002166 max=0.002188 Jy/beam
! Clean residual mean=-0.000000 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.338792 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 34 components and 0.338792 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.914 mas, bmaj=2.825 mas, bpa=2.049 degrees
! Estimated noise=0.436916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241981 Jy
! Component: 100  -  total flux cleaned = 0.0042787 Jy
! Component: 150  -  total flux cleaned = 0.0057129 Jy
! Component: 200  -  total flux cleaned = 0.00677909 Jy
! Total flux subtracted in 200 components = 0.00677909 Jy
! Clean residual min=-0.002124 max=0.002000 Jy/beam
! Clean residual mean=0.000000 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.345571 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000840269 Jy
! Component: 100  -  total flux cleaned = 0.00137998 Jy
! Component: 150  -  total flux cleaned = 0.0017191 Jy
! Component: 200  -  total flux cleaned = 0.00203007 Jy
! Total flux subtracted in 200 components = 0.00203007 Jy
! Clean residual min=-0.001847 max=0.001841 Jy/beam
! Clean residual mean=0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.347601 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 77 components and 0.347601 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.122 mas, bpa=12.91 degrees
! Estimated noise=0.325811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030362 Jy
! Component: 100  -  total flux cleaned = 0.000407288 Jy
! Component: 150  -  total flux cleaned = 0.000410424 Jy
! Component: 200  -  total flux cleaned = 0.000410783 Jy
! Total flux subtracted in 200 components = 0.000410783 Jy
! Clean residual min=-0.001917 max=0.001696 Jy/beam
! Clean residual mean=0.000000 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.348012 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 102 components and 0.348011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085225Jy  sigma=1.523053
! Fit after  self-cal, rms=0.085216Jy  sigma=1.522892
wmodel /J1539+2744_X_map.mod
! wmodel: Unable to open new model file: /J1539+2744_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1539+2744_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8362 x 2.122 at 12.91 degrees (North through East)
! Clean map  min=-0.0026093  max=0.32244 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1539+2744_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.322435 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000408098 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.379702 0.379702 0.759405 1.51881 3.03762 6.07524 12.1505 24.301 48.6019 97.2038
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.322 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  790.092 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1539+2744_X_dfm.log closed on Thu May 19 21:51:57 2016