! Started logfile: /scr/pima/bg219g_uvs/J1313-2722_X_dfm.log on Thu May 19 21:46:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219g_uvs/J1313-2722_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219g_uvs/J1313-2722_X_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.796169 visibilities/baseline/integration-bin.
! Found source: J1313-2722
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12468 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1313-2722_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007366Jy  sigma=18.856499
! Fit after  self-cal, rms=0.908157Jy  sigma=17.024008
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5731 mas, bmaj=1.636 mas, bpa=5.033 degrees
! Estimated noise=0.690001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0676892 Jy
! Component: 100  -  total flux cleaned = 0.0854643 Jy
! Total flux subtracted in 100 components = 0.0854643 Jy
! Clean residual min=-0.010141 max=0.026017 Jy/beam
! Clean residual mean=-0.000001 rms=0.002799 Jy/beam
! Combined flux in latest and established models = 0.0854643 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0854643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097653Jy  sigma=1.639868
! Fit after  self-cal, rms=0.097248Jy  sigma=1.631316
! Inverting map 
! Added new window around map position (-1.4, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225711 Jy
! Component: 100  -  total flux cleaned = 0.0319897 Jy
! Total flux subtracted in 100 components = 0.0319897 Jy
! Clean residual min=-0.007226 max=0.011553 Jy/beam
! Clean residual mean=-0.000001 rms=0.001728 Jy/beam
! Combined flux in latest and established models = 0.117454 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.117454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091917Jy  sigma=1.509707
! Fit after  self-cal, rms=0.090593Jy  sigma=1.485200
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00969002 Jy
! Component: 100  -  total flux cleaned = 0.0136704 Jy
! Total flux subtracted in 100 components = 0.0136704 Jy
! Clean residual min=-0.005552 max=0.005897 Jy/beam
! Clean residual mean=-0.000000 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 0.131124 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.131124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089441Jy  sigma=1.457377
! Fit after  self-cal, rms=0.089283Jy  sigma=1.454586
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7704 mas, bmaj=2.004 mas, bpa=3.613 degrees
! Estimated noise=0.357532 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00601654 Jy
! Component: 100  -  total flux cleaned = 0.00905413 Jy
! Component: 150  -  total flux cleaned = 0.00995091 Jy
! Component: 200  -  total flux cleaned = 0.0105185 Jy
! Total flux subtracted in 200 components = 0.0105185 Jy
! Clean residual min=-0.003379 max=0.004291 Jy/beam
! Clean residual mean=-0.000000 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.141643 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.141643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088932Jy  sigma=1.444587
! Fit after  self-cal, rms=0.088885Jy  sigma=1.443812
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7704 x 2.004 at 3.613 degrees (North through East)
! Clean map  min=-0.0032127  max=0.088076 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.12     HN        0.95     KP        0.99     
!   LA        0.94     MK        0.94     NL        1.04     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.10     KP        1.00     
!   LA        1.00     MK        0.90     NL        1.06     OV        0.96     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.14     HN        1.09     KP        0.93     
!   LA        0.99     MK        0.92     NL        1.05     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.06     KP        0.99     
!   LA        1.07     MK        0.84     NL        0.99     OV        0.91     
!   PT        1.00     SC        1.09     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.13     KP        1.04     
!   LA        0.85     MK        0.95     NL        0.99     OV        0.96     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.12     HN        1.09     KP        0.95     
!   LA        1.00     MK        1.02     NL        1.07     OV        0.94     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        1.06     KP        0.98     
!   LA        0.98     MK        0.93     NL        1.06     OV        0.97     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.08     KP        0.93     
!   LA        0.91     MK        0.86     NL        1.10     OV        0.93     
!   PT        1.11     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        1.04     KP        0.97     
!   LA        0.98     MK        0.89     NL        1.02     OV        0.92     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.088885Jy  sigma=1.443812
! Fit after  self-cal, rms=0.088640Jy  sigma=1.436934
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7631 mas, bmaj=1.991 mas, bpa=3.002 degrees
! Estimated noise=0.3498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000786976 Jy
! Component: 100  -  total flux cleaned = 0.000612499 Jy
! Component: 150  -  total flux cleaned = 0.000394034 Jy
! Component: 200  -  total flux cleaned = 0.000303295 Jy
! Total flux subtracted in 200 components = 0.000303295 Jy
! Clean residual min=-0.002648 max=0.002568 Jy/beam
! Clean residual mean=-0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.141946 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.141946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088579Jy  sigma=1.435809
! Fit after  self-cal, rms=0.088686Jy  sigma=1.435262
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088686Jy  sigma=1.435262
! Fit after  self-cal, rms=0.088732Jy  sigma=1.435223
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7627 mas, bmaj=1.991 mas, bpa=2.945 degrees
! Estimated noise=0.349498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.41236e-05 Jy
! Component: 100  -  total flux cleaned = 2.87265e-05 Jy
! Component: 150  -  total flux cleaned = -7.38576e-05 Jy
! Component: 200  -  total flux cleaned = -0.000141239 Jy
! Total flux subtracted in 200 components = -0.000141239 Jy
! Clean residual min=-0.002589 max=0.002337 Jy/beam
! Clean residual mean=-0.000000 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.141805 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.141805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088705Jy  sigma=1.434868
! Fit after  self-cal, rms=0.088708Jy  sigma=1.434782
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.35409e-05 Jy
! Component: 100  -  total flux cleaned = 5.23941e-05 Jy
! Component: 150  -  total flux cleaned = -2.84428e-05 Jy
! Component: 200  -  total flux cleaned = -0.000120095 Jy
! Total flux subtracted in 200 components = -0.000120095 Jy
! Clean residual min=-0.002564 max=0.002233 Jy/beam
! Clean residual mean=-0.000000 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.141685 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.141685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088691Jy  sigma=1.434616
! Fit after  self-cal, rms=0.088687Jy  sigma=1.434571
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088687Jy  sigma=1.434571
! Fit after  self-cal, rms=0.088547Jy  sigma=1.434553
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7633 mas, bmaj=1.993 mas, bpa=2.964 degrees
! Estimated noise=0.349375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.5896e-05 Jy
! Component: 100  -  total flux cleaned = -9.36207e-05 Jy
! Component: 150  -  total flux cleaned = -0.000180871 Jy
! Component: 200  -  total flux cleaned = -0.000244294 Jy
! Total flux subtracted in 200 components = -0.000244294 Jy
! Clean residual min=-0.002526 max=0.002136 Jy/beam
! Clean residual mean=-0.000000 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.141441 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.14144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088534Jy  sigma=1.434433
! Fit after  self-cal, rms=0.088531Jy  sigma=1.434403
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111718 Jy
! Component: 100  -  total flux cleaned = 8.08794e-05 Jy
! Component: 150  -  total flux cleaned = 2.26091e-05 Jy
! Component: 200  -  total flux cleaned = -1.79618e-05 Jy
! Total flux subtracted in 200 components = -1.79618e-05 Jy
! Clean residual min=-0.002487 max=0.002079 Jy/beam
! Clean residual mean=-0.000000 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.141423 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.141423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088523Jy  sigma=1.434323
! Fit after  self-cal, rms=0.088520Jy  sigma=1.434296
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088520Jy  sigma=1.434296
! Fit after  self-cal, rms=0.088431Jy  sigma=1.434287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.255 mas, bmaj=6.224 mas, bpa=12.06 degrees
! Estimated noise=0.478322 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285282 Jy
! Component: 100  -  total flux cleaned = 0.000226793 Jy
! Component: 150  -  total flux cleaned = 0.000175499 Jy
! Component: 200  -  total flux cleaned = 0.000121139 Jy
! Total flux subtracted in 200 components = 0.000121139 Jy
! Clean residual min=-0.002845 max=0.002372 Jy/beam
! Clean residual mean=-0.000001 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.141544 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 48 components and 0.141544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088428Jy  sigma=1.434288
! Fit after  self-cal, rms=0.088422Jy  sigma=1.434258
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111131 Jy
! Component: 100  -  total flux cleaned = 6.00507e-05 Jy
! Component: 150  -  total flux cleaned = 1.69703e-05 Jy
! Component: 200  -  total flux cleaned = -2.02787e-05 Jy
! Total flux subtracted in 200 components = -2.02787e-05 Jy
! Clean residual min=-0.002825 max=0.002330 Jy/beam
! Clean residual mean=-0.000001 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.141523 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.141523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088422Jy  sigma=1.434309
! Fit after  self-cal, rms=0.088419Jy  sigma=1.434286
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7642 mas, bmaj=1.995 mas, bpa=2.985 degrees
! Estimated noise=0.349398 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7642 x 1.995 at 2.985 degrees (North through East)
! Clean map  min=-0.0022674  max=0.08516 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5695 mas, bmaj=1.631 mas, bpa=4.591 degrees
! Estimated noise=0.672219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0688502 Jy
! Component: 100  -  total flux cleaned = 0.0982018 Jy
! Component: 150  -  total flux cleaned = 0.11326 Jy
! Component: 200  -  total flux cleaned = 0.121735 Jy
! Total flux subtracted in 200 components = 0.121735 Jy
! Clean residual min=-0.005021 max=0.005496 Jy/beam
! Clean residual mean=-0.000001 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 0.121735 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.121735 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7642 mas, bmaj=1.995 mas, bpa=2.985 degrees
! Estimated noise=0.349398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00853379 Jy
! Component: 100  -  total flux cleaned = 0.0131703 Jy
! Component: 150  -  total flux cleaned = 0.0159675 Jy
! Component: 200  -  total flux cleaned = 0.0177006 Jy
! Total flux subtracted in 200 components = 0.0177006 Jy
! Clean residual min=-0.002475 max=0.002419 Jy/beam
! Clean residual mean=-0.000001 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.139435 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.139435 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.255 mas, bmaj=6.224 mas, bpa=12.06 degrees
! Estimated noise=0.478322 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146541 Jy
! Component: 100  -  total flux cleaned = 0.00170255 Jy
! Component: 150  -  total flux cleaned = 0.00184108 Jy
! Component: 200  -  total flux cleaned = 0.00193535 Jy
! Total flux subtracted in 200 components = 0.00193535 Jy
! Clean residual min=-0.002813 max=0.002429 Jy/beam
! Clean residual mean=-0.000001 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.141371 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.17604e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100401 Jy
! Component: 150  -  total flux cleaned = 0.000116743 Jy
! Component: 200  -  total flux cleaned = 0.000131876 Jy
! Total flux subtracted in 200 components = 0.000131876 Jy
! Clean residual min=-0.002809 max=0.002398 Jy/beam
! Clean residual mean=-0.000001 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.141502 Jy
! Adding 6 model components to the UV plane model.
! The established model now contains 30 components and 0.141502 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7642 mas, bmaj=1.995 mas, bpa=2.985 degrees
! Estimated noise=0.349398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.56213e-05 Jy
! Component: 100  -  total flux cleaned = -0.000120484 Jy
! Component: 150  -  total flux cleaned = -0.000282991 Jy
! Component: 200  -  total flux cleaned = -0.000331389 Jy
! Total flux subtracted in 200 components = -0.000331389 Jy
! Clean residual min=-0.002260 max=0.002136 Jy/beam
! Clean residual mean=-0.000000 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.141171 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.141171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088451Jy  sigma=1.434794
! Fit after  self-cal, rms=0.088442Jy  sigma=1.434671
wmodel /J1313-2722_X_map.mod
! wmodel: Unable to open new model file: /J1313-2722_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219g_uvs/J1313-2722_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7642 x 1.995 at 2.985 degrees (North through East)
! Clean map  min=-0.0021873  max=0.085224 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219g_uvs/J1313-2722_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0852243 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000548928 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.93229 1.93229 3.86458 7.72917 15.4583 30.9167 61.8333
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.085 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  155.256 
quit
! Quitting program
! Log file /scr/pima/bg219g_uvs/J1313-2722_X_dfm.log closed on Thu May 19 21:46:49 2016