! Started logfile: /scr/pima/bg219g_uvs/J1333-2356_X_dfm.log on Thu May 19 21:48:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1333-2356_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1333-2356_X_uva.fits
! AN table 1: 30 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.961481 visibilities/baseline/integration-bin.
! Found source: J1333-2356
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15576 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1333-2356_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017679Jy  sigma=19.203115
! Fit after  self-cal, rms=0.882337Jy  sigma=16.560736
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6042 mas, bmaj=1.708 mas, bpa=2.585 degrees
! Estimated noise=0.600536 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0934046 Jy
! Component: 100  -  total flux cleaned = 0.116527 Jy
! Total flux subtracted in 100 components = 0.116527 Jy
! Clean residual min=-0.005731 max=0.009256 Jy/beam
! Clean residual mean=-0.000004 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.116527 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.116527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095896Jy  sigma=1.505844
! Fit after  self-cal, rms=0.095815Jy  sigma=1.504571
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00964079 Jy
! Component: 100  -  total flux cleaned = 0.0139607 Jy
! Total flux subtracted in 100 components = 0.0139607 Jy
! Clean residual min=-0.004507 max=0.006536 Jy/beam
! Clean residual mean=-0.000002 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 0.130487 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.130487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094961Jy  sigma=1.476605
! Fit after  self-cal, rms=0.094940Jy  sigma=1.476371
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7758 mas, bmaj=2.065 mas, bpa=1.404 degrees
! Estimated noise=0.323621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572676 Jy
! Component: 100  -  total flux cleaned = 0.0079118 Jy
! Component: 150  -  total flux cleaned = 0.00835768 Jy
! Component: 200  -  total flux cleaned = 0.00847644 Jy
! Total flux subtracted in 200 components = 0.00847644 Jy
! Clean residual min=-0.003318 max=0.004555 Jy/beam
! Clean residual mean=-0.000002 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.138964 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.138964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094580Jy  sigma=1.468739
! Fit after  self-cal, rms=0.094570Jy  sigma=1.468105
! Inverting map 
! Added new window around map position (-4, 13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396745 Jy
! Component: 100  -  total flux cleaned = 0.00476547 Jy
! Component: 150  -  total flux cleaned = 0.00476897 Jy
! Component: 200  -  total flux cleaned = 0.00477183 Jy
! Total flux subtracted in 200 components = 0.00477183 Jy
! Clean residual min=-0.002844 max=0.003230 Jy/beam
! Clean residual mean=-0.000000 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.143736 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 44 components and 0.143736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094385Jy  sigma=1.464147
! Fit after  self-cal, rms=0.094375Jy  sigma=1.463585
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7758 x 2.065 at 1.404 degrees (North through East)
! Clean map  min=-0.0024458  max=0.12038 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        1.14     KP        1.00     
!   LA        1.14     MK        0.99     NL        1.00     OV        0.97     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.11     HN        1.14     KP        0.98     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        0.99     KP        1.00     
!   LA        0.92     MK        1.02     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.14     HN        1.07     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        1.12     KP        0.98     
!   LA        1.02     MK        0.96     NL        0.98     OV        0.98     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.07     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.92     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        1.13     KP        0.98     
!   LA        0.95     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.02     KP        0.98     
!   LA        1.10     MK        0.99     NL        0.94     OV        0.96     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.14     KP        1.00     
!   LA        1.13     MK        1.02     NL        0.99     OV        0.95     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.11     HN        1.08     KP        0.95     
!   LA        0.89     MK        1.08     NL        0.96     OV        0.96     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        1.05     KP        1.04     
!   LA        0.93     MK        1.04     NL        1.01     OV        0.93     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        1.05     KP        0.98     
!   LA        0.98     MK        1.03     NL        0.94     OV        0.97     
!   PT        1.00     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.094375Jy  sigma=1.463585
! Fit after  self-cal, rms=0.098086Jy  sigma=1.455822
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7773 mas, bmaj=2.055 mas, bpa=1.687 degrees
! Estimated noise=0.324815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.4064e-05 Jy
! Component: 100  -  total flux cleaned = -0.000155556 Jy
! Component: 150  -  total flux cleaned = -0.000127524 Jy
! Component: 200  -  total flux cleaned = -0.000104046 Jy
! Total flux subtracted in 200 components = -0.000104046 Jy
! Clean residual min=-0.001749 max=0.001825 Jy/beam
! Clean residual mean=0.000001 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.143632 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.143632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098064Jy  sigma=1.455482
! Fit after  self-cal, rms=0.098173Jy  sigma=1.455286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098173Jy  sigma=1.455286
! Fit after  self-cal, rms=0.098606Jy  sigma=1.455242
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7778 mas, bmaj=2.055 mas, bpa=1.728 degrees
! Estimated noise=0.324931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.05557e-05 Jy
! Component: 100  -  total flux cleaned = -0.000107102 Jy
! Component: 150  -  total flux cleaned = -8.70268e-05 Jy
! Component: 200  -  total flux cleaned = -5.08202e-05 Jy
! Total flux subtracted in 200 components = -5.08202e-05 Jy
! Clean residual min=-0.001744 max=0.001801 Jy/beam
! Clean residual mean=0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.143581 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.143581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098594Jy  sigma=1.455091
! Fit after  self-cal, rms=0.098602Jy  sigma=1.455083
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.4, 47.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116622 Jy
! Component: 100  -  total flux cleaned = 0.00113219 Jy
! Component: 150  -  total flux cleaned = 0.00115358 Jy
! Component: 200  -  total flux cleaned = 0.00115295 Jy
! Total flux subtracted in 200 components = 0.00115295 Jy
! Clean residual min=-0.001686 max=0.001679 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.144734 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 87 components and 0.144734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098576Jy  sigma=1.454565
! Fit after  self-cal, rms=0.098576Jy  sigma=1.454522
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098576Jy  sigma=1.454522
! Fit after  self-cal, rms=0.099093Jy  sigma=1.455016
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7789 mas, bmaj=2.057 mas, bpa=1.717 degrees
! Estimated noise=0.324955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227103 Jy
! Component: 100  -  total flux cleaned = 0.000179659 Jy
! Component: 150  -  total flux cleaned = 0.000158472 Jy
! Component: 200  -  total flux cleaned = 0.000139717 Jy
! Total flux subtracted in 200 components = 0.000139717 Jy
! Clean residual min=-0.001735 max=0.001627 Jy/beam
! Clean residual mean=0.000000 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.144873 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.144873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099082Jy  sigma=1.454849
! Fit after  self-cal, rms=0.099091Jy  sigma=1.454824
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.6608e-05 Jy
! Component: 100  -  total flux cleaned = -1.65627e-05 Jy
! Component: 150  -  total flux cleaned = -1.60414e-05 Jy
! Component: 200  -  total flux cleaned = -1.61926e-05 Jy
! Total flux subtracted in 200 components = -1.61926e-05 Jy
! Clean residual min=-0.001746 max=0.001631 Jy/beam
! Clean residual mean=0.000000 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.144857 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 103 components and 0.144857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099084Jy  sigma=1.454740
! Fit after  self-cal, rms=0.099083Jy  sigma=1.454737
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099083Jy  sigma=1.454737
! Fit after  self-cal, rms=0.099282Jy  sigma=1.454762
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.093 mas, bmaj=5.514 mas, bpa=8.696 degrees
! Estimated noise=0.425162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000658381 Jy
! Component: 100  -  total flux cleaned = -0.000872554 Jy
! Component: 150  -  total flux cleaned = -0.000973414 Jy
! Component: 200  -  total flux cleaned = -0.00104913 Jy
! Total flux subtracted in 200 components = -0.00104913 Jy
! Clean residual min=-0.001626 max=0.001642 Jy/beam
! Clean residual mean=0.000000 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.143808 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 116 components and 0.143808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099276Jy  sigma=1.454765
! Fit after  self-cal, rms=0.099278Jy  sigma=1.454753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136237 Jy
! Component: 100  -  total flux cleaned = -0.000204407 Jy
! Component: 150  -  total flux cleaned = -0.000242009 Jy
! Component: 200  -  total flux cleaned = -0.000277957 Jy
! Total flux subtracted in 200 components = -0.000277957 Jy
! Clean residual min=-0.001599 max=0.001643 Jy/beam
! Clean residual mean=0.000000 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.14353 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 120 components and 0.14353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099276Jy  sigma=1.454782
! Fit after  self-cal, rms=0.099275Jy  sigma=1.454781
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7795 mas, bmaj=2.058 mas, bpa=1.726 degrees
! Estimated noise=0.324792 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7795 x 2.058 at 1.726 degrees (North through East)
! Clean map  min=-0.0015926  max=0.12063 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6058 mas, bmaj=1.7 mas, bpa=2.907 degrees
! Estimated noise=0.605434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0938522 Jy
! Component: 100  -  total flux cleaned = 0.117249 Jy
! Component: 150  -  total flux cleaned = 0.127167 Jy
! Component: 200  -  total flux cleaned = 0.133082 Jy
! Total flux subtracted in 200 components = 0.133082 Jy
! Clean residual min=-0.003685 max=0.003876 Jy/beam
! Clean residual mean=-0.000001 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.133082 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.133082 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7795 mas, bmaj=2.058 mas, bpa=1.726 degrees
! Estimated noise=0.324792 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00457698 Jy
! Component: 100  -  total flux cleaned = 0.00746015 Jy
! Component: 150  -  total flux cleaned = 0.00948885 Jy
! Component: 200  -  total flux cleaned = 0.0104693 Jy
! Total flux subtracted in 200 components = 0.0104693 Jy
! Clean residual min=-0.001950 max=0.001745 Jy/beam
! Clean residual mean=-0.000000 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.143551 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 30 components and 0.143551 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.093 mas, bmaj=5.514 mas, bpa=8.696 degrees
! Estimated noise=0.425162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011234 Jy
! Component: 100  -  total flux cleaned = 0.00106249 Jy
! Component: 150  -  total flux cleaned = 0.000955753 Jy
! Component: 200  -  total flux cleaned = 0.000831762 Jy
! Total flux subtracted in 200 components = 0.000831762 Jy
! Clean residual min=-0.001831 max=0.001670 Jy/beam
! Clean residual mean=0.000000 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.144383 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114894 Jy
! Component: 100  -  total flux cleaned = -0.000199894 Jy
! Component: 150  -  total flux cleaned = -0.000318606 Jy
! Component: 200  -  total flux cleaned = -0.000392572 Jy
! Total flux subtracted in 200 components = -0.000392572 Jy
! Clean residual min=-0.001723 max=0.001638 Jy/beam
! Clean residual mean=0.000000 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.14399 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 55 components and 0.14399 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7795 mas, bmaj=2.058 mas, bpa=1.726 degrees
! Estimated noise=0.324792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.67193e-05 Jy
! Component: 100  -  total flux cleaned = -6.46671e-06 Jy
! Component: 150  -  total flux cleaned = 5.76675e-05 Jy
! Component: 200  -  total flux cleaned = 6.01227e-05 Jy
! Total flux subtracted in 200 components = 6.01227e-05 Jy
! Clean residual min=-0.001800 max=0.001667 Jy/beam
! Clean residual mean=0.000000 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.14405 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.14405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099306Jy  sigma=1.455265
! Fit after  self-cal, rms=0.099306Jy  sigma=1.455215
wmodel /J1333-2356_X_map.mod
! wmodel: Unable to open new model file: /J1333-2356_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1333-2356_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7795 x 2.058 at 1.726 degrees (North through East)
! Clean map  min=-0.0016288  max=0.12069 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1333-2356_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.120688 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000412683 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.02582 1.02582 2.05165 4.1033 8.2066 16.4132 32.8264 65.6528
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.12 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  292.447 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1333-2356_X_dfm.log closed on Thu May 19 21:48:22 2016