! Started logfile: /scr/pima/bg219g_uvs/J1340+6923_S_dfm.log on Thu May 19 21:48:52 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219g_uvs/J1340+6923_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1340+6923_S_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.884588 visibilities/baseline/integration-bin. ! Found source: J1340+6923 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4936 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1340+6923_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.107775Jy sigma=20.769005 ! Fit after self-cal, rms=0.877905Jy sigma=17.810452 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=10.94 mas, bpa=-52.17 degrees ! Estimated noise=0.903791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109083 Jy ! Component: 100 - total flux cleaned = 0.150205 Jy ! Total flux subtracted in 100 components = 0.150205 Jy ! Clean residual min=-0.020504 max=0.023141 Jy/beam ! Clean residual mean=0.000092 rms=0.006172 Jy/beam ! Combined flux in latest and established models = 0.150205 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.150205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.459200Jy sigma=2.312778 ! Fit after self-cal, rms=0.459014Jy sigma=2.303777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390166 Jy ! Component: 100 - total flux cleaned = 0.0617019 Jy ! Component: 150 - total flux cleaned = 0.0778186 Jy ! Component: 200 - total flux cleaned = 0.0898746 Jy ! Total flux subtracted in 200 components = 0.0898746 Jy ! Clean residual min=-0.038880 max=0.017296 Jy/beam ! Clean residual mean=-0.000091 rms=0.006509 Jy/beam ! Combined flux in latest and established models = 0.24008 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 44 components and 0.24008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443988Jy sigma=2.232647 ! Fit after self-cal, rms=0.443690Jy sigma=2.226344 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 10.91 at -52.55 degrees (North through East) ! Clean map min=-0.037524 max=0.14759 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.443690Jy sigma=2.226344 ! Fit after self-cal, rms=0.443690Jy sigma=2.226344 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108259 Jy ! Component: 100 - total flux cleaned = 0.0180077 Jy ! Component: 150 - total flux cleaned = 0.021734 Jy ! Component: 200 - total flux cleaned = 0.0250653 Jy ! Total flux subtracted in 200 components = 0.0250653 Jy ! Clean residual min=-0.042075 max=0.016698 Jy/beam ! Clean residual mean=-0.000135 rms=0.006702 Jy/beam ! Combined flux in latest and established models = 0.265145 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 63 components and 0.265145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440829Jy sigma=2.248920 ! Fit after self-cal, rms=0.440727Jy sigma=2.247530 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440727Jy sigma=2.247530 ! Fit after self-cal, rms=0.440727Jy sigma=2.247530 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003396 Jy ! Component: 100 - total flux cleaned = 0.00521506 Jy ! Component: 150 - total flux cleaned = 0.00586357 Jy ! Component: 200 - total flux cleaned = 0.00671624 Jy ! Total flux subtracted in 200 components = 0.00671624 Jy ! Clean residual min=-0.042650 max=0.016301 Jy/beam ! Clean residual mean=-0.000146 rms=0.006780 Jy/beam ! Combined flux in latest and established models = 0.271862 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.271862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439812Jy sigma=2.256524 ! Fit after self-cal, rms=0.439767Jy sigma=2.256100 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012387 Jy ! Component: 100 - total flux cleaned = 0.00158065 Jy ! Component: 150 - total flux cleaned = 0.00190254 Jy ! Component: 200 - total flux cleaned = 0.00231197 Jy ! Total flux subtracted in 200 components = 0.00231197 Jy ! Clean residual min=-0.042424 max=0.016073 Jy/beam ! Clean residual mean=-0.000150 rms=0.006796 Jy/beam ! Combined flux in latest and established models = 0.274174 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.274174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439397Jy sigma=2.258269 ! Fit after self-cal, rms=0.439384Jy sigma=2.258128 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439384Jy sigma=2.258128 ! Fit after self-cal, rms=0.439384Jy sigma=2.258128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548538 Jy ! Component: 100 - total flux cleaned = 0.000743631 Jy ! Component: 150 - total flux cleaned = 0.00102501 Jy ! Component: 200 - total flux cleaned = 0.00129662 Jy ! Total flux subtracted in 200 components = 0.00129662 Jy ! Clean residual min=-0.042341 max=0.016008 Jy/beam ! Clean residual mean=-0.000152 rms=0.006807 Jy/beam ! Combined flux in latest and established models = 0.27547 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.27547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439117Jy sigma=2.259568 ! Fit after self-cal, rms=0.439117Jy sigma=2.259459 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179008 Jy ! Component: 100 - total flux cleaned = 0.000358488 Jy ! Component: 150 - total flux cleaned = 0.000616768 Jy ! Component: 200 - total flux cleaned = 0.000868394 Jy ! Total flux subtracted in 200 components = 0.000868394 Jy ! Clean residual min=-0.042334 max=0.016010 Jy/beam ! Clean residual mean=-0.000154 rms=0.006814 Jy/beam ! Combined flux in latest and established models = 0.276339 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.276339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438903Jy sigma=2.260442 ! Fit after self-cal, rms=0.438907Jy sigma=2.260344 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438907Jy sigma=2.260344 ! Fit after self-cal, rms=0.438907Jy sigma=2.260344 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.904 mas, bmaj=11.74 mas, bpa=-60.17 degrees ! Estimated noise=0.767446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355516 Jy ! Component: 100 - total flux cleaned = 0.00442808 Jy ! Component: 150 - total flux cleaned = 0.00443152 Jy ! Component: 200 - total flux cleaned = 0.00432192 Jy ! Total flux subtracted in 200 components = 0.00432192 Jy ! Clean residual min=-0.072943 max=0.025022 Jy/beam ! Clean residual mean=-0.000372 rms=0.013604 Jy/beam ! Combined flux in latest and established models = 0.280661 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 92 components and 0.280661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438596Jy sigma=2.265971 ! Fit after self-cal, rms=0.438555Jy sigma=2.265846 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136673 Jy ! Component: 100 - total flux cleaned = 3.88059e-05 Jy ! Component: 150 - total flux cleaned = -5.14705e-05 Jy ! Component: 200 - total flux cleaned = -4.86908e-05 Jy ! Total flux subtracted in 200 components = -4.86908e-05 Jy ! Clean residual min=-0.072618 max=0.024896 Jy/beam ! Clean residual mean=-0.000372 rms=0.013621 Jy/beam ! Combined flux in latest and established models = 0.280612 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.280612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438494Jy sigma=2.266763 ! Fit after self-cal, rms=0.438473Jy sigma=2.266706 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 10.91 at -52.55 degrees (North through East) ! Clean map min=-0.040822 max=0.14456 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=10.94 mas, bpa=-52.17 degrees ! Estimated noise=0.903791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109089 Jy ! Component: 100 - total flux cleaned = 0.154677 Jy ! Component: 150 - total flux cleaned = 0.184954 Jy ! Component: 200 - total flux cleaned = 0.205985 Jy ! Total flux subtracted in 200 components = 0.205985 Jy ! Clean residual min=-0.026361 max=0.016439 Jy/beam ! Clean residual mean=0.000055 rms=0.005676 Jy/beam ! Combined flux in latest and established models = 0.205985 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.205985 Jy ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189834 Jy ! Component: 100 - total flux cleaned = 0.0321526 Jy ! Component: 150 - total flux cleaned = 0.0420422 Jy ! Component: 200 - total flux cleaned = 0.0474375 Jy ! Total flux subtracted in 200 components = 0.0474375 Jy ! Clean residual min=-0.039993 max=0.014841 Jy/beam ! Clean residual mean=-0.000114 rms=0.006588 Jy/beam ! Combined flux in latest and established models = 0.253422 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 61 components and 0.253422 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.904 mas, bmaj=11.74 mas, bpa=-60.17 degrees ! Estimated noise=0.767446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134893 Jy ! Component: 100 - total flux cleaned = 0.0175151 Jy ! Component: 150 - total flux cleaned = 0.0199804 Jy ! Component: 200 - total flux cleaned = 0.0219077 Jy ! Total flux subtracted in 200 components = 0.0219077 Jy ! Clean residual min=-0.072250 max=0.025218 Jy/beam ! Clean residual mean=-0.000353 rms=0.013493 Jy/beam ! Combined flux in latest and established models = 0.27533 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154439 Jy ! Component: 100 - total flux cleaned = 0.00231897 Jy ! Component: 150 - total flux cleaned = 0.0025555 Jy ! Component: 200 - total flux cleaned = 0.00277743 Jy ! Total flux subtracted in 200 components = 0.00277743 Jy ! Clean residual min=-0.072502 max=0.025032 Jy/beam ! Clean residual mean=-0.000365 rms=0.013583 Jy/beam ! Combined flux in latest and established models = 0.278107 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 97 components and 0.278107 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=10.91 mas, bpa=-52.55 degrees ! Estimated noise=0.57087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220942 Jy ! Component: 100 - total flux cleaned = -0.00237751 Jy ! Component: 150 - total flux cleaned = -0.00237492 Jy ! Component: 200 - total flux cleaned = -0.00237569 Jy ! Total flux subtracted in 200 components = -0.00237569 Jy ! Clean residual min=-0.042945 max=0.016101 Jy/beam ! Clean residual mean=-0.000154 rms=0.006852 Jy/beam ! Combined flux in latest and established models = 0.275732 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.275732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439030Jy sigma=2.267011 ! Fit after self-cal, rms=0.439047Jy sigma=2.266354 wmodel /J1340+6923_S_map.mod ! wmodel: Unable to open new model file: /J1340+6923_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219g_uvs/J1340+6923_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 10.91 at -52.55 degrees (North through East) ! Clean map min=-0.042144 max=0.14387 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1340+6923_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.143867 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00685016 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -14.2844 14.2844 28.5688 57.1375 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0205 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.143 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 21.001 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1340+6923_S_dfm.log closed on Thu May 19 21:48:54 2016