! Started logfile: /scr/pima/bg219g_uvs/J1319-2724_S_uvs.log on Thu Apr  7 07:16:10 2016
obs /scr/pima/bg219g_uvs/J1319-2724_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1319-2724_S_uva.fits
! AN table 1: 30 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.486667 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1319-2724
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 876 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219g_uvs/J1319-2724_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999287Jy  sigma=20.807837
! Fit after  self-cal, rms=0.937751Jy  sigma=19.034633
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.9 mas, bmaj=55.4 mas, bpa=23.9 degrees
! Estimated noise=1.64525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0495281 Jy
! Component: 100  -  total flux cleaned = 0.0547238 Jy
! Total flux subtracted in 100 components = 0.0547238 Jy
! Clean residual min=-0.005720 max=0.005762 Jy/beam
! Clean residual mean=-0.000249 rms=0.002403 Jy/beam
! Combined flux in latest and established models = 0.0547238 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0547238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056413Jy  sigma=1.039787
! Fit after  self-cal, rms=0.055572Jy  sigma=1.024460
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.09 mas, bmaj=50.52 mas, bpa=24.11 degrees
! Estimated noise=1.41646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00200976 Jy
! Component: 100  -  total flux cleaned = -0.00256564 Jy
! Component: 150  -  total flux cleaned = -0.00378464 Jy
! Component: 200  -  total flux cleaned = -0.00420886 Jy
! Total flux subtracted in 200 components = -0.00420886 Jy
! Clean residual min=-0.001585 max=0.001584 Jy/beam
! Clean residual mean=-0.000083 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.050515 Jy
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 138 components and 0.050515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054195Jy  sigma=1.002604
! Fit after  self-cal, rms=0.053737Jy  sigma=0.997853
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.09 x 50.52 at 24.11 degrees (North through East)
! Clean map  min=-0.0051604  max=0.059219 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     KP        0.86     LA        1.03     NL        1.00*    
!   OV        1.01     PT        0.95     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     KP        0.92     LA        0.95     NL        1.00*    
!   OV        0.94     PT        0.95     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     KP        0.93     LA        1.01     NL        1.00*    
!   OV        1.02     PT        1.07     
! 
! 
! Fit before self-cal, rms=0.053737Jy  sigma=0.997853
! Fit after  self-cal, rms=0.052793Jy  sigma=1.001936
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.14 mas, bmaj=51.17 mas, bpa=24.13 degrees
! Estimated noise=1.40589 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00210416 Jy
! Component: 100  -  total flux cleaned = -0.00170477 Jy
! Component: 150  -  total flux cleaned = -0.00156798 Jy
! Component: 200  -  total flux cleaned = -0.00157008 Jy
! Total flux subtracted in 200 components = -0.00157008 Jy
! Clean residual min=-0.000956 max=0.000947 Jy/beam
! Clean residual mean=-0.000017 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0489449 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 198 components and 0.0489449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052543Jy  sigma=0.997292
! Fit after  self-cal, rms=0.052459Jy  sigma=0.996417
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052459Jy  sigma=0.996417
! Fit after  self-cal, rms=0.052215Jy  sigma=0.991625
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.15 mas, bmaj=51.18 mas, bpa=24.1 degrees
! Estimated noise=1.38983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143587 Jy
! Component: 100  -  total flux cleaned = 0.000148976 Jy
! Component: 150  -  total flux cleaned = 0.000288321 Jy
! Component: 200  -  total flux cleaned = 0.000416011 Jy
! Total flux subtracted in 200 components = 0.000416011 Jy
! Clean residual min=-0.000508 max=0.000510 Jy/beam
! Clean residual mean=0.000005 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0493609 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 261 components and 0.0493609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052148Jy  sigma=0.990755
! Fit after  self-cal, rms=0.052236Jy  sigma=0.990071
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120811 Jy
! Component: 100  -  total flux cleaned = 0.00034367 Jy
! Component: 150  -  total flux cleaned = 0.000596451 Jy
! Component: 200  -  total flux cleaned = 0.000942192 Jy
! Total flux subtracted in 200 components = 0.000942192 Jy
! Clean residual min=-0.000425 max=0.000432 Jy/beam
! Clean residual mean=0.000005 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0503031 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 314 components and 0.0503031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052191Jy  sigma=0.989487
! Fit after  self-cal, rms=0.052179Jy  sigma=0.989279
! Inverting map 
! Added new window around map position (-66.5, 125).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000788133 Jy
! Component: 100  -  total flux cleaned = 0.000937771 Jy
! Component: 150  -  total flux cleaned = 0.000909784 Jy
! Component: 200  -  total flux cleaned = 0.000874433 Jy
! Total flux subtracted in 200 components = 0.000874433 Jy
! Clean residual min=-0.000648 max=0.000688 Jy/beam
! Clean residual mean=0.000008 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0511775 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 375 components and 0.0511775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052154Jy  sigma=0.989123
! Fit after  self-cal, rms=0.052085Jy  sigma=0.988571
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052085Jy  sigma=0.988571
! Fit after  self-cal, rms=0.051987Jy  sigma=0.988385
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.14 mas, bmaj=51.19 mas, bpa=24.14 degrees
! Estimated noise=1.38839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000918415 Jy
! Component: 100  -  total flux cleaned = 0.00121992 Jy
! Component: 150  -  total flux cleaned = 0.00133894 Jy
! Component: 200  -  total flux cleaned = 0.00129564 Jy
! Total flux subtracted in 200 components = 0.00129564 Jy
! Clean residual min=-0.000963 max=0.000930 Jy/beam
! Clean residual mean=0.000010 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0524732 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 436 components and 0.0524732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051955Jy  sigma=0.988228
! Fit after  self-cal, rms=0.051955Jy  sigma=0.988057
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000518685 Jy
! Component: 100  -  total flux cleaned = 0.000715754 Jy
! Component: 150  -  total flux cleaned = 0.000748776 Jy
! Component: 200  -  total flux cleaned = 0.000705258 Jy
! Total flux subtracted in 200 components = 0.000705258 Jy
! Clean residual min=-0.000941 max=0.000949 Jy/beam
! Clean residual mean=0.000013 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0531784 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 478 components and 0.0531784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051940Jy  sigma=0.988022
! Fit after  self-cal, rms=0.051950Jy  sigma=0.987961
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051950Jy  sigma=0.987961
! Fit after  self-cal, rms=0.051680Jy  sigma=0.987825
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.72 mas, bmaj=49.89 mas, bpa=24.09 degrees
! Estimated noise=1.38808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000434416 Jy
! Component: 100  -  total flux cleaned = 0.000461945 Jy
! Component: 150  -  total flux cleaned = 0.000418875 Jy
! Component: 200  -  total flux cleaned = 0.000383516 Jy
! Total flux subtracted in 200 components = 0.000383516 Jy
! Clean residual min=-0.000864 max=0.000777 Jy/beam
! Clean residual mean=0.000012 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0535619 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 522 components and 0.053562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051663Jy  sigma=0.987765
! Fit after  self-cal, rms=0.051660Jy  sigma=0.987692
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185034 Jy
! Component: 100  -  total flux cleaned = 0.000228778 Jy
! Component: 150  -  total flux cleaned = 0.000209542 Jy
! Component: 200  -  total flux cleaned = 0.000166828 Jy
! Total flux subtracted in 200 components = 0.000166828 Jy
! Clean residual min=-0.000840 max=0.000802 Jy/beam
! Clean residual mean=0.000012 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0537288 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 563 components and 0.0537288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051654Jy  sigma=0.987678
! Fit after  self-cal, rms=0.051662Jy  sigma=0.987645
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.13 mas, bmaj=51.26 mas, bpa=24.21 degrees
! Estimated noise=1.38507 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.13 x 51.26 at 24.21 degrees (North through East)
! Clean map  min=-0.0031854  max=0.057863 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.96 mas, bmaj=55.58 mas, bpa=23.97 degrees
! Estimated noise=1.5715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0406857 Jy
! Component: 100  -  total flux cleaned = 0.0586652 Jy
! Component: 150  -  total flux cleaned = 0.0702192 Jy
! Component: 200  -  total flux cleaned = 0.0780108 Jy
! Total flux subtracted in 200 components = 0.0780108 Jy
! Clean residual min=-0.027740 max=0.024490 Jy/beam
! Clean residual mean=-0.000068 rms=0.006285 Jy/beam
! Combined flux in latest and established models = 0.0780108 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.0780108 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.13 mas, bmaj=51.26 mas, bpa=24.21 degrees
! Estimated noise=1.38507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744798 Jy
! Component: 100  -  total flux cleaned = 0.00986922 Jy
! Component: 150  -  total flux cleaned = 0.0114082 Jy
! Component: 200  -  total flux cleaned = 0.0124588 Jy
! Total flux subtracted in 200 components = 0.0124588 Jy
! Clean residual min=-0.010971 max=0.012832 Jy/beam
! Clean residual mean=-0.000126 rms=0.003618 Jy/beam
! Combined flux in latest and established models = 0.0904696 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 120 components and 0.0904696 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.72 mas, bmaj=49.89 mas, bpa=24.09 degrees
! Estimated noise=1.38808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162638 Jy
! Component: 100  -  total flux cleaned = 0.00212604 Jy
! Component: 150  -  total flux cleaned = 0.00258197 Jy
! Component: 200  -  total flux cleaned = 0.00300031 Jy
! Total flux subtracted in 200 components = 0.00300031 Jy
! Clean residual min=-0.008920 max=0.010962 Jy/beam
! Clean residual mean=-0.000090 rms=0.002867 Jy/beam
! Combined flux in latest and established models = 0.0934699 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463436 Jy
! Component: 100  -  total flux cleaned = 0.000968938 Jy
! Component: 150  -  total flux cleaned = 0.00124394 Jy
! Component: 200  -  total flux cleaned = 0.0014464 Jy
! Total flux subtracted in 200 components = 0.0014464 Jy
! Clean residual min=-0.008632 max=0.010506 Jy/beam
! Clean residual mean=-0.000062 rms=0.002708 Jy/beam
! Combined flux in latest and established models = 0.0949163 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 164 components and 0.0949163 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.13 mas, bmaj=51.26 mas, bpa=24.21 degrees
! Estimated noise=1.38507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.30341e-05 Jy
! Component: 100  -  total flux cleaned = -2.55144e-06 Jy
! Component: 150  -  total flux cleaned = -8.1405e-05 Jy
! Component: 200  -  total flux cleaned = -0.000156455 Jy
! Total flux subtracted in 200 components = -0.000156455 Jy
! Clean residual min=-0.009467 max=0.011522 Jy/beam
! Clean residual mean=-0.000068 rms=0.003087 Jy/beam
! Combined flux in latest and established models = 0.0947599 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 172 components and 0.0947598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056706Jy  sigma=1.074238
! Fit after  self-cal, rms=0.053353Jy  sigma=1.008085
wmodel /scr/pima/bg219g_uvs/J1319-2724_S_map.mod
! Writing 172 model components to file: /scr/pima/bg219g_uvs/J1319-2724_S_map.mod
wobs /scr/pima/bg219g_uvs/J1319-2724_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219g_uvs/J1319-2724_S_uvs.fits
wwins /scr/pima/bg219g_uvs/J1319-2724_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219g_uvs/J1319-2724_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.32236e-05 Jy
! Component: 100  -  total flux cleaned = -0.000253359 Jy
! Component: 150  -  total flux cleaned = 0.000219928 Jy
! Component: 200  -  total flux cleaned = 0.000590399 Jy
! Component: 250  -  total flux cleaned = 0.000872526 Jy
! Component: 300  -  total flux cleaned = 0.00139934 Jy
! Component: 350  -  total flux cleaned = 0.00196689 Jy
! Component: 400  -  total flux cleaned = 0.00274627 Jy
! Component: 450  -  total flux cleaned = 0.00357215 Jy
! Component: 500  -  total flux cleaned = 0.00440662 Jy
! Component: 550  -  total flux cleaned = 0.00528913 Jy
! Component: 600  -  total flux cleaned = 0.00601363 Jy
! Component: 650  -  total flux cleaned = 0.00662252 Jy
! Component: 700  -  total flux cleaned = 0.00708837 Jy
! Component: 750  -  total flux cleaned = 0.00758006 Jy
! Component: 800  -  total flux cleaned = 0.00800007 Jy
! Component: 850  -  total flux cleaned = 0.00841482 Jy
! Component: 900  -  total flux cleaned = 0.00885558 Jy
! Component: 950  -  total flux cleaned = 0.00929042 Jy
! Component: 1000  -  total flux cleaned = 0.00965847 Jy
! Component: 1050  -  total flux cleaned = 0.0100837 Jy
! Component: 1100  -  total flux cleaned = 0.010475 Jy
! Component: 1150  -  total flux cleaned = 0.0108337 Jy
! Component: 1200  -  total flux cleaned = 0.0111598 Jy
! Component: 1250  -  total flux cleaned = 0.0116039 Jy
! Component: 1300  -  total flux cleaned = 0.0120184 Jy
! Component: 1350  -  total flux cleaned = 0.0123151 Jy
! Component: 1400  -  total flux cleaned = 0.0126137 Jy
! Component: 1450  -  total flux cleaned = 0.0127948 Jy
! Component: 1500  -  total flux cleaned = 0.012978 Jy
! Component: 1550  -  total flux cleaned = 0.013227 Jy
! Component: 1600  -  total flux cleaned = 0.0135117 Jy
! Component: 1650  -  total flux cleaned = 0.013834 Jy
! Component: 1700  -  total flux cleaned = 0.0141633 Jy
! Component: 1750  -  total flux cleaned = 0.0144998 Jy
! Component: 1800  -  total flux cleaned = 0.0147044 Jy
! Component: 1850  -  total flux cleaned = 0.0148805 Jy
! Component: 1900  -  total flux cleaned = 0.0150982 Jy
! Component: 1950  -  total flux cleaned = 0.0153214 Jy
! Component: 2000  -  total flux cleaned = 0.0155518 Jy
! Component: 2050  -  total flux cleaned = 0.0157475 Jy
! Component: 2100  -  total flux cleaned = 0.0159496 Jy
! Component: 2150  -  total flux cleaned = 0.0161162 Jy
! Component: 2200  -  total flux cleaned = 0.0163306 Jy
! Component: 2250  -  total flux cleaned = 0.0164623 Jy
! Component: 2300  -  total flux cleaned = 0.0166883 Jy
! Component: 2350  -  total flux cleaned = 0.016921 Jy
! Component: 2400  -  total flux cleaned = 0.0171617 Jy
! Component: 2450  -  total flux cleaned = 0.0173103 Jy
! Component: 2500  -  total flux cleaned = 0.0175143 Jy
! Component: 2550  -  total flux cleaned = 0.0177771 Jy
! Component: 2600  -  total flux cleaned = 0.0179951 Jy
! Component: 2650  -  total flux cleaned = 0.0181626 Jy
! Component: 2700  -  total flux cleaned = 0.0184514 Jy
! Component: 2750  -  total flux cleaned = 0.0186308 Jy
! Component: 2800  -  total flux cleaned = 0.018876 Jy
! Component: 2850  -  total flux cleaned = 0.0190668 Jy
! Component: 2900  -  total flux cleaned = 0.019261 Jy
! Component: 2950  -  total flux cleaned = 0.0195965 Jy
! Component: 3000  -  total flux cleaned = 0.0198741 Jy
! Component: 3050  -  total flux cleaned = 0.0200886 Jy
! Component: 3100  -  total flux cleaned = 0.0204572 Jy
! Component: 3150  -  total flux cleaned = 0.020762 Jy
! Component: 3200  -  total flux cleaned = 0.0207632 Jy
! Component: 3250  -  total flux cleaned = 0.0208444 Jy
! Component: 3300  -  total flux cleaned = 0.0210123 Jy
! Component: 3350  -  total flux cleaned = 0.0210984 Jy
! Component: 3400  -  total flux cleaned = 0.0211872 Jy
! Component: 3450  -  total flux cleaned = 0.0211887 Jy
! Component: 3500  -  total flux cleaned = 0.0213785 Jy
! Component: 3550  -  total flux cleaned = 0.0214768 Jy
! Component: 3600  -  total flux cleaned = 0.0215781 Jy
! Component: 3650  -  total flux cleaned = 0.0217893 Jy
! Component: 3700  -  total flux cleaned = 0.0217919 Jy
! Component: 3750  -  total flux cleaned = 0.0220163 Jy
! Component: 3800  -  total flux cleaned = 0.0221315 Jy
! Component: 3850  -  total flux cleaned = 0.0221314 Jy
! Component: 3900  -  total flux cleaned = 0.0223764 Jy
! Component: 3950  -  total flux cleaned = 0.0225032 Jy
! Component: 4000  -  total flux cleaned = 0.0226341 Jy
! Component: 4050  -  total flux cleaned = 0.0227689 Jy
! Total flux subtracted in 4096 components = 0.022907 Jy
! Clean residual min=-0.007574 max=0.007831 Jy/beam
! Clean residual mean=0.000121 rms=0.002600 Jy/beam
! Combined flux in latest and established models = 0.117667 Jy
keep
! Adding 234 model components to the UV plane model.
! The established model now contains 406 components and 0.117667 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219g_uvs/J1319-2724_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.13 x 51.26 at 24.21 degrees (North through East)
! Clean map  min=-0.014561  max=0.041724 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1319-2724_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0417241 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0033386 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -24.0048 24.0048 48.0097 96.0193
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.01 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  12.497 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1319-2724_S_uvs.log closed on Thu Apr  7 07:16:15 2016