! Started logfile: /scr/pima/bg219g_uvs/J1343+6855_S_dfm.log on Thu May 19 21:49:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219g_uvs/J1343+6855_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1343+6855_S_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798467 visibilities/baseline/integration-bin.
! Found source: J1343+6855
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4168 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1343+6855_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000556Jy  sigma=22.758885
! Fit after  self-cal, rms=0.916539Jy  sigma=20.779626
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.368 mas, bmaj=10.64 mas, bpa=-52.26 degrees
! Estimated noise=1.03662 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0598463 Jy
! Component: 100  -  total flux cleaned = 0.0863079 Jy
! Total flux subtracted in 100 components = 0.0863079 Jy
! Clean residual min=-0.009882 max=0.015098 Jy/beam
! Clean residual mean=0.000043 rms=0.002990 Jy/beam
! Combined flux in latest and established models = 0.0863079 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0863079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074130Jy  sigma=1.561797
! Fit after  self-cal, rms=0.072366Jy  sigma=1.535122
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205109 Jy
! Component: 100  -  total flux cleaned = 0.0312215 Jy
! Total flux subtracted in 100 components = 0.0312215 Jy
! Clean residual min=-0.006362 max=0.007597 Jy/beam
! Clean residual mean=0.000016 rms=0.001627 Jy/beam
! Combined flux in latest and established models = 0.117529 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.117529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065323Jy  sigma=1.346092
! Fit after  self-cal, rms=0.064851Jy  sigma=1.337772
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=10.75 mas, bpa=-53.3 degrees
! Estimated noise=0.561418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00995412 Jy
! Component: 100  -  total flux cleaned = 0.0144573 Jy
! Component: 150  -  total flux cleaned = 0.0170565 Jy
! Component: 200  -  total flux cleaned = 0.0186578 Jy
! Total flux subtracted in 200 components = 0.0186578 Jy
! Clean residual min=-0.003251 max=0.002946 Jy/beam
! Clean residual mean=0.000003 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.136187 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.136187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063505Jy  sigma=1.301128
! Fit after  self-cal, rms=0.063430Jy  sigma=1.299979
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.198 x 10.75 at -53.3 degrees (North through East)
! Clean map  min=-0.0031648  max=0.08536 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        0.97     KP        1.00     
!   LA        0.95     MK        0.94     NL        0.92     OV        1.00     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        1.13     KP        0.94     
!   LA        0.98     MK        1.10     NL        1.04     OV        1.01     
!   PT        1.02     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        1.02     KP        1.00     
!   LA        1.00     MK        1.03     NL        0.91     OV        1.01     
!   PT        0.98     SC        0.86     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.16     KP        1.05     
!   LA        1.04     MK        0.95     NL        1.04     OV        0.97     
!   PT        1.10     SC        1.15     
! 
! 
! Fit before self-cal, rms=0.063430Jy  sigma=1.299979
! Fit after  self-cal, rms=0.062157Jy  sigma=1.288386
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.202 mas, bmaj=10.86 mas, bpa=-53.05 degrees
! Estimated noise=0.557647 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935356 Jy
! Component: 100  -  total flux cleaned = 0.00102597 Jy
! Component: 150  -  total flux cleaned = 0.000884828 Jy
! Component: 200  -  total flux cleaned = 0.000826266 Jy
! Total flux subtracted in 200 components = 0.000826266 Jy
! Clean residual min=-0.002816 max=0.002480 Jy/beam
! Clean residual mean=0.000008 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.137014 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.137014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062108Jy  sigma=1.287156
! Fit after  self-cal, rms=0.062108Jy  sigma=1.286748
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062108Jy  sigma=1.286748
! Fit after  self-cal, rms=0.062011Jy  sigma=1.286678
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.199 mas, bmaj=10.87 mas, bpa=-53.05 degrees
! Estimated noise=0.557137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000492829 Jy
! Component: 100  -  total flux cleaned = 0.000408637 Jy
! Component: 150  -  total flux cleaned = 0.000361396 Jy
! Component: 200  -  total flux cleaned = 0.000294831 Jy
! Total flux subtracted in 200 components = 0.000294831 Jy
! Clean residual min=-0.002769 max=0.002421 Jy/beam
! Clean residual mean=0.000008 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.137308 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.137308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061988Jy  sigma=1.286103
! Fit after  self-cal, rms=0.061986Jy  sigma=1.286031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.75431e-05 Jy
! Component: 100  -  total flux cleaned = 3.52046e-05 Jy
! Component: 150  -  total flux cleaned = -2.01868e-05 Jy
! Component: 200  -  total flux cleaned = -6.90708e-05 Jy
! Total flux subtracted in 200 components = -6.90708e-05 Jy
! Clean residual min=-0.002716 max=0.002412 Jy/beam
! Clean residual mean=0.000008 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.137239 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.137239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061975Jy  sigma=1.285756
! Fit after  self-cal, rms=0.061974Jy  sigma=1.285724
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061974Jy  sigma=1.285724
! Fit after  self-cal, rms=0.061802Jy  sigma=1.285676
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=10.88 mas, bpa=-53.06 degrees
! Estimated noise=0.556221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012134 Jy
! Component: 100  -  total flux cleaned = 5.38982e-05 Jy
! Component: 150  -  total flux cleaned = -4.01655e-06 Jy
! Component: 200  -  total flux cleaned = -4.31786e-05 Jy
! Total flux subtracted in 200 components = -4.31786e-05 Jy
! Clean residual min=-0.002679 max=0.002354 Jy/beam
! Clean residual mean=0.000007 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.137196 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.137196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061794Jy  sigma=1.285491
! Fit after  self-cal, rms=0.061793Jy  sigma=1.285471
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.45023e-05 Jy
! Component: 100  -  total flux cleaned = -1.16041e-05 Jy
! Component: 150  -  total flux cleaned = -5.71022e-05 Jy
! Component: 200  -  total flux cleaned = -9.89933e-05 Jy
! Total flux subtracted in 200 components = -9.89933e-05 Jy
! Clean residual min=-0.002655 max=0.002354 Jy/beam
! Clean residual mean=0.000007 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.137097 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.137097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061788Jy  sigma=1.285372
! Fit after  self-cal, rms=0.061789Jy  sigma=1.285363
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061789Jy  sigma=1.285363
! Fit after  self-cal, rms=0.061656Jy  sigma=1.285341
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.089 mas, bmaj=11.66 mas, bpa=-60.72 degrees
! Estimated noise=0.67795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251472 Jy
! Component: 100  -  total flux cleaned = -0.000311725 Jy
! Component: 150  -  total flux cleaned = -0.000321889 Jy
! Component: 200  -  total flux cleaned = -0.000321879 Jy
! Total flux subtracted in 200 components = -0.000321879 Jy
! Clean residual min=-0.002903 max=0.002461 Jy/beam
! Clean residual mean=0.000015 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.136775 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 85 components and 0.136775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061654Jy  sigma=1.285319
! Fit after  self-cal, rms=0.061651Jy  sigma=1.285301
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.28541e-05 Jy
! Component: 100  -  total flux cleaned = -5.30905e-05 Jy
! Component: 150  -  total flux cleaned = -6.71256e-05 Jy
! Component: 200  -  total flux cleaned = -8.03695e-05 Jy
! Total flux subtracted in 200 components = -8.03695e-05 Jy
! Clean residual min=-0.002865 max=0.002450 Jy/beam
! Clean residual mean=0.000015 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.136695 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 0.136695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061651Jy  sigma=1.285316
! Fit after  self-cal, rms=0.061651Jy  sigma=1.285310
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.19 mas, bmaj=10.88 mas, bpa=-53.06 degrees
! Estimated noise=0.555469 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.19 x 10.88 at -53.06 degrees (North through East)
! Clean map  min=-0.0025617  max=0.084447 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.358 mas, bmaj=10.8 mas, bpa=-51.96 degrees
! Estimated noise=1.03722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0629437 Jy
! Component: 100  -  total flux cleaned = 0.0934299 Jy
! Component: 150  -  total flux cleaned = 0.10928 Jy
! Component: 200  -  total flux cleaned = 0.118747 Jy
! Total flux subtracted in 200 components = 0.118747 Jy
! Clean residual min=-0.005603 max=0.006213 Jy/beam
! Clean residual mean=0.000018 rms=0.001513 Jy/beam
! Combined flux in latest and established models = 0.118747 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.118747 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.19 mas, bmaj=10.88 mas, bpa=-53.06 degrees
! Estimated noise=0.555469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38.5, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00794766 Jy
! Component: 100  -  total flux cleaned = 0.0119787 Jy
! Component: 150  -  total flux cleaned = 0.0144107 Jy
! Component: 200  -  total flux cleaned = 0.0154069 Jy
! Total flux subtracted in 200 components = 0.0154069 Jy
! Clean residual min=-0.002818 max=0.002594 Jy/beam
! Clean residual mean=0.000013 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.134154 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 55 components and 0.134154 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.089 mas, bmaj=11.66 mas, bpa=-60.72 degrees
! Estimated noise=0.67795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123313 Jy
! Component: 100  -  total flux cleaned = 0.00154639 Jy
! Component: 150  -  total flux cleaned = 0.00178559 Jy
! Component: 200  -  total flux cleaned = 0.00194385 Jy
! Total flux subtracted in 200 components = 0.00194385 Jy
! Clean residual min=-0.002701 max=0.002113 Jy/beam
! Clean residual mean=0.000016 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.136098 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206385 Jy
! Component: 100  -  total flux cleaned = 0.000353257 Jy
! Component: 150  -  total flux cleaned = 0.00047615 Jy
! Component: 200  -  total flux cleaned = 0.000564773 Jy
! Total flux subtracted in 200 components = 0.000564773 Jy
! Clean residual min=-0.002467 max=0.002140 Jy/beam
! Clean residual mean=0.000012 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.136662 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 108 components and 0.136662 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.19 mas, bmaj=10.88 mas, bpa=-53.06 degrees
! Estimated noise=0.555469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270813 Jy
! Component: 100  -  total flux cleaned = 0.000206214 Jy
! Component: 150  -  total flux cleaned = 0.000115865 Jy
! Component: 200  -  total flux cleaned = 6.49744e-05 Jy
! Total flux subtracted in 200 components = 6.49744e-05 Jy
! Clean residual min=-0.002276 max=0.002377 Jy/beam
! Clean residual mean=0.000005 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.136727 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 127 components and 0.136727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061638Jy  sigma=1.285273
! Fit after  self-cal, rms=0.061636Jy  sigma=1.285054
wmodel /J1343+6855_S_map.mod
! wmodel: Unable to open new model file: /J1343+6855_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1343+6855_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.19 x 10.88 at -53.06 degrees (North through East)
! Clean map  min=-0.0022243  max=0.082805 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1343+6855_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0828052 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000611516 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.2155 2.2155 4.431 8.862 17.724 35.448 70.896
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.082 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  135.409 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1343+6855_S_dfm.log closed on Thu May 19 21:49:10 2016