! Started logfile: /scr/pima/bg219g_uvs/J1505+0326_S_dfm.log on Thu May 19 21:50:33 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1505+0326_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1505+0326_S_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.898413 visibilities/baseline/integration-bin. ! Found source: J1505+0326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 1132 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1505+0326_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021059Jy sigma=17.458492 ! Fit after self-cal, rms=0.529309Jy sigma=9.441865 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.045 mas, bpa=-6.358 degrees ! Estimated noise=1.62569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.372846 Jy ! Component: 100 - total flux cleaned = 0.454366 Jy ! Total flux subtracted in 100 components = 0.454366 Jy ! Clean residual min=-0.014498 max=0.024581 Jy/beam ! Clean residual mean=0.000013 rms=0.004196 Jy/beam ! Combined flux in latest and established models = 0.454366 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.454366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102402Jy sigma=1.674098 ! Fit after self-cal, rms=0.102402Jy sigma=1.674034 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=7.706 mas, bpa=-7.164 degrees ! Estimated noise=1.38143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268103 Jy ! Component: 100 - total flux cleaned = 0.0409293 Jy ! Component: 150 - total flux cleaned = 0.0498402 Jy ! Component: 200 - total flux cleaned = 0.0554408 Jy ! Total flux subtracted in 200 components = 0.0554408 Jy ! Clean residual min=-0.009632 max=0.013723 Jy/beam ! Clean residual mean=0.000006 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 0.509807 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.509807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094897Jy sigma=1.543977 ! Fit after self-cal, rms=0.094637Jy sigma=1.538854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.276 x 7.706 at -7.164 degrees (North through East) ! Clean map min=-0.0088216 max=0.46813 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.97 KP 0.97 ! LA 0.99 MK 0.98 NL 1.00 OV 0.97 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.03 KP 0.95 ! LA 0.99 MK 0.99 NL 1.16 OV 0.99 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.05 KP 0.96 ! LA 0.98 MK 1.02 NL 1.11 OV 0.98 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.19 HN 1.05 KP 0.94 ! LA 0.94 MK 1.00 NL 0.92 OV 1.01 ! PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.094637Jy sigma=1.538854 ! Fit after self-cal, rms=0.089321Jy sigma=1.415725 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=7.714 mas, bpa=-6.934 degrees ! Estimated noise=1.37553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0045081 Jy ! Component: 100 - total flux cleaned = -0.00595581 Jy ! Component: 150 - total flux cleaned = -0.00660041 Jy ! Component: 200 - total flux cleaned = -0.00697856 Jy ! Total flux subtracted in 200 components = -0.00697856 Jy ! Clean residual min=-0.007329 max=0.006800 Jy/beam ! Clean residual mean=-0.000001 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.502829 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.502829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088967Jy sigma=1.410287 ! Fit after self-cal, rms=0.088929Jy sigma=1.409851 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088929Jy sigma=1.409851 ! Fit after self-cal, rms=0.089124Jy sigma=1.409273 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.719 mas, bpa=-6.914 degrees ! Estimated noise=1.37564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00274809 Jy ! Component: 100 - total flux cleaned = -0.00319737 Jy ! Component: 150 - total flux cleaned = -0.00344077 Jy ! Component: 200 - total flux cleaned = -0.00366349 Jy ! Total flux subtracted in 200 components = -0.00366349 Jy ! Clean residual min=-0.006915 max=0.006597 Jy/beam ! Clean residual mean=-0.000001 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.499165 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.499165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088947Jy sigma=1.406553 ! Fit after self-cal, rms=0.088935Jy sigma=1.406380 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549038 Jy ! Component: 100 - total flux cleaned = -0.000615117 Jy ! Component: 150 - total flux cleaned = -0.000677978 Jy ! Component: 200 - total flux cleaned = -0.000736583 Jy ! Total flux subtracted in 200 components = -0.000736583 Jy ! Clean residual min=-0.006529 max=0.006571 Jy/beam ! Clean residual mean=-0.000001 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.498428 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.498428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088839Jy sigma=1.405097 ! Fit after self-cal, rms=0.088833Jy sigma=1.405026 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088833Jy sigma=1.405026 ! Fit after self-cal, rms=0.088946Jy sigma=1.404399 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.721 mas, bpa=-6.893 degrees ! Estimated noise=1.37488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215442 Jy ! Component: 100 - total flux cleaned = -0.00248444 Jy ! Component: 150 - total flux cleaned = -0.00265779 Jy ! Component: 200 - total flux cleaned = -0.00281916 Jy ! Total flux subtracted in 200 components = -0.00281916 Jy ! Clean residual min=-0.006264 max=0.006430 Jy/beam ! Clean residual mean=-0.000001 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.495609 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.495609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088853Jy sigma=1.402899 ! Fit after self-cal, rms=0.088850Jy sigma=1.402795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393344 Jy ! Component: 100 - total flux cleaned = -0.000340878 Jy ! Component: 150 - total flux cleaned = -0.000389053 Jy ! Component: 200 - total flux cleaned = -0.000434116 Jy ! Total flux subtracted in 200 components = -0.000434116 Jy ! Clean residual min=-0.006141 max=0.006391 Jy/beam ! Clean residual mean=-0.000001 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.495175 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.495175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088796Jy sigma=1.402070 ! Fit after self-cal, rms=0.088795Jy sigma=1.402016 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088795Jy sigma=1.402016 ! Fit after self-cal, rms=0.088856Jy sigma=1.401613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.517 mas, bmaj=12.14 mas, bpa=10.07 degrees ! Estimated noise=1.69296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218188 Jy ! Component: 100 - total flux cleaned = -0.00255103 Jy ! Component: 150 - total flux cleaned = -0.00286151 Jy ! Component: 200 - total flux cleaned = -0.00312424 Jy ! Total flux subtracted in 200 components = -0.00312424 Jy ! Clean residual min=-0.006211 max=0.006372 Jy/beam ! Clean residual mean=-0.000003 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.492051 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.492051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088842Jy sigma=1.400715 ! Fit after self-cal, rms=0.088843Jy sigma=1.400568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000447477 Jy ! Component: 100 - total flux cleaned = -0.000575854 Jy ! Component: 150 - total flux cleaned = -0.000651567 Jy ! Component: 200 - total flux cleaned = -0.00071884 Jy ! Total flux subtracted in 200 components = -0.00071884 Jy ! Clean residual min=-0.006101 max=0.006243 Jy/beam ! Clean residual mean=-0.000003 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.491332 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 106 components and 0.491332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088839Jy sigma=1.400251 ! Fit after self-cal, rms=0.088840Jy sigma=1.400195 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.72 mas, bpa=-6.875 degrees ! Estimated noise=1.37369 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 7.72 at -6.875 degrees (North through East) ! Clean map min=-0.0059236 max=0.46743 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.07 mas, bpa=-6.152 degrees ! Estimated noise=1.60987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.369167 Jy ! Component: 100 - total flux cleaned = 0.449768 Jy ! Component: 150 - total flux cleaned = 0.472508 Jy ! Component: 200 - total flux cleaned = 0.483362 Jy ! Total flux subtracted in 200 components = 0.483362 Jy ! Clean residual min=-0.008698 max=0.007532 Jy/beam ! Clean residual mean=-0.000001 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 0.483362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.483362 Jy ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.72 mas, bpa=-6.875 degrees ! Estimated noise=1.37369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051331 Jy ! Component: 100 - total flux cleaned = 0.00602971 Jy ! Component: 150 - total flux cleaned = 0.0064777 Jy ! Component: 200 - total flux cleaned = 0.00660601 Jy ! Total flux subtracted in 200 components = 0.00660601 Jy ! Clean residual min=-0.007089 max=0.005912 Jy/beam ! Clean residual mean=-0.000001 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.489968 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.489968 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.517 mas, bmaj=12.14 mas, bpa=10.07 degrees ! Estimated noise=1.69296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650598 Jy ! Component: 100 - total flux cleaned = 0.000878372 Jy ! Component: 150 - total flux cleaned = 0.00106648 Jy ! Component: 200 - total flux cleaned = 0.00117923 Jy ! Total flux subtracted in 200 components = 0.00117923 Jy ! Clean residual min=-0.006538 max=0.006388 Jy/beam ! Clean residual mean=-0.000003 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.491147 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65533e-06 Jy ! Component: 100 - total flux cleaned = 4.97075e-05 Jy ! Component: 150 - total flux cleaned = 4.9135e-05 Jy ! Component: 200 - total flux cleaned = 8.67656e-06 Jy ! Total flux subtracted in 200 components = 8.67656e-06 Jy ! Clean residual min=-0.006384 max=0.006397 Jy/beam ! Clean residual mean=-0.000003 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.491156 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 61 components and 0.491156 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=7.72 mas, bpa=-6.875 degrees ! Estimated noise=1.37369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000934473 Jy ! Component: 100 - total flux cleaned = -0.000533065 Jy ! Component: 150 - total flux cleaned = -0.000322062 Jy ! Component: 200 - total flux cleaned = -7.0235e-05 Jy ! Total flux subtracted in 200 components = -7.0235e-05 Jy ! Clean residual min=-0.006155 max=0.006227 Jy/beam ! Clean residual mean=-0.000001 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.491086 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.491086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088931Jy sigma=1.401340 ! Fit after self-cal, rms=0.088907Jy sigma=1.401070 wmodel /J1505+0326_S_map.mod ! wmodel: Unable to open new model file: /J1505+0326_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1505+0326_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 7.72 at -6.875 degrees (North through East) ! Clean map min=-0.0060043 max=0.46919 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1505+0326_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.469188 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0015083 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.964413 0.964413 1.92883 3.85765 7.7153 15.4306 30.8612 61.7224 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.469 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 311.07 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1505+0326_S_dfm.log closed on Thu May 19 21:50:35 2016