! Started logfile: /scr/pima/bg219g_uvs/J1339+6328_S_uvs.log on Thu Apr 7 07:17:06 2016 obs /scr/pima/bg219g_uvs/J1339+6328_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1339+6328_S_uva.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.91746 visibilities/baseline/integration-bin. ! Found source: J1339+6328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 3468 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1339+6328_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.071732Jy sigma=21.868148 ! Fit after self-cal, rms=0.695332Jy sigma=14.085176 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=10.48 mas, bpa=-51.45 degrees ! Estimated noise=0.934875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222246 Jy ! Component: 100 - total flux cleaned = 0.303557 Jy ! Total flux subtracted in 100 components = 0.303557 Jy ! Clean residual min=-0.018427 max=0.037816 Jy/beam ! Clean residual mean=0.000044 rms=0.006001 Jy/beam ! Combined flux in latest and established models = 0.303557 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.303557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140472Jy sigma=2.631592 ! Fit after self-cal, rms=0.140131Jy sigma=2.625526 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439047 Jy ! Component: 100 - total flux cleaned = 0.0701405 Jy ! Total flux subtracted in 100 components = 0.0701405 Jy ! Clean residual min=-0.012648 max=0.018148 Jy/beam ! Clean residual mean=0.000021 rms=0.003546 Jy/beam ! Combined flux in latest and established models = 0.373697 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.373697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118516Jy sigma=2.111260 ! Fit after self-cal, rms=0.118192Jy sigma=2.104290 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=10.54 mas, bpa=-52.01 degrees ! Estimated noise=0.636304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030214 Jy ! Component: 100 - total flux cleaned = 0.0464643 Jy ! Component: 150 - total flux cleaned = 0.0558434 Jy ! Component: 200 - total flux cleaned = 0.0613587 Jy ! Total flux subtracted in 200 components = 0.0613587 Jy ! Clean residual min=-0.007701 max=0.008375 Jy/beam ! Clean residual mean=0.000013 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 0.435056 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.435056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110944Jy sigma=1.912130 ! Fit after self-cal, rms=0.110675Jy sigma=1.905314 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.023 x 10.54 at -52.01 degrees (North through East) ! Clean map min=-0.0078689 max=0.30976 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.00 KP 0.96 ! LA 1.00 MK 1.03 NL 0.94 OV 0.99 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 1.05 KP 0.97 ! LA 0.99 MK 1.01 NL 0.99 OV 0.98 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.00 KP 0.97 ! LA 1.00 MK 1.01 NL 0.92 OV 0.99 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.18 HN 1.06 KP 1.02 ! LA 1.06 MK 1.00 NL 1.08 OV 1.03 ! PT 1.03 SC 1.02 ! ! ! Fit before self-cal, rms=0.110675Jy sigma=1.905314 ! Fit after self-cal, rms=0.110543Jy sigma=1.833979 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=10.59 mas, bpa=-51.95 degrees ! Estimated noise=0.631549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202035 Jy ! Component: 100 - total flux cleaned = 0.00148703 Jy ! Component: 150 - total flux cleaned = 0.000755616 Jy ! Component: 200 - total flux cleaned = 0.000221515 Jy ! Total flux subtracted in 200 components = 0.000221515 Jy ! Clean residual min=-0.004191 max=0.005163 Jy/beam ! Clean residual mean=0.000012 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.435278 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.435278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110294Jy sigma=1.828484 ! Fit after self-cal, rms=0.110370Jy sigma=1.827186 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110370Jy sigma=1.827186 ! Fit after self-cal, rms=0.110421Jy sigma=1.826818 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=10.6 mas, bpa=-51.95 degrees ! Estimated noise=0.631643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144529 Jy ! Component: 100 - total flux cleaned = 0.000895127 Jy ! Component: 150 - total flux cleaned = 0.00050665 Jy ! Component: 200 - total flux cleaned = 0.000270144 Jy ! Total flux subtracted in 200 components = 0.000270144 Jy ! Clean residual min=-0.004037 max=0.004758 Jy/beam ! Clean residual mean=0.000012 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.435548 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.435548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110336Jy sigma=1.824756 ! Fit after self-cal, rms=0.110328Jy sigma=1.824399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-100, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388788 Jy ! Component: 100 - total flux cleaned = 0.00433538 Jy ! Component: 150 - total flux cleaned = 0.00441669 Jy ! Component: 200 - total flux cleaned = 0.00429285 Jy ! Total flux subtracted in 200 components = 0.00429285 Jy ! Clean residual min=-0.003553 max=0.003579 Jy/beam ! Clean residual mean=0.000006 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.439841 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.439841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110099Jy sigma=1.820425 ! Fit after self-cal, rms=0.110084Jy sigma=1.820137 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110084Jy sigma=1.820137 ! Fit after self-cal, rms=0.109932Jy sigma=1.819850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=10.61 mas, bpa=-51.93 degrees ! Estimated noise=0.632293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012017 Jy ! Component: 100 - total flux cleaned = 0.00153686 Jy ! Component: 150 - total flux cleaned = 0.00158621 Jy ! Component: 200 - total flux cleaned = 0.00158495 Jy ! Total flux subtracted in 200 components = 0.00158495 Jy ! Clean residual min=-0.003414 max=0.003411 Jy/beam ! Clean residual mean=0.000005 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.441426 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 105 components and 0.441426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109868Jy sigma=1.818830 ! Fit after self-cal, rms=0.109863Jy sigma=1.818788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240557 Jy ! Component: 100 - total flux cleaned = 0.000241127 Jy ! Component: 150 - total flux cleaned = 0.000241705 Jy ! Component: 200 - total flux cleaned = 0.000280319 Jy ! Total flux subtracted in 200 components = 0.000280319 Jy ! Clean residual min=-0.003245 max=0.003285 Jy/beam ! Clean residual mean=0.000004 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.441706 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 119 components and 0.441706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109830Jy sigma=1.818196 ! Fit after self-cal, rms=0.109827Jy sigma=1.818179 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109827Jy sigma=1.818179 ! Fit after self-cal, rms=0.109769Jy sigma=1.818108 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.148 mas, bmaj=11.25 mas, bpa=-60.21 degrees ! Estimated noise=0.805022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736197 Jy ! Component: 100 - total flux cleaned = 0.000959606 Jy ! Component: 150 - total flux cleaned = 0.00111499 Jy ! Component: 200 - total flux cleaned = 0.00125596 Jy ! Total flux subtracted in 200 components = 0.00125596 Jy ! Clean residual min=-0.003905 max=0.003273 Jy/beam ! Clean residual mean=0.000009 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.442962 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.442962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109755Jy sigma=1.817860 ! Fit after self-cal, rms=0.109756Jy sigma=1.817845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213015 Jy ! Component: 100 - total flux cleaned = 0.000213176 Jy ! Component: 150 - total flux cleaned = 0.000243249 Jy ! Component: 200 - total flux cleaned = 0.000243888 Jy ! Total flux subtracted in 200 components = 0.000243888 Jy ! Clean residual min=-0.003840 max=0.003198 Jy/beam ! Clean residual mean=0.000007 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.443206 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 143 components and 0.443206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109751Jy sigma=1.817822 ! Fit after self-cal, rms=0.109749Jy sigma=1.817814 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=10.61 mas, bpa=-51.92 degrees ! Estimated noise=0.632804 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.035 x 10.61 at -51.92 degrees (North through East) ! Clean map min=-0.0036604 max=0.30697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=10.6 mas, bpa=-51.34 degrees ! Estimated noise=0.93934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223443 Jy ! Component: 100 - total flux cleaned = 0.305976 Jy ! Component: 150 - total flux cleaned = 0.350679 Jy ! Component: 200 - total flux cleaned = 0.378203 Jy ! Total flux subtracted in 200 components = 0.378203 Jy ! Clean residual min=-0.010874 max=0.015057 Jy/beam ! Clean residual mean=0.000022 rms=0.002979 Jy/beam ! Combined flux in latest and established models = 0.378203 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.378203 Jy ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=10.61 mas, bpa=-51.92 degrees ! Estimated noise=0.632804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283054 Jy ! Component: 100 - total flux cleaned = 0.0433864 Jy ! Component: 150 - total flux cleaned = 0.0521843 Jy ! Component: 200 - total flux cleaned = 0.0578357 Jy ! Total flux subtracted in 200 components = 0.0578357 Jy ! Clean residual min=-0.004996 max=0.004628 Jy/beam ! Clean residual mean=0.000015 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.436039 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 37 components and 0.436039 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.148 mas, bmaj=11.25 mas, bpa=-60.21 degrees ! Estimated noise=0.805022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057111 Jy ! Component: 100 - total flux cleaned = 0.00764431 Jy ! Component: 150 - total flux cleaned = 0.0079441 Jy ! Component: 200 - total flux cleaned = 0.00794036 Jy ! Total flux subtracted in 200 components = 0.00794036 Jy ! Clean residual min=-0.003878 max=0.003744 Jy/beam ! Clean residual mean=0.000010 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.443979 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.30424e-06 Jy ! Component: 100 - total flux cleaned = 1.08763e-05 Jy ! Component: 150 - total flux cleaned = -4.05443e-05 Jy ! Component: 200 - total flux cleaned = -9.03736e-05 Jy ! Total flux subtracted in 200 components = -9.03736e-05 Jy ! Clean residual min=-0.003759 max=0.003606 Jy/beam ! Clean residual mean=0.000009 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.443889 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 99 components and 0.443889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=10.61 mas, bpa=-51.92 degrees ! Estimated noise=0.632804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.82043e-06 Jy ! Component: 100 - total flux cleaned = -0.000177718 Jy ! Component: 150 - total flux cleaned = -0.000332347 Jy ! Component: 200 - total flux cleaned = -0.00040476 Jy ! Total flux subtracted in 200 components = -0.00040476 Jy ! Clean residual min=-0.003477 max=0.003619 Jy/beam ! Clean residual mean=0.000003 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.443484 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.443484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109869Jy sigma=1.819552 ! Fit after self-cal, rms=0.109854Jy sigma=1.819347 wmodel /scr/pima/bg219g_uvs/J1339+6328_S_map.mod ! Writing 123 model components to file: /scr/pima/bg219g_uvs/J1339+6328_S_map.mod wobs /scr/pima/bg219g_uvs/J1339+6328_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219g_uvs/J1339+6328_S_uvs.fits wwins /scr/pima/bg219g_uvs/J1339+6328_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219g_uvs/J1339+6328_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034657 Jy ! Component: 100 - total flux cleaned = -0.000461878 Jy ! Component: 150 - total flux cleaned = -0.000569242 Jy ! Component: 200 - total flux cleaned = -0.000727846 Jy ! Component: 250 - total flux cleaned = -0.000932323 Jy ! Component: 300 - total flux cleaned = -0.00132197 Jy ! Component: 350 - total flux cleaned = -0.00160459 Jy ! Component: 400 - total flux cleaned = -0.00178847 Jy ! Component: 450 - total flux cleaned = -0.00201309 Jy ! Component: 500 - total flux cleaned = -0.00227553 Jy ! Component: 550 - total flux cleaned = -0.0025738 Jy ! Component: 600 - total flux cleaned = -0.00253175 Jy ! Component: 650 - total flux cleaned = -0.00249095 Jy ! Component: 700 - total flux cleaned = -0.00245091 Jy ! Component: 750 - total flux cleaned = -0.00237244 Jy ! Component: 800 - total flux cleaned = -0.00229452 Jy ! Component: 850 - total flux cleaned = -0.00214109 Jy ! Component: 900 - total flux cleaned = -0.00199063 Jy ! Component: 950 - total flux cleaned = -0.00180576 Jy ! Component: 1000 - total flux cleaned = -0.00173266 Jy ! Component: 1050 - total flux cleaned = -0.00158908 Jy ! Component: 1100 - total flux cleaned = -0.001518 Jy ! Component: 1150 - total flux cleaned = -0.00141375 Jy ! Component: 1200 - total flux cleaned = -0.001311 Jy ! Component: 1250 - total flux cleaned = -0.00127686 Jy ! Component: 1300 - total flux cleaned = -0.00124311 Jy ! Component: 1350 - total flux cleaned = -0.0011433 Jy ! Component: 1400 - total flux cleaned = -0.00107805 Jy ! Component: 1450 - total flux cleaned = -0.000948797 Jy ! Component: 1500 - total flux cleaned = -0.000917263 Jy ! Component: 1550 - total flux cleaned = -0.000727542 Jy ! Component: 1600 - total flux cleaned = -0.000696466 Jy ! Component: 1650 - total flux cleaned = -0.000603977 Jy ! Component: 1700 - total flux cleaned = -0.000512591 Jy ! Component: 1750 - total flux cleaned = -0.000452173 Jy ! Component: 1800 - total flux cleaned = -0.000422347 Jy ! Component: 1850 - total flux cleaned = -0.000363117 Jy ! Component: 1900 - total flux cleaned = -0.000304463 Jy ! Component: 1950 - total flux cleaned = -0.000130543 Jy ! Component: 2000 - total flux cleaned = -7.33518e-05 Jy ! Component: 2050 - total flux cleaned = 1.16579e-05 Jy ! Component: 2100 - total flux cleaned = 0.000152208 Jy ! Component: 2150 - total flux cleaned = 0.000319356 Jy ! Component: 2200 - total flux cleaned = 0.00040209 Jy ! Component: 2250 - total flux cleaned = 0.000566597 Jy ! Component: 2300 - total flux cleaned = 0.000621003 Jy ! Component: 2350 - total flux cleaned = 0.000728803 Jy ! Component: 2400 - total flux cleaned = 0.00080893 Jy ! Component: 2450 - total flux cleaned = 0.000861993 Jy ! Component: 2500 - total flux cleaned = 0.000941082 Jy ! Component: 2550 - total flux cleaned = 0.00104537 Jy ! Component: 2600 - total flux cleaned = 0.00112315 Jy ! Component: 2650 - total flux cleaned = 0.00120023 Jy ! Component: 2700 - total flux cleaned = 0.00127666 Jy ! Component: 2750 - total flux cleaned = 0.00147849 Jy ! Component: 2800 - total flux cleaned = 0.00152846 Jy ! Component: 2850 - total flux cleaned = 0.00162814 Jy ! Component: 2900 - total flux cleaned = 0.00170225 Jy ! Component: 2950 - total flux cleaned = 0.00175161 Jy ! Component: 3000 - total flux cleaned = 0.00192243 Jy ! Component: 3050 - total flux cleaned = 0.00197085 Jy ! Component: 3100 - total flux cleaned = 0.00211533 Jy ! Component: 3150 - total flux cleaned = 0.00216321 Jy ! Component: 3200 - total flux cleaned = 0.00235326 Jy ! Component: 3250 - total flux cleaned = 0.00235311 Jy ! Component: 3300 - total flux cleaned = 0.0024707 Jy ! Component: 3350 - total flux cleaned = 0.00251762 Jy ! Component: 3400 - total flux cleaned = 0.00268038 Jy ! Component: 3450 - total flux cleaned = 0.00284235 Jy ! Component: 3500 - total flux cleaned = 0.00295772 Jy ! Component: 3550 - total flux cleaned = 0.0031183 Jy ! Component: 3600 - total flux cleaned = 0.0032098 Jy ! Component: 3650 - total flux cleaned = 0.00334644 Jy ! Component: 3700 - total flux cleaned = 0.00350504 Jy ! Component: 3750 - total flux cleaned = 0.00361786 Jy ! Component: 3800 - total flux cleaned = 0.00379781 Jy ! Component: 3850 - total flux cleaned = 0.00393219 Jy ! Component: 3900 - total flux cleaned = 0.00399906 Jy ! Component: 3950 - total flux cleaned = 0.00408792 Jy ! Component: 4000 - total flux cleaned = 0.00430929 Jy ! Component: 4050 - total flux cleaned = 0.00435326 Jy ! Total flux subtracted in 4096 components = 0.0044852 Jy ! Clean residual min=-0.001217 max=0.001335 Jy/beam ! Clean residual mean=-0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.447969 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 382 components and 0.447969 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219g_uvs/J1339+6328_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.035 x 10.61 at -51.92 degrees (North through East) ! Clean map min=-0.0027413 max=0.30622 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1339+6328_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.306221 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000385587 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.377754 0.377754 0.755509 1.51102 3.02204 6.04407 12.0881 24.1763 48.3526 96.7051 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.306 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 794.166 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1339+6328_S_uvs.log closed on Thu Apr 7 07:17:10 2016