! Started logfile: /scr/pima/bg219g_uvs/J1507+0415_X_dfm.log on Thu May 19 21:50:51 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /scr/pima/bg219g_uvs/J1507+0415_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1507+0415_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.93545 visibilities/baseline/integration-bin. ! Found source: J1507+0415 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21216 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1507+0415_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008515Jy sigma=23.455065 ! Fit after self-cal, rms=0.898880Jy sigma=20.884902 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7307 mas, bmaj=1.735 mas, bpa=-3.567 degrees ! Estimated noise=0.390718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0774304 Jy ! Component: 100 - total flux cleaned = 0.0977256 Jy ! Total flux subtracted in 100 components = 0.0977256 Jy ! Clean residual min=-0.004173 max=0.008504 Jy/beam ! Clean residual mean=-0.000001 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.0977256 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0977256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071184Jy sigma=1.517037 ! Fit after self-cal, rms=0.071021Jy sigma=1.514007 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935667 Jy ! Component: 100 - total flux cleaned = 0.0142471 Jy ! Total flux subtracted in 100 components = 0.0142471 Jy ! Clean residual min=-0.002855 max=0.002853 Jy/beam ! Clean residual mean=0.000000 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.111973 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.111973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069606Jy sigma=1.477092 ! Fit after self-cal, rms=0.069597Jy sigma=1.476611 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9142 mas, bmaj=2.013 mas, bpa=-2.784 degrees ! Estimated noise=0.219125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376614 Jy ! Component: 100 - total flux cleaned = 0.00558427 Jy ! Component: 150 - total flux cleaned = 0.00661746 Jy ! Component: 200 - total flux cleaned = 0.00725409 Jy ! Total flux subtracted in 200 components = 0.00725409 Jy ! Clean residual min=-0.001806 max=0.001827 Jy/beam ! Clean residual mean=-0.000002 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.119227 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.119227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069408Jy sigma=1.471877 ! Fit after self-cal, rms=0.069412Jy sigma=1.471758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9142 x 2.013 at -2.784 degrees (North through East) ! Clean map min=-0.0017151 max=0.1025 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.04 KP 1.01 ! LA 0.96 MK 0.94 NL 1.04 OV 0.97 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.03 KP 0.99 ! LA 1.05 MK 0.99 NL 1.03 OV 0.99 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.98 KP 1.00 ! LA 0.99 MK 1.02 NL 1.01 OV 1.01 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.01 KP 1.02 ! LA 0.97 MK 1.01 NL 1.03 OV 0.96 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.96 KP 1.04 ! LA 0.98 MK 0.97 NL 1.02 OV 0.98 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 0.94 KP 1.02 ! LA 1.00 MK 1.04 NL 1.06 OV 0.97 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.96 KP 1.06 ! LA 0.92 MK 0.96 NL 1.05 OV 0.97 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.95 KP 1.04 ! LA 0.95 MK 0.98 NL 1.00 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.92 KP 1.02 ! LA 0.96 MK 1.06 NL 1.03 OV 1.01 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.95 KP 0.95 ! LA 0.90 MK 1.06 NL 1.00 OV 1.01 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.92 KP 1.03 ! LA 0.94 MK 1.05 NL 1.04 OV 0.98 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.97 KP 1.02 ! LA 0.90 MK 0.98 NL 1.00 OV 1.04 ! PT 1.00 SC 1.02 ! ! ! Fit before self-cal, rms=0.069412Jy sigma=1.471758 ! Fit after self-cal, rms=0.067942Jy sigma=1.466904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9138 mas, bmaj=2.02 mas, bpa=-2.871 degrees ! Estimated noise=0.219005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165472 Jy ! Component: 100 - total flux cleaned = 0.000167758 Jy ! Component: 150 - total flux cleaned = 0.000157965 Jy ! Component: 200 - total flux cleaned = 0.000157683 Jy ! Total flux subtracted in 200 components = 0.000157683 Jy ! Clean residual min=-0.001580 max=0.001593 Jy/beam ! Clean residual mean=0.000000 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.119384 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.119384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067936Jy sigma=1.466788 ! Fit after self-cal, rms=0.067931Jy sigma=1.466643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067931Jy sigma=1.466643 ! Fit after self-cal, rms=0.068294Jy sigma=1.463121 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.912 mas, bmaj=2.022 mas, bpa=-3.062 degrees ! Estimated noise=0.218959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141774 Jy ! Component: 100 - total flux cleaned = 0.000120703 Jy ! Component: 150 - total flux cleaned = 0.000111276 Jy ! Component: 200 - total flux cleaned = 0.000103158 Jy ! Total flux subtracted in 200 components = 0.000103158 Jy ! Clean residual min=-0.001450 max=0.001576 Jy/beam ! Clean residual mean=-0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.119488 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.119488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068290Jy sigma=1.463055 ! Fit after self-cal, rms=0.068307Jy sigma=1.462965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.2, -35.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129009 Jy ! Component: 100 - total flux cleaned = 0.00136672 Jy ! Component: 150 - total flux cleaned = 0.00144046 Jy ! Component: 200 - total flux cleaned = 0.00151946 Jy ! Total flux subtracted in 200 components = 0.00151946 Jy ! Clean residual min=-0.001455 max=0.001471 Jy/beam ! Clean residual mean=-0.000000 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.121007 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.121007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068279Jy sigma=1.462372 ! Fit after self-cal, rms=0.068277Jy sigma=1.462328 ! Inverting map ! Added new window around map position (49.4, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141567 Jy ! Component: 100 - total flux cleaned = 0.00211464 Jy ! Component: 150 - total flux cleaned = 0.00237425 Jy ! Component: 200 - total flux cleaned = 0.00255774 Jy ! Total flux subtracted in 200 components = 0.00255774 Jy ! Clean residual min=-0.001342 max=0.001503 Jy/beam ! Clean residual mean=0.000000 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.123565 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.123565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068244Jy sigma=1.461581 ! Fit after self-cal, rms=0.068243Jy sigma=1.461536 ! Inverting map ! Added new window around map position (0.4, 9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945574 Jy ! Component: 100 - total flux cleaned = 0.00111351 Jy ! Component: 150 - total flux cleaned = 0.00120935 Jy ! Component: 200 - total flux cleaned = 0.00125211 Jy ! Total flux subtracted in 200 components = 0.00125211 Jy ! Clean residual min=-0.001292 max=0.001098 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.124817 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.124817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068209Jy sigma=1.460856 ! Fit after self-cal, rms=0.068208Jy sigma=1.460824 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068208Jy sigma=1.460824 ! Fit after self-cal, rms=0.068148Jy sigma=1.460722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9108 mas, bmaj=2.023 mas, bpa=-3.172 degrees ! Estimated noise=0.218541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343114 Jy ! Component: 100 - total flux cleaned = 0.000418909 Jy ! Component: 150 - total flux cleaned = 0.000523519 Jy ! Component: 200 - total flux cleaned = 0.000555833 Jy ! Total flux subtracted in 200 components = 0.000555833 Jy ! Clean residual min=-0.001248 max=0.001058 Jy/beam ! Clean residual mean=0.000000 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.125373 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 98 components and 0.125373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068138Jy sigma=1.460528 ! Fit after self-cal, rms=0.068141Jy sigma=1.460523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.69706e-05 Jy ! Component: 100 - total flux cleaned = 0.000141766 Jy ! Component: 150 - total flux cleaned = 0.000170242 Jy ! Component: 200 - total flux cleaned = 0.000223998 Jy ! Total flux subtracted in 200 components = 0.000223998 Jy ! Clean residual min=-0.001239 max=0.001044 Jy/beam ! Clean residual mean=0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.125597 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 104 components and 0.125597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068135Jy sigma=1.460408 ! Fit after self-cal, rms=0.068135Jy sigma=1.460405 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068135Jy sigma=1.460405 ! Fit after self-cal, rms=0.068177Jy sigma=1.460398 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=3.194 mas, bpa=-4.359 degrees ! Estimated noise=0.275568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216574 Jy ! Component: 100 - total flux cleaned = -0.000262969 Jy ! Component: 150 - total flux cleaned = -0.000316751 Jy ! Component: 200 - total flux cleaned = -0.000341384 Jy ! Total flux subtracted in 200 components = -0.000341384 Jy ! Clean residual min=-0.001202 max=0.001247 Jy/beam ! Clean residual mean=0.000001 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.125255 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.125255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068176Jy sigma=1.460356 ! Fit after self-cal, rms=0.068177Jy sigma=1.460348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.05542e-05 Jy ! Component: 100 - total flux cleaned = -8.44903e-05 Jy ! Component: 150 - total flux cleaned = -9.49706e-05 Jy ! Component: 200 - total flux cleaned = -0.000104976 Jy ! Total flux subtracted in 200 components = -0.000104976 Jy ! Clean residual min=-0.001200 max=0.001248 Jy/beam ! Clean residual mean=0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.12515 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.12515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068176Jy sigma=1.460333 ! Fit after self-cal, rms=0.068176Jy sigma=1.460332 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9106 mas, bmaj=2.023 mas, bpa=-3.183 degrees ! Estimated noise=0.218645 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9106 x 2.023 at -3.183 degrees (North through East) ! Clean map min=-0.0011568 max=0.10239 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7269 mas, bmaj=1.743 mas, bpa=-4.062 degrees ! Estimated noise=0.388916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769415 Jy ! Component: 100 - total flux cleaned = 0.0980685 Jy ! Component: 150 - total flux cleaned = 0.107643 Jy ! Component: 200 - total flux cleaned = 0.112644 Jy ! Total flux subtracted in 200 components = 0.112644 Jy ! Clean residual min=-0.002572 max=0.002645 Jy/beam ! Clean residual mean=0.000000 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.112644 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.112644 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9106 mas, bmaj=2.023 mas, bpa=-3.183 degrees ! Estimated noise=0.218645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332381 Jy ! Component: 100 - total flux cleaned = 0.00534146 Jy ! Component: 150 - total flux cleaned = 0.00695658 Jy ! Component: 200 - total flux cleaned = 0.00803899 Jy ! Total flux subtracted in 200 components = 0.00803899 Jy ! Clean residual min=-0.001465 max=0.001172 Jy/beam ! Clean residual mean=-0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.120683 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.120683 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=3.194 mas, bpa=-4.359 degrees ! Estimated noise=0.275568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143095 Jy ! Component: 100 - total flux cleaned = 0.00210253 Jy ! Component: 150 - total flux cleaned = 0.00257193 Jy ! Component: 200 - total flux cleaned = 0.00298796 Jy ! Total flux subtracted in 200 components = 0.00298796 Jy ! Clean residual min=-0.001221 max=0.001222 Jy/beam ! Clean residual mean=0.000000 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.123671 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292305 Jy ! Component: 100 - total flux cleaned = 0.000509156 Jy ! Component: 150 - total flux cleaned = 0.000665882 Jy ! Component: 200 - total flux cleaned = 0.00075535 Jy ! Total flux subtracted in 200 components = 0.00075535 Jy ! Clean residual min=-0.001205 max=0.001213 Jy/beam ! Clean residual mean=0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.124427 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 66 components and 0.124427 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9106 mas, bmaj=2.023 mas, bpa=-3.183 degrees ! Estimated noise=0.218645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301873 Jy ! Component: 100 - total flux cleaned = 0.000508926 Jy ! Component: 150 - total flux cleaned = 0.00069313 Jy ! Component: 200 - total flux cleaned = 0.000881997 Jy ! Total flux subtracted in 200 components = 0.000881997 Jy ! Clean residual min=-0.001260 max=0.001040 Jy/beam ! Clean residual mean=0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.125309 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.125309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068200Jy sigma=1.460818 ! Fit after self-cal, rms=0.068197Jy sigma=1.460742 wmodel /J1507+0415_X_map.mod ! wmodel: Unable to open new model file: /J1507+0415_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1507+0415_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9106 x 2.023 at -3.183 degrees (North through East) ! Clean map min=-0.0011498 max=0.10234 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1507+0415_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.102338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000272658 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.799289 0.799289 1.59858 3.19715 6.39431 12.7886 25.5772 51.1545 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.102 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 375.333 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1507+0415_X_dfm.log closed on Thu May 19 21:50:55 2016