! Started logfile: /scr/pima/bg219g_uvs/J1339+6328_X_dfm.log on Thu May 19 21:48:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1339+6328_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1339+6328_X_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.81164 visibilities/baseline/integration-bin.
! Found source: J1339+6328
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 9204 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1339+6328_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007013Jy  sigma=24.047921
! Fit after  self-cal, rms=0.899125Jy  sigma=21.465305
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6108 mas, bmaj=2.738 mas, bpa=-51.07 degrees
! Estimated noise=0.67596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.065857 Jy
! Component: 100  -  total flux cleaned = 0.0977798 Jy
! Total flux subtracted in 100 components = 0.0977798 Jy
! Clean residual min=-0.008882 max=0.016978 Jy/beam
! Clean residual mean=-0.000067 rms=0.002595 Jy/beam
! Combined flux in latest and established models = 0.0977799 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0977799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078739Jy  sigma=1.788967
! Fit after  self-cal, rms=0.078096Jy  sigma=1.770123
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210385 Jy
! Component: 100  -  total flux cleaned = 0.0333592 Jy
! Total flux subtracted in 100 components = 0.0333592 Jy
! Clean residual min=-0.005914 max=0.008163 Jy/beam
! Clean residual mean=-0.000040 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 0.131139 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.131139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069000Jy  sigma=1.539972
! Fit after  self-cal, rms=0.068786Jy  sigma=1.534778
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110275 Jy
! Component: 100  -  total flux cleaned = 0.0178786 Jy
! Total flux subtracted in 100 components = 0.0178786 Jy
! Clean residual min=-0.004908 max=0.006396 Jy/beam
! Clean residual mean=-0.000026 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 0.149018 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 25 components and 0.149018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066212Jy  sigma=1.471279
! Fit after  self-cal, rms=0.066100Jy  sigma=1.468816
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8369 mas, bmaj=2.794 mas, bpa=-51.78 degrees
! Estimated noise=0.327363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00928682 Jy
! Component: 100  -  total flux cleaned = 0.0151842 Jy
! Component: 150  -  total flux cleaned = 0.0194808 Jy
! Component: 200  -  total flux cleaned = 0.022592 Jy
! Total flux subtracted in 200 components = 0.022592 Jy
! Clean residual min=-0.002843 max=0.003958 Jy/beam
! Clean residual mean=-0.000040 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.17161 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 41 components and 0.17161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064486Jy  sigma=1.431022
! Fit after  self-cal, rms=0.064330Jy  sigma=1.428031
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8369 x 2.794 at -51.78 degrees (North through East)
! Clean map  min=-0.002662  max=0.093827 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.96     KP        1.00     
!   LA        0.93     MK        1.08     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.92     KP        0.98     
!   LA        0.98     MK        1.07     NL        1.06     OV        0.95     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.90     KP        0.99     
!   LA        1.01     MK        0.91     NL        1.07     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        1.02     
!   LA        0.93     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.94     KP        1.03     
!   LA        0.94     MK        1.08     NL        1.08     OV        0.95     
!   PT        1.04     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.93     MK        0.92     NL        1.06     OV        1.01     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.97     KP        1.00     
!   LA        0.95     MK        1.00     NL        1.08     OV        1.00     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     HN        0.99     KP        0.99     
!   LA        0.95     MK        1.01     NL        1.06     OV        1.02     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.95     KP        1.00     
!   LA        0.96     MK        0.95     NL        1.03     OV        1.00     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.99     KP        1.05     
!   LA        0.91     MK        1.02     NL        1.01     OV        0.95     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        1.02     KP        1.09     
!   LA        1.01     MK        1.03     NL        0.98     OV        1.00     
!   PT        1.04     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.064330Jy  sigma=1.428031
! Fit after  self-cal, rms=0.062678Jy  sigma=1.420237
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8406 mas, bmaj=2.784 mas, bpa=-51.89 degrees
! Estimated noise=0.322792 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169326 Jy
! Component: 100  -  total flux cleaned = 0.00229712 Jy
! Component: 150  -  total flux cleaned = 0.0027339 Jy
! Component: 200  -  total flux cleaned = 0.00311061 Jy
! Total flux subtracted in 200 components = 0.00311061 Jy
! Clean residual min=-0.002037 max=0.002672 Jy/beam
! Clean residual mean=-0.000018 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.17472 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.17472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062520Jy  sigma=1.416482
! Fit after  self-cal, rms=0.062513Jy  sigma=1.416028
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062513Jy  sigma=1.416028
! Fit after  self-cal, rms=0.062389Jy  sigma=1.415941
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8395 mas, bmaj=2.786 mas, bpa=-51.9 degrees
! Estimated noise=0.322278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00063295 Jy
! Component: 100  -  total flux cleaned = 0.000969285 Jy
! Component: 150  -  total flux cleaned = 0.00130004 Jy
! Component: 200  -  total flux cleaned = 0.00163035 Jy
! Total flux subtracted in 200 components = 0.00163035 Jy
! Clean residual min=-0.001924 max=0.002447 Jy/beam
! Clean residual mean=-0.000015 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.176351 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 69 components and 0.176351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062324Jy  sigma=1.414489
! Fit after  self-cal, rms=0.062319Jy  sigma=1.414354
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22.6, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022479 Jy
! Component: 100  -  total flux cleaned = 0.00278462 Jy
! Component: 150  -  total flux cleaned = 0.00324793 Jy
! Component: 200  -  total flux cleaned = 0.00372737 Jy
! Total flux subtracted in 200 components = 0.00372737 Jy
! Clean residual min=-0.001780 max=0.001846 Jy/beam
! Clean residual mean=-0.000010 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.180078 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 100 components and 0.180078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062218Jy  sigma=1.412030
! Fit after  self-cal, rms=0.062212Jy  sigma=1.411867
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062212Jy  sigma=1.411867
! Fit after  self-cal, rms=0.062143Jy  sigma=1.411758
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8405 mas, bmaj=2.785 mas, bpa=-51.94 degrees
! Estimated noise=0.32227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00078161 Jy
! Component: 100  -  total flux cleaned = 0.00105649 Jy
! Component: 150  -  total flux cleaned = 0.00139019 Jy
! Component: 200  -  total flux cleaned = 0.0015565 Jy
! Total flux subtracted in 200 components = 0.0015565 Jy
! Clean residual min=-0.001766 max=0.001712 Jy/beam
! Clean residual mean=-0.000008 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.181634 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 116 components and 0.181634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062109Jy  sigma=1.411051
! Fit after  self-cal, rms=0.062104Jy  sigma=1.410999
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305651 Jy
! Component: 100  -  total flux cleaned = 0.000463938 Jy
! Component: 150  -  total flux cleaned = 0.000612153 Jy
! Component: 200  -  total flux cleaned = 0.000751698 Jy
! Total flux subtracted in 200 components = 0.000751698 Jy
! Clean residual min=-0.001742 max=0.001687 Jy/beam
! Clean residual mean=-0.000007 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.182386 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 128 components and 0.182386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062085Jy  sigma=1.410576
! Fit after  self-cal, rms=0.062085Jy  sigma=1.410554
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062085Jy  sigma=1.410554
! Fit after  self-cal, rms=0.062110Jy  sigma=1.410512
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.994 mas, bmaj=3.177 mas, bpa=-59.96 degrees
! Estimated noise=0.412757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000526877 Jy
! Component: 100  -  total flux cleaned = 0.000816877 Jy
! Component: 150  -  total flux cleaned = 0.000986178 Jy
! Component: 200  -  total flux cleaned = 0.00106987 Jy
! Total flux subtracted in 200 components = 0.00106987 Jy
! Clean residual min=-0.001794 max=0.001517 Jy/beam
! Clean residual mean=-0.000010 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.183456 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 150 components and 0.183456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062100Jy  sigma=1.410351
! Fit after  self-cal, rms=0.062098Jy  sigma=1.410321
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.96873e-05 Jy
! Component: 100  -  total flux cleaned = 0.000117275 Jy
! Component: 150  -  total flux cleaned = 0.000117278 Jy
! Component: 200  -  total flux cleaned = 0.000144248 Jy
! Total flux subtracted in 200 components = 0.000144248 Jy
! Clean residual min=-0.001729 max=0.001448 Jy/beam
! Clean residual mean=-0.000009 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.1836 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 165 components and 0.1836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062094Jy  sigma=1.410248
! Fit after  self-cal, rms=0.062093Jy  sigma=1.410239
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8418 mas, bmaj=2.785 mas, bpa=-51.98 degrees
! Estimated noise=0.322481 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8418 x 2.785 at -51.98 degrees (North through East)
! Clean map  min=-0.0015913  max=0.092666 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6144 mas, bmaj=2.716 mas, bpa=-51.22 degrees
! Estimated noise=0.671818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0674841 Jy
! Component: 100  -  total flux cleaned = 0.100597 Jy
! Component: 150  -  total flux cleaned = 0.11891 Jy
! Component: 200  -  total flux cleaned = 0.131037 Jy
! Total flux subtracted in 200 components = 0.131037 Jy
! Clean residual min=-0.005225 max=0.007731 Jy/beam
! Clean residual mean=-0.000037 rms=0.001505 Jy/beam
! Combined flux in latest and established models = 0.131037 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.131037 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8418 mas, bmaj=2.785 mas, bpa=-51.98 degrees
! Estimated noise=0.322481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144516 Jy
! Component: 100  -  total flux cleaned = 0.0233558 Jy
! Component: 150  -  total flux cleaned = 0.0292995 Jy
! Component: 200  -  total flux cleaned = 0.0336454 Jy
! Total flux subtracted in 200 components = 0.0336454 Jy
! Clean residual min=-0.002908 max=0.002919 Jy/beam
! Clean residual mean=-0.000040 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.164682 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 42 components and 0.164682 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.994 mas, bmaj=3.177 mas, bpa=-59.96 degrees
! Estimated noise=0.412757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561663 Jy
! Component: 100  -  total flux cleaned = 0.00915325 Jy
! Component: 150  -  total flux cleaned = 0.011554 Jy
! Component: 200  -  total flux cleaned = 0.0132555 Jy
! Total flux subtracted in 200 components = 0.0132555 Jy
! Clean residual min=-0.002384 max=0.001976 Jy/beam
! Clean residual mean=-0.000030 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.177938 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128914 Jy
! Component: 100  -  total flux cleaned = 0.00196274 Jy
! Component: 150  -  total flux cleaned = 0.00236572 Jy
! Component: 200  -  total flux cleaned = 0.00272988 Jy
! Total flux subtracted in 200 components = 0.00272988 Jy
! Clean residual min=-0.001982 max=0.001535 Jy/beam
! Clean residual mean=-0.000019 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.180668 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 91 components and 0.180668 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8418 mas, bmaj=2.785 mas, bpa=-51.98 degrees
! Estimated noise=0.322481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055451 Jy
! Component: 100  -  total flux cleaned = 0.000811693 Jy
! Component: 150  -  total flux cleaned = 0.00111514 Jy
! Component: 200  -  total flux cleaned = 0.00134628 Jy
! Total flux subtracted in 200 components = 0.00134628 Jy
! Clean residual min=-0.001830 max=0.001770 Jy/beam
! Clean residual mean=-0.000007 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.182014 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 116 components and 0.182014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062142Jy  sigma=1.411454
! Fit after  self-cal, rms=0.062126Jy  sigma=1.411189
wmodel /J1339+6328_X_map.mod
! wmodel: Unable to open new model file: /J1339+6328_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1339+6328_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8418 x 2.785 at -51.98 degrees (North through East)
! Clean map  min=-0.0016963  max=0.091849 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1339+6328_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0918494 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000411991 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.34565 1.34565 2.6913 5.3826 10.7652 21.5304 43.0608 86.1216
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.091 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  222.94 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1339+6328_X_dfm.log closed on Thu May 19 21:48:44 2016