! Started logfile: /scr/pima/bg219g_uvs/J1316-3338_X_dfm.log on Thu May 19 21:46:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1316-3338_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1316-3338_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.75873 visibilities/baseline/integration-bin.
! Found source: J1316-3338
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1316-3338_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.087294Jy  sigma=22.249602
! Fit after  self-cal, rms=0.616194Jy  sigma=12.118579
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6026 mas, bmaj=1.673 mas, bpa=-0.9695 degrees
! Estimated noise=0.703212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.306678 Jy
! Component: 100  -  total flux cleaned = 0.373809 Jy
! Total flux subtracted in 100 components = 0.373809 Jy
! Clean residual min=-0.018909 max=0.035147 Jy/beam
! Clean residual mean=0.000003 rms=0.003886 Jy/beam
! Combined flux in latest and established models = 0.373809 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.373809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.130069Jy  sigma=2.519477
! Fit after  self-cal, rms=0.129974Jy  sigma=2.518360
! Inverting map 
! Added new window around map position (-1, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311773 Jy
! Component: 100  -  total flux cleaned = 0.0481357 Jy
! Total flux subtracted in 100 components = 0.0481357 Jy
! Clean residual min=-0.017347 max=0.027230 Jy/beam
! Clean residual mean=-0.000005 rms=0.003066 Jy/beam
! Combined flux in latest and established models = 0.421945 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.421945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119865Jy  sigma=2.249078
! Fit after  self-cal, rms=0.119295Jy  sigma=2.232708
! Inverting map 
! Added new window around map position (1, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221526 Jy
! Component: 100  -  total flux cleaned = 0.0362816 Jy
! Total flux subtracted in 100 components = 0.0362816 Jy
! Clean residual min=-0.011851 max=0.015642 Jy/beam
! Clean residual mean=-0.000009 rms=0.002345 Jy/beam
! Combined flux in latest and established models = 0.458226 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.458226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114411Jy  sigma=2.097819
! Fit after  self-cal, rms=0.114237Jy  sigma=2.092042
! Inverting map 
! Added new window around map position (8.2, -26.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133117 Jy
! Component: 100  -  total flux cleaned = 0.0190378 Jy
! Total flux subtracted in 100 components = 0.0190378 Jy
! Clean residual min=-0.010033 max=0.010308 Jy/beam
! Clean residual mean=-0.000011 rms=0.002106 Jy/beam
! Combined flux in latest and established models = 0.477264 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.477264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112151Jy  sigma=2.035453
! Fit after  self-cal, rms=0.112014Jy  sigma=2.032828
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7817 mas, bmaj=2.07 mas, bpa=-0.8517 degrees
! Estimated noise=0.478659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121825 Jy
! Component: 100  -  total flux cleaned = 0.0142557 Jy
! Component: 150  -  total flux cleaned = 0.0159351 Jy
! Component: 200  -  total flux cleaned = 0.0171194 Jy
! Total flux subtracted in 200 components = 0.0171194 Jy
! Clean residual min=-0.011628 max=0.014346 Jy/beam
! Clean residual mean=-0.000002 rms=0.002978 Jy/beam
! Combined flux in latest and established models = 0.494384 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 0.494384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110362Jy  sigma=1.996591
! Fit after  self-cal, rms=0.110210Jy  sigma=1.993120
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7817 x 2.07 at -0.8517 degrees (North through East)
! Clean map  min=-0.011195  max=0.37796 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        1.14     KP        1.01     
!   LA        1.03     MK        0.99     NL        1.07     OV        0.95     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.12     KP        1.01     
!   LA        0.99     MK        0.99     NL        1.08     OV        0.96     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.14     KP        1.00     
!   LA        0.98     MK        0.97     NL        1.09     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.04     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.09     OV        0.94     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.07     KP        0.98     
!   LA        1.04     MK        1.00     NL        1.13     OV        0.94     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        1.03     KP        0.97     
!   LA        1.07     MK        1.00     NL        1.08     OV        0.93     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.16     KP        1.01     
!   LA        0.96     MK        0.99     NL        1.09     OV        0.92     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.03     HN        1.16     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.05     OV        0.96     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.04     KP        1.00     
!   LA        0.98     MK        1.04     NL        1.05     OV        0.96     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.07     KP        0.97     
!   LA        1.00     MK        0.98     NL        1.06     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.20     KP        1.00     
!   LA        1.00     MK        1.05     NL        1.04     OV        0.93     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.16     KP        1.01     
!   LA        1.01     MK        0.98     NL        1.05     OV        0.91     
!   PT        0.98     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.110210Jy  sigma=1.993120
! Fit after  self-cal, rms=0.109581Jy  sigma=1.932887
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7844 mas, bmaj=2.064 mas, bpa=-0.7213 degrees
! Estimated noise=0.479112 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133213 Jy
! Component: 100  -  total flux cleaned = 0.015701 Jy
! Component: 150  -  total flux cleaned = 0.0163844 Jy
! Component: 200  -  total flux cleaned = 0.0163842 Jy
! Total flux subtracted in 200 components = 0.0163842 Jy
! Clean residual min=-0.007077 max=0.009731 Jy/beam
! Clean residual mean=-0.000004 rms=0.001984 Jy/beam
! Combined flux in latest and established models = 0.510768 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 60 components and 0.510768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107543Jy  sigma=1.887987
! Fit after  self-cal, rms=0.107457Jy  sigma=1.885388
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107457Jy  sigma=1.885388
! Fit after  self-cal, rms=0.106907Jy  sigma=1.865654
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7865 mas, bmaj=2.067 mas, bpa=-0.8084 degrees
! Estimated noise=0.476353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010983 Jy
! Component: 100  -  total flux cleaned = -0.00145576 Jy
! Component: 150  -  total flux cleaned = -0.00174042 Jy
! Component: 200  -  total flux cleaned = -0.00173326 Jy
! Total flux subtracted in 200 components = -0.00173326 Jy
! Clean residual min=-0.006242 max=0.008532 Jy/beam
! Clean residual mean=-0.000001 rms=0.001679 Jy/beam
! Combined flux in latest and established models = 0.509035 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.509035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106365Jy  sigma=1.857771
! Fit after  self-cal, rms=0.106335Jy  sigma=1.857057
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848732 Jy
! Component: 100  -  total flux cleaned = 0.0119633 Jy
! Component: 150  -  total flux cleaned = 0.0134464 Jy
! Component: 200  -  total flux cleaned = 0.0140212 Jy
! Total flux subtracted in 200 components = 0.0140212 Jy
! Clean residual min=-0.005692 max=0.005877 Jy/beam
! Clean residual mean=-0.000007 rms=0.001387 Jy/beam
! Combined flux in latest and established models = 0.523056 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 98 components and 0.523056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105558Jy  sigma=1.840607
! Fit after  self-cal, rms=0.105457Jy  sigma=1.838795
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105457Jy  sigma=1.838795
! Fit after  self-cal, rms=0.105622Jy  sigma=1.826599
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7873 mas, bmaj=2.068 mas, bpa=-0.7999 degrees
! Estimated noise=0.4749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000255825 Jy
! Component: 100  -  total flux cleaned = -0.000139489 Jy
! Component: 150  -  total flux cleaned = -0.000234559 Jy
! Component: 200  -  total flux cleaned = -0.000234271 Jy
! Total flux subtracted in 200 components = -0.000234271 Jy
! Clean residual min=-0.005386 max=0.004791 Jy/beam
! Clean residual mean=-0.000002 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.522822 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 109 components and 0.522822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105385Jy  sigma=1.823390
! Fit after  self-cal, rms=0.105382Jy  sigma=1.823117
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554047 Jy
! Component: 100  -  total flux cleaned = 0.000478876 Jy
! Component: 150  -  total flux cleaned = 0.000617894 Jy
! Component: 200  -  total flux cleaned = 0.000682551 Jy
! Total flux subtracted in 200 components = 0.000682551 Jy
! Clean residual min=-0.005292 max=0.004781 Jy/beam
! Clean residual mean=-0.000002 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.523504 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 114 components and 0.523504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105280Jy  sigma=1.821395
! Fit after  self-cal, rms=0.105269Jy  sigma=1.821282
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105269Jy  sigma=1.821282
! Fit after  self-cal, rms=0.105116Jy  sigma=1.820485
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=7.504 mas, bpa=5.194 degrees
! Estimated noise=0.616165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00233612 Jy
! Component: 100  -  total flux cleaned = -0.00213384 Jy
! Component: 150  -  total flux cleaned = -0.00189186 Jy
! Component: 200  -  total flux cleaned = -0.00170999 Jy
! Total flux subtracted in 200 components = -0.00170999 Jy
! Clean residual min=-0.006093 max=0.005771 Jy/beam
! Clean residual mean=-0.000002 rms=0.001726 Jy/beam
! Combined flux in latest and established models = 0.521794 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 124 components and 0.521794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105033Jy  sigma=1.819817
! Fit after  self-cal, rms=0.104994Jy  sigma=1.819225
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000441679 Jy
! Component: 100  -  total flux cleaned = 0.000507645 Jy
! Component: 150  -  total flux cleaned = 0.000410711 Jy
! Component: 200  -  total flux cleaned = 0.000367896 Jy
! Total flux subtracted in 200 components = 0.000367896 Jy
! Clean residual min=-0.005893 max=0.005663 Jy/beam
! Clean residual mean=-0.000002 rms=0.001695 Jy/beam
! Combined flux in latest and established models = 0.522162 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 127 components and 0.522162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105003Jy  sigma=1.819088
! Fit after  self-cal, rms=0.104985Jy  sigma=1.818862
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7883 mas, bmaj=2.07 mas, bpa=-0.8016 degrees
! Estimated noise=0.473066 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7883 x 2.07 at -0.8016 degrees (North through East)
! Clean map  min=-0.0044919  max=0.37864 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6065 mas, bmaj=1.67 mas, bpa=-0.8613 degrees
! Estimated noise=0.700344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.305098 Jy
! Component: 100  -  total flux cleaned = 0.374976 Jy
! Component: 150  -  total flux cleaned = 0.405345 Jy
! Component: 200  -  total flux cleaned = 0.424989 Jy
! Total flux subtracted in 200 components = 0.424989 Jy
! Clean residual min=-0.012330 max=0.016819 Jy/beam
! Clean residual mean=-0.000002 rms=0.002265 Jy/beam
! Combined flux in latest and established models = 0.424989 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.424989 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7883 mas, bmaj=2.07 mas, bpa=-0.8016 degrees
! Estimated noise=0.473066 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248959 Jy
! Component: 100  -  total flux cleaned = 0.0402689 Jy
! Component: 150  -  total flux cleaned = 0.0518838 Jy
! Component: 200  -  total flux cleaned = 0.0610121 Jy
! Total flux subtracted in 200 components = 0.0610121 Jy
! Clean residual min=-0.006392 max=0.008080 Jy/beam
! Clean residual mean=0.000008 rms=0.001646 Jy/beam
! Combined flux in latest and established models = 0.486001 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 59 components and 0.486001 Jy
! Inverting map 
! Added new window around map position (0.8, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0074278 Jy
! Component: 100  -  total flux cleaned = 0.0117972 Jy
! Component: 150  -  total flux cleaned = 0.0155003 Jy
! Component: 200  -  total flux cleaned = 0.0186693 Jy
! Total flux subtracted in 200 components = 0.0186693 Jy
! Clean residual min=-0.005675 max=0.006236 Jy/beam
! Clean residual mean=0.000003 rms=0.001272 Jy/beam
! Combined flux in latest and established models = 0.504671 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 77 components and 0.504671 Jy
! Inverting map 
! Added new window around map position (28.4, 36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00500126 Jy
! Component: 100  -  total flux cleaned = 0.00736837 Jy
! Component: 150  -  total flux cleaned = 0.0091756 Jy
! Component: 200  -  total flux cleaned = 0.0108865 Jy
! Total flux subtracted in 200 components = 0.0108865 Jy
! Clean residual min=-0.005304 max=0.004256 Jy/beam
! Clean residual mean=0.000004 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.515557 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 97 components and 0.515557 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=7.504 mas, bpa=5.194 degrees
! Estimated noise=0.616165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340616 Jy
! Component: 100  -  total flux cleaned = 0.0055702 Jy
! Component: 150  -  total flux cleaned = 0.00655755 Jy
! Component: 200  -  total flux cleaned = 0.0072374 Jy
! Total flux subtracted in 200 components = 0.0072374 Jy
! Clean residual min=-0.005528 max=0.004439 Jy/beam
! Clean residual mean=0.000007 rms=0.001553 Jy/beam
! Combined flux in latest and established models = 0.522794 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000517529 Jy
! Component: 100  -  total flux cleaned = 0.000954162 Jy
! Component: 150  -  total flux cleaned = 0.00131971 Jy
! Component: 200  -  total flux cleaned = 0.00151324 Jy
! Total flux subtracted in 200 components = 0.00151324 Jy
! Clean residual min=-0.005483 max=0.004684 Jy/beam
! Clean residual mean=0.000006 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.524308 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.524308 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7883 mas, bmaj=2.07 mas, bpa=-0.8016 degrees
! Estimated noise=0.473066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305889 Jy
! Component: 100  -  total flux cleaned = -0.000214851 Jy
! Component: 150  -  total flux cleaned = -0.000291246 Jy
! Component: 200  -  total flux cleaned = -0.00028994 Jy
! Total flux subtracted in 200 components = -0.00028994 Jy
! Clean residual min=-0.004782 max=0.003738 Jy/beam
! Clean residual mean=0.000002 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.524018 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.524018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104605Jy  sigma=1.814542
! Fit after  self-cal, rms=0.104512Jy  sigma=1.812942
wmodel /J1316-3338_X_map.mod
! wmodel: Unable to open new model file: /J1316-3338_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1316-3338_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7883 x 2.07 at -0.8016 degrees (North through East)
! Clean map  min=-0.003976  max=0.3703 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1316-3338_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.370299 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000963055 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.780224 0.780224 1.56045 3.1209 6.24179 12.4836 24.9672 49.9343 99.8687
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.37 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  384.504 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1316-3338_X_dfm.log closed on Thu May 19 21:46:58 2016