! Started logfile: /scr/pima/bg219g_uvs/J1539+2744_S_dfm.log on Thu May 19 21:51:51 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1539+2744_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1539+2744_S_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.962963 visibilities/baseline/integration-bin. ! Found source: J1539+2744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 3328 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1539+2744_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.026882Jy sigma=23.913553 ! Fit after self-cal, rms=0.774469Jy sigma=18.139309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=7.443 mas, bpa=13.46 degrees ! Estimated noise=0.754416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175761 Jy ! Component: 100 - total flux cleaned = 0.214089 Jy ! Total flux subtracted in 100 components = 0.214089 Jy ! Clean residual min=-0.005836 max=0.010689 Jy/beam ! Clean residual mean=0.000012 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.214089 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.214089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061124Jy sigma=1.383178 ! Fit after self-cal, rms=0.061120Jy sigma=1.383111 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=8.043 mas, bpa=11.57 degrees ! Estimated noise=0.540251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131044 Jy ! Component: 100 - total flux cleaned = 0.0188534 Jy ! Component: 150 - total flux cleaned = 0.0224292 Jy ! Component: 200 - total flux cleaned = 0.0248086 Jy ! Total flux subtracted in 200 components = 0.0248086 Jy ! Clean residual min=-0.008112 max=0.004960 Jy/beam ! Clean residual mean=0.000005 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.238897 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.238897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058811Jy sigma=1.310248 ! Fit after self-cal, rms=0.058808Jy sigma=1.310072 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 8.043 at 11.57 degrees (North through East) ! Clean map min=-0.0077696 max=0.22832 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.03 KP 1.02 LA 0.99 ! MK 0.99 NL 0.90 OV 1.00 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.10 KP 0.99 LA 1.00 ! MK 1.01 NL 0.91 OV 1.02 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 1.04 KP 1.02 LA 1.00 ! MK 1.02 NL 1.04 OV 1.03 PT 1.00 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.058808Jy sigma=1.310072 ! Fit after self-cal, rms=0.058000Jy sigma=1.286427 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.059 mas, bpa=11.65 degrees ! Estimated noise=0.54151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141476 Jy ! Component: 100 - total flux cleaned = 0.00217058 Jy ! Component: 150 - total flux cleaned = 0.00221788 Jy ! Component: 200 - total flux cleaned = 0.00228192 Jy ! Total flux subtracted in 200 components = 0.00228192 Jy ! Clean residual min=-0.004641 max=0.002962 Jy/beam ! Clean residual mean=-0.000001 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.241179 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.241179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057970Jy sigma=1.285261 ! Fit after self-cal, rms=0.057982Jy sigma=1.285120 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057982Jy sigma=1.285120 ! Fit after self-cal, rms=0.058109Jy sigma=1.284833 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=8.051 mas, bpa=11.7 degrees ! Estimated noise=0.543174 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109685 Jy ! Component: 100 - total flux cleaned = 0.00166832 Jy ! Component: 150 - total flux cleaned = 0.00170749 Jy ! Component: 200 - total flux cleaned = 0.00170687 Jy ! Total flux subtracted in 200 components = 0.00170687 Jy ! Clean residual min=-0.004608 max=0.002993 Jy/beam ! Clean residual mean=-0.000001 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.242886 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.242886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058093Jy sigma=1.284075 ! Fit after self-cal, rms=0.058090Jy sigma=1.284029 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115226 Jy ! Component: 100 - total flux cleaned = 9.94504e-05 Jy ! Component: 150 - total flux cleaned = 0.000115783 Jy ! Component: 200 - total flux cleaned = 0.000101218 Jy ! Total flux subtracted in 200 components = 0.000101218 Jy ! Clean residual min=-0.004610 max=0.002977 Jy/beam ! Clean residual mean=-0.000001 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.242987 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.242987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058080Jy sigma=1.283780 ! Fit after self-cal, rms=0.058078Jy sigma=1.283745 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058078Jy sigma=1.283745 ! Fit after self-cal, rms=0.058202Jy sigma=1.283558 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=8.045 mas, bpa=11.72 degrees ! Estimated noise=0.544633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843961 Jy ! Component: 100 - total flux cleaned = 0.00127428 Jy ! Component: 150 - total flux cleaned = 0.00130465 Jy ! Component: 200 - total flux cleaned = 0.00130478 Jy ! Total flux subtracted in 200 components = 0.00130478 Jy ! Clean residual min=-0.004608 max=0.003024 Jy/beam ! Clean residual mean=-0.000001 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.244292 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.244292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058194Jy sigma=1.283067 ! Fit after self-cal, rms=0.058192Jy sigma=1.283038 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.53168e-05 Jy ! Component: 100 - total flux cleaned = 9.4869e-05 Jy ! Component: 150 - total flux cleaned = 8.23599e-05 Jy ! Component: 200 - total flux cleaned = 9.48114e-05 Jy ! Total flux subtracted in 200 components = 9.48114e-05 Jy ! Clean residual min=-0.004617 max=0.003018 Jy/beam ! Clean residual mean=-0.000001 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.244387 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.244387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058186Jy sigma=1.282883 ! Fit after self-cal, rms=0.058185Jy sigma=1.282863 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058185Jy sigma=1.282863 ! Fit after self-cal, rms=0.058291Jy sigma=1.282748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.592 mas, bmaj=10.35 mas, bpa=1.087 degrees ! Estimated noise=0.689303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729232 Jy ! Component: 100 - total flux cleaned = 0.00063682 Jy ! Component: 150 - total flux cleaned = 0.000559841 Jy ! Component: 200 - total flux cleaned = 0.000509382 Jy ! Total flux subtracted in 200 components = 0.000509382 Jy ! Clean residual min=-0.004435 max=0.003188 Jy/beam ! Clean residual mean=-0.000005 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.244896 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.244896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058306Jy sigma=1.282600 ! Fit after self-cal, rms=0.058297Jy sigma=1.282451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.25661e-05 Jy ! Component: 100 - total flux cleaned = -7.13103e-05 Jy ! Component: 150 - total flux cleaned = -0.000114865 Jy ! Component: 200 - total flux cleaned = -0.000153637 Jy ! Total flux subtracted in 200 components = -0.000153637 Jy ! Clean residual min=-0.004386 max=0.003105 Jy/beam ! Clean residual mean=-0.000005 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.244743 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 67 components and 0.244743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058311Jy sigma=1.282579 ! Fit after self-cal, rms=0.058306Jy sigma=1.282493 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.04 mas, bpa=11.74 degrees ! Estimated noise=0.545814 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 8.04 at 11.74 degrees (North through East) ! Clean map min=-0.0044736 max=0.22997 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.581 mas, bmaj=7.445 mas, bpa=13.61 degrees ! Estimated noise=0.764904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.17818 Jy ! Component: 100 - total flux cleaned = 0.217117 Jy ! Component: 150 - total flux cleaned = 0.228124 Jy ! Component: 200 - total flux cleaned = 0.233259 Jy ! Total flux subtracted in 200 components = 0.233259 Jy ! Clean residual min=-0.004138 max=0.004336 Jy/beam ! Clean residual mean=0.000004 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.233259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.233259 Jy ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.04 mas, bpa=11.74 degrees ! Estimated noise=0.545814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433998 Jy ! Component: 100 - total flux cleaned = 0.00700081 Jy ! Component: 150 - total flux cleaned = 0.00883949 Jy ! Component: 200 - total flux cleaned = 0.010121 Jy ! Total flux subtracted in 200 components = 0.010121 Jy ! Clean residual min=-0.004740 max=0.002870 Jy/beam ! Clean residual mean=0.000000 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.24338 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.24338 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.592 mas, bmaj=10.35 mas, bpa=1.087 degrees ! Estimated noise=0.689303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010981 Jy ! Component: 100 - total flux cleaned = 0.0011996 Jy ! Component: 150 - total flux cleaned = 0.00121985 Jy ! Component: 200 - total flux cleaned = 0.00119029 Jy ! Total flux subtracted in 200 components = 0.00119029 Jy ! Clean residual min=-0.004490 max=0.003108 Jy/beam ! Clean residual mean=-0.000004 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.244571 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.31333e-05 Jy ! Component: 100 - total flux cleaned = -3.88674e-05 Jy ! Component: 150 - total flux cleaned = -5.07155e-05 Jy ! Component: 200 - total flux cleaned = -5.05412e-05 Jy ! Total flux subtracted in 200 components = -5.05412e-05 Jy ! Clean residual min=-0.004461 max=0.003075 Jy/beam ! Clean residual mean=-0.000004 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.24452 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.24452 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.04 mas, bpa=11.74 degrees ! Estimated noise=0.545814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.7059e-05 Jy ! Component: 100 - total flux cleaned = 6.9206e-05 Jy ! Component: 150 - total flux cleaned = 0.000126762 Jy ! Component: 200 - total flux cleaned = 0.000177032 Jy ! Total flux subtracted in 200 components = 0.000177032 Jy ! Clean residual min=-0.004758 max=0.002883 Jy/beam ! Clean residual mean=-0.000001 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.244697 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.244697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058315Jy sigma=1.282947 ! Fit after self-cal, rms=0.058315Jy sigma=1.282885 wmodel /J1539+2744_S_map.mod ! wmodel: Unable to open new model file: /J1539+2744_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1539+2744_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 8.04 at 11.74 degrees (North through East) ! Clean map min=-0.0045891 max=0.23 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1539+2744_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.23 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000981057 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27964 1.27964 2.55928 5.11855 10.2371 20.4742 40.9484 81.8968 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.23 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 234.441 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1539+2744_S_dfm.log closed on Thu May 19 21:51:53 2016