! Started logfile: /scr/pima/bg219g_uvs/J1333-2356_X_uvs.log on Thu Apr 7 09:50:31 2016 obs /scr/pima/bg219g_uvs/J1333-2356_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219g_uvs/J1333-2356_X_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961481 visibilities/baseline/integration-bin. ! Found source: J1333-2356 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 15576 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1333-2356_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.020739Jy sigma=20.045873 ! Fit after self-cal, rms=0.882447Jy sigma=17.251537 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6355 mas, bmaj=1.753 mas, bpa=2.678 degrees ! Estimated noise=0.739755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0932616 Jy ! Component: 100 - total flux cleaned = 0.116095 Jy ! Total flux subtracted in 100 components = 0.116095 Jy ! Clean residual min=-0.005558 max=0.008992 Jy/beam ! Clean residual mean=-0.000002 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.116095 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.116095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.090838Jy sigma=1.486059 ! Fit after self-cal, rms=0.090741Jy sigma=1.484702 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.783 mas, bmaj=2.083 mas, bpa=1.332 degrees ! Estimated noise=0.406472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109324 Jy ! Component: 100 - total flux cleaned = 0.0149354 Jy ! Component: 150 - total flux cleaned = 0.0155882 Jy ! Component: 200 - total flux cleaned = 0.0156435 Jy ! Total flux subtracted in 200 components = 0.0156435 Jy ! Clean residual min=-0.003842 max=0.006080 Jy/beam ! Clean residual mean=-0.000003 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.131738 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.131738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.089907Jy sigma=1.453411 ! Fit after self-cal, rms=0.089874Jy sigma=1.453156 ! Inverting map ! Added new window around map position (1.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044869 Jy ! Component: 100 - total flux cleaned = 0.00512363 Jy ! Component: 150 - total flux cleaned = 0.00512376 Jy ! Component: 200 - total flux cleaned = 0.00518134 Jy ! Total flux subtracted in 200 components = 0.00518134 Jy ! Clean residual min=-0.003310 max=0.004512 Jy/beam ! Clean residual mean=-0.000000 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.13692 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.13692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.089531Jy sigma=1.447417 ! Fit after self-cal, rms=0.089527Jy sigma=1.446824 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.783 x 2.083 at 1.332 degrees (North through East) ! Clean map min=-0.0030185 max=0.12184 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 1.17 KP 0.98 ! LA 1.13 MK 1.00 NL 0.99 OV 0.95 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.14 HN 1.18 KP 0.96 ! LA 1.01 MK 1.01 NL 1.00 OV 0.95 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.16 HN 1.02 KP 0.98 ! LA 0.91 MK 1.03 NL 0.98 OV 0.95 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.16 HN 1.11 KP 1.00 ! LA 0.96 MK 1.01 NL 0.99 OV 0.98 ! PT 0.97 SC 1.02 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 1.11 KP 0.99 ! LA 0.98 MK 1.00 NL 0.98 OV 0.91 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 1.18 KP 0.96 ! LA 0.94 MK 1.02 NL 1.00 OV 0.98 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.10 HN 1.06 KP 0.97 ! LA 1.09 MK 1.00 NL 0.94 OV 0.95 ! PT 0.99 SC 0.93 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.089527Jy sigma=1.446824 ! Fit after self-cal, rms=0.094622Jy sigma=1.435361 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7848 mas, bmaj=2.07 mas, bpa=1.737 degrees ! Estimated noise=0.405836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982568 Jy ! Component: 100 - total flux cleaned = 0.00115677 Jy ! Component: 150 - total flux cleaned = 0.00115766 Jy ! Component: 200 - total flux cleaned = 0.00108789 Jy ! Total flux subtracted in 200 components = 0.00108789 Jy ! Clean residual min=-0.002428 max=0.002200 Jy/beam ! Clean residual mean=0.000001 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.138007 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.138007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094592Jy sigma=1.434918 ! Fit after self-cal, rms=0.094729Jy sigma=1.434621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094729Jy sigma=1.434621 ! Fit after self-cal, rms=0.094794Jy sigma=1.434590 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7849 mas, bmaj=2.069 mas, bpa=1.783 degrees ! Estimated noise=0.40539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240081 Jy ! Component: 100 - total flux cleaned = 0.0001456 Jy ! Component: 150 - total flux cleaned = 8.20122e-05 Jy ! Component: 200 - total flux cleaned = 4.28409e-05 Jy ! Total flux subtracted in 200 components = 4.28409e-05 Jy ! Clean residual min=-0.002383 max=0.002232 Jy/beam ! Clean residual mean=0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.13805 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.13805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094777Jy sigma=1.434409 ! Fit after self-cal, rms=0.094782Jy sigma=1.434366 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100059 Jy ! Component: 100 - total flux cleaned = 5.92315e-05 Jy ! Component: 150 - total flux cleaned = 4.02889e-06 Jy ! Component: 200 - total flux cleaned = -2.93308e-05 Jy ! Total flux subtracted in 200 components = -2.93308e-05 Jy ! Clean residual min=-0.002365 max=0.002240 Jy/beam ! Clean residual mean=0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.138021 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.138021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094771Jy sigma=1.434248 ! Fit after self-cal, rms=0.094771Jy sigma=1.434222 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094771Jy sigma=1.434222 ! Fit after self-cal, rms=0.094999Jy sigma=1.434211 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7855 mas, bmaj=2.07 mas, bpa=1.82 degrees ! Estimated noise=0.405998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162215 Jy ! Component: 100 - total flux cleaned = 0.000126721 Jy ! Component: 150 - total flux cleaned = 9.40362e-05 Jy ! Component: 200 - total flux cleaned = 6.42854e-05 Jy ! Total flux subtracted in 200 components = 6.42854e-05 Jy ! Clean residual min=-0.002365 max=0.002231 Jy/beam ! Clean residual mean=0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.138085 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.138085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094990Jy sigma=1.434114 ! Fit after self-cal, rms=0.094993Jy sigma=1.434089 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.99298e-05 Jy ! Component: 100 - total flux cleaned = 3.52616e-05 Jy ! Component: 150 - total flux cleaned = 8.19828e-06 Jy ! Component: 200 - total flux cleaned = -1.7215e-05 Jy ! Total flux subtracted in 200 components = -1.7215e-05 Jy ! Clean residual min=-0.002354 max=0.002236 Jy/beam ! Clean residual mean=0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.138068 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.138068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094986Jy sigma=1.434026 ! Fit after self-cal, rms=0.094986Jy sigma=1.434012 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094986Jy sigma=1.434012 ! Fit after self-cal, rms=0.095046Jy sigma=1.434001 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.103 mas, bmaj=5.511 mas, bpa=8.694 degrees ! Estimated noise=0.531456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.30081e-06 Jy ! Component: 100 - total flux cleaned = 8.0286e-05 Jy ! Component: 150 - total flux cleaned = 9.83455e-05 Jy ! Component: 200 - total flux cleaned = 9.81367e-05 Jy ! Total flux subtracted in 200 components = 9.81367e-05 Jy ! Clean residual min=-0.002551 max=0.002439 Jy/beam ! Clean residual mean=0.000001 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.138166 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.138166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.095044Jy sigma=1.434018 ! Fit after self-cal, rms=0.095042Jy sigma=1.434002 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.0992e-05 Jy ! Component: 100 - total flux cleaned = 3.24692e-06 Jy ! Component: 150 - total flux cleaned = 1.09755e-05 Jy ! Component: 200 - total flux cleaned = 1.82982e-05 Jy ! Total flux subtracted in 200 components = 1.82982e-05 Jy ! Clean residual min=-0.002572 max=0.002438 Jy/beam ! Clean residual mean=0.000001 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.138184 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.138184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.095041Jy sigma=1.434030 ! Fit after self-cal, rms=0.095039Jy sigma=1.434021 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7859 mas, bmaj=2.071 mas, bpa=1.835 degrees ! Estimated noise=0.406289 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7859 x 2.071 at 1.835 degrees (North through East) ! Clean map min=-0.0020759 max=0.12157 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6365 mas, bmaj=1.741 mas, bpa=3.219 degrees ! Estimated noise=0.744036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0935774 Jy ! Component: 100 - total flux cleaned = 0.116535 Jy ! Component: 150 - total flux cleaned = 0.125946 Jy ! Component: 200 - total flux cleaned = 0.131252 Jy ! Total flux subtracted in 200 components = 0.131252 Jy ! Clean residual min=-0.005007 max=0.004118 Jy/beam ! Clean residual mean=-0.000002 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.131252 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.131252 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7859 mas, bmaj=2.071 mas, bpa=1.835 degrees ! Estimated noise=0.406289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437456 Jy ! Component: 100 - total flux cleaned = 0.00593657 Jy ! Component: 150 - total flux cleaned = 0.00621871 Jy ! Component: 200 - total flux cleaned = 0.00639537 Jy ! Total flux subtracted in 200 components = 0.00639537 Jy ! Clean residual min=-0.002604 max=0.002214 Jy/beam ! Clean residual mean=0.000000 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.137647 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.137647 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.103 mas, bmaj=5.511 mas, bpa=8.694 degrees ! Estimated noise=0.531456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437555 Jy ! Component: 100 - total flux cleaned = 0.000420205 Jy ! Component: 150 - total flux cleaned = 0.000419368 Jy ! Component: 200 - total flux cleaned = 0.000403169 Jy ! Total flux subtracted in 200 components = 0.000403169 Jy ! Clean residual min=-0.002589 max=0.002306 Jy/beam ! Clean residual mean=0.000001 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.138051 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.55113e-05 Jy ! Component: 100 - total flux cleaned = 1.86688e-06 Jy ! Component: 150 - total flux cleaned = 1.97393e-06 Jy ! Component: 200 - total flux cleaned = 2.07983e-06 Jy ! Total flux subtracted in 200 components = 2.07983e-06 Jy ! Clean residual min=-0.002605 max=0.002306 Jy/beam ! Clean residual mean=0.000001 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.138053 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.138053 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7859 mas, bmaj=2.071 mas, bpa=1.835 degrees ! Estimated noise=0.406289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256646 Jy ! Component: 100 - total flux cleaned = -0.000351864 Jy ! Component: 150 - total flux cleaned = -0.000350881 Jy ! Component: 200 - total flux cleaned = -0.000324604 Jy ! Total flux subtracted in 200 components = -0.000324604 Jy ! Clean residual min=-0.002576 max=0.002202 Jy/beam ! Clean residual mean=0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.137728 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.137728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.095075Jy sigma=1.434733 ! Fit after self-cal, rms=0.095089Jy sigma=1.434588 wmodel /scr/pima/bg219g_uvs/J1333-2356_X_map.mod ! Writing 48 model components to file: /scr/pima/bg219g_uvs/J1333-2356_X_map.mod wobs /scr/pima/bg219g_uvs/J1333-2356_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219g_uvs/J1333-2356_X_uvs.fits wwins /scr/pima/bg219g_uvs/J1333-2356_X_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219g_uvs/J1333-2356_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542477 Jy ! Component: 100 - total flux cleaned = -0.000846974 Jy ! Component: 150 - total flux cleaned = -0.00106426 Jy ! Component: 200 - total flux cleaned = -0.00123594 Jy ! Component: 250 - total flux cleaned = -0.0013339 Jy ! Component: 300 - total flux cleaned = -0.00145873 Jy ! Component: 350 - total flux cleaned = -0.00157738 Jy ! Component: 400 - total flux cleaned = -0.00163344 Jy ! Component: 450 - total flux cleaned = -0.0017432 Jy ! Component: 500 - total flux cleaned = -0.00187691 Jy ! Component: 550 - total flux cleaned = -0.00195474 Jy ! Component: 600 - total flux cleaned = -0.00203077 Jy ! Component: 650 - total flux cleaned = -0.00210439 Jy ! Component: 700 - total flux cleaned = -0.00217609 Jy ! Component: 750 - total flux cleaned = -0.00224642 Jy ! Component: 800 - total flux cleaned = -0.00233712 Jy ! Component: 850 - total flux cleaned = -0.00240369 Jy ! Component: 900 - total flux cleaned = -0.00249043 Jy ! Component: 950 - total flux cleaned = -0.00259677 Jy ! Component: 1000 - total flux cleaned = -0.00270107 Jy ! Component: 1050 - total flux cleaned = -0.0028443 Jy ! Component: 1100 - total flux cleaned = -0.00286486 Jy ! Component: 1150 - total flux cleaned = -0.00294419 Jy ! Component: 1200 - total flux cleaned = -0.00302204 Jy ! Component: 1250 - total flux cleaned = -0.0030798 Jy ! Component: 1300 - total flux cleaned = -0.00311757 Jy ! Component: 1350 - total flux cleaned = -0.00319147 Jy ! Component: 1400 - total flux cleaned = -0.0032278 Jy ! Component: 1450 - total flux cleaned = -0.00331789 Jy ! Component: 1500 - total flux cleaned = -0.00328206 Jy ! Component: 1550 - total flux cleaned = -0.00328164 Jy ! Component: 1600 - total flux cleaned = -0.00326443 Jy ! Component: 1650 - total flux cleaned = -0.00333255 Jy ! Component: 1700 - total flux cleaned = -0.0033155 Jy ! Component: 1750 - total flux cleaned = -0.00336517 Jy ! Component: 1800 - total flux cleaned = -0.00339813 Jy ! Component: 1850 - total flux cleaned = -0.00343045 Jy ! Component: 1900 - total flux cleaned = -0.00347864 Jy ! Component: 1950 - total flux cleaned = -0.00352637 Jy ! Component: 2000 - total flux cleaned = -0.00355779 Jy ! Component: 2050 - total flux cleaned = -0.00357339 Jy ! Component: 2100 - total flux cleaned = -0.00361953 Jy ! Component: 2150 - total flux cleaned = -0.00364982 Jy ! Component: 2200 - total flux cleaned = -0.00372505 Jy ! Component: 2250 - total flux cleaned = -0.00371011 Jy ! Component: 2300 - total flux cleaned = -0.00376923 Jy ! Component: 2350 - total flux cleaned = -0.00374004 Jy ! Component: 2400 - total flux cleaned = -0.00372552 Jy ! Component: 2450 - total flux cleaned = -0.00376873 Jy ! Component: 2500 - total flux cleaned = -0.00375446 Jy ! Component: 2550 - total flux cleaned = -0.00378271 Jy ! Component: 2600 - total flux cleaned = -0.00376855 Jy ! Component: 2650 - total flux cleaned = -0.00376867 Jy ! Component: 2700 - total flux cleaned = -0.00381025 Jy ! Component: 2750 - total flux cleaned = -0.0038102 Jy ! Component: 2800 - total flux cleaned = -0.00383723 Jy ! Component: 2850 - total flux cleaned = -0.0038507 Jy ! Component: 2900 - total flux cleaned = -0.00383736 Jy ! Component: 2950 - total flux cleaned = -0.00387741 Jy ! Component: 3000 - total flux cleaned = -0.0039173 Jy ! Component: 3050 - total flux cleaned = -0.00391731 Jy ! Component: 3100 - total flux cleaned = -0.00395671 Jy ! Component: 3150 - total flux cleaned = -0.00396986 Jy ! Component: 3200 - total flux cleaned = -0.00400895 Jy ! Component: 3250 - total flux cleaned = -0.00397018 Jy ! Component: 3300 - total flux cleaned = -0.0040216 Jy ! Component: 3350 - total flux cleaned = -0.00400893 Jy ! Component: 3400 - total flux cleaned = -0.00402173 Jy ! Component: 3450 - total flux cleaned = -0.00403447 Jy ! Component: 3500 - total flux cleaned = -0.00404704 Jy ! Component: 3550 - total flux cleaned = -0.00403446 Jy ! Component: 3600 - total flux cleaned = -0.00404694 Jy ! Component: 3650 - total flux cleaned = -0.00407181 Jy ! Component: 3700 - total flux cleaned = -0.00404698 Jy ! Component: 3750 - total flux cleaned = -0.00403466 Jy ! Component: 3800 - total flux cleaned = -0.00402236 Jy ! Component: 3850 - total flux cleaned = -0.00403456 Jy ! Component: 3900 - total flux cleaned = -0.00401008 Jy ! Component: 3950 - total flux cleaned = -0.00398577 Jy ! Component: 4000 - total flux cleaned = -0.00397368 Jy ! Component: 4050 - total flux cleaned = -0.00396159 Jy ! Total flux subtracted in 4096 components = -0.0039616 Jy ! Clean residual min=-0.000737 max=0.000776 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.133766 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 289 components and 0.133766 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219g_uvs/J1333-2356_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7859 x 2.071 at 1.835 degrees (North through East) ! Clean map min=-0.0018148 max=0.12014 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1333-2356_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120143 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190125 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.474747 0.474747 0.949495 1.89899 3.79798 7.59596 15.1919 30.3838 60.7677 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.12 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 631.915 quit ! Quitting program ! Log file /scr/pima/bg219g_uvs/J1333-2356_X_uvs.log closed on Thu Apr 7 09:50:35 2016