! Started logfile: /scr/pima/bg219g_uvs/J1334-1150_S_uvs.log on Thu Apr 7 07:16:58 2016 obs /scr/pima/bg219g_uvs/J1334-1150_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1334-1150_S_uva.fits ! AN table 1: 21 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.821429 visibilities/baseline/integration-bin. ! Found source: J1334-1150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 2484 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1334-1150_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017296Jy sigma=19.785158 ! Fit after self-cal, rms=0.848650Jy sigma=16.069237 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=7.533 mas, bpa=-7.004 degrees ! Estimated noise=1.15212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116804 Jy ! Component: 100 - total flux cleaned = 0.154672 Jy ! Total flux subtracted in 100 components = 0.154672 Jy ! Clean residual min=-0.013085 max=0.024284 Jy/beam ! Clean residual mean=0.000110 rms=0.004923 Jy/beam ! Combined flux in latest and established models = 0.154672 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.154672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098729Jy sigma=1.661682 ! Fit after self-cal, rms=0.098552Jy sigma=1.659187 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=8.598 mas, bpa=-5.389 degrees ! Estimated noise=0.81663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297336 Jy ! Component: 100 - total flux cleaned = 0.0439213 Jy ! Component: 150 - total flux cleaned = 0.0510173 Jy ! Component: 200 - total flux cleaned = 0.0512303 Jy ! Total flux subtracted in 200 components = 0.0512303 Jy ! Clean residual min=-0.010773 max=0.023492 Jy/beam ! Clean residual mean=0.000100 rms=0.004120 Jy/beam ! Combined flux in latest and established models = 0.205902 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.205902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092973Jy sigma=1.440383 ! Fit after self-cal, rms=0.092878Jy sigma=1.439135 ! Inverting map ! Added new window around map position (-29.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204038 Jy ! Component: 100 - total flux cleaned = 0.027405 Jy ! Component: 150 - total flux cleaned = 0.028037 Jy ! Component: 200 - total flux cleaned = 0.0275693 Jy ! Total flux subtracted in 200 components = 0.0275693 Jy ! Clean residual min=-0.007504 max=0.012703 Jy/beam ! Clean residual mean=0.000039 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.233471 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 73 components and 0.233471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088716Jy sigma=1.341918 ! Fit after self-cal, rms=0.088348Jy sigma=1.332204 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.816 x 8.598 at -5.389 degrees (North through East) ! Clean map min=-0.0069745 max=0.15741 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.088348Jy sigma=1.332204 ! Fit after self-cal, rms=0.088348Jy sigma=1.332204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=8.598 mas, bpa=-5.389 degrees ! Estimated noise=0.81663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111876 Jy ! Component: 100 - total flux cleaned = 0.0140493 Jy ! Component: 150 - total flux cleaned = 0.0152593 Jy ! Component: 200 - total flux cleaned = 0.0157782 Jy ! Total flux subtracted in 200 components = 0.0157782 Jy ! Clean residual min=-0.007179 max=0.008334 Jy/beam ! Clean residual mean=0.000016 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.24925 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 100 components and 0.24925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085821Jy sigma=1.305607 ! Fit after self-cal, rms=0.085569Jy sigma=1.299653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085569Jy sigma=1.299653 ! Fit after self-cal, rms=0.085284Jy sigma=1.295917 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=8.562 mas, bpa=-5.314 degrees ! Estimated noise=0.813791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028172 Jy ! Component: 100 - total flux cleaned = 0.00314335 Jy ! Component: 150 - total flux cleaned = 0.00326767 Jy ! Component: 200 - total flux cleaned = 0.00326551 Jy ! Total flux subtracted in 200 components = 0.00326551 Jy ! Clean residual min=-0.004832 max=0.004852 Jy/beam ! Clean residual mean=0.000005 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.252515 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 120 components and 0.252515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084550Jy sigma=1.289510 ! Fit after self-cal, rms=0.084521Jy sigma=1.288413 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137171 Jy ! Component: 100 - total flux cleaned = 0.00147623 Jy ! Component: 150 - total flux cleaned = 0.00138422 Jy ! Component: 200 - total flux cleaned = 0.00122445 Jy ! Total flux subtracted in 200 components = 0.00122445 Jy ! Clean residual min=-0.004994 max=0.004470 Jy/beam ! Clean residual mean=0.000004 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.25374 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.25374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084181Jy sigma=1.285453 ! Fit after self-cal, rms=0.084180Jy sigma=1.284957 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084180Jy sigma=1.284957 ! Fit after self-cal, rms=0.083200Jy sigma=1.284652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=8.539 mas, bpa=-5.203 degrees ! Estimated noise=0.811491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000769892 Jy ! Component: 100 - total flux cleaned = 0.00102667 Jy ! Component: 150 - total flux cleaned = 0.000959617 Jy ! Component: 200 - total flux cleaned = 0.000897189 Jy ! Total flux subtracted in 200 components = 0.000897189 Jy ! Clean residual min=-0.005149 max=0.004374 Jy/beam ! Clean residual mean=0.000007 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.254637 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 138 components and 0.254637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082960Jy sigma=1.282986 ! Fit after self-cal, rms=0.082959Jy sigma=1.282660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715286 Jy ! Component: 100 - total flux cleaned = 0.000775986 Jy ! Component: 150 - total flux cleaned = 0.000720177 Jy ! Component: 200 - total flux cleaned = 0.000620502 Jy ! Total flux subtracted in 200 components = 0.000620502 Jy ! Clean residual min=-0.005150 max=0.004291 Jy/beam ! Clean residual mean=0.000006 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.255257 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 160 components and 0.255257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082829Jy sigma=1.281651 ! Fit after self-cal, rms=0.082836Jy sigma=1.281482 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082836Jy sigma=1.281482 ! Fit after self-cal, rms=0.082268Jy sigma=1.276216 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.814 mas, bmaj=15.63 mas, bpa=10.85 degrees ! Estimated noise=0.954366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148368 Jy ! Component: 100 - total flux cleaned = -0.00102148 Jy ! Component: 150 - total flux cleaned = -0.000796387 Jy ! Component: 200 - total flux cleaned = -0.000602494 Jy ! Total flux subtracted in 200 components = -0.000602494 Jy ! Clean residual min=-0.005821 max=0.004180 Jy/beam ! Clean residual mean=0.000011 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.254655 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 176 components and 0.254655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082188Jy sigma=1.275307 ! Fit after self-cal, rms=0.082236Jy sigma=1.275161 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030815 Jy ! Component: 100 - total flux cleaned = 0.00037678 Jy ! Component: 150 - total flux cleaned = 0.000440618 Jy ! Component: 200 - total flux cleaned = 0.000565095 Jy ! Total flux subtracted in 200 components = 0.000565095 Jy ! Clean residual min=-0.005794 max=0.004165 Jy/beam ! Clean residual mean=0.000009 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.25522 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 190 components and 0.25522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082199Jy sigma=1.274864 ! Fit after self-cal, rms=0.082202Jy sigma=1.274843 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=8.527 mas, bpa=-5.17 degrees ! Estimated noise=0.805825 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 8.527 at -5.17 degrees (North through East) ! Clean map min=-0.0045435 max=0.15004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=7.439 mas, bpa=-6.708 degrees ! Estimated noise=1.13529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114427 Jy ! Component: 100 - total flux cleaned = 0.155055 Jy ! Component: 150 - total flux cleaned = 0.180975 Jy ! Component: 200 - total flux cleaned = 0.198593 Jy ! Total flux subtracted in 200 components = 0.198593 Jy ! Clean residual min=-0.008480 max=0.012119 Jy/beam ! Clean residual mean=0.000054 rms=0.002814 Jy/beam ! Combined flux in latest and established models = 0.198593 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.198593 Jy ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=8.527 mas, bpa=-5.17 degrees ! Estimated noise=0.805825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186843 Jy ! Component: 100 - total flux cleaned = 0.0301527 Jy ! Component: 150 - total flux cleaned = 0.0380229 Jy ! Component: 200 - total flux cleaned = 0.0436507 Jy ! Total flux subtracted in 200 components = 0.0436507 Jy ! Clean residual min=-0.005462 max=0.006281 Jy/beam ! Clean residual mean=0.000024 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.242244 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 93 components and 0.242244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.814 mas, bmaj=15.63 mas, bpa=10.85 degrees ! Estimated noise=0.954366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608182 Jy ! Component: 100 - total flux cleaned = 0.00813888 Jy ! Component: 150 - total flux cleaned = 0.00950586 Jy ! Component: 200 - total flux cleaned = 0.010456 Jy ! Total flux subtracted in 200 components = 0.010456 Jy ! Clean residual min=-0.005321 max=0.004339 Jy/beam ! Clean residual mean=0.000010 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.2527 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676121 Jy ! Component: 100 - total flux cleaned = 0.000984534 Jy ! Component: 150 - total flux cleaned = 0.00125291 Jy ! Component: 200 - total flux cleaned = 0.00144816 Jy ! Total flux subtracted in 200 components = 0.00144816 Jy ! Clean residual min=-0.005143 max=0.004088 Jy/beam ! Clean residual mean=0.000007 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.254148 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 138 components and 0.254148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=8.527 mas, bpa=-5.17 degrees ! Estimated noise=0.805825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144538 Jy ! Component: 100 - total flux cleaned = 0.000500391 Jy ! Component: 150 - total flux cleaned = 0.000801664 Jy ! Component: 200 - total flux cleaned = 0.000936445 Jy ! Total flux subtracted in 200 components = 0.000936445 Jy ! Clean residual min=-0.004894 max=0.004891 Jy/beam ! Clean residual mean=0.000003 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.255084 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 160 components and 0.255084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082465Jy sigma=1.276250 ! Fit after self-cal, rms=0.082316Jy sigma=1.274993 wmodel /scr/pima/bg219g_uvs/J1334-1150_S_map.mod ! Writing 160 model components to file: /scr/pima/bg219g_uvs/J1334-1150_S_map.mod wobs /scr/pima/bg219g_uvs/J1334-1150_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219g_uvs/J1334-1150_S_uvs.fits wwins /scr/pima/bg219g_uvs/J1334-1150_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219g_uvs/J1334-1150_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107987 Jy ! Component: 100 - total flux cleaned = -0.0020379 Jy ! Component: 150 - total flux cleaned = -0.00250646 Jy ! Component: 200 - total flux cleaned = -0.00263439 Jy ! Component: 250 - total flux cleaned = -0.00222734 Jy ! Component: 300 - total flux cleaned = -0.00200308 Jy ! Component: 350 - total flux cleaned = -0.00179008 Jy ! Component: 400 - total flux cleaned = -0.00163744 Jy ! Component: 450 - total flux cleaned = -0.00144123 Jy ! Component: 500 - total flux cleaned = -0.00148974 Jy ! Component: 550 - total flux cleaned = -0.00153622 Jy ! Component: 600 - total flux cleaned = -0.00149204 Jy ! Component: 650 - total flux cleaned = -0.00171279 Jy ! Component: 700 - total flux cleaned = -0.0017542 Jy ! Component: 750 - total flux cleaned = -0.00175377 Jy ! Component: 800 - total flux cleaned = -0.00175375 Jy ! Component: 850 - total flux cleaned = -0.00179351 Jy ! Component: 900 - total flux cleaned = -0.00183245 Jy ! Component: 950 - total flux cleaned = -0.00194678 Jy ! Component: 1000 - total flux cleaned = -0.00209435 Jy ! Component: 1050 - total flux cleaned = -0.00216636 Jy ! Component: 1100 - total flux cleaned = -0.00227232 Jy ! Component: 1150 - total flux cleaned = -0.00237661 Jy ! Component: 1200 - total flux cleaned = -0.00251297 Jy ! Component: 1250 - total flux cleaned = -0.00264601 Jy ! Component: 1300 - total flux cleaned = -0.00264585 Jy ! Component: 1350 - total flux cleaned = -0.00271083 Jy ! Component: 1400 - total flux cleaned = -0.00277499 Jy ! Component: 1450 - total flux cleaned = -0.00280599 Jy ! Component: 1500 - total flux cleaned = -0.0027752 Jy ! Component: 1550 - total flux cleaned = -0.00271479 Jy ! Component: 1600 - total flux cleaned = -0.00256663 Jy ! Component: 1650 - total flux cleaned = -0.00247927 Jy ! Component: 1700 - total flux cleaned = -0.00245077 Jy ! Component: 1750 - total flux cleaned = -0.00236547 Jy ! Component: 1800 - total flux cleaned = -0.00228156 Jy ! Component: 1850 - total flux cleaned = -0.0022266 Jy ! Component: 1900 - total flux cleaned = -0.0021722 Jy ! Component: 1950 - total flux cleaned = -0.00211866 Jy ! Component: 2000 - total flux cleaned = -0.00206571 Jy ! Component: 2050 - total flux cleaned = -0.00203978 Jy ! Component: 2100 - total flux cleaned = -0.00203986 Jy ! Component: 2150 - total flux cleaned = -0.00198902 Jy ! Component: 2200 - total flux cleaned = -0.001939 Jy ! Component: 2250 - total flux cleaned = -0.00193891 Jy ! Component: 2300 - total flux cleaned = -0.00191412 Jy ! Component: 2350 - total flux cleaned = -0.00186528 Jy ! Component: 2400 - total flux cleaned = -0.0017453 Jy ! Component: 2450 - total flux cleaned = -0.00174503 Jy ! Component: 2500 - total flux cleaned = -0.00162756 Jy ! Component: 2550 - total flux cleaned = -0.00155789 Jy ! Component: 2600 - total flux cleaned = -0.00153505 Jy ! Component: 2650 - total flux cleaned = -0.00151219 Jy ! Component: 2700 - total flux cleaned = -0.00146689 Jy ! Component: 2750 - total flux cleaned = -0.00142191 Jy ! Component: 2800 - total flux cleaned = -0.00131101 Jy ! Component: 2850 - total flux cleaned = -0.00128903 Jy ! Component: 2900 - total flux cleaned = -0.00115816 Jy ! Component: 2950 - total flux cleaned = -0.00107179 Jy ! Component: 3000 - total flux cleaned = -0.00102868 Jy ! Component: 3050 - total flux cleaned = -0.000943328 Jy ! Component: 3100 - total flux cleaned = -0.00085873 Jy ! Component: 3150 - total flux cleaned = -0.000837849 Jy ! Component: 3200 - total flux cleaned = -0.000879572 Jy ! Component: 3250 - total flux cleaned = -0.000837845 Jy ! Component: 3300 - total flux cleaned = -0.000879249 Jy ! Component: 3350 - total flux cleaned = -0.000879138 Jy ! Component: 3400 - total flux cleaned = -0.00094042 Jy ! Component: 3450 - total flux cleaned = -0.000858766 Jy ! Component: 3500 - total flux cleaned = -0.000940023 Jy ! Component: 3550 - total flux cleaned = -0.000940034 Jy ! Component: 3600 - total flux cleaned = -0.000960088 Jy ! Component: 3650 - total flux cleaned = -0.000899849 Jy ! Component: 3700 - total flux cleaned = -0.000919933 Jy ! Component: 3750 - total flux cleaned = -0.000920013 Jy ! Component: 3800 - total flux cleaned = -0.000939835 Jy ! Component: 3850 - total flux cleaned = -0.00092 Jy ! Component: 3900 - total flux cleaned = -0.000900212 Jy ! Component: 3950 - total flux cleaned = -0.000919992 Jy ! Component: 4000 - total flux cleaned = -0.000919939 Jy ! Component: 4050 - total flux cleaned = -0.000919972 Jy ! Total flux subtracted in 4096 components = -0.000900391 Jy ! Clean residual min=-0.001150 max=0.001150 Jy/beam ! Clean residual mean=0.000009 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.254184 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 368 components and 0.254184 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219g_uvs/J1334-1150_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 8.527 at -5.17 degrees (North through East) ! Clean map min=-0.0033258 max=0.14619 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1334-1150_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146189 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000323976 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.664841 0.664841 1.32968 2.65937 5.31873 10.6375 21.2749 42.5498 85.0997 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.146 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 451.235 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1334-1150_S_uvs.log closed on Thu Apr 7 07:17:02 2016