! Started logfile: /scr/pima/bg219g_uvs/J1333-1112_S_uvs.log on Thu Apr  7 07:16:47 2016
obs /scr/pima/bg219g_uvs/J1333-1112_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1333-1112_S_uva.fits
! AN table 1: 31 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J1333-1112
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1736 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1333-1112_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999400Jy  sigma=23.895163
! Fit after  self-cal, rms=0.946080Jy  sigma=22.535958
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.43 mas, bmaj=21.8 mas, bpa=26.51 degrees
! Estimated noise=1.233 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445697 Jy
! Component: 100  -  total flux cleaned = 0.0481823 Jy
! Total flux subtracted in 100 components = 0.0481823 Jy
! Clean residual min=-0.004951 max=0.004898 Jy/beam
! Clean residual mean=0.000011 rms=0.001735 Jy/beam
! Combined flux in latest and established models = 0.0481823 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0481823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058237Jy  sigma=1.275500
! Fit after  self-cal, rms=0.057019Jy  sigma=1.249705
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.871 mas, bmaj=21.8 mas, bpa=24.59 degrees
! Estimated noise=0.806518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311262 Jy
! Component: 100  -  total flux cleaned = 0.00356874 Jy
! Component: 150  -  total flux cleaned = 0.00355235 Jy
! Component: 200  -  total flux cleaned = 0.00314549 Jy
! Total flux subtracted in 200 components = 0.00314549 Jy
! Clean residual min=-0.001591 max=0.001582 Jy/beam
! Clean residual mean=0.000013 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0513278 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 104 components and 0.0513278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056172Jy  sigma=1.226505
! Fit after  self-cal, rms=0.055763Jy  sigma=1.224075
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.871 x 21.8 at 24.59 degrees (North through East)
! Clean map  min=-0.0034425  max=0.053811 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     KP        0.94     LA        0.86     MK        1.00*    
!   NL        1.13     OV        1.00     PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     KP        1.04     LA        0.85     MK        1.00*    
!   NL        1.04     OV        1.09     PT        0.85     
! 
! 
! Fit before self-cal, rms=0.055763Jy  sigma=1.224075
! Fit after  self-cal, rms=0.053505Jy  sigma=1.218504
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.93 mas, bmaj=22.07 mas, bpa=24.96 degrees
! Estimated noise=0.785893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385852 Jy
! Component: 100  -  total flux cleaned = 0.00147007 Jy
! Component: 150  -  total flux cleaned = 0.0019886 Jy
! Component: 200  -  total flux cleaned = 0.00228888 Jy
! Total flux subtracted in 200 components = 0.00228888 Jy
! Clean residual min=-0.001001 max=0.001008 Jy/beam
! Clean residual mean=-0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.0536166 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 163 components and 0.0536166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053342Jy  sigma=1.214679
! Fit after  self-cal, rms=0.053335Jy  sigma=1.213749
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053335Jy  sigma=1.213749
! Fit after  self-cal, rms=0.053544Jy  sigma=1.211625
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.947 mas, bmaj=22.29 mas, bpa=25.44 degrees
! Estimated noise=0.792862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000546907 Jy
! Component: 100  -  total flux cleaned = -0.000661534 Jy
! Component: 150  -  total flux cleaned = -0.000400336 Jy
! Component: 200  -  total flux cleaned = -0.000254724 Jy
! Total flux subtracted in 200 components = -0.000254724 Jy
! Clean residual min=-0.000770 max=0.000766 Jy/beam
! Clean residual mean=-0.000007 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0533619 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 217 components and 0.0533619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053424Jy  sigma=1.209136
! Fit after  self-cal, rms=0.053439Jy  sigma=1.208713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.12039e-05 Jy
! Component: 100  -  total flux cleaned = 0.00036012 Jy
! Component: 150  -  total flux cleaned = 0.000727713 Jy
! Component: 200  -  total flux cleaned = 0.000961788 Jy
! Total flux subtracted in 200 components = 0.000961788 Jy
! Clean residual min=-0.000627 max=0.000629 Jy/beam
! Clean residual mean=-0.000003 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0543237 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 253 components and 0.0543237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053370Jy  sigma=1.207351
! Fit after  self-cal, rms=0.053362Jy  sigma=1.207251
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053362Jy  sigma=1.207251
! Fit after  self-cal, rms=0.053436Jy  sigma=1.205361
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.945 mas, bmaj=22.31 mas, bpa=25.4 degrees
! Estimated noise=0.78829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000571298 Jy
! Component: 100  -  total flux cleaned = 0.000984479 Jy
! Component: 150  -  total flux cleaned = 0.0013271 Jy
! Component: 200  -  total flux cleaned = 0.00164766 Jy
! Total flux subtracted in 200 components = 0.00164766 Jy
! Clean residual min=-0.000523 max=0.000518 Jy/beam
! Clean residual mean=-0.000003 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0559714 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 296 components and 0.0559714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053386Jy  sigma=1.204429
! Fit after  self-cal, rms=0.053447Jy  sigma=1.203898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357352 Jy
! Component: 100  -  total flux cleaned = 0.000386415 Jy
! Component: 150  -  total flux cleaned = 0.00041492 Jy
! Component: 200  -  total flux cleaned = 0.000387419 Jy
! Total flux subtracted in 200 components = 0.000387419 Jy
! Clean residual min=-0.000447 max=0.000444 Jy/beam
! Clean residual mean=-0.000004 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0563588 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 356 components and 0.0563588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053410Jy  sigma=1.203154
! Fit after  self-cal, rms=0.053404Jy  sigma=1.203093
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053404Jy  sigma=1.203093
! Fit after  self-cal, rms=0.053480Jy  sigma=1.202914
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.27 mas, bmaj=22.29 mas, bpa=23.92 degrees
! Estimated noise=0.799403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000388736 Jy
! Component: 100  -  total flux cleaned = 0.000473493 Jy
! Component: 150  -  total flux cleaned = 0.000580353 Jy
! Component: 200  -  total flux cleaned = 0.000760253 Jy
! Total flux subtracted in 200 components = 0.000760253 Jy
! Clean residual min=-0.000417 max=0.000420 Jy/beam
! Clean residual mean=-0.000003 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.057119 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 389 components and 0.057119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053448Jy  sigma=1.202384
! Fit after  self-cal, rms=0.053494Jy  sigma=1.202325
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016066 Jy
! Component: 100  -  total flux cleaned = 0.000160921 Jy
! Component: 150  -  total flux cleaned = 0.000112656 Jy
! Component: 200  -  total flux cleaned = 0.00011512 Jy
! Total flux subtracted in 200 components = 0.00011512 Jy
! Clean residual min=-0.000429 max=0.000427 Jy/beam
! Clean residual mean=-0.000003 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0572342 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 440 components and 0.0572342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053471Jy  sigma=1.202054
! Fit after  self-cal, rms=0.053463Jy  sigma=1.202015
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.938 mas, bmaj=22.32 mas, bpa=25.4 degrees
! Estimated noise=0.785209 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.938 x 22.32 at 25.4 degrees (North through East)
! Clean map  min=-0.0023684  max=0.052184 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.499 mas, bmaj=22.24 mas, bpa=27.17 degrees
! Estimated noise=1.19333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435747 Jy
! Component: 100  -  total flux cleaned = 0.043983 Jy
! Component: 150  -  total flux cleaned = 0.0449304 Jy
! Component: 200  -  total flux cleaned = 0.0447531 Jy
! Total flux subtracted in 200 components = 0.0447531 Jy
! Clean residual min=-0.002617 max=0.002605 Jy/beam
! Clean residual mean=0.000008 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.0447531 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 57 model components to the UV plane model.
! The established model now contains 57 components and 0.0447531 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.938 mas, bmaj=22.32 mas, bpa=25.4 degrees
! Estimated noise=0.785209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104571 Jy
! Component: 100  -  total flux cleaned = 0.000934674 Jy
! Component: 150  -  total flux cleaned = 0.00103738 Jy
! Component: 200  -  total flux cleaned = 0.000958097 Jy
! Total flux subtracted in 200 components = 0.000958097 Jy
! Clean residual min=-0.001268 max=0.001282 Jy/beam
! Clean residual mean=-0.000002 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0457112 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 117 components and 0.0457112 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.27 mas, bmaj=22.29 mas, bpa=23.92 degrees
! Estimated noise=0.799403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289745 Jy
! Component: 100  -  total flux cleaned = -0.0005429 Jy
! Component: 150  -  total flux cleaned = -0.00072238 Jy
! Component: 200  -  total flux cleaned = -0.000530454 Jy
! Total flux subtracted in 200 components = -0.000530454 Jy
! Clean residual min=-0.001127 max=0.001136 Jy/beam
! Clean residual mean=-0.000000 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0451807 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216728 Jy
! Component: 100  -  total flux cleaned = 0.00038882 Jy
! Component: 150  -  total flux cleaned = 0.00059994 Jy
! Component: 200  -  total flux cleaned = 0.000858857 Jy
! Total flux subtracted in 200 components = 0.000858857 Jy
! Clean residual min=-0.002369 max=0.002423 Jy/beam
! Clean residual mean=0.000004 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.0460396 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 184 components and 0.0460396 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.938 mas, bmaj=22.32 mas, bpa=25.4 degrees
! Estimated noise=0.785209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.997e-05 Jy
! Component: 100  -  total flux cleaned = -6.21931e-05 Jy
! Component: 150  -  total flux cleaned = -0.000167507 Jy
! Component: 200  -  total flux cleaned = -0.000402816 Jy
! Total flux subtracted in 200 components = -0.000402816 Jy
! Clean residual min=-0.002129 max=0.002100 Jy/beam
! Clean residual mean=-0.000010 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0456368 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 208 components and 0.0456367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053700Jy  sigma=1.206588
! Fit after  self-cal, rms=0.053699Jy  sigma=1.203659
wmodel /scr/pima/bg219g_uvs/J1333-1112_S_map.mod
! Writing 208 model components to file: /scr/pima/bg219g_uvs/J1333-1112_S_map.mod
wobs /scr/pima/bg219g_uvs/J1333-1112_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219g_uvs/J1333-1112_S_uvs.fits
wwins /scr/pima/bg219g_uvs/J1333-1112_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bg219g_uvs/J1333-1112_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.938 x 22.32 at 25.4 degrees (North through East)
! Clean map  min=-0.0038341  max=0.050395 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1333-1112_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.050395 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000326797 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.94541 1.94541 3.89083 7.78166 15.5633 31.1266 62.2533
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.05 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  154.208 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1333-1112_S_uvs.log closed on Thu Apr  7 07:16:50 2016