! Started logfile: /scr/pima/bg219g_uvs/J1340+6923_X_dfm.log on Thu May 19 21:48:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1340+6923_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1340+6923_X_uva.fits
! AN table 1: 31 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.962007 visibilities/baseline/integration-bin.
! Found source: J1340+6923
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16104 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1340+6923_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004833Jy  sigma=24.426974
! Fit after  self-cal, rms=0.905525Jy  sigma=21.988593
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5801 mas, bmaj=2.775 mas, bpa=-52 degrees
! Estimated noise=0.657268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0665245 Jy
! Component: 100  -  total flux cleaned = 0.0872914 Jy
! Total flux subtracted in 100 components = 0.0872914 Jy
! Clean residual min=-0.006491 max=0.009512 Jy/beam
! Clean residual mean=-0.000021 rms=0.001578 Jy/beam
! Combined flux in latest and established models = 0.0872915 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0872915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068051Jy  sigma=1.562369
! Fit after  self-cal, rms=0.067792Jy  sigma=1.554858
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116715 Jy
! Component: 100  -  total flux cleaned = 0.0177373 Jy
! Total flux subtracted in 100 components = 0.0177373 Jy
! Clean residual min=-0.004883 max=0.004904 Jy/beam
! Clean residual mean=-0.000008 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.105029 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 9 components and 0.105029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065105Jy  sigma=1.486694
! Fit after  self-cal, rms=0.065069Jy  sigma=1.485500
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8072 mas, bmaj=2.847 mas, bpa=-53.33 degrees
! Estimated noise=0.24719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00530244 Jy
! Component: 100  -  total flux cleaned = 0.00849375 Jy
! Component: 150  -  total flux cleaned = 0.0106324 Jy
! Component: 200  -  total flux cleaned = 0.0121975 Jy
! Total flux subtracted in 200 components = 0.0121975 Jy
! Clean residual min=-0.002334 max=0.003485 Jy/beam
! Clean residual mean=-0.000012 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.117226 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 29 components and 0.117226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064581Jy  sigma=1.473660
! Fit after  self-cal, rms=0.064568Jy  sigma=1.473328
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8072 x 2.847 at -53.33 degrees (North through East)
! Clean map  min=-0.0023071  max=0.094478 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.01     
!   LA        0.97     MK        0.95     NL        1.05     OV        1.04     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.99     KP        1.03     
!   LA        0.95     MK        1.02     NL        1.02     OV        1.01     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.98     KP        0.99     
!   LA        0.89     MK        1.10     NL        1.07     OV        0.98     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.03     OV        1.03     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.96     KP        1.02     
!   LA        0.93     MK        1.00     NL        1.04     OV        1.01     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.04     OV        0.94     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        1.00     
!   LA        0.94     MK        1.02     NL        1.05     OV        0.98     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.99     KP        1.05     
!   LA        0.87     MK        0.96     NL        1.07     OV        0.97     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.00     
!   LA        0.95     MK        0.99     NL        1.08     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.95     KP        1.01     
!   LA        0.93     MK        1.03     NL        1.05     OV        0.95     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.98     KP        1.09     
!   LA        0.85     MK        0.95     NL        1.06     OV        0.97     
!   PT        0.98     SC        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.04     
!   LA        0.89     MK        1.01     NL        1.01     OV        1.02     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.064568Jy  sigma=1.473328
! Fit after  self-cal, rms=0.062380Jy  sigma=1.466368
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8084 mas, bmaj=2.847 mas, bpa=-53.36 degrees
! Estimated noise=0.245017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282976 Jy
! Component: 100  -  total flux cleaned = 0.00424665 Jy
! Component: 150  -  total flux cleaned = 0.00502679 Jy
! Component: 200  -  total flux cleaned = 0.00556102 Jy
! Total flux subtracted in 200 components = 0.00556102 Jy
! Clean residual min=-0.001622 max=0.001628 Jy/beam
! Clean residual mean=0.000006 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.122787 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 54 components and 0.122787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062257Jy  sigma=1.462942
! Fit after  self-cal, rms=0.062268Jy  sigma=1.462601
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062268Jy  sigma=1.462601
! Fit after  self-cal, rms=0.062021Jy  sigma=1.462522
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8082 mas, bmaj=2.847 mas, bpa=-53.39 degrees
! Estimated noise=0.244087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000738887 Jy
! Component: 100  -  total flux cleaned = 0.00104393 Jy
! Component: 150  -  total flux cleaned = 0.00130942 Jy
! Component: 200  -  total flux cleaned = 0.00152375 Jy
! Total flux subtracted in 200 components = 0.00152375 Jy
! Clean residual min=-0.001504 max=0.001639 Jy/beam
! Clean residual mean=0.000007 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.124311 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 75 components and 0.124311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062001Jy  sigma=1.462000
! Fit after  self-cal, rms=0.062002Jy  sigma=1.461983
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255032 Jy
! Component: 100  -  total flux cleaned = 0.00043908 Jy
! Component: 150  -  total flux cleaned = 0.000557229 Jy
! Component: 200  -  total flux cleaned = 0.000635846 Jy
! Total flux subtracted in 200 components = 0.000635846 Jy
! Clean residual min=-0.001448 max=0.001660 Jy/beam
! Clean residual mean=0.000008 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.124947 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 91 components and 0.124947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061994Jy  sigma=1.461761
! Fit after  self-cal, rms=0.061995Jy  sigma=1.461756
! Inverting map 
! Added new window around map position (-33.6, -11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148458 Jy
! Component: 100  -  total flux cleaned = 0.00213805 Jy
! Component: 150  -  total flux cleaned = 0.0025627 Jy
! Component: 200  -  total flux cleaned = 0.0028968 Jy
! Total flux subtracted in 200 components = 0.0028968 Jy
! Clean residual min=-0.001292 max=0.001390 Jy/beam
! Clean residual mean=0.000004 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.127844 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 124 components and 0.127844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061948Jy  sigma=1.460755
! Fit after  self-cal, rms=0.061945Jy  sigma=1.460687
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061945Jy  sigma=1.460687
! Fit after  self-cal, rms=0.061744Jy  sigma=1.460602
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8063 mas, bmaj=2.847 mas, bpa=-53.39 degrees
! Estimated noise=0.24368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055841 Jy
! Component: 100  -  total flux cleaned = 0.000942908 Jy
! Component: 150  -  total flux cleaned = 0.00132902 Jy
! Component: 200  -  total flux cleaned = 0.00168209 Jy
! Total flux subtracted in 200 components = 0.00168209 Jy
! Clean residual min=-0.001240 max=0.001371 Jy/beam
! Clean residual mean=0.000004 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.129526 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 134 components and 0.129526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061729Jy  sigma=1.460267
! Fit after  self-cal, rms=0.061728Jy  sigma=1.460253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 26.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000912597 Jy
! Component: 100  -  total flux cleaned = 0.00105213 Jy
! Component: 150  -  total flux cleaned = 0.00116084 Jy
! Component: 200  -  total flux cleaned = 0.00132875 Jy
! Total flux subtracted in 200 components = 0.00132875 Jy
! Clean residual min=-0.001193 max=0.001238 Jy/beam
! Clean residual mean=0.000004 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.130854 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 152 components and 0.130854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061690Jy  sigma=1.459387
! Fit after  self-cal, rms=0.061689Jy  sigma=1.459349
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061689Jy  sigma=1.459349
! Fit after  self-cal, rms=0.061630Jy  sigma=1.459300
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.054 mas, bmaj=3.238 mas, bpa=-61.33 degrees
! Estimated noise=0.314384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457216 Jy
! Component: 100  -  total flux cleaned = 0.00068875 Jy
! Component: 150  -  total flux cleaned = 0.000896454 Jy
! Component: 200  -  total flux cleaned = 0.00106971 Jy
! Total flux subtracted in 200 components = 0.00106971 Jy
! Clean residual min=-0.001213 max=0.001374 Jy/beam
! Clean residual mean=0.000009 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.131924 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 183 components and 0.131924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061623Jy  sigma=1.459111
! Fit after  self-cal, rms=0.061623Jy  sigma=1.459104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225229 Jy
! Component: 100  -  total flux cleaned = 0.000365767 Jy
! Component: 150  -  total flux cleaned = 0.000526832 Jy
! Component: 200  -  total flux cleaned = 0.000650945 Jy
! Total flux subtracted in 200 components = 0.000650945 Jy
! Clean residual min=-0.001136 max=0.001353 Jy/beam
! Clean residual mean=0.000009 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.132575 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 202 components and 0.132575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061619Jy  sigma=1.459014
! Fit after  self-cal, rms=0.061620Jy  sigma=1.459009
! Inverting map 
! Added new window around map position (36, 42.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116858 Jy
! Component: 100  -  total flux cleaned = 0.00152167 Jy
! Component: 150  -  total flux cleaned = 0.00182489 Jy
! Component: 200  -  total flux cleaned = 0.00210284 Jy
! Total flux subtracted in 200 components = 0.00210284 Jy
! Clean residual min=-0.000944 max=0.001036 Jy/beam
! Clean residual mean=0.000005 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.134678 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 226 components and 0.134678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061603Jy  sigma=1.458614
! Fit after  self-cal, rms=0.061600Jy  sigma=1.458570
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=2.847 mas, bpa=-53.39 degrees
! Estimated noise=0.243521 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8056 x 2.847 at -53.39 degrees (North through East)
! Clean map  min=-0.00093834  max=0.093886 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.579 mas, bmaj=2.77 mas, bpa=-52.05 degrees
! Estimated noise=0.649523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0658189 Jy
! Component: 100  -  total flux cleaned = 0.087402 Jy
! Component: 150  -  total flux cleaned = 0.0983793 Jy
! Component: 200  -  total flux cleaned = 0.103109 Jy
! Total flux subtracted in 200 components = 0.103109 Jy
! Clean residual min=-0.004559 max=0.004608 Jy/beam
! Clean residual mean=-0.000006 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.103109 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.103109 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=2.847 mas, bpa=-53.39 degrees
! Estimated noise=0.243521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.005995 Jy
! Component: 100  -  total flux cleaned = 0.0093324 Jy
! Component: 150  -  total flux cleaned = 0.0119792 Jy
! Component: 200  -  total flux cleaned = 0.0141727 Jy
! Total flux subtracted in 200 components = 0.0141727 Jy
! Clean residual min=-0.001941 max=0.001930 Jy/beam
! Clean residual mean=-0.000003 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.117282 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.117282 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.054 mas, bmaj=3.238 mas, bpa=-61.33 degrees
! Estimated noise=0.314384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00318477 Jy
! Component: 100  -  total flux cleaned = 0.00537774 Jy
! Component: 150  -  total flux cleaned = 0.00693976 Jy
! Component: 200  -  total flux cleaned = 0.0082022 Jy
! Total flux subtracted in 200 components = 0.0082022 Jy
! Clean residual min=-0.001801 max=0.001678 Jy/beam
! Clean residual mean=0.000005 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.125484 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114295 Jy
! Component: 100  -  total flux cleaned = 0.00210405 Jy
! Component: 150  -  total flux cleaned = 0.00300122 Jy
! Component: 200  -  total flux cleaned = 0.00373201 Jy
! Total flux subtracted in 200 components = 0.00373201 Jy
! Clean residual min=-0.001442 max=0.001384 Jy/beam
! Clean residual mean=0.000006 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.129216 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 117 components and 0.129216 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=2.847 mas, bpa=-53.39 degrees
! Estimated noise=0.243521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106248 Jy
! Component: 100  -  total flux cleaned = 0.00165123 Jy
! Component: 150  -  total flux cleaned = 0.00214551 Jy
! Component: 200  -  total flux cleaned = 0.00250161 Jy
! Total flux subtracted in 200 components = 0.00250161 Jy
! Clean residual min=-0.001263 max=0.001345 Jy/beam
! Clean residual mean=0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.131718 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 145 components and 0.131718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061637Jy  sigma=1.459530
! Fit after  self-cal, rms=0.061634Jy  sigma=1.459437
wmodel /J1340+6923_X_map.mod
! wmodel: Unable to open new model file: /J1340+6923_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1340+6923_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8056 x 2.847 at -53.39 degrees (North through East)
! Clean map  min=-0.0011539  max=0.093679 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1340+6923_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0936795 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000291888 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.934746 0.934746 1.86949 3.73899 7.47797 14.9559 29.9119 59.8238
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.093 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  320.942 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1340+6923_X_dfm.log closed on Thu May 19 21:48:58 2016